Search NASA⌕ Search

Engineering topics

Li, C.

Publications and source records attributed to Li, C..

At least 55 records · Page 3

Thermal imaging of high power diode lasers subject to back-irradiance

In this study, CCD-based thermoreflectance imaging and finite element modeling are used to study the two-dimensional (2D) temperature profile of a junction-down broad-area diode laser facet subject to back-irradiance. By determining the temperature rise in the active region (ΔΤAR) at different diode laser optical powers, back-irradiance reflectance levels, and back-irradiance spot locations, we find that ΔΤAR increases by nearly a factor of three when the back-irradiance spot is centered in the absorbing substrate approximately 5 μm away from the active region, a distance roughly equal to half of the back-irradiance spot FWHM (9 μm). This corroborates prior work studying the relationship between the back-irradiance spot location and catastrophic optical damage, suggesting a strong thermal basis for reduced laser lifetime in the presence of back-irradiance for diode lasers fabricated on absorbing substrates.

42 ENGINEERING↗

Deformation and damage of sintered low-porosity aluminum under planar impact: microstructures and mechanisms

In this paper, plate impact experiments are conducted to study compaction and spallation of 5% porosity aluminum. Free surface velocity histories, the Hugoniot elastic limit (HEL), and spall strengths are obtained at different peak stresses and pulse durations. Scanning electron microscopy, electron backscatter diffraction, and X-ray computed tomography are used to characterize 2D and 3D microstructures. 3D void topology analyses yield rich information on size distribution, shape, orientation, and connectivity of voids. HEL decreases/increases with sample thickness/impact velocity and approaches saturation. Its tensile strength increases with increasing peak stress and shock-induced densification. With the enhanced compaction under increasing impact velocities, spall damage modes change from growth of original voids to inter-particle crack propagation and to “random” nucleation of new voids. Such a change in damage mechanism also gives rise to a distinct decrease in damage extent at high impact velocities. Finally, compaction induces strain localizations around the original voids, while subsequent tension results in grain refinement, and shear deformation zones between staggered cracks.

36 MATERIALS SCIENCE↗

Spall damage of a Ta particle-reinforced metallic glass matrix composite under high strain rate loading

We investigate deformation and damage of a Zr-based bulk metallic glass (BMG) and its Ta particle-reinforced composite (MGMC) under impact loading, as well as quasi-static tension for comparison. Yield strength, spall strength, and damage accumulation rate are obtained from free-surface velocity histories, and MGMC appears to be more damage-resistant. Scanning electron microscopy, electron back scattering diffraction and x-ray computed tomography, are utilized for characterizing microstructures, which show features consistent with macroscopic measurements. Different damage and fracture modes are observed for BMG and MGMC. Multiple well-defined spall planes are observed in BMG, while isolated and scattered cracking around reinforced particles dominates fracture of MGMC. Particle–matrix interface serves as the source and barrier to crack nucleation and propagation under both quasi-static and impact loading. Finally, deformation twinning and grain refinement play a key role in plastic deformation during shock loading but not in quasi-static loading. In addition, 3D cup-cone structures are resolved in BMG, but not in MGMC due to its heterogeneous stress field.

36 MATERIALS SCIENCE↗

Evolution of the Reactor Antineutrino Flux and Spectrum at Daya Bay

Here, the Daya Bay experiment has observed correlations between reactor core fuel evolution and changes in the reactor antineutrino flux and energy spectrum. Four antineutrino detectors in two experimental halls were used to identify 2.2 million inverse beta decays (IBDs) over 1230 days spanning multiple fuel cycles for each of six 2.9 GW th reactor cores at the Daya Bay and Ling Ao nuclear power plants. Using detector data spanning effective 239 Pu fission fractions F 239 from 0.25 to 0.35, Daya Bay measures an average IBD yield ¯σf of (5.90±0.13)×10 –43 cm 2 /fission and a fuel-dependent variation in the IBD yield, dσ f /dF 239 , of (–1.86±0.18)×10 –43 cm 2 /fission. This observation rejects the hypothesis of a constant antineutrino flux as a function of the 239 Pu fission fraction at 10 standard deviations. The variation in IBD yield is found to be energy dependent, rejecting the hypothesis of a constant antineutrino energy spectrum at 5.1 standard deviations. While measurements of the evolution in the IBD spectrum show general agreement with predictions from recent reactor models, the measured evolution in total IBD yield disagrees with recent predictions at 3.1σ. This discrepancy indicates that an overall deficit in the measured flux with respect to predictions does not result from equal fractional deficits from the primary fission isotopes 235 U, 239 Pu, 238 U, and 241 Pu. Based on measured IBD yield variations, yields of (6.17±0.17) and (4.27±0.26)×10 –43 cm 2 /fission have been determined for the two dominant fission parent isotopes 235 U and 239 Pu. A 7.8% discrepancy between the observed and predicted 235 U yields suggests that this isotope may be the primary contributor to the reactor antineutrino anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observations of a Coronal Shock Wave and the Production of Solar Energetic Particles

