Search NASA⌕ Search

Engineering topics

Li, Jin

Publications and source records attributed to Li, Jin.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

The fluoride-salt-cooled high-temperature reactor (FHR) is one of the advanced reactors that has been attracting considerable interest from both the research community and the nuclear industry. To help facilitate the nuclear community's familiarity with the FHR, Kairos Power has developed a generic FHR (gFHR) benchmark. In the research performed here, this benchmark was used to assess innovative modeling methods that combine stochastic and deterministic computer codes to perform the design and analysis of the gFHR. Further, the Monte Carlo code Serpent 2 was used to generate few-group cross sections that were then used in the neutron diffusion and thermal-fluids code AGREE to perform full-core neutronics and thermal-fluids steady-state and transient core analysis. The Argonne National Laboratory code SAM was then used to model the gFHR system and to simulate the load-follow operation of the gFHR.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Precision studies of QCD in the low energy domain of the EIC

This White Paper aims at highlighting the important benefits in the science reach of the EIC. High luminosity operation is generally desirable, as it enables producing and harvesting scientific results in a shorter time period. Furthermore, it becomes crucial for programs that would require many months or even years of operation at lower luminosity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Unraveling the size fluctuation and shrinkage of nanovoids during in situ radiation of Cu by automatic pattern recognition and phase field simulation

Void formation is an important aspect of irradiation response of metals. In situ transmission electron microscopy observation for void evolution during irradiation is an effective technique for studying void evolution. However, the amount of data collected during in situ studies drastically overwhelm the current capability for manual data analyses. Here, we used a data-driven approach where a convolutional neural network combined with greedy matching to detect and track nanovoid evolutions and migrations. This approach was able to discover the surprising phenomena of void size fluctuation and shrinkage during irradiation of Cu with pre-existing nanovoids. Phase–field simulations revealed the fundamental mechanism behind this in situ observed phenomenon of void size fluctuation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mitigating life cycle GHG emissions of roads to be built through 2030: Case study of a Chinese province

We report the expansion of road networks in emerging economies such as China causes significant greenhouse gas (GHG) emissions. This development is conflicting with China's commitment to achieve carbon neutrality. Thus, there is a need to better understand life cycle emissions of road infrastructure and opportunities to mitigate these emissions. Existing impact studies of roads in developing countries do not address recycled materials, improved pavement maintenance, or pavement-vehicle interaction and electric vehicle (EV) adoption. Combining firsthand information from Chinese road construction engineers with publicly available data, this paper estimates a comprehensive account of GHG emissions of the road pavement network to be constructed in the next ten years in the Shandong province in Northern China. Further, we estimate the potential of GHG emission reductions achievable under three scenario sets: maintenance optimization, alternative pavement material replacement, and EV adoption. Results show that the life cycle GHG emissions of highways and Class 1–4 roads to be constructed in the next 10 years amount to 147 Mt CO2-eq. Considering the use phase in our model reveals that it is the dominant stage in terms of emissions, largely due to pavement-vehicle interaction. Vehicle electrification can only moderately mitigate these emissions. Other stages, such as materials production and road maintenance and rehabilitation, contribute substantially to GHG emissions as well, highlighting the importance of optimizing the management of these stages. Surprisingly, longer, not shorter maintenance intervals, yield significant emission reductions. Another counter-intuitive finding is that thicker and more material-intensive pavement surfaces cause lower emissions overall. Taken together, optimal maintenance and rehabilitation schedules, alternative material use, and vehicle electrification provide GHG reduction potentials of 11%, 4%–16% and 2%–6%, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Targeted polyelectrolyte complex micelles treat vascular complications in vivo

Vascular disease is a leading cause of morbidity and mortality in the United States and globally. Pathological vascular remodeling, such as atherosclerosis and stenosis, largely develop at arterial sites of curvature, branching, and bifurcation, where disturbed blood flow activates vascular endothelium. Current pharmacological treatments of vascular complications principally target systemic risk factors. Improvements are needed. We previously devised a targeted polyelectrolyte complex micelle to deliver therapeutic nucleotides to inflamed endothelium in vitro by displaying the peptide VHPKQHR targeting vascular cell adhesion molecule 1 (VCAM-1) on the periphery of the micelle. This paper explores whether this targeted nanomedicine strategy effectively treats vascular complications in vivo. Disturbed flow-induced microRNA-92a (miR-92a) has been linked to endothelial dysfunction. We have engineered a transgenic line (miR-92a EC-TG /Apoe –/– ) establishing that selective miR-92a overexpression in adult vascular endothelium causally promotes atherosclerosis in Apoe –/– mice. We tested the therapeutic effectiveness of the VCAM-1–targeting polyelectrolyte complex micelles to deliver miR-92a inhibitors and treat pathological vascular remodeling in vivo. VCAM-1–targeting micelles preferentially delivered miRNA inhibitors to inflamed endothelial cells in vitro and in vivo. The therapeutic effectiveness of anti–miR-92a therapy in treating atherosclerosis and stenosis in Apoe –/– mice is markedly enhanced by the VCAM-1–targeting polyelectrolyte complex micelles. These results demonstrate a proof of concept to devise polyelectrolyte complex micelle-based targeted nanomedicine approaches treating vascular complications in vivo.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Photodepositing CdS on the Active Cyano Groups Decorated g‐C 3 N 4 in Z‐Scheme Manner Promotes Visible‐Light‐Driven Hydrogen Evolution

