Search NASA⌕ Search

Engineering topics

Li, Ju

Publications and source records attributed to Li, Ju.

At least 91 records · Page 5

Engineering single-atom dynamics with electron irradiation

Atomic engineering is envisioned to involve selectively inducing the desired dynamics of single atoms and combining these steps for larger-scale assemblies. Here, we focus on the first part by surveying the single-step dynamics of graphene dopants, primarily phosphorus, caused by electron irradiation both in experiment and simulation, and develop a theory for describing the probabilities of competing configurational outcomes depending on the postcollision momentum vector of the primary knock-on atom. The predicted branching ratio of configurational transformations agrees well with our atomically resolved experiments. This suggests a way for biasing the dynamics toward desired outcomes, paving the road for designing and further upscaling atomic engineering using electron irradiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Making metals linear super-elastic with ultralow modulus and nearly zero hysteresis

We demonstrate a novel materials design approach to achieve unprecedented properties by utilizing nanoscale chemo-mechanical coupling. In particular, by using computer simulations we demonstrate how to engineer ultralow modulus (12 GPa), nearly hysteresisfree, and linear super-elastic metals with a giant elastic strain limit (2.7%) by creating appropriate concentration modulations (CMs) at the nanoscale in the parent phase and by pre-straining to regulate the stress-induced martensitic transformation (MT). The nanoscale CMs created via spinodal decomposition produce corresponding phase stability modulations, suppress autocatalysis in nucleation, impose nano-confinements on growth, and hinder long-range ordering of transformation strain during the MT, which changes the otherwise sharp first-order transition into a smeared, macroscopically continuous transition over a large stress range. The pre-straining generates retained martensitic particles that are stable at the test temperature after unloading and act as operational nuclei in subsequent load cycles, eliminating the stress–strain hysteresis and offering an ultralow apparent Young’s modulus. Materials with a high strength and an ultralow apparent Young’s modulus have great potential for application in orthopaedic implants.

36 MATERIALS SCIENCE↗

An ethyl methyl sulfone co-solvent eliminates macroscopic morphological instabilities of lithium metal anode

Lithium metal anodes suffer from a short cycle life, and the parasitic reactions of lithium with electrolytes are widely observed. Common sense is to avoid such reactions. Here in this paper, we head in the opposite direction by using an oxidizing co-solvent, ethyl methyl sulfone, in the electrolyte, which addresses the ‘dendrite’ issue entirely, resulting in a dense and macroscopically smooth surface morphology of the plated lithium. However, a dendrite-free lithium metal anode does not necessarily exhibit a high coulombic efficiency.

25 ENERGY STORAGE↗

Microwave growth and tunable photoluminescence of nitrogen-doped graphene and carbon nitride quantum dots

Tunable photoluminescent nitrogen-doped graphene and graphitic carbon nitride (g-C 3 N 4 ) quantum dots are synthesized via a facile solid-phase microwave-assisted (SPMA) technique utilizing the pyrolysis of citric acid and urea precursors. The atomic ratio, surface functionalization, and atomic structure of as-prepared quantum dots strongly depend on the ratio of citric acid to urea. The quantum dots have a homogeneous particle size and tend to form a circle and/or ellipse shape to minimize the edge free energy. The atomic ratio of surface nitrogen to carbon (N/C) in the quantum dots can reach as high as 1.74, among the highest values reported in the literature. The SPMA technique is capable of producing high-quality quantum dots with photoluminescence (PL) emission at various wavelengths on a pilot scale. The atomic structures of the N-doped graphene and g-C 3 N 4 quantum dots are investigated using molecular dynamics simulations. Increasing the urea concentration increases the tendency of in-plane N ( i.e. , quaternary N) substitution over that of other amino functionalizations, such as pyrrolic and pyridinic N. The PL emission can be precisely tuned via a one-step SPMA method by adjusting the precursor composition. A high quantum yield of 38.7% is achieved with N-doped graphene quantum dots, indicating the substantial influence of the N- and O-rich edge groups on the enhancement of PL efficiency. A bandgap structure is introduced to describe the interstate (π*–π) transition of quantum dots. This work presents a novel approach for engineering the chemical composition and atomic structure of graphene and g-C 3 N 4 quantum dots, facilitating their research and applications in optical, electronic, and biomedical devices.

