Search NASA⌕ Search

Engineering topics

Li, Feng

Publications and source records attributed to Li, Feng.

At least 37 records · Page 2

The connectome of the adult Drosophila mushroom body provides insights into function

Making inferences about the computations performed by neuronal circuits from synapse-level connectivity maps is an emerging opportunity in neuroscience. The mushroom body (MB) is well positioned for developing and testing such an approach due to its conserved neuronal architecture, recently completed dense connectome, and extensive prior experimental studies of its roles in learning, memory, and activity regulation. Here, we identify new components of the MB circuit in Drosophila , including extensive visual input and MB output neurons (MBONs) with direct connections to descending neurons. We find unexpected structure in sensory inputs, in the transfer of information about different sensory modalities to MBONs, and in the modulation of that transfer by dopaminergic neurons (DANs). We provide insights into the circuitry used to integrate MB outputs, connectivity between the MB and the central complex and inputs to DANs, including feedback from MBONs. Our results provide a foundation for further theoretical and experimental work.

Li, Feng↗

The Third Data Release of the Beijing–Arizona Sky Survey

The Beijing–Arizona Sky Survey (BASS) is a wide and deep imaging survey that covers a 5400 deg 2 area in the northern Galactic cap with the 2.3 m Bok telescope using two filters ( g and r bands). The Mosaic z -band Legacy Survey (MzLS) covers the same area in the z band with the 4 m Mayall telescope. These two surveys will be used for spectroscopic targeting by the Dark Energy Spectroscopic Instrument (DESI) in the northernmost portion of the DESI footprint. This paper describes the third data release (DR3) of BASS, which contains the photometric data from all BASS and MzLS observations from 2015 January until the completion of BASS in 2019 March. The median astrometric precision relative to Gaia positions is about 17 mas and the median photometric offset relative to the Pan-STARRS1 photometry is within 5 mmag. The median 5 σ AB magnitude depths for point sources are 24.2, 23.6, and 23.0 mag for the g , r , and z bands, respectively. The photometric depth within the survey area is highly homogeneous, and the difference between the 20% and 80% depth is less than 0.3 mag. The DR3 data, including raw data, calibrated single-epoch images, single-epoch photometric catalogs, stacked images, and co-added photometric catalogs, are publicly accessible at http://batc.bao.ac.cn/BASS/doku.php?id=datarelease:home

79 ASTRONOMY AND ASTROPHYSICS↗

Corrosion Behavior of AZ31 Magnesium Alloy Produced by Continuous Variable Cross Section Direct Extrusion

In order to study the corrosion behavior of magnesium alloys of high performance in the simulated seawater by continuous variable cross section direct extrusion (CVCDE), an electrochemical method and weight loss method were used to study the difference between AZ31 magnesium alloys produced by CVCDE with different numbers of interim dies to examine the electrochemical corrosion behavior and corrosion rate at 3.5 wt.% NaCl solution in this paper. Scanning electron microscopy and x-ray diffraction were used to analyze the morphology of corrosion surfaces and the composition of the corrosion products of samples soaked for different times. The results show that after CVCDE with different numbers of interim dies, the size of the microstructure is refined gradually, and the grain orientation is also different; with the increase in the number of interim dies, the thermodynamic corrosion tendencies are different, and the corrosion resistance of samples extruded by conventional extrusion is relatively good; the charge transfer and material transfer process are the two main factors affecting the corrosion rate, which determines the direction of the electrochemical reaction; the corrosion form of the sample extruded by CVCDE is the local corrosion which is the filiform corrosion and pitting corrosion, and the corrosion product is mainly water-insoluble Mg(OH){sub 2}.

36 MATERIALS SCIENCE↗

MetaBAT 2: an adaptive binning algorithm for robust and efficient genome reconstruction from metagenome assemblies

We previously reported on MetaBAT, an automated metagenome binning software tool to reconstruct single genomes from microbial communities for subsequent analyses of uncultivated microbial species. MetaBAT has become one of the most popular binning tools largely due to its computational efficiency and ease of use, especially in binning experiments with a large number of samples and a large assembly. MetaBAT requires users to choose parameters to fine-tune its sensitivity and specificity. If those parameters are not chosen properly, binning accuracy can suffer, especially on assemblies of poor quality. Here, we developed MetaBAT 2 to overcome this problem. MetaBAT 2 uses a new adaptive binning algorithm to eliminate manual parameter tuning. We also performed extensive software engineering optimization to increase both computational and memory efficiency. Comparing MetaBAT 2 to alternative software tools on over 100 real world metagenome assemblies shows superior accuracy and computing speed. Binning a typical metagenome assembly takes only a few minutes on a single commodity workstation. We therefore recommend the community adopts MetaBAT 2 for their metagenome binning experiments. MetaBAT 2 is open source software and available at https://bitbucket.org/berkeleylab/metabat .