Abstract g‐C 3 N 4 /CdS heterojunctions are potential photocatalysts for hydrogen production but their traditional type‐II configuration generally leads to weak oxidative and reductive activity. How to construct the novel Z‐scheme g‐C 3 N 4 /CdS counterparts to address this issue remains a great challenge in this field. In this work, a new direct Z‐scheme heterojunction of defective g‐C 3 N 4 /CdS is designed by introducing cyano groups (NC‐) as the active bridge sites. Experimental observations in combination with density functional theory (DFT) calculations reveal that the unique electron‐withdrawing feature of cyano groups in the defective g‐C 3 N 4 /CdS heterostructure can endow this photocatalyst with numerous advantageous properties including high light absorption ability, strong redox performance, satisfactory charge separation efficiency, and long lifetime of charge carriers. Consequently, the resultant photocatalytic system exhibits more active performance than CdS and g‐C 3 N 4 under visible light and reaches an excellent hydrogen evolution rate of 1809.07 µmol h −1 g −1 , which is 6.09 times higher than pristine g‐C 3 N 4 . Moreover, the defective g‐C 3 N 4 /CdS photocatalyst maintains good stability after 40 h continuous test. This work provides new insights into design and construction of Z‐scheme heterojunctions for regulating the visible‐light‐induced photocatalytic activity for H 2 evolution.

Wang, Zhipeng↗
DOE OSTI2021

Enhanced defect annihilation capability of the graphene/copper interface: An in situ study

It is well known that energetic heavy ion irradiations can often induce defects and ultimately lead to material degradations. Interfaces, such as high-angle grain boundaries (HAGBs), are generally used as defect sinks for alleviating the irradiation damage. However, HAGBs are often unstable during radiation. Here we investigate the interfacial irradiation responses of the graphene (Gr)/Cu composites by using in situ Kr ++ ions irradiation under transmission electron microscopy. The results revealed that the Gr/Cu interface exhibits higher defect annihilation capability compared to the HAGBs in Cu. Moreover, the atomistic simulations suggested a slightly higher and larger range of stress field for the Gr/Cu interface, which contributes to the enhanced defects absorption capability. The present findings are essential to understand and design a new class of carbon/metal composites with superior irradiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Heavy ion irradiation response of an additively manufactured 316LN stainless steel

Additive manufacturing has become an appealing technique to fabricate three-dimensional metallic materials and components for nuclear reactors. However, response of additively manufactured alloys to high-dose heavy ion irradiations at elevated temperatures is still not well understood. Here, an additively manufactured 316LN austenitic stainless steel with high-density solidification cells was irradiated using 3.5 MeV Fe ion to a peak dose of 220 dpa at 450 °C. Microscopy studies show a lower Frank loop density and smaller size in the additively manufactured sample compared with its cold worked counterpart, and the cellular structures may largely suppress the formation of perfect loops and dislocation networks and reduce the magnitude of solute segregations comparing with high angle grain boundaries. In conclusion, the present work advances the understanding on the high-temperature irradiation response of additively manufactured steels for nuclear reactor applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal Stability of Nanocrystalline Gradient Inconel 718 Alloy

Gradient structures containing nanograins in the surface layer have been introduced into Inconel 718 (IN718) nickel-based alloy using the surface mechanical grinding treatment technique. The thermal stability of the gradient IN718 alloy was investigated. Annealing studies reveal that nanograins with a grain size smaller than 40 nm exhibited significantly better thermal stability than those with larger grain size. Transmission electron microscopy analyses reveal that the enhanced thermal stability was attributed to the formation of grain boundaries with low energy configurations. This study provides new insight on strategies to improve the thermal stability of nanocrystalline metals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The influence of stacking faults on mechanical behavior of advanced materials

