Search NASA⌕ Search

Engineering topics

Li, C.

Publications and source records attributed to Li, C..

At least 19 records

Dense Ru single-atoms integrated with sulfoacids for cellulose valorization to isosorbide

Metal-acid bifunctional catalysts are the unity of two opposites (metal-acid repelling) for cellulosic biomass valorization to isosorbide. It is challenging to improve the selectivity of metal hydrogenation catalysts and their synergism with acids for catalytic hydrolysis and dehydration to achieve substantial isosorbide. Herein, dense Ru single-atoms (10.1 wt% of Ru SAs) are anchored on sulfoacid-functionalized hollow mesoporous carbon shells, designed by assembling silica and 8-hydroxyquinoline-modified chitosan (HQ-CTS) through in situ Stöber templating strategy before pyrolysis and acid treatment. Based on X-ray absorption fine structure and computational modeling results, the structure of Ru SAs is determined as RuN 4 , which is more selective for a transitional glucose hydrogenation to sorbitol than Ru001 of Ru clusters. A lower-energy barrier of 1.21 (0.72) eV is delivered over RuN 4 (Ru001) for glucose hydrogenation (isomerization). These Ru SAs are integrated with sulfoacids (SO 3 H) but resistent against acids, rendering enhanced isosorbide yield in water as compared to Ru clusters, via a one-pot cascade reaction under harsh conditions (220 °C, 6 MPa H 2 ). The elaborately fabricated dense Ru SAs and sulfoacids, achieved by varying the addition time of HQ-CTS during the in situ Stöber templating process, improve the synergism of glucose hydrogenation with cellulose hydrolysis and sorbitol dehydration. In conclusion, this study provides a new idea for rational design of high-performance metal-acid bifunctional catalysts toward one-pot conversion of cellulose to isosorbide.

36 MATERIALS SCIENCE↗

Radio transients and variables in the tenth Deeper, Wider, Faster observing run

The Deeper, Wider, Faster (DWF) program coordinates observations with telescopes across the electromagnetic spectrum, searching for transients on time-scales of milliseconds to days. The tenth DWF observing run was carried out in near real-time during September 2021, and consisted of six consecutive days of observations of the NGC 6744 galaxy group and a field containing the repeating fast radio burst FRB 190711 with the Australian Square Kilometre Array Pathfinder, the Dark Energy Camera, the Hard X-ray Modulation Telescope, and the Parkes 64-m ‘Murriyang’ radio telescope. Here, in this work, we present the results of an image-domain search for transient, variable, and circularly polarized sources carried out with ASKAP, using data from the observing run along with test observations prior to the run and follow-up observations carried out during and after the run. We identified eight variable radio sources, consisting of one pulsar, six stellar systems (five of which exhibit circularly polarized emission), and one previously uncatalogued source. Of particular interest is the detection of pulses from the ultra-cool dwarf SCR J1845–6357 with a period of 14.2 ± 0.3 h in good agreement with the known optical rotation period, making this the slowest rotating radio-loud ultra-cool dwarf discovered.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance in beam tests of irradiated Low Gain Avalanche Detectors for the ATLAS High Granularity Timing Detector

The High Granularity Timing Detector (HGTD) will be installed in the ATLAS detector to mitigate pile-up effects during the High Luminosity (HL) upgrade of the Large Hadron Collider (LHC) at CERN. The design of the HGTD is based on the use of Low Gain Avalanche Detectors (LGADs), with an active thickness of 50 μm, that allow to measure with high-precision the time of arrival of particles. The HGTD will improve the particle-vertex assignment by measuring the track time with a resolution ranging from approximately 30 ps at the beginning of the HL-LHC operations to 50 ps at the end. Performances of several unirradiated, as well as neutron- and proton-irradiated, LGAD sensors from different vendors have been measured in beam test campaigns during the years 2018 and 2019 at CERN SPS and DESY. This paper presents the results obtained with data recorded by an oscilloscope synchronized with a beam telescope which provides particle position information within a resolution of a few μm. Collected charge, time resolution and hit efficiency are presented. In addition to these properties, the charge uniformity is also studied as a function of the position of the incident particle inside the sensor pad.

47 OTHER INSTRUMENTATION↗

Colossal phonon drag enhanced thermopower in lightly doped diamond

Diamond is one of the most studied materials because of its unique combination of remarkable electrical, mechanical, thermal and optical properties. Using a fully self-consistent ab initio theory of coupled electron-phonon transport, we reveal another striking behavior: a huge drag enhancement of the thermopower of lightly doped diamond. Thermopower values of around 100,000 μV K –1 are found at 100 K, significantly exceeding the highest previously measured value in the correlated metal FeSb 2 , and occurring at much higher temperatures. The enormous thermopower in diamond arises primarily from exceptionally weak anharmonic phonon decay around and below 100 K that facilitates efficient momentum exchange between charge carriers and phonons through electron-phonon interactions. Exceedingly large thermoelectric power factors are also identified. Furthermore, this work gives insights into the physics of the coupled electron-phonon system in solids and advances our understanding of thermoelectric transport in the regime of strong drag.

36 MATERIALS SCIENCE↗

A magnetic particle time-of-flight (MagPTOF) diagnostic for measurements of shock and compression-bang time at the NIF [National Ignition Facility]

A magnetic particle time-of-flight (MagPTOF) diagnostic has been designed to measure shock- and compression-bang time using DHe-fusion protons and DD-fusion neutrons, respectively, at the National Ignition Facility (NIF). This capability, in combination with shock-burn weighted areal density measurements, will significantly constrain the modeling of the implosion dynamics. This design is an upgrade to the existing particle time-of-flight (pTOF) diagnostic, which records bang times using DD or DT neutrons with an accuracy better than ±70 ps [H. G. Rinderknecht et al., Rev. Sci. Instrum. 83, 10D902 (2012)]. The inclusion of a deflecting magnet will increase DHe-proton signal-to-background by a factor of 1000, allowing for the first time simultaneous measurements of shock and compression-bang times in DHe-filled surrogate implosions at the NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiation campaign of HPK prototype LGAD sensors for the High-Granularity Timing Detector (HGTD)

In this work, we report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of were irradiated in steps of roughly 2 up to a fluence of 3. As a function of the fluence, the collected charge and time resolution of the irradiated sensors will be reported for operation at °C.

47 OTHER INSTRUMENTATION↗