Search NASA⌕ Search

Engineering topics

Li, Hong

Publications and source records attributed to Li, Hong.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Local Electronic Structure of Molecular Heterojunctions in a Single‐Layer 2D Covalent Organic Framework

Abstract The synthesis of a single‐layer covalent organic framework (COF) with spatially modulated internal potentials provides new opportunities for manipulating the electronic structure of molecularly defined materials. Here, the fabrication and electronic characterization of COF‐420: a single‐layer porphyrin‐based square‐lattice COF containing a periodic array of oriented, type II electronic heterojunctions is reported. In contrast to previous donor–acceptor COFs, COF‐420 is constructed from building blocks that yield identical cores upon reticulation, but that are bridged by electrically asymmetric linkers supporting oriented electronic dipoles. Scanning tunneling spectroscopy reveals staggered gap (type II) band alignment between adjacent molecular cores in COF‐420, in agreement with first‐principles calculations. Hirshfeld charge analysis indicates that dipole fields from oriented imine linkages within COF‐420 are the main cause of the staggered electronic structure in this square grid of atomically–precise heterojunctions.

Joshi, Trinity↗
DOE OSTI2018

Li-ion battery material under high pressure: amorphization and enhanced conductivity of Li 4 Ti 5 O 12

Lithium titanium oxide (Li 4 Ti 5 O 12 , LTO), a 'zero-strain' anode material for lithium-ion batteries, exhibits excellent cycling performance. However, its poor conductivity highly limits its applications. Here, the structural stability and conductivity of LTO were studied using in situ high-pressure measurements and first-principles calculations. LTO underwent a pressure-induced amorphization (PIA) at 26.9 GPa. The impedance spectroscopy revealed that the conductivity of LTO improved significantly after amorphization and that the conductivity of decompressed amorphous LTO increased by an order of magnitude compared with its starting phase. Furthermore, our calculations demonstrated that the different compressibility of the LiO 6 and TiO 6 octahedra in the structure was crucial for the PIA. The amorphous phase promotes Li + diffusion and enhances its ionic conductivity by providing defects for ion migration. Our results not only provide an insight into the pressure depended structural properties of a spinel-like material, but also facilitate exploration of the interplay between PIA and conductivity.

25 ENERGY STORAGE↗
DOE OSTI2018

The 2019 materials by design roadmap

Advances in renewable and sustainable energy technologies critically depend on our ability to design and realize materials with optimal properties. Materials discovery and design efforts ideally involve close coupling between materials prediction, synthesis and characterization. Increased use of computational tools, the generation of materials databases, and advances in experimental methods have substantially accelerated these activities. It is therefore an opportune time to consider future prospects for materials by design approaches. The purpose of this roadmap is to present an overview of the current state of computational materials prediction, synthesis and characterization approaches, materials design needs for various technologies, and future challenges and opportunities that must be addressed. Perspectives cover topics on computational techniques, validation, materials databases, materials informatics, high-throughput combinatorial methods, advanced characterization approaches, and materials design issues in thermoelectrics, photovoltaics, solid state lighting, catalysts, batteries, metal alloys, complex oxides and transparent conducting materials. It is our hope that this roadmap will guide researchers and funding agencies in identifying new prospects for materials design.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Temperature-Sensitive Structure Evolution of Lithium–Manganese-Rich Layered Oxides for Lithium-Ion Batteries

Cathodes of lithium-rich layered oxides for high-energy Li-ion batteries in electrically powered vehicles are attracting considerable attention by the research community. Furthermore, current research is insufficient to account for their complex reaction mechanism and application. Thus, the structural evolution of lithium-manganese-rich layered oxides at different temperatures during electrochemical cycling has been investigated thoroughly, and their structural stability has been designed. The results indicated structure conversion from the two structures into a core-shell structure with a single distorted-monoclinic LiTMO 2 structure core and disordered-spinel/rock salt structure shell, along with lattice oxygen extraction and lattice densification, transition- metal migration, and aggregation on the crystal surface. Here, the structural conversion behavior was found to be seriously temperature sensitive, accelerated with higher temperature, and can be effectively adjusted by structural design. This study clarifies the structural evolution mechanism of these lithium-rich layered oxides and opens the door to the design of similar high-energy materials with better cycle stability.

25 ENERGY STORAGE↗
DOE OSTI2018

Downregulation of Sfrp5 in insulin resistant rats promotes macrophage-mediated pulmonary inflammation through activation of Wnt5a/JNK1 signaling

Insulin resistance (IR), a common co-morbidity of chronic obstructive pulmonary disease (COPD), aggravates airway inflammation in COPD patients, but its mechanism is unclear. Sfrp5, a novel anti-inflammatory adipocytokine, inhibits macrophage-mediated inflammation of adipose tissue and abrogates IR. However, few studies have been conducted on the regulatory role of Sfrp5 in lung inflammation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Crank–Nicolson WSGI difference scheme with finite element method for multi-dimensional time-fractional wave problem

In this article, a second-order Crank–Nicolson weighted and shifted Grünwald integral (WSGI) time-discrete scheme combined with finite element method is studied for finding the numerical solution of the multi-dimensional time-fractional wave equation. The time-fractional wave equation with Caputo-fractional derivative is transformed into the time-fractional integral equation by integral technique, then the second-order Crank–Nicolson finite element scheme with a time second-order WSGI discrete approximation for fractional integral is formulated. The analysis of stability is made, then a priori error estimate is given by making use of the conversion technique between the WSGI formula and fractional integral. At the end of the article, some numerical examples covering two two-dimensional cases with rectangular element and triangular element and a three-dimensional case with tetrahedral element are shown to test and verify our theoretical results.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

High expression of fibroblast growth factor-21 in liposarcoma patients indicated better prognosis and less recurrence

Liposarcoma is the most common soft tissue malignancy. We investigated the relationship between the expression of fibroblast growth factor −21 protein and recurrence in the liposarcoma tissues from 40 patients. The patients were divided into two groups (low/no- and high-expressing) for further survival analysis according to fibroblast growth factor −21 expression in their tumor tissue. Immunohistochemical staining showed that fibroblast growth factor −21 protein was located in the cytoplasm. The fibroblast growth factor −21 protein was significantly less expressed in liposarcoma than in normal tissue (p < 0.05). Fibroblast growth factor −21 protein expression was related to gender, but not age, cell differentiation or tumor size. The patients in the low/no fibroblast growth factor 21 expression group were more likely to relapse and die in a shorter period of time. The patients in the high-expression group had a better prognosis and less recurrence. fibroblast growth factor −21 has the potential to act both as a biomarker for liposarcoma prognosis as well as a marker for the response to therapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Exogenous hydrogen sulfide protects from endothelial cell damage, platelet activation, and neutrophils extracellular traps formation in hyperhomocysteinemia rats

Highlights: • NaHS protects from ECs damage, platelet activation and NETs formation. • NaHS regulates platelets activation concern the phosphor-p38 MAPK pathway. • The inhibition of NaHS on platelets activation which prevents the NETs formation. Hydrogen sulfide (H{sub 2}S) prevents endothelial cells damage and P-selectin of platelets promotes neutrophils extracellular traps (NETs) formation. However, how sodium hydrosulfide (NaHS), a donor that produces H{sub 2}S regulates the activation of platelets and whether H{sub 2}S inhibits the formation of neutrophils extracellular traps in hyperhomocysteinemia rats have not been previously investigated. The morphological and ultrastructural alterations of endothelial cells (ECs) and platelets were tested by transmission electron microscopy. The expressions of P-selectin of platelets were determined by flow cytometry. Additionally, the cellular ROS and the H{sub 2}S level were detected by DCFH-DA staining and H{sub 2}S probe, the expressions of Bax and Bcl-2 in arteries and cultured ECs from rat thoracic aortas and the phosphor-p38 mitogen-activated protein kinase (MAPK), CSE and CBS of platelets were measured by western blotting. The NETs formations, the concentration of DNA in serum and supernatant of cultured neutrophils stimulated with platelet-rich plasma (PRP) were tested by Sytox Green and PicoGreen commercial Kits. The vascular ECs damaged, the expression of P-selectin of platelets and NETs formation increased; the concentration of DNA in serum and supernatant of cultured neutrophils stimulated with PRP also increased; the expression of Bax increased while Bcl-2 decreased in arteries, the phosphor-p38 MAPK of platelets increased while CSE and CBS have no statistically significant changes in the HHcy group compared to the control group. In the cultured ECs, the ROS level increased while the H{sub 2}S level decreased after 48 and 72 h treatment by HHcy; the expression of Bcl-2 decreased while Bax increased after 72 h treatment by HHcy. NaHS significantly inhibited the ECs injured, cellular ROS production, platelet activation and NETs formation, reversed the expressions of Bax, Bcl-2, phosphor-p38 MAPK, P-selectin and the increased concentration of DNA in serum and supernatant of cultured neutrophils which caused by high homocysteine. Our results demonstrate that the donor of H{sub 2}S inhibits the platelets activation and NETs formation, which concerts the protection of ECs in hyperhomocysteinemia.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Phase transformations in body-centered cubic NbxHfZrTi high-entropy alloys

Highlights: • BCC phase stability and phase transformations of NbxHfZrTi HEAs were investigated. • Three types of phase transformations: β → ω, β → α″ and β → α′ in HEAs were observed. • The athermal ω phase in Nb{sub 0.2}HfZrTi HEA leads to a much higher yield strength. • The reversible β → α″ in Nb{sub 0.4}HfZrTi HEA results in a narrow cyclic hysteresis loop. • A sluggish effect of martensitic transformations in complex HEAs is revealed. - Abstract: The stability of body-centered cubic (β) phases and phase transformations of NbxHfZrTi (x = 1, 0.6, 0.4 and 0.2) high-entropy alloys (HEAs) were investigated. Three types of transformations were observed: the β → ω transformation during cooling in Nb0.2 HEA, the deformation-induced β → α″ and β → α′ transformations in Nb0.4 and Nb0.2 HEAs, respectively. This implies that the phonon anomalies, T{sub 1}1/2(110) and L2/3(111), as the origins of phase transformations in simple Ti, Zr and Hf alloys, also exist in composition-complex TiZrHf-based HEAs. However, the very small fraction of deformation-induced α′/α″ martensite in fractured Nb0.4 and Nb0.2 suggests a sluggish effect of transformation as compared with simple β-Ti alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2018

MicroRNA-185 inhibits the growth and proliferation of osteoblasts in fracture healing by targeting PTH gene through down-regulating Wnt/β -catenin axis: In an animal experiment

Fracture healing is a repair process of a mechanical discontinuity loss of force transmission, and pathological mobility of bone. Increasing evidence suggests that microRNA (miRNA) could regulate chondrocyte, osteoblast, and osteoclast differentiation and function, indicating miRNA as key regulators of bone formation, resorption, remodeling, and repair. Hence, during this study, we established a right femur fracture mouse model to explore the effect microRNA-185 (miR-185) has on osteoblasts in mice during fracture healing and its underlying mechanism. After successfully model establishment, osteoblasts were extracted and treated with a series of mimics or inhibitors of miR-185, or siRNA against PTH. Quantitative reverse transcription polymerase chain reaction (qRT-PCR) and western blot analysis were performed to determine the levels of miR-185, PTH, β-catenin and Wnt5b. Cell viability, cycle distribution and apoptosis were detected by means of MTT and flow cytometry assays. Dual luciferase reporter gene assay verified that PTH is a target gene of miR-185. Osteoblasts transfected with miR-185 mimics or siRNA against PTH presented with decreased levels of PTH, β-catenin and Wnt5b which indicated that miR-185 blocks the Wnt/β -catenin axis by inhibiting PTH. Moreover, miR-185 inhibitors promoted the osteoblast viability and reduced apoptosis with more cells arrested at the G1 stage. MiR-185 mimics were observed to have inhibitory effects on osteoblasts as opposed to those induced by miR-185 inhibitors. Above key results indicated that suppression of miR-185 targeting PTH could promote osteoblast growth and proliferation in mice during fracture healing through activating Wnt/β -catenin axis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries

A passivation layer called the solid electrolyte interphase (SEI) is formed on electrode surfaces from decomposition products of electrolytes. The SEI allows Li + transport and blocks electrons in order to prevent further electrolyte decomposition and ensure continued electrochemical reactions. The formation and growth mechanism of the nanometer thick SEI films are yet to be completely understood owing to their complex structure and lack of reliable in situ experimental techniques. Significant advances in computational methods have made it possible to predictively model the fundamentals of SEI. This review aims to give an overview of state-of-the-art modeling progress in the investigation of SEI films on the anodes, ranging from electronic structure calculations to mesoscale modeling, covering the thermodynamics and kinetics of electrolyte reduction reactions, SEI formation, modification through electrolyte design, correlation of SEI properties with battery performance, and the artificial SEI design. Multi-scale simulations have been summarized and compared with each other as well as with experiments. Computational details of the fundamental properties of SEI, such as electron tunneling, Li-ion transport, chemical/mechanical stability of the bulk SEI and electrode/(SEI/) electrolyte interfaces have been discussed. This review shows the potential of computational approaches in the deconvolution of SEI properties and design of artificial SEI. We believe that computational modeling can be integrated with experiments to complement each other and lead to a better understanding of the complex SEI for the development of a highly efficient battery in the future.

25 ENERGY STORAGE↗
DOE OSTI2018

Advanced Characterization Techniques in Promoting Mechanism Understanding for Lithium-Sulfur Batteries

Due to the numerous advantages, such as high specific capacity, etc., lithium-sulfur batteries (Li-S batteries) have attracted much attention as next-generation energy storage systems. To meet future needs for commercial application, Li-S batteries will require both improved cycle life and high energy density. It is of critical importance to understand the fundamental mechanisms in Li-S system to further improve the whole battery performance. Various advanced characterization techniques, over the past few years, have proven their important role in promoting the mechanism understanding for Li-S batteries. Here, we review the recent progress of mechanism understanding, including redox reactions, Li polysulfides dissolution, and etc., in Li-S systems based on the advanced characterization techniques. Special focus is placed on how these advanced characterization techniques are being employed and what characteristic or capability they possess. The necessity of combination of multiple characterization, difference between ex situ and in situ experimental methods, as well as importance of characterization conditions in Li-S batteries are also discussed.

Zhao, Enyue↗
DOE OSTI2018

Perspectives of automotive battery R&D in China, Germany, Japan, and the USA

Lithium(-ion) batteries are and will be the battery technology of choice for a wide range of applications - including electric vehicles - for several years to come. Nonetheless, to foster the transition from combustion engine vehicles to a fully electrified transportation, further progress is needed. In this regard, the annual International Conference on Advanced Lithium Batteries for Automobile Applications (ABAA) targets the intensive exchange of the involved industrial and research entities to jointly ensure the further progress of this technology. During the past meeting, ABAA-10, held in October 2017 in Chicago, IL, USA, representatives of China, Germany, Japan, and the USA provided a comprehensive overview of the current and future battery R&D activities in their countries, depicting a highly insightful survey about partially concurrent, partially complementary research and funding strategies. Here, the given presentations are provided in the Supplementary Material for this Special Perspective, while this perspective paper may serve as brief introduction to the general development in the field concerning the overall EV sales and common considerations regarding future material developments.

25 ENERGY STORAGE↗
DOE OSTI2017

Shear stress-mediated changes in the expression of complement regulatory protein CD59 on human endothelial progenitor cells by ECM-integrinαVβ3-F-actin pathway in vitro

Highlights: • Shear stress increases the expression of complement regulatory protein CD59 in human EPCs. • Shear stress-induced CD59 expression is closely related to extracellular matrix components. • Shear stress augments the expression of complement regulatory protein CD59 by ECM-integrin-F-actin pathway. Membrane regulatory proteins, such as CD46, CD55, and CD59, prevent excess complement activation and to protect cells from damage. Previous investigations confirmed that shear stress in the physiological range was more favorable for endothelial progenitor cells (EPCs) to repair injured vascular endothelial cells and operates mainly in atheroprotective actions. However, detailed events that contribute to shear stress-induced protection in EPCs, particularly the mechanisms of signal transduction, remain poorly understood. In this study, we observed shear stress-mediated changes in the expression of complement regulatory proteins CD46, CD55, and CD59 on human EPCs and focused on the mechanical transmission mechanism in transformed cells in response to the ECM-F-actin pathway in vitro. Shear stress was observed to promote the expression of complement regulatory protein CD59, but not CD46 or CD55, on EPCs. In addition, the shear stress-induced CD59 expression was confirmed to be associated with the ECM components and was alleviated in EPCs pretreated with GRGDSP, which inhibits ECM components-integrin interaction. Furthermore, shear stress also promotes the rearrangement and polymerization of F-actin. However, shear stress-induced CD59 expression was reduced when the F-actin stress fiber formation process was delayed by Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) or destroyed by cytochalasin D (Cyto D), while Jasplakinolide (JAS) reversed the expression of CD59 through promotion of F-actin polymerization and its stabilizing capacities. Our results indicates that shear stress is an important mediator in EPC expression of CD59 regulated by the ECM-F-actin pathway, which is a key factor in preventing membrane attack complex (MAC) -mediated cell autolysis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Solvothermal synthesis, electromagnetic and electrochemical properties of jellylike cylinder graphene-Mn{sub 3}O{sub 4} composite with highly coupled effect

Jellylike cylinder graphene-Mn{sub 3}O{sub 4} composite with highly coupled effect was successfully synthesized by a simple solvothermal process. Without using toxic reducing agent and expensive equipment, this method is environmental compatible and suitable for low cost mass production. High capacitance Mn{sub 3}O{sub 4} nanoparticles are homogeneously anchored on excellent conductivity graphene framework and a growth mechanism is hypothesized. Excellent electron conductivity and unique structure of Mn{sub 3}O{sub 4}-graphene composite give rise to various applications such as microwave absorber and electrode material. As a microwave absorber, the composite exhibits lowest reflection loss of −14.2 dB in the frequency range of 2–18 GHz. Good microwave absorption performance is due to the structure of the composite where conductive channels form between nano sized Mn{sub 3}O{sub 4} and high conductivity graphene with defects and dangling bonds. As for electrochemical property, Mn{sub 3}O{sub 4}-graphene composite with coupled effect shows excellent performance with highest specific capacitance of 246.7 F g{sup −1} in saturated K{sub 2}SO{sub 4} at a scan rate of 5 mV s{sup −1}. Good electrochemical property is also attributed to the structure with high utilization of Mn{sub 3}O{sub 4}, fast charge carrier transmission, and excellent electronic conductivity. This composite shows a promising application in absorbing materials and electrodes. - Graphical abstract: Graphene-Mn{sub 3}O{sub 4} composite. Display Omitted - Highlights: • Strongly coupled graphene-Mn{sub 3}O{sub 4} composite is synthesized by a solvothermal method. • Excellent microwave absorption property is ascribed to the composite structure. • Good capacitance performance is attributed to the structure and physical property. • The composite shows promising application in absorbing material, and electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Resistive MHD modelling of the quasi-single helicity state in the KTX regimes

Here, the potential formation of a quasi-single-helicity (QSH) state in the Keda Torus eXperiment (KTX) is investigated in resistive MHD simulations using the NIMROD code. We focus on the effects of finite resistivity on the mode structure and characteristics of the dominant linear and nonlinear resistive tearing-mode in a finite β, cylindrical configuration of a reversed field pinch model for KTX. In the typical resistive regimes of KTX where the Lundquist number $S=5 \times 10^4$ , the plasma transitions to a steady QSH state after evolving through an initial transient phase with multiple helicities. The dominant mode of the QSH state develops from the dominant linear tearing mode instability. In the lower β regime, the QSH state is intermittent and short in duration; in the higher β regime, the QSH state persists for a longer time and should be more easily observed in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

ZnFe{sub 2}O{sub 4}/TiO{sub 2} nanocomposite films for photocathodic protection of 304 stainless steel under visible light

Highlights: • Hydrothermal method for synthesizing ZnFe{sub 2}O{sub 4} nanoparticles on TiO{sub 2} NTs. • The photoelectrochemical property of TiO{sub 2} could greatly improve by doping ZnFe{sub 2}O{sub 4}. • The ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films provide a better photocathodic protection for 304SS. - Abstract: ZnFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotubes were fabricated via anodic oxidation and hydrothermal method. The ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films with different concentrations were synthesized to explore the optimal photoelectrochemical property compared with pure TiO{sub 2} nanotubes. The morphology and chemical composition of samples were characterized by scanning electron microscopy, energy-dispersive spectrometry, and X-ray diffraction. The performance of protection for 304 stainless steel was investigated by electrochemical tests, such as open circuit potential and photocurrent density. The results indicate that ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films showed efficient photocathodic protection effect for 304 stainless steel under visible light, and the optimal specimen composite films shifted the corrosion potential of 304 stainless steel to −780 mV.

36 MATERIALS SCIENCE↗