Search NASA⌕ Search

Engineering topics

Li, Jie

Publications and source records attributed to Li, Jie.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase Transitions and Thermal Equation of State of Fe‐9wt.%Si Applied to the Moon and Mercury

Abstract Accurate knowledge of the phase transitions and thermoelastic properties of candidate iron alloys, such as Fe‐Si alloys, is essential for understanding the nature and dynamics of planetary cores. The phase diagrams of some Fe‐Si alloys between 1 atm and 16 GPa have been back‐extrapolated from higher pressures, but the resulting phase diagram of Fe 83.6 Si 16.4 (9 wt.% Si) is inconsistent with temperature‐induced changes in its electrical resistivity between 6 and 8 GPa. This study reports in situ synchrotron X‐ray diffraction (XRD) measurements on pre‐melted and powder Fe 83.6 Si 16.4 samples from ambient conditions to 60 GPa and 900 K using an externally heated diamond‐anvil cell. Upon compression at 300 K, the bcc phase persisted up to ∼38 GPa. The hcp phase appeared near 8 GPa in the pre‐melted sample, and near 17 GPa in the powder sample. The appearance of the hcp phase in the pre‐melted sample reconciles the reported changes in electrical resistivity of a similar sample, thus resolving the low‐pressure region of the phase diagram. The resulting high‐temperature Birch‐Murnaghan equation of state (EoS) and thermal EoS based on the Mie‐Gruneisen‐Debye model of the bcc and hcp structures are consistent with, and complement the literature data at higher pressures. The calculated densities based on the thermal EoS of Fe‐9wt.%Si indicate that both bcc and hcp phases agree with the reported core density estimates for the Moon and Mercury.

Berrada, Meryem↗
DOE OSTI2024

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La 3 Ni 2 O 7

Abstract Recently, superconductivity at high temperatures is observed in bulk La 3 Ni 2 O 7−δ under high pressure. However, the attainment of high‐purity La 3 Ni 2 O 7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La 3 Ni 2 O 7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La 3 Ni 2 O 7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni 2+ /Ni 3+ in Sr‐doped La 3 Ni 2 O 7 , aligning them with those of “La 3 Ni 2 O 7.05” , thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La 3 Ni 2 O 7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La 3 Ni 2 O 7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La 3 Ni 2 O 7−δ , despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Activation of human STING by a molecular glue-like compound

Stimulator of interferon genes (STING) is a dimeric transmembrane adapter protein that plays a key role in the human innate immune response to infection and has been therapeutically exploited for its antitumor activity. The activation of STING requires its high-order oligomerization, which could be induced by binding of the endogenous ligand, cGAMP, to the cytosolic ligand-binding domain. Here we report the discovery through functional screens of a class of compounds, named NVS-STGs, that activate human STING. Our cryo-EM structures show that NVS-STG2 induces the high-order oligomerization of human STING by binding to a pocket between the transmembrane domains of the neighboring STING dimers, effectively acting as a molecular glue. Our functional assays showed that NVS-STG2 could elicit potent STING-mediated immune responses in cells and antitumor activities in animal models.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Nanomaterials and Sustainability

Nanostructuring adds a tremendous degree of tunability to the optical, electronic, magnetic, tribological, and chemical properties of matter. As a result, nanostructured materials already play major roles in the many technologies and industries that provide the comfort and convenience of our everyday lives. Although there are examples of nanostructured materials that currently enhance sustainable technologies, such as for batteries and electrolyzers, the potential impact of nanoscale materials on sustainability has likely not nearly been realized when one considers that the nanostructure–property–composition exploration phase space is almost infinite. We can find inspiration from nature, which builds and assembles nanostructured materials into hierarchical biological structures to perform the enormously complex functions of life, all the while doing so with a relatively small set of elements that are sustainably sourced. This contrasts with current technology, where performance demands often require a greater and greater diversity of elements from the periodic table, some of which are very challenging to be sustainably sourced or recycled.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Using temperature and flow fields to detect gas leakage from canisters containing spent nuclear fuel: Applications to RAMM-TM