We present a study that clarifies the acceleration source/mechanism of the solar energetic particle (SEP) event on 2011 August 9. Based on the assumption of scatter-free propagation of charged particles along the interplanetary magnetic field, the solar particle release times of the electrons and protons are derived and both found to be in the decay phase of the flare emission. Furthermore, we compare the peak-flux spectra of the in situ particles and the remote-sensing hard X-ray photons and find a weak correlation between them. In particular, we note that an extreme ultraviolet shock wave, presumed to be a signature of coronal mass ejection (CME) shock front on the solar surface, and an associated type II radio burst were observed alongside this event. Under the framework of diffusive shock acceleration, the derived shock compression ratio can accelerate particles with a theoretical spectral index γ=2.14{sub −0.02}{sup +0.01}, which is comparable to the observational index of ∼2.0. Our results appear to support the notion that the coronal shock wave was most likely responsible for the SEP event. Specifically, we find that the electrons were released in a low coronal site at ∼0.58 solar radii, and protons were released when the CME-driven shock propagated to ∼1.38 solar radii. The multi-spacecraft observations, in addition, reveal the connection between the acceleration of shock waves and the release of SEPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of electron antineutrino oscillation based on 1230 days of operation of the Daya Bay experiment

Here, a measurement of electron antineutrino oscillation by the Daya Bay Reactor Neutrino Experiment is described in detail. Six 2.9-GWth nuclear power reactors of the Daya Bay and Ling Ao nuclear power facilities served as intense sources of ¯ν e ’s. Comparison of the ¯ν e rate and energy spectrum measured by antineutrino detectors far from the nuclear reactors (~1500–1950 m) relative to detectors near the reactors (~350–600 m) allowed a precise measurement of ¯ν e disappearance. More than 2.5 million ¯ν e inverse beta-decay interactions were observed, based on the combination of 217 days of operation of six antineutrino detectors (December, 2011–July, 2012) with a subsequent 1013 days using the complete configuration of eight detectors (October, 2012–July, 2015). The ¯ν e rate observed at the far detectors relative to the near detectors showed a significant deficit, R = 0.949 ± 0.002(stat) ± 0.002(syst). The energy dependence of ¯ν e disappearance showed the distinct variation predicted by neutrino oscillation. Analysis using an approximation for the three-flavor oscillation probability yielded the flavor-mixing angle sin 2 2θ 13 = 0.0841 ± 0.0027(stat) ± 0.0019(syst) and the effective neutrino mass-squared difference of |Δm 2 ee | = (2.50 ± 0.06(stat) ± 0.06(syst)) × 10 –3 eV 2 . Analysis using the exact three-flavor probability found Δm 2 32 = (2.45 ± 0.06(stat) ± 0.06(syst)) × 10 –3 eV 2 assuming the normal neutrino mass hierarchy and Δm 2 32 = (–2.56 ± 0.06(stat) ± 0.06(syst)) × 10 –3 eV 2 for the inverted hierarchy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Decade of Global Volcanic SO2 Emissions Measured from Space

The global flux of sulfur dioxide (SO2) emitted by passive volcanic degassing is a key parameter that constrains the fluxes of other volcanic gases (including carbon dioxide, CO2) and toxic trace metals (e.g., mercury). It is also a required input for atmospheric chemistry and climate models, since it impacts the tropospheric burden of sulfate aerosol, a major climate-forcing species. Despite its significance, an inventory of passive volcanic degassing is very difficult to produce, due largely to the patchy spatial and temporal coverage of ground-based SO2 measurements. We report here the first volcanic SO2 emissions inventory derived from global, coincident satellite measurements, made by the Ozone Monitoring Instrument (OMI) on NASA's Aura satellite in 2005-2015. The OMI measurements permit estimation of SO2 emissions from over 90 volcanoes, including new constraints on fluxes from Indonesia, Papua New Guinea, the Aleutian Islands, the Kuril Islands and Kamchatka. On average over the past decade, the volcanic SO2 sources consistently detected from space have discharged a total of approximately 63 kt/day SO2 during passive degassing, or approximately 23 +/- 2 Tg/yr. We find that approximately 30% of the sources show significant decadal trends in SO2 emissions, with positive trends observed at multiple volcanoes in some regions including Vanuatu, southern Japan, Peru and Chile.