59 BASIC BIOLOGICAL SCIENCES↗

Dynamic Recrystallization and Metal Flow Behavior of AZ31 Magnesium Alloy Bending Products Processed by Staggered Extrusion

Traditional curved products are obtained in two steps, which consist of an extrusion process and a bending process. There are many bottlenecks to this, such as long processing cycle, low efficiency, and difficulty in controlling the product quality. In this paper, a new staggered extrusion (SE) process was proposed to obtain magnesium alloy bending products. Bending products can be extruded by a staggered punch which has a step-like structure at one end. The experimental results show that with increased staggered distance (h) of the punch, the bending height of the bending products increased significantly. Compared with traditional extrusion, the grains of the bending products obtained by SE are refined. The increase in h is one of the reasons for the asymmetric distribution of axial velocity at the die exit of AZ31 magnesium alloy bending products. The asymmetric distribution of the flow velocity field of bending products during SE is one of the contributors for the bending characteristics to the bending products. The SE enables the use of extrusion in many applicable fields and enriches the types of bending products.

36 MATERIALS SCIENCE↗

Recent Antarctic Sea Ice Extent Variability and Its Relation to Atmospheric Circulation in Reanalyses and Seasonal Forecasts

Sea ice is considered an important indicator of climate change. Interest has focused on the trend towards reduced sea ice cover in the Arctic Ocean, particularly during summer months. In the Southern Hemisphere, sea ice has also received attention due to a trend towards increasing cover, in opposition to the Northern Hemisphere and to climate model projections. This all changed in the austral spring 2016, when the Southern Ocean sea ice cover dropped dramatically, and has remained consistently at below average values up to the present. Here I review some of the issues and perceived causes of the 2016 sea ice reduction. Several studies have suggested a change in surface winds, which would allow warmer waters to move upwards in the water column and towards the surface. Results from the GMAO (Global Modeling and Assimilation Office) ocean data assimilation system are consistent with this hypothesis, and indicate a significant warming of subsurface waters occurred in the winter of 2016, and has remained in place.

Polar↗

Exploring reaction dynamics in lithium–sulfur batteries by time-resolved operando sulfur K-edge X-ray absorption spectroscopy

A time-resolved operando X-ray absorption spectroscopy experiment was successfully designed to explore the sulfur reaction dynamics in lithium–sulfur (Li–S) batteries. It presents direct real-time experimental evidence for the distinct sulfur dynamics at different discharge rates, deepening the understanding of reaction mechanisms in Li–S batteries.

25 ENERGY STORAGE↗

MetaBAT 2: an adaptive binning algorithm for robust and efficient genome reconstruction from metagenome assemblies

We previously reported MetaBAT, an automated metagenome binning software tool to reconstruct single genomes from microbial communities for subsequent analyses of uncultivated microbial species. MetaBAT has become one of the most popular binning tools largely due to its computational efficiency and ease of use, especially in binning experiments with a large number of samples and a large assembly. MetaBAT requires users to choose parameters to fine-tune its sensitivity and specificity. If those parameters are not chosen properly, binning accuracy can suffer, especially on assemblies of poor quality. Here we developed MetaBAT 2 to overcome this problem. MetaBAT 2 uses a new adaptive binning algorithm to eliminate manual parameter tuning. We also performed extensive software engineering optimization to increase both computational and memory efficiency. Comparing MetaBAT 2 to alternative software tools on over 100 real world metagenome assemblies shows superior accuracy and computing speed. Binning a typical metagenome assembly takes only a few minutes on a single commodity workstation. We therefore recommend the community adopts MetaBAT 2 for their metagenome binning experiments. MetaBAT 2 is open source software and available at https://bitbucket.org/berkeleylab/metabat .