We report there are abundant studies on deformation mechanisms in metallic materials dominated by grain boundaries and twin boundaries. In comparison, the influence of stacking faults on deformation mechanisms of materials remains less well understood. Recent studies have shown that when the density of stacking faults increases sharply, their influence on mechanical behavior of metallic or ceramic materials becomes prominent, and in fact, dominates in some cases. This article reviews recent research progress on how nanoscale stacking faults impact the mechanical behavior of metallic and ceramic materials. We primarily focus on studies that reveal the formation of pre-existing stacking faults, their interactions with dislocations, and phase transformations during plastic deformation as evidenced by experiments and simulations. The aim of this review is to highlight the potential opportunities in using stacking faults to tailor the deformation mechanisms of advanced materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Characterization of precipitation in gradient Inconel 718 superalloy

Inconel 718 (IN718) superalloy is a well-established material for the application of aircraft engine and power generator due to its excellent performance at high temperatures. The outstanding mechanical properties of IN718 are largely determined by the precipitates. Here, we investigated the precipitation behaviors and the corresponding mechanical properties of the heat-treated gradient IN718 alloy. The microscopy studies reveal that high-density hexagonal η phase with chemistry of Ni 3 (Al,Ti,Nb) formed in the nanograined IN718 alloy after annealing at 700 °C. Additionally, the compressive stress introduced during severe plastic deformation may have prohibited the formation of γ” phase while accelerated the precipitation of γ’ phase, consequently favoring the precipitation of η phase. The corresponding evolution of mechanical behavior of gradient IN718 alloy is investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Irradiation induced void spheroidization, shrinkage and migration in Cu at elevated temperatures: An in situ study

We show understanding the void evolution in irradiation environment is of great interest and significance, as irradiation-induced voids typically lead to pronounced volumetric swelling and degradation of mechanical properties. In situ studies on the irradiation response of nanovoids at elevated temperature remain limited. In this work, we performed systematic in situ 1 MeV Kr ++ irradiations on Cu with nanovoids in a transmission electron microscope up to 350 °C. The in situ studies revealed intriguing void spheroidization, shrinkage and migration. Furthermore, the morphology evolution and migration of nanovoids showed a strong dependence on irradiation temperature and initial void size. Post-irradiation analyses identified defect clusters in the form of stacking fault tetrahedrons, and the remaining large faceted nanovoids. The underlying mechanisms of irradiation-induced void spheroidization and shrinkage were discussed based on phase-field modeling.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Recent Studies on Void Shrinkage in Metallic Materials Subjected to In Situ Heavy Ion Irradiations

The continuous formation and growth of voids induced by radiations in metallic materials may lead to significant microstructure damage and degradation of mechanical properties. In sharp contrast to the void swelling commonly observed in irradiated metallic materials, nanovoids in nanoporous metallic materials are found to shrink during radiation and thus nanovoids enhance the radiation tolerance of metallic materials. This article reviews recent studies on size-dependent void shrinkage in metallic materials subject to in situ heavy ion irradiation. Furthermore, we demonstrate the capability of machine learning in identifying and tracking the evolution of nanovoids. Finally, the physical mechanisms of radiation induced void shrinkage revealed by simulation studies are briefly summarized.

36 MATERIALS SCIENCE↗
DOE OSTI2020

He ion irradiation response of a gradient T91 steel

Metallic materials with a gradient microstructure usually exhibit excellent mechanical properties. How- ever, the radiation response of gradient structural materials is less well understood. In this work, room- temperature He ion irradiation up to ~4.5 dpa with ~10 at% He injection was performed on a gradient T91 steel processed by surface severe plastic deformation. In comparison to the coarse-grained ferritic T91, the gradient T91 with the nanocrystalline layers shows improved radiation tolerance in terms of less bubble swelling and radiation hardening. Additionally, bubble distribution along grain boundaries depends on misorientation angle suggesting a strong capacity of non-equilibrium grain boundaries in storing He atoms. The present study provides insight into the design of radiation tolerant gradient steels for nuclear industry applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Deformation behavior and phase transformation of nanotwinned Al/Ti multilayers

We report nanotwinned Al/Ti multilayers have exhibited size-dependent microstructure evolution and high strength. However, their deformation mechanisms are less well understood. In this work, we investigated the deformation mechanisms of nanotwinned Al/Ti multilayers with FCC/HCP layer interfaces by using in situ micropillar compression tests. Nanotwinned Al/Ti multilayers exhibit compressive strength up to 2.4 GPa and good work hardening capability. Post-compression TEM analyses reveal high-density stacking faults and the HCP-to-FCC phase transformations in Ti. Molecular dynamics simulations elucidate the mechanisms of deformation induced phase transformation in Ti and the influence of collective movement of partial dislocations on the deformability of Al/Ti multilayers.

36 MATERIALS SCIENCE↗