36 MATERIALS SCIENCE↗

Nanotube/Nanowire as Effective Defect Sinks in Metals—Atomistic Simulations and In Situ Ion Radiation Transmission Electron Microscopy

The accumulation of defects during irradiation leads to material property degradation modes such as embrittlement and swelling, eventually causing material failure. Effective and efficient removal of defects is of crucial importance to design radiation damage-tolerant materials. Here, by biasing defect migration pathways via carbon nanotube (CNT) infiltration, we present a greatly enhanced damage-tolerant Al-CNT composite with defect storage measured to be one order of magnitude lower than that in pure, irradiated Al. Furthermore, extreme-value statistics (largest size) of defect clusters are significantly changed in the presence of CNT. In situ ion irradiation transmission electron microscopy (TEM) experiments and atomistic simulations together reveal the dynamic evolution and convergent diffusion of radiation-induced defects to CNTs, facilitating defect recombination and enhancing radiation tolerance. The occurrence of CNT-biased defect convergent migration is tuned by the thermodynamic driving force of stress gradient in Al matrix due to the CNT phase transformation. This approach to controlling defect migration using 1D interface engineering creates a new opportunity to enhance the properties of nuclear materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Turning a native or corroded Mg alloy surface into an anti-corrosion coating in excited CO 2

Despite their energy-efficient merits as promising light-weight structural materials, magnesium (Mg) based alloys suffer from inadequate corrosion resistance. One primary reason is that the native surface film on Mg formed in air mainly consists of Mg(OH) 2 and MgO, which is porous and unprotective, especially in humid environments. Here, we demonstrate an environmentally benign method to grow a protective film on the surface of Mg/Mg alloy samples at room temperature, via a direct reaction of already-existing surface film with excited CO 2 . Moreover, for samples that have been corroded obviously on surface, the corrosion products can be converted directly to create a new protective surface. Mechanical tests show that compared with untreated samples, the protective layer can elevate the yield stress, suppress plastic instability and prolong compressive strains without peeling off from the metal surface. This environmentally friendly surface treatment method is promising to protect Mg alloys, including those already-corroded on the surface.

36 MATERIALS SCIENCE↗

(M4CT-18IN0707093) Investigating Electrochemical Impedance Spectroscopic (EIS) Measurement of Surrogate Oxide at High Temperatures

The objective of this work package is to develop electrochemical impedance spectroscopic (EIS) techniques for the in-pile measurement of changes in solid state chemistry of fuels and materials in coupling with model simulation and material characterization. This work package will involve the initial development of electrochemical sensing technologies for measuring spatial- and time-resolved changes in fuel and cladding chemistry. Specific attention will be paid to monitoring changes in fuel stoichiometry, monitor cladding hydride formation and deformation, and cladding corrosion. The planned work during this period was focused on theoretical investigation on high temperature impedance of material, establishing experimental capabilities, including high temperature EIS under controlled gas atmosphere, atom probe tomography (APT), Raman Spectroscopy, and Synchrotron XRD. Future work will focus on starting the electrochemical sensor development, targeting the dielectric response of oxide fuels and cladding oxides/hydrides under thermodynamic equilibria, during transients, and under irradiation. Three main achievements are summarized in this report for the FY17 carry-over. First, theoretical investigation on high temperature impedance of material were conducted and spatial distribution of defects and equivalent resistivity in stoichiometric oxides under a temperature gradient were analyzed. Second, a laboratory for EIS measurement at high temperature was established and the laboratory instruction (LI) for conducting experiments was approved; and the impedance of CeO2 at 800 C was examined and its electrical conductivities were analyzed and compared with other reported data. In addition, the capabilities of advanced characterization wer established including high temperature Ramen, atom probe tomography (APT) and SEM, and samples including Zr4 and CeO2 were characterized.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Liquid-Like, Self-Healing Aluminum Oxide during Deformation at Room Temperature

Effective protection from environmental degradation relies on the integrity of oxide as diffusion barriers. Ideally, the passivation layer can repair its own breaches quickly under deformation. While studies suggest that