Carn, S. A.↗

Observation of β-delayed two-proton emission in the decay of 22 Si

The decay of the lightest nucleus with Tz=-3, 22 Si, was studied by a silicon array. A charged-particle group at 5600 (70) keV in the decay-energy spectrum was identified experimentally as β-delayed two-proton emission from the isobaric analog state (IAS) of 22 Al. Experimental results of the IAS fed by a superallowed Fermi transition were compared with our large-scale shell-model calculations. The ground-state mass of 22 Si was obtained indirectly in the experiment for the first time. Two-proton separation energy for 22 Si is deduced to be -108 (125) keV, which indicates that it is a very marginal candidate for two-proton ground-state emission.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

β -decay study of the T z = - 2 proton-rich nucleus Mg 20

We report the β decay of the drip-line nucleus 20 Mg gives important information on key astrophysical resonances in 20 Na, which are relevant to the onset of the rapid proton capture process. A detailed β-decay spectroscopic study of 20 Mg was performed by a continuous-implantation method. A detection system was specially developed for charged-particle decay studies, giving improved spectroscopic information including the delayed proton energies, the half-life of 20 Mg, the excitation energies, the branching ratios, and the log ft values for the states in 20 Na populated in the β decay of 20 Mg. A new proton branch was observed and the corresponding excited state in 20 Na was proposed. The large isospin asymmetry for the mirror decays of 20 Mg and 20 O was also well reproduced. Lastly, to resolve the long-standing problem about the astrophysically interesting 2645 keV resonance in 20 Na convincingly, a higher-statistics measurement may still be needed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved measurement of the reactor antineutrino flux and spectrum at Daya Bay

Here, a new measurement of the reactor antineutrino flux and energy spectrum by the Daya Bay reactor neutrino experiment is reported. The antineutrinos were generated by six 2.9 GW th nuclear reactors and detected by eight antineutrino detectors deployed in two near (560 m and 600 m flux-weighted baselines) and one far (1640 m flux-weighted baseline) underground experimental halls. With 621 days of data, more than 1.2 million inverse beta decay (IBD) candidates were detected. The IBD yield in the eight detectors was measured, and the ratio of measured to predicted flux was found to be 0.946 ± 0.020 (0.992 ± 0.021) for the Huber+Mueller (ILL+Vogel) model. A 2.9σ deviation was found in the measured IBD positron energy spectrum compared to the predictions. In particular, an excess of events in the region of 4$-$6 MeV was found in the measured spectrum, with a local significance of 4.4σ. Finally, a reactor antineutrino spectrum weighted by the IBD cross section is extracted for model-independent predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intense terahertz radiation from relativistic laser–plasma interactions

The development of tabletop intense terahertz (THz) radiation sources is extremely important for THz science and applications. This study presents our measurements of intense THz radiation from relativistic laser–plasma interactions under different experimental conditions. Several THz generation mechanisms have been proposed and investigated, including coherent transition radiation (CTR) emitted by fast electrons from the target rear surface, transient current radiation at the front of the target, and mode conversion from electron plasma waves (EPWs) to THz waves. Finally, the results indicate that relativistic laser plasma is a promising driver of intense THz radiation sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-depth analysis of chloride treatments for thin-film CdTe solar cells

CdTe thin-film solar cells are now the main industrially established alternative to silicon-based photovoltaics. These cells remain reliant on the so-called chloride activation step in order to achieve high conversion efficiencies. Here, by comparison of effective and ineffective chloride treatments, we show the main role of the chloride process to be the modification of grain boundaries through chlorine accumulation, which leads an increase in the carrier lifetime. It is also demonstrated that while improvements in fill factor and short circuit current may be achieved through use of the ineffective chlorides, or indeed simple air annealing, voltage improvement is linked directly to chlorine incorporation at the grain boundaries. Lastly, this suggests that focus on improved or more controlled grain boundary treatments may provide a route to achieving higher cell voltages and thus efficiencies.

14 SOLAR ENERGY↗

Improved Search for a Light Sterile Neutrino with the Full Configuration of the Daya Bay Experiment

Here this Letter reports an improved search for light sterile neutrino mixing in the electron antineutrino disappearance channel with the full configuration of the Daya Bay Reactor Neutrino Experiment. With an additional 404 days of data collected in eight antineutrino detectors, this search benefits from 3.6 times the statistics available to the previous publication, as well as from improvements in energy calibration and background reduction. A relative comparison of the rate and energy spectrum of reactor antineutrinos in the three experimental halls yields no evidence of sterile neutrino mixing in the 2 x 10 -4 $\lesssim$| Δ$2\atop{41}$| $\lesssim$ 0.3 eV 2 . The resulting limits on sin 2 $2\theta$ 14 are improved by approximately a factor of two over previous results and constitute the most stringent constraints to date in the |Δm$2\atop{41}$| $\lesssim$ 0.2 eV 2 region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiation Effects in Innovative Structural Materials