Kang, Dongwan↗

Microstructural Analysis and Texture Evolution of the CVCEDed AZ31 Magnesium Alloy by Hot Rolling

Grain refinement is one of the important methods to improve the performance of magnesium alloy sheets. This paper attempts to prepare the billets of AZ31 magnesium alloy sheets by continuous variable cross-section direct extrusion (CVCDE) and then prepare sheets by rolling. The results show that the average grain size of the sheets rolled from extruded products by CVCDE with 2 interim dies reduced by 30% and the tensile strength increased by 12.6% compared with the sheets rolled from extruded products by traditional extrusion (CE), which is related to the dislocation multiplication in the corresponding conditions. The high dislocation density hinders the plastic deformation of the material, which is one of the internal factors that cause the increase in the strength of the material and the decrease in the plasticity. In addition, the basal surface of a lot of grains of the sheets rolled from extruded products by CVCDE with 2 interim dies is parallel to the RD-TD plane and the strength of texture is high. Meanwhile, the value of average Schmid factor of the sheets rolled from extruded products by CVCDE with 2 interim dies along the rolling direction is lowest, which result in lower plasticity. The above research provides a new idea for the development of high-performance magnesium alloy sheets.

36 MATERIALS SCIENCE↗

The Second Data Release of the Beijing–Arizona Sky Survey

This paper describes the second data release (DR2) of the Beijing-Arizona Sky Survey (BASS). BASS is an imaging survey covering a 5400 deg 2 footprint in the g and r bands using the 2.3 m Bok telescope. DR2 includes the observations through 2017 July obtained by BASS and by the Mayall z-band Legacy Survey (MzLS), which used the 4 m Mayall telescope to observe the same footprint. BASS and MzLS have completed 72% and 76% of their observations. The two surveys will be served for the spectroscopic targeting of the upcoming Dark Energy Spectroscopic Instrument. Both BASS and MzLS data are reduced by the same pipeline. We have updated the basic data reduction and photometric calibrations in DR2. In particular, source detections are performed on stacked images, and photometric measurements are co-added from single-epoch images based on these sources. The median 5σ point-source depths after Galactic extinction corrections are 24.05, 23.61, and 23.10 mag for the g, r, and z bands, respectively. The DR2 data products include stacked images, co-added catalogs, and single-epoch images and catalogs. The BASS website (http://batc.bao.ac.cn/BASS/) provides detailed information and links to download the data.

79 ASTRONOMY AND ASTROPHYSICS↗

Synthesis of δ-Bi2O3/Bi2MoO6 composites with enhanced photocatalytic activity by hydrothermal method

Highlights: • The δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} composites were first synthesized by hydrothermal method. • The product was δ-Bi{sub 2}O{sub 3} rather than α-Bi{sub 2}O{sub 3} with the preset of Bi{sub 2}MoO{sub 6}. • The composites show enhanced photocatalytic activity compared to Bi{sub 2}MoO{sub 6}, α- and δ-Bi{sub 2}O{sub 3}. • The excellent photocatalytic performance was attributed to δ- Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} heterojunctions. - Abstract: The δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} composites were synthesized by hydrothermal method and the microstructure and photocatalytic property were characterized. The X-ray diffraction (XRD) analysis revealed that δ-Bi{sub 2}O{sub 3} was obtained with the existence of Bi{sub 2}MoO{sub 6}, while the product was α-Bi{sub 2}O{sub 3} without Bi{sub 2}MoO{sub 6} under the same experimental condition. The SEM images and the selected area electron diffraction (SAED) patterns have further verified that δ-Bi{sub 2}O{sub 3} was deposited on Bi{sub 2}MoO{sub 6}. The X-ray photoelectron spectroscopy (XPS) spectrum confirmed that the composites were composed of δ-Bi{sub 2}O{sub 3} and Bi{sub 2}MoO{sub 6}, while a fraction of Mo changed from Mo{sup 6+} to Mo{sup 5+}. The coexistence of Mo{sup 5+}/Mo{sup 6+} can be a critical factor in the formation of stable δ-Bi{sub 2}O{sub 3} on Bi{sub 2}MoO{sub 6}. Particularly, the δ-Bi{sub 2}O{sub 3}/Bi{sub 2}MoO{sub 6} photocatalysts possess favorable photocatalytic performance under simulated sunlight illumination since the recombination of photogenerated electrons and holes was inhibited due to the p-n junction at the interface of δ-Bi{sub 2}O{sub 3} and Bi{sub 2}MoO{sub 6}, and the mechanism was discussed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A new vaccine targeting RANKL, prepared by incorporation of an unnatural Amino acid into RANKL, prevents OVX-induced bone loss in mice

Highlights: • Prepared a novel vaccine targeting RANKL by incorporating a p-nitrophenylalanine into murine RANKL. • The antiserum induced by the vaccine could efficiently prevent osteoclastogenesis in vitro. • The vaccine could prevent OVX-induced bone loss in mice. Bone homeostasis is maintained by a dynamic balance between osteoblastic bone formation and osteoclastic bone resorption. The receptor activator of nuclear-κB ligand (RANKL) is essential for the function of the bone-resorbing osteoclasts, and targeting RANKL has been proved highly successful in osteoporosis patients. This study aimed to design a novel vaccine targeting RANKL and evaluate its therapeutic effects in OVX-induced bone loss model. Anti-RANKL vaccine was generated by incorporating the unnatural amino acid p-nitrophenylalanine (pNO{sub 2}Phe) into selected sites in the murine RANKL (mRANKL) molecule. Specifically, mutation of a single tyrosine residue Tyr{sup 234} (Y234) or Tyr{sup 240} (Y240) of mRANKL to pNO{sub 2}Phe (thereafter named as Y{sup 234}pNO{sub 2}Phe or Y{sup 240}pNO{sub 2}Phe) induced a high titer antibody response in mice, whereas no significant antibody response was observed for the wild type mRANKL (WT mRANKL). The antiserum induced by Y{sup 234}pNO{sub 2}Phe or Y{sup 240}pNO{sub 2}Phe could efficiently prevent osteoclastogenesis in vitro. Moreover, immunization with Y{sup 234}pNO{sub 2}Phe or Y{sup 240}pNO{sub 2}Phe could also prevent OVX-induced bone loss in mice, suggesting that selected pNO{sub 2}Phe-substituted mRANKL may pave the way for creating a novel vaccine to treat osteoporosis.

60 APPLIED LIFE SCIENCES↗

Growth behavior and orientation relationships in AISI 304 stainless steel during directional solidification

Highlights: • N–W orientation relationship between the lathy ferrite and austenite was determined. • {103} and <001> of ferrite are parallel to the sample surface and heat flow direction. • Lathy ferrite is elongated in [001], [011], and [123] directions during solidification. - Abstract: The formation mechanism of lathy ferrite in AISI 304 stainless steel during directional solidification was discussed in terms of the orientation relationship between ferrite and austenite. Experimental results show that most of the ferrite laths are arranged parallel and a few ferrite laths with perpendicular morphology can also be observed in the solidified microstructure. Selected-area diffraction patterns by transmission electron microscopy (TEM) and pole figures by electron backscatter diffraction (EBSD) show that Nishiyama–Wassermann orientation relationship between the lathy ferrite and austenite exists in the solidified microstructure. Based on the pole figures of the ferrite, it was found that (103) and [001] of the lathy ferrite are parallel to the sample surface and heat flow direction, respectively, during directional solidification. The elongated directions of the lathy ferrite are found to be [001], [011], and [123], which means that the lathy ferrite grows without preferential direction during directional solidification.

36 MATERIALS SCIENCE↗

Novel graphene quantum dots (GQDs)-incorporated thin film composite (TFC) membranes for forward osmosis (FO) desalination

This paper reports a novel class of thin film composite (TFC) membranes for forward osmosis (FO) desalination. The TFC membranes were fabricated via interfacial polymerization (IP) of aqueous mixture of polyethyleneimine (PEI) and graphene quantum dots (GQDs) with organic solution of trimesoyl chloride (TMC) on modified polyacrylonitrile (PAN) ultrafiltration substrates. The chemical structures and morphologies of the synthesized GQDs and the GQDs-incorporated membranes were studied by various characterization techniques. The synthesized GQDs exhibited a narrow size distribution of 1.0–4.0 nm with an average size of 2.19 nm, and the thickness were one to three graphene layers. The results showed that GQDs nanoparticles were covalently bonded to the polyamide chains. The optimized TFC membrane with 0.050 wt% GQDs loading exhibited quite hydrophilic and neutrally charged membrane surface, along with an enhanced water flux of 12.9 L m –2 h –1 and a comparable reverse salt flux of 1.41 g m –2 h –1 when DI water and 0.5 M MgCl2 were used as the feed solution and the draw solution, respectively. Also, the optimized GQDs-incorporated TFC membrane presented an especially good anti-fouling performance. Furthermore, incorporating the novel graphene nanomaterial into polymer membranes may present its great potential application in desalination, purification and wastewater treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