Search NASA⌕ Search

Engineering topics

Li, D

Publications and source records attributed to Li, D.

78 records · Page 5

RF Breakdown Studies Using a 1.3 GHZ Test Cell

Many present and future particle accelerators are limited by the maximum electric gradient and peak surface fields that can be realized in RF cavities. Despite considerable effort, a comprehensive theory of RF breakdown has not been achieved and mitigation techniques to improve practical maximum accelerating gradients have had only limited success. Recent studies have shown that high gradients can be achieved quickly in 805 MHz RF cavities pressurized with dense hydrogen gas without the need for long conditioning times, because the dense gas can dramatically reduce dark currents and multipacting. In this project we use this high pressure technique to suppress effects of residual vacuum and geometry found in evacuated cavities to isolate and study the role of the metallic surfaces in RF cavity breakdown as a function of magnetic field, frequency, and surface preparation. A 1.3-GHz RF test cell with replaceable electrodes (e.g. Mo, Cu, Be, W, and Nb) and pressure barrier capable of operating both at high pressure and in vacuum has been designed and built, and preliminary testing has been completed. A series of detailed experiments is planned at the Argonne Wakefield Accelerator. At the same time, computer simulations of the RF Breakdown process will be carried out to help develop a consistent physics model of RF Breakdown. In order to study the effect of the radiofrequency on RF Breakdown, a second test cell will be designed, fabricated, and tested at a lower frequency, most likely 402.5 MHz.

43 PARTICLE ACCELERATORS↗

PREPARATIONS FOR ASSEMBLY OF THE INTERNATIONAL ERL CRYOMODULE AT DARESBURY LABORATORY

The collaborative development of an optimised cavity/cryomodule solution for application on ERL facilities has now progressed to final assembly and testing of the cavity string components and their subsequent cryomodule integration. This paper outlines the verification of the various cryomodule sub-components and details the processes utilised forfinal cavity string integration. The paper also describes the modifications needed to facilitate this new cryomodule installation and ultimate operation on the ALICE facility at Daresbury Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Positron generation through laser Compton scattering gamma ray

The positron source is developed through a high brightness gamma-ray beam, which is produced from a laser light scattering off a high-energy electron beam circulating in a storage ring. A thin Pb target is irradiated by the gamma ray to generate positrons via pair creation. By using imaging plate, we measured the generation rate and worked out the energy spectrum of generated positrons and electrons. The experimental results are close to that from Monte Carlo simulation. About 3618 positrons/s at several MeV can be generated by the present experimental setup, and this value can be improved by optimizing experimental conditions.

36 MATERIALS SCIENCE↗

Reducibility study of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}A{sub y}O{sub 9-{delta}} (A = W, Al, Ga) assessed by impedance spectroscopy

The reducibility of oxide-ion conductors La{sub 2-x}Ba{sub x}Mo{sub 2-y}W{sub y}O{sub 9-{delta}} (x = 0, 0.06; y = 0, 0.1, 0.5, 1.0) and La{sub 2}Mo{sub 1.9}A{sub 0.1}O{sub 9-{delta}} (A = Al, Ga) were studied in the reducing atmosphere of 5%H{sub 2} + Ar by means of impedance spectroscopy measurement. The introduction of Ba at La site in La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} can lower the sintering temperature by about 100 K in comparison with the La{sub 2}Mo{sub 2-y}W{sub y}O{sub 9} samples. All substitutions can enhance the conductivity and improve the reducibility in the temperature range from 548 to 923 K. The double substitution of Ba and W as well as substitution of Al or Ga at Mo sites has a better stabilizing effect than the single tungsten substitution. Among these substitutions the introduction of Al has the best stabilizing effect.

36 MATERIALS SCIENCE↗

Cryoelectron Microscopy Structure of Purified gamma-Secretase at 12 angstrom Resolution

{gamma}-Secretase, an integral membrane protein complex, catalyzes the intramembrane cleavage of the {beta}-amyloid precursor protein (APP) during the neuronal production of the amyloid {beta}-peptide. As such, the protease has emerged as a key target for developing agents to treat and prevent Alzheimer's disease. Existing biochemical studies conflict on the oligomeric assembly state of the protease complex, and its detailed structure is not known. Here, we report that purified active human {gamma}-secretase in digitonin has a total molecular mass of {approx} 230 kDa when measured by scanning transmission electron microscopy. This result supports a complex that is monomeric for each of the four component proteins. We further report the three-dimensional structure of the {gamma}-secretase complex at 12 {angstrom} resolution as obtained by cryoelectron microscopy and single-particle image reconstruction. The structure reveals several domains on the extracellular side, three solvent-accessible low-density cavities, and a potential substrate-binding surface groove in the transmembrane region of the complex.

59 BASIC BIOLOGICAL SCIENCES↗

Pressure-induced Amorphization and Polyamorphism in One-Dimensional Single Crystal TiO2 Nanomaterials

The structural phase transitions of single-crystal TiO{sub 2}-B nanoribbons were investigated in situ at high pressure using synchrotron X-ray diffraction and Raman scattering. Our results have shown a pressure-induced amorphization (PIA) occurred in TiO{sub 2}-B nanoribbons upon compression, resulting in a high-density amorphous (HDA) form related to the baddeleyite structure. Upon decompression, the HDA form transforms to a low-density amorphous (LDA) form, while the samples still maintain their pristine nanoribbon shape. A high-resolution transmission electron microscopy (HRTEM) image reveals that the LDA phase has an {alpha}-PbO{sub 2} structure with short-range order. We propose a homogeneous nucleation mechanism to explain the pressure-induced amorphous phase transition in the TiO{sub 2}-B nanoribbons. Our study demonstrates for the first time that PIA and polyamorphism occurred in the one-dimensional (1D) TiO{sub 2} nanomaterials and provides a new method for preparing 1D amorphous nanomaterials from crystalline nanomaterials.

58 GEOSCIENCES↗