The extreme radiation environments and demanding structural conditions of next-generation fission and proposed fusion reactors will require high performance materials with very high radiation resistance. Although conventional structural materials such as ferritic/ martensitic steels offer several attractive features, there is value in exploring alternative materials systems that may offer unprecedented radiation stability while also offering good thermomechanical properties. As noted elsewhere, options for designing radiation resistance include (a) the traditional approach of introducing a very high sink strength for recombination of radiation-induced vacancies and interstitials (e.g., Ti-modified stainless steels or 'nano-cluster-strengthened ferritic alloys', (b) utilizing materials with immobile vacancies at the operating temperature (e.g., silicon carbide), and (c) utilizing certain classes of materials that inherently exhibit superior resistance to radiation defect retention and accumulation (e.g., ferritic steels). Three relatively new but promising structural materials systems were selected for investigation, based on their favorable unirradiated mechanical properties and potential for good stability under irradiation: High entropy alloys (HEAs), bulk metallic glass (BMG), and MAX phase ceramics. The high configurational entropy in HEAs might alter point defect (solute and radiation defects) diffusion processes, thus potentially enhancing the recombination of radiation-produced damage. Therefore, HEAs offer the potential of a new class of materials for radiation resistance category (c) mentioned previously. A variety of BMGs such as Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} offer good mechanical properties including fracture toughness values that may exceed 100 MPa-m{sup 1/2} and near net shape fabrication potential. The lack of crystallinity in BMGs prohibits the formation of conventional Frenkel pair defects under irradiation and therefore offer the possibility of another new material system for radiation resistance category (c). MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) have good mechanical properties and contain a nano-laminate structure that could provide a very high point defect sink strength. Due to their refractory nature, many of the MAX phase ceramics may exhibit negligible vacancy mobility up to high temperatures. Therefore, MAX phase ceramics offer the potential to provide radiation resistance in either categories (a) and (b), depending on the operating temperature. For this study, a novel 27%Fe-27%Mn-28%Ni-18%Cr single phase face centered cubic high entropy alloy was synthesized that exhibited good strength and ductility over a wide temperature range. Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} (BAM-11) was selected as a prototypic advanced BMG. Several MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) that have good unirradiated thermal and mechanical properties were also investigated. The irradiation damage behaviors of these three novel materials systems have been studied after fission neutron at ∼75 deg. C up to 1 dpa and Ni ion irradiation at 25- 700 deg. C up to 30 dpa (lower temperatures and doses for the BMGs). All three sets of materials generally exhibited good radiation stability within certain temperature regimes. For example, the BMG exhibited only minor (<10%) change in strength that appeared to saturate after a dose of ∼1 dpa. A key shortcoming of current BMGs are that they can not be used at temperatures >>300 deg. C due to glass to crystalline transition at elevated temperature. The MAX phase ceramics irradiated at 400-700 deg. C appeared to be in the 'low temperature' regime where vacancies are immobile and therefore the radiation hardening saturated at relatively low doses. The Ti{sub 3}SiC{sub 2} MAX phase exhibited the best overall radiation stability over a wide temperature range. The HEA exhibited fine scale dislocation loop formation, no observable cavity swelling and reduced amounts of Cr depletion compared to traditional austenitic Fe-Cr-Ni alloys after ion irradiation, which suggests suppressed point defect and solute diffusion behavior. (authors)

36 MATERIALS SCIENCE↗

Observation of Z b ( 10610 ) and Z b ( 10650 ) Decaying to B Mesons

We detail the analysis of the three-body e + e - → B B ¯ π ± , B B ¯ * π ± , and B * B ¯ * π ± processes, including the first observations of the Z b ± ( 10 610 ) → [ B B ¯ * + c . c . ] ± and Z b ± ( 10 650 ) → [ B * B ¯ * ] ± transitions that are found to dominate the corresponding final states. We measure Born cross sections for the three-body production of σ ( e + e - → [ B B ¯ * + c . c . ] ± π ∓ ) = [ 17.4 ± 1.6 ( stat ) ± 1.9 ( syst ) ] pb and σ ( e + e - → [ B * B ¯ * ] ± π ∓ ) = [ 8.75 ± 1.15 ( stat ) ± 1.04 ( syst ) ] pb and set a 90% C.L. upper limit of σ ( e + e - → [ B B ¯ ] ± π ∓ ) < 2.9 pb . The results are based on a 121.4 fb - 1 data sample collected with the Belle detector at a center-of-mass energy near the Υ ( 10 860 ) peak.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