Engineering topics

Li, Chien-Peng

Publications and source records attributed to Li, Chien-Peng.

3 records

NASA NTRS1991

Computational methods for shock waves in three-dimensional supersonic flow

A central artificial-viscosity and an upwind-biased difference method are contrived to solve the Euler equations for flowfields over typical spacecrafts. The spatial discretization is based on either nodal or cell-vertex formulation in the domain extending from free stream to the end of the vehicle. The outer boundary is treated as a bow shock in the first method but is placed in the free stream in the second, which captures both bow and internal shocks using an approximate Riemann solver based on high-order extrapolation to the cell face. These methods were tested for the Shuttle and Hermes orbiters at wind-tunnel conditions and angles of attack ranging from 0 to 60 deg. The artificial-viscosity method incorporated with a shock-fitting procedure shows smeared crossflow and wing-shock positions and required 15 percent more CPU per node than the upwind method. Greater flexibility and robustness is demonstrated by the latter on a fixed grid for all cases considered.

Li, Chien-Peng↗

NASA NTRS1989

Computation of hypersonic flow fields

The present discussion of the theory, solution methods, and development status of chemically reactive flow CFD codes pertaining to the flow field around a hypersonic vehicle encompasses the formulation of multicomponent viscous equations, grid-generation techniques, and finite-difference algorithms. The Navier-Stokes equations presented focus on such particularities of high speed vehicles as their aerodynamic configuration, lee and wake flow, bow shock, and chemistry and low density effects. Issues for which further development is desirable encompass boundary treatments, grid quality, shock capturing, and the decoupling of chemistry from flow variables.

Li, Chien-Peng↗

NASA NTRS1986

Euler solutions using an implicit multigrid technique

A coarse-grid correction algorithm has been implemented into an implicit upwind Euler solver and tested for transonic airfoil problems. The Euler solver uses split-flux formulation and penta-diagonal scalar equations, respectively, for the explicit and implicit operators. The multigrid sequence starts at the fine grid level, then steps down to each coarse grid level to smooth error components using implicit operators. Estimate of residuals can be obtained by two approaches, which differ in the level where the residuals are collected. Both approaches will lead to a work reduction factor of 12 for a Mach 0.75 flow at 2 degrees incidence on a 65x26 grid. The work reduction factor is found to increase proportional to the number of grid levels.

Li, Chien-Peng↗