Oxidation-Induced Internal Chemical Patterning in Copper–Gold Nanoalloys
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Li, Chaoran
Publications and source records attributed to Li, Chaoran.
Enhancing Stability of Surface Au under Oxidizing Conditions through Reduced Bulk Au Content
Contrary to the common assumption that a higher bulk content of precious metals facilitates the preservation of more surface noble metal by serving as a reservoir for surface enrichment, we demonstrate that a lower bulk content of Au results in a more stable arrangement of Au atoms at the surface of Cu–Au nanoparticles when exposed to an O 2 atmosphere. Using ambient pressure X-ray photoelectron spectroscopy, we investigate the surface segregation and oxidation behavior of Cu–Au nanoparticles across various compositions. Here, our results reveal that in Au-rich nanoparticles exposed to an H 2 atmosphere, surface segregation prompts the formation of a continuous Au-enriched shell, which subsequently oxidizes into a complete CuO x shell upon transitioning to an O 2 atmosphere. Conversely, in Au-poor nanoparticles during H 2 treatment, segregation results in the emergence of Au clusters embedded within the surface layer, persisting upon exposure to O 2 . This unexpected phenomenon shows that reducing the bulk content of precious metals can enhance the surface stability of noble atoms under oxidizing conditions, as further demonstrated by comparing the catalytic performance of Cu–Au nanoparticles with varying Au bulk contents in CO oxidation.
36 MATERIALS SCIENCE↗
Tuning Strong Metal–Support Interactions via Synergistic Alloying
The encapsulation phenomenon associated with strong metal-support interaction (SMSI) has been largely restricted to catalyst systems consisting of group VIII metals with high surface energy and reducible transition metal oxide supports with low surface energy. Here, we demonstrate an encapsulation phenomenon that, while sharing morphological similarities with conventional SMSI, follows a distinctive pathway. This is shown by the encapsulation of CuAu nanoparticles (NPs) supported on highly ordered pyrolytic graphite (HOPG). Through dynamic monitoring of Cu, Au, and Cu 50 Au 50 NPs in an oxidizing atmosphere using ambient-pressure X-ray photoelectron spectroscopy, we show that this spontaneous encapsulation is achieved through the synergistic effect of the alloying elements. Specifically, the surface segregation of Cu promotes dissociative O 2 adsorption, leading to the formation of atomic O species, while the subsurface enrichment of Au hinders O incorporation into the bulk of CuAu NPs. Consequently, O spillover onto the graphite support occurs, resulting in the oxidation of the HOPG surface into graphitic oxide species. The higher affinity of the graphitic oxide species toward the Cu-segregated surface prompts their migration from the HOPG support to encapsulate the CuAu NPs. Finally, these results transcend the conventional SMSI and bear practical implications for the design and development of heterogeneous catalysts, particularly in carbon-supported alloy systems.
36 MATERIALS SCIENCE↗
Effect of the Chemical States of Copper on Methanol Decomposition and Oxidation
Here, the decomposition and oxidation reactions of CH 3 OH over metallic Cu(100) and Cu 2 O-covered Cu(100) surfaces are studied using a combination of in-situ ambient-pressure X-ray photoelectron spectroscopy, Auger electron spectroscopy, and density functional theory calculations. We identify the sequential chemical transformation pathways from bond cleavage to the formation of intermediates and final products under operational conditions. Accumulative surface adsorption of CH 3 O species on metallic Cu(100) impedes the decomposition of CH 3 OH. Co-dosing on metallic Cu(100) with low pressures of 1·10 -4 Torr CH 3 OH + 1·10 -4 Torr O 2 results in partial oxidation of CH 3 OH, where the chemisorbed O ads reduces surface sites available for CH 3 O adsorption, decreasing the surface activity for CH 3 OH decomposition. In contrast, the Cu 2 O overlayer formed under the elevated pressures of 0.33 Torr CH 3 OH + 0.66 Torr O 2 promotes the total oxidation of CH 3 OH into the final products of CO 2 and H 2 O, arising from the active reaction 2 between lattice O within Cu 2 O and intermediates of CH 3 O, CH 2 O, HCOO, and CO. Despite the more favorable O-H bond scission, C-O bond scission also occurs to result in surface accumulation of CH x on metallic Cu(100), blocking active sites for decomposition reactions of CH 3 OH and CH 3 O. By comparison, the CH x species on the Cu 2 O-covered Cu(100) undergo oxidation into CO 2 and H 2 O with lattice O in the Cu 2 O overlayer, thereby freeing active sites for the total oxidation of CH 3 OH. These results highlight the distinct roles of metallic Cu and Cu 2 O in the pathways of CH 3 OH decomposition and oxidation reactions, offering practical insights for the design of Cu-based catalysts with tailored reactivity and selectivity.
36 MATERIALS SCIENCE↗
Atomistic mechanisms of water vapor–induced surface passivation
The microscopic mechanisms underpinning the spontaneous surface passivation of metals from ubiquitous water have remained largely elusive. Here, using in situ environmental electron microscopy to atomically monitor the reaction dynamics between aluminum surfaces and water vapor, we provide direct experimental evidence that the surface passivation results in a bilayer oxide film consisting of a crystalline-like Al(OH) 3 top layer and an inner layer of amorphous Al 2 O 3 . The Al(OH) 3 layer maintains a constant thickness of ~5.0 Å, while the inner Al 2 O 3 layer grows at the Al 2 O 3 /Al interface to a limiting thickness. On the basis of experimental data and atomistic modeling, we show the tunability of the dissociation pathways of H 2 O molecules with the Al, Al 2 O 3 , and Al(OH) 3 surface terminations. The fundamental insights may have practical significance for the design of materials and reactions for two seemingly disparate but fundamentally related disciplines of surface passivation and catalytic H 2 production from water.
36 MATERIALS SCIENCE↗
Tuning the surface reactivity of oxides by peroxide species
The Mars–van Krevelen mechanism is the foundation for oxide-catalyzed oxidation reactions and relies on spatiotemporally separated redox steps. Herein, we demonstrate the tunability of this separation with peroxide species formed by excessively adsorbed oxygen, thereby modifying the catalytic activity and selectivity of the oxide. Using CuO as an example, we show that a surface layer of peroxide species acts as a promotor to significantly enhance CuO reducibility in favor of H 2 oxidation but conversely as an inhibitor to suppress CuO reduction against CO oxidation. Together with atomistic modeling, we identify that this opposite effect of the peroxide on the two oxidation reactions stems from its modification on coordinately unsaturated sites of the oxide surface. By differentiating the chemical functionality between lattice oxygen and peroxide, these results are closely relevant to a wide range of catalytic oxidation reactions using excessively adsorbed oxygen to activate lattice oxygen and tune the activity and selectivity of redox sites.
36 MATERIALS SCIENCE↗
Atomistic mechanisms of the initial oxidation of stepped Cu 3 Au ( 100 )
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Mo 2 TiC 2 MXene-Supported Ru Clusters for Efficient Photothermal Reverse Water–Gas Shift
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
In Situ Monitoring of H 2 -Induced Nonstoichiometry in Cu 2 O
Nonstoichiometry plays a pivotal role in the functioning of oxide materials, but it is challenging to measure the non-stoichiometric formation and the resulting charge redistribution around the point defects. Using ambient-pressure X-ray photoelectron spectroscopy and Auger electron spectroscopy to monitor the reduction of Cu 2 O in H 2 , we identify the formation of an intermediate, oxygen-deficient Cu 2 O phase and its progressive inward growth into the deeper region of the oxide. Complemented by DFT modeling, we show that the oxygen-deficient Cu 2 O formation occurs via molecular H 2 adsorption at the Cu 2 O surface, which results in the loss of lattice O from the formation of H 2 O molecules that desorb spontaneously from the oxide surface. The resulting oxy-gen-deficient Cu 2 O is a stable intermediate that persists before the Cu 2 O is fully reduced to metallic Cu. The O vacancy induced charge redistribution of the coordinating Cu atoms results in a satellite feature in Cu LMM, which can be used a fingerprint to identify the nonstoichiometry and local charge transfer in non-stoichiometric oxides.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of surface segregation on the oxidation resistance of Cu 3 Pt ( 100 )
Alloying element segregation often occurs under a reactive environment but its interplay with the subsequent surface oxidation of the alloy remains unclear. Using synchrotron-based ambient-pressure x-ray photoelectron spectroscopy, we dynamically monitor the surface segregation in Cu 3 Pt(100) in response to temperature and oxygen gas. Vacuum annealing leads to surface segregation of Cu along with the enrichment of Pt in the subsurface region. Upon switching to the O 2 atmosphere, dissociative chemisorption of oxygen does not change the surface segregation profile from that under the vacuum annealing condition. A stepwise increase in the oxygen pressure results in the transformation pathway of Cu → Cu 2 O → CuO, in which the selective oxidation of Cu gives rise to further accumulation of Pt underneath the oxide/alloy interface that hinders the supply of Cu from the bulk to the oxide/alloy interface, thereby leading to the termination of the surface oxidation after the Cu 2 O → CuO conversion is completed. This differs from the transformation pathway of Cu → Cu 2 O → Cu 2 O/CuO for the oxidation of pure Cu and Cu-Au alloys, in which the oxidation of Cu continues and the Cu 2 O/CuO bilayer growth is constantly maintained. Furthermore, these key differences provide useful insight into alloy design for controlling the surface properties such as corrosion resistance and catalytic performance of Cu base alloys.
36 MATERIALS SCIENCE↗
Scattering-type scanning near-field optical microscopy with Akiyama piezo-probes
Recent developments of the scattering-type scanning near-field optical microscope at cryogenic temperatures (cryogenic s-SNOM or cryo-SNOM) have led to many breakthroughs in the studies of low energy excitations in quantum materials. However, the simultaneous demands on vibration isolation, low base temperature, precise nano-positioning, and optical access make the construction of a cryo-SNOM a daunting task. Adding to the overhead space required for a cryo-SNOM is the atomic force microscopy control, which predominantly utilizes a laser-based detection scheme for determining the cantilever tapping motion. In this work, we provide an alternative and straightforward route to performing s-SNOM using metal-coated Akiyama probes, where the cantilever tapping motion is detected through a piezoelectric signal. We show that the Akiyama-based cryo-SNOM attains high spatial resolution, good near-field contrast, and is able to perform imaging with a significantly more compact system compared to other cryo-SNOM implementations. Our results firmly establish the potential of s-SNOM based on self-sensing piezo-probes, which can easily accommodate far-infrared wavelengths and high magnetic fields in the future.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Coupling between bulk thermal defects and surface segregation dynamics
Surface segregation is a phenomenon that depends on the delicate interplay between thermodynamic driving forces and kinetic obstacles, for which elevated temperature is often needed to enhance the atom mobility and reach equilibrium. Using the classic system of Cu 3 Au ( 100 ) under nonisothermal conditions, in this study, we show an adatom process underlying transient surface segregation dynamics through the temperature-change-driven creation and annihilation of thermal vacancies in the bulk and the resulting bulk-surface mass exchanges. This is demonstrated by monitoring the surface composition evolution of Cu 3 Au ( 100 ) with temperature changes between 250 and 500 ° C , showing that the increase in temperature decreases monotonically the surface Au concentration as a result of the transfer of more Cu than Au from the bulk to the surface to form Cu-rich clusters of adatoms. Such a bulk thermal defect effect is expected to be universal in inducing the disparity in the bulk-surface mass exchanges of dissimilar atoms in multicomponent materials because of the inherent differences in the vacancy formation energies of the constituent atoms.
36 MATERIALS SCIENCE↗