Microstructural evolution and load transfer in a nickel-based alloy: An in situ high-energy X-ray diffraction study
Abstract not provided
Engineering topics
Publications and source records attributed to Li, Cheng.
Abstract not provided
Not Available
A possible approach to enhance the performance of microbial electrochemical system such as microbial fuel cells is to increase the conductivity of catalytic biofilms and thereby the direct extracellular electron transfer within the biofilms and from the electrode. In the present study, we evaluated the impact of static low-intensity magnetic field on the anodic biofilms in microbial fuel cells (MFCs). Here, results demonstrated that the application of a low-intensity magnetic field (105 and 150 mT) can significantly shorten the startup time and enhance the overall performance of single-chamber MFCs in terms of current density (300%) and power density (150%). In situ conductance evaluation indicated that short-term application of magnetic field can increase biofilm conductivity, although the long-term enhancements were likely results of increased conductivity of the anodic biofilms associated with enriched population of Geobacteraceae. The peak-manner response of conductivity over gate potentials and the positive response of mature biofilm conductance to low intensity of magnetic field support the redox conduction model of the conductive exoelectrogenic biofilms.
Not Available
Not Available
We describe the sample design for the SDSS-IV MaNGA survey and present the final properties of the main samples along with important considerations for using these samples for science. Our target selection criteria were developed while simultaneously optimizing the size distribution of the MaNGA integral field units (IFUs), the IFU allocation strategy, and the target density to produce a survey defined in terms of maximizing signal-to-noise ratio, spatial resolution, and sample size. Our selection strategy makes use of redshift limits that only depend on i-band absolute magnitude (M {sub i}), or, for a small subset of our sample, M {sub i} and color (NUV − i). Such a strategy ensures that all galaxies span the same range in angular size irrespective of luminosity and are therefore covered evenly by the adopted range of IFU sizes. We define three samples: the Primary and Secondary samples are selected to have a flat number density with respect to M {sub i} and are targeted to have spectroscopic coverage to 1.5 and 2.5 effective radii (R {sub e}), respectively. The Color-Enhanced supplement increases the number of galaxies in the low-density regions of color–magnitude space by extending the redshift limits of the Primary sample in the appropriate color bins. The samples cover the stellar mass range 5×10{sup 8}⩽M{sub ∗}⩽3×10{sup 11} M{sub ⊙} h{sup −2} and are sampled at median physical resolutions of 1.37 and 2.5 kpc for the Primary and Secondary samples, respectively. We provide weights that will statistically correct for our luminosity and color-dependent selection function and IFU allocation strategy, thus correcting the observed sample to a volume-limited sample.
We study the dependence of galaxy clustering on H i mass using ∼16,000 galaxies with redshift in the range of 0.0025 10{sup 8} M{sub ⊙}, drawn from the 70% complete sample of the Arecibo Legacy Fast ALFA survey. We construct subsamples of galaxies with M{sub HI} above different thresholds and make volume-limited clustering measurements in terms of three statistics: the projected two-point correlation function, the projected cross-correlation function with respect to a reference sample, and the redshift-space monopole moment. In contrast to previous studies, which found no/weak H i mass dependence, we find both the clustering amplitudes on scales above a few megaparsecs and the bias factors to increase significantly with increasing H i mass for M{sub HI}>10{sup 9} M{sub ⊙}. For H i mass thresholds below ∼10{sup 9} M{sub ⊙}, the inferred galaxy bias factors are systematically lower than the minimum halo bias from mass-selected halo samples. We extend the simple halo model, in which the galaxy content is only determined by halo mass, by including the halo formation time as an additional parameter. A model that puts H i-rich galaxies into halos that formed late can reproduce the clustering measurements reasonably well. We present the implications of our best-fitting model on the correlation of H i mass with halo mass and formation time, as well as the halo occupation distributions and H i mass functions for central and satellite galaxies. These results are compared with the predictions from semianalytic galaxy formation models and hydrodynamic galaxy formation simulations.
In this paper, we report the peculiar H i morphology of the cluster spiral galaxy NGC 6145, which has a 150 kpc H i filament on one side that is nearly parallel to its major axis. This filament is made up of several H i clouds and the diffuse H i gas between them, with no optical counterparts. We compare its H i distribution with other one-sided H i distributions in the literature and find that the overall H i distribution is very different from the typical tidal and ram-pressure stripped H i shape, and that its morphology is inconsistent with that of a pure accretion event. Only ∼30% of the total H i gas is anchored on the stellar disk, while most of the H i gas forms the filament in the west. At a projected distance of 122 kpc, we find a massive elliptical companion (NGC 6146) with extended radio emission whose axis points to an H i gap in NGC 6145. The velocity of the H i filament shows an overall line-of-sight motion of 80–180 km s{sup −1} with respect to NGC 6145. Using the long-slit spectra of NGC 6145 along its major stellar axis, we find that some outer regions show enhanced star formation, while in contrast, almost no star formation activities are found in its center (<2 kpc). Pure accretion, tidal, or ram-pressure stripping are not likely to produce the observed H i filament. An alternative explanation is the jet stripping from NGC 6146, although direct evidence for a jet-cold gas interaction has not been found.
Ternary blend is proved to be a potential contender for achieving high efficiency in organic photovoltaics, which can apparently strengthen the absorption of active layer so as to better harvest light irradiation. Much of the previous work in ternary polymer solar cells focuses on broadening the absorption spectrum; however, a new insight is brought to study the third component, which in tiny amounts influents the small‐molecule acceptor‐based device performance. Without contributing to complementing the absorption, a minute amount of fullerene derivative, Bis‐PC 70 BM, can effectively play an impressive role as sensitizer in enhancing the external quantum efficiency of the host binary blend, especially for polymeric donor. Detailed investigations reveal that the minute addition of Bis‐PC 70 BM can realize morphology modification as well as facilitate electron transfer from polymeric donor to small molecule acceptor via cascade energy level modulation, and therefore lead to an improvement in device efficiency.
Searching for the neutrinoless double beta decay (NLDBD) is now regarded as the topmost promising technique to explore the nature of neutrinos after the discovery of neutrino masses in oscillation experiments. PandaX-III (particle and astrophysical xenon experiment III) will search for the NLDBD of 136 Xe at the China Jin Ping Underground Laboratory (CJPL). In the first phase of the experiment, a high pressure gas Time Projection Chamber (TPC) will contain 200 kg, 90% 136 Xe enriched gas operated at 10 bar. Fine pitch micro-pattern gas detector (Microbulk Micromegas) will be used at both ends of the TPC for the charge readout with a cathode in the middle. Charge signals can be used to reconstruct the electron tracks of the NLDBD events and provide good energy and spatial resolution. The detector will be immersed in a large water tank to ensure ∼5 m of water shielding in all directions. Furthermore, the second phase, a ton-scale experiment, will consist of five TPCs in the same water tank, with improved energy resolution and better control over backgrounds.
We investigate the recent star formation history (SFH) in the inner region of 57 nearly face-on spiral galaxies selected from the Calar Alto Legacy Integral Field Area (CALIFA) survey. For each galaxy, we use the integral field spectroscopy from CALIFA to obtain two-dimensional maps and radial profiles of three parameters that are sensitive indicators of the recent SFH: the 4000 Å break (D {sub n}(4000)), and the equivalent width of Hδ absorption (EW(Hδ{sub A})) and Hα emission (EW(Hα)). We have also performed photometric decomposition of bulge/bar/disk components based on SDSS optical image. We identify a class of 17 “turnover” galaxies for which the central region presents a significant drop in D {sub n}(4000), and most of them correspondingly show a central upturn in EW(Hδ{sub A}) and EW(Hα). This indicates that the central region of the turnover galaxies has experienced star formation in the past 1–2 Gyr, which makes the bulge younger and more star-forming than surrounding regions. We find that almost all (15/17) of the turnover galaxies are barred, while only half of the barred galaxies in our sample (15/32) are classified as a turnover galaxies. This finding provides strong evidence in support of the theoretical expectation that the bar may drive gas from the disk inward to trigger star formation in the galaxy center, an important channel for the growth/rejuvenation of pseudobulges in disk galaxies.
China's Design Standard for Energy Efficiency of Public Buildings (the Design Standard) is widely used in the design phase to regulate the energy efficiency of physical assets (envelope, lighting, HVAC) in buildings. However, the standard does not consider many important factors that influence the actual energy use in buildings, and this can lead to gaps between the design estimates and actual energy consumption. To achieve the national energy savings targets defined in the strategic 12th Five-Year Plan, China developed the first standard for energy consumption of buildings GB/T51161-2016 (the Consumption Standard). This study provides an overview of the Consumption Standard, identifies its strengths and weaknesses, and recommends future improvements. The analysis and discussion of the constraint value and the leading value, two key indicators of the energy use intensity, provide insight into the intent and effectiveness of the Consumption Standard. The results indicated that consistency between China's Design Standard GB 50189-2015 and the Consumption Standard GB/T51161-2016 could be achieved if the Design Standard used the actual building operations and occupant behavior in calculating the energy use in Chinese buildings. The development of an outcome-based code in the U.S. was discussed in comparison with China's Consumption Standard, and this revealed the strengths and challenges associated with implementing a new compliance method based on actual energy use in buildings in the U.S. Overall, this study provides important insights into the latest developments of actual consumption-based building energy standards, and this information should be valuable to building designers and energy policy makers in China and the U.S.
We present and analyze the possibility of using optical u- band luminosities to estimate star-formation rates (SFRs) of galaxies based on the data from the South Galactic Cap u band Sky Survey (SCUSS), which provides a deep u -band photometric survey covering about 5000 deg{sup 2} of the South Galactic Cap. Based on two samples of normal star-forming galaxies selected by the BPT diagram, we explore the correlations between u -band, H α , and IR luminosities by combing SCUSS data with the Sloan Digital Sky Survey and Wide-field Infrared Survey Explorer ( WISE ). The attenuation-corrected u -band luminosities are tightly correlated with the Balmer decrement-corrected H α luminosities with an rms scatter of ∼0.17 dex. The IR-corrected u luminosities are derived based on the correlations between the attenuation of u- band luminosities and WISE 12 (or 22) μ m luminosities, and then calibrated with the Balmer-corrected H α luminosities. The systematic residuals of these calibrations are tested against the physical properties over the ranges covered by our sample objects. We find that the best-fitting nonlinear relations are better than the linear ones and recommended to be applied in the measurement of SFRs. The systematic deviations mainly come from the pollution of old stellar population and the effect of dust extinction; therefore, a more detailed analysis is needed in future work.
Here, in order to solve the reactive power optimization with joint transmission and distribution networks, a hierarchical modeling method is proposed in this paper. It allows the reactive power optimization of transmission and distribution networks to be performed separately, leading to a master–slave structure and improves traditional centralized modeling methods by alleviating the big data problem in a control center. Specifically, the transmission-distribution-network coordination issue of the hierarchical modeling method is investigated. First, a curve-fitting approach is developed to provide a cost function of the slave model for the master model, which reflects the impacts of each slave model. Second, the transmission and distribution networks are decoupled at feeder buses, and all the distribution networks are coordinated by the master reactive power optimization model to achieve the global optimality. Finally, numerical results on two test systems verify the effectiveness of the proposed hierarchical modeling and curve-fitting methods.
Not provided.