The multi-physics STAR-CCM+ code has been used to simulate the temperature and flow fields in canister gas leakage experiments conducted by using a 1/4.5-scale model storage cask. The simulations were conducted at Argonne National Laboratory’s Laboratory Computing Resource Center, utilizing high-performance computing resources. Development of STAR-CCM+ simulation models for the 1/4.5-scale model cask is described herein, followed by validation of the simulation results against experimental data. Canister depressurization and thermal response during gas leakage are discussed, along with analyses of the leakage path and allowable leakage rate. The insights gained from the STAR-CCM+ simulations and leakage analyses will help guide future experiments and actual industry applications of Argonne’s Remote Area Modular Monitoring system for canister surface temperature measurement (RAMM-TM) to enable effective aging management of spent fuel during extended dry storage, as well as help reduce risks to public safety and health and protect the environment.

Canister gas leakage↗
DOE OSTI2023

An in-silico NMR laboratory for nuclear magnetic shieldings computed via finite fields: Exploring nucleus-specific renormalizations of MP2 and MP3

Here we developed and implemented a method-independent, fully numerical, finite difference approach to calculating nuclear magnetic resonance shieldings, using gauge-including atomic orbitals. The resulting capability can be used to explore non-standard methods, given only the energy as a function of finite-applied magnetic fields and nuclear spins. For example, standard second-order Møller-Plesset theory (MP2) has well-known efficacy for 1H and 13C shieldings and known limitations for other nuclei such as 15N and 17O. It is, therefore, interesting to seek methods that offer good accuracy for 15N and 17O shieldings without greatly increased compute costs, as well as exploring whether such methods can further improve 1H and 13C shieldings. Using a small molecule test set of 28 species, we assessed two alternatives: κ regularized MP2 (κ-MP2), which provides energy-dependent damping of large amplitudes, and MP2.X, which includes a variable fraction, X, of third-order correlation (MP3). The aug-cc-pVTZ basis was used, and coupled cluster with singles and doubles and perturbative triples [CCSD(T)] results were taken as reference values. Our κ-MP2 results reveal significant improvements over MP2 for 13C and 15N, with the optimal κ value being element-specific. κ-MP2 with κ = 2 offers a 30% rms error reduction over MP2. For 15N, κ-MP2 with κ = 1.1 provides a 90% error reduction vs MP2 and a 60% error reduction vs CCSD. On the other hand, MP2.X with a scaling factor of 0.6 outperformed CCSD for all heavy nuclei. These results can be understood as providing renormalization of doubles amplitudes to partially account for neglected triple and higher substitutions and offer promising opportunities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomic-scale origin of the low grain-boundary resistance in perovskite solid electrolyte Li 0.375 Sr 0.4375 Ta 0.75 Zr 0.25 O 3

Oxide solid electrolytes (OSEs) have the potential to achieve improved safety and energy density for lithium-ion batteries, but their high grain-boundary (GB) resistance generally is a bottleneck. In the well-studied perovskite oxide solid electrolyte, Li 3x La 2/3-x TiO 3 (LLTO), the ionic conductivity of grain boundaries is about three orders of magnitude lower than that of the bulk. In contrast, the related Li 0.375 Sr 0.4375 Ta 0.75 Zr 0.25 O 3 (LSTZ0.75) perovskite exhibits low grain boundary resistance for reasons yet unknown. Here, we use aberration-corrected scanning transmission electron microscopy and spectroscopy, along with an active learning moment tensor potential, to reveal the atomic scale structure and composition of LSTZ0.75 grain boundaries. Vibrational electron energy loss spectroscopy is applied for the first time to reveal atomically resolved vibrations at grain boundaries of LSTZ0.75 and to characterize the otherwise unmeasurable Li distribution therein. We find that Li depletion, which is a major reason for the low grain boundary ionic conductivity of LLTO, is absent for the grain boundaries of LSTZ0.75. Instead, the low grain boundary resistivity of LSTZ0.75 is attributed to the formation of a nanoscale defective cubic perovskite interfacial structure that contained abundant vacancies. Our study provides new insights into the atomic scale mechanisms of low grain boundary resistivity.

25 ENERGY STORAGE↗
DOE OSTI2023

Inhibition of FAM46/TENT5 activity by BCCIPα adopting a unique fold

The FAM46 (also known as TENT5) proteins are noncanonical poly(A) polymerases (PAPs) implicated in regulating RNA stability. The regulatory mechanisms of FAM46 are poorly understood. Here, we report that the nuclear protein BCCIPα, but not the alternatively spliced isoform BCCIPβ, binds FAM46 and inhibits their PAP activity. Unexpectedly, our structures of the FAM46A/BCCIPα and FAM46C/BCCIPα complexes show that, despite sharing most of the sequence and differing only at the C-terminal portion, BCCIPα adopts a unique structure completely different from BCCIPβ. The distinct C-terminal segment of BCCIPα supports the adoption of the unique fold but does not directly interact with FAM46. The β sheets in BCCIPα and FAM46 pack side by side to form an extended β sheet. A helix-loop-helix segment in BCCIPα inserts into the active site cleft of FAM46, thereby inhibiting the PAP activity. Our results together show that the unique fold of BCCIPα underlies its interaction with and functional regulation of FAM46.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Topological and nodal superconductor kagome magnesium triboride

Recently the kagome compounds have inspired enormous interest and made some great progress such as in the field of superconductivity and topology. Here we predict a different kagome magnesium triboride (Mg⁢B 3 ) superconductor with a calculated T c ~ 12.2K and T c ~ 15.4 K by external stress, the potentially highest among the reported diverse kagome-type superconductors. We reveal its various exotic physical properties including the van Hove singularity, flat-band, multiple Dirac points, and nontrivial topology. The system can be described by a two-band model with highly anisotropic superconducting gaps on Fermi surfaces. Its topological and nodal superconducting nature is unveiled by a recently developed symmetry indicators method. In conclusion, our results suggest that Mg⁢B 3 can be a new platform to study exotic physics in the kagome structure, and pave a way to seek for more superconductors and topological materials with XY 3 -type kagome lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Efficient Calculation of NMR Shielding Constants Using Composite Method Approximations and Locally Dense Basis Sets

This paper presents a systematic study of applying composite method approximations with locally dense basis sets (LDBS) to efficiently calculate NMR shielding constants in small and medium-sized molecules. The pcSseg-n series of basis sets are shown to have similar accuracy to the pcS-n series when n ≥ 1 and can slightly reduce computational costs. We identify two different LDBS partition schemes that perform very effectively for density functional calculations. Here, we select a large subset of the recent NS372 database containing 290 H, C, N, and O shielding values evaluated by reference methods on 106 molecules to carefully assess methods of the high, medium, and low computational costs to make practical recommendations. Our assessment covers conventional electronic structure methods (density functional theory and wave function) with global basis calculations, as well as their use in one of the satisfactory LDBS approaches, and a range of composite approaches, also with and without LDBS. Altogether 99 methods are evaluated. On this basis, we recommend different methods to reach three different levels of accuracy and time requirements across the four nuclei considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrical Manipulation of Topological Phases in a Quantum Anomalous Hall Insulator

Quantum anomalous Hall phases arising from the inverted band topology in magnetically doped topological insulators have emerged as an important subject of research for quantization at zero magnetic fields. Though necessary for practical implementation, sophisticated electrical control of molecular beam epitaxy (MBE)-grown quantum anomalous Hall matter have been stymied by growth and fabrication challenges. Here, in this study, a novel procedure is demonstrated, employing a combination of thin-film deposition and 2D material stacking techniques, to create dual-gated devices of the MBE-grown quantum anomalous Hall insulator, Cr-doped (Bi,Sb) 2 Te 3 . In these devices, orthogonal control over the field-induced charge density and the electric displacement field is demonstrated. A thorough examination of material responses to tuning along each control axis is presented, realizing magnetic property control along the former and a novel capability to manipulate the surface exchange gap along the latter. Through electrically addressing the exchange gap, the capabilities to either strengthen the quantum anomalous Hall state or suppress it entirely and drive a topological phase transition to a trivial state are demonstrated. The experimental result is explained using first principle theoretical calculations, and establishes a practical route for in situ control of quantum anomalous Hall states and topology.

36 MATERIALS SCIENCE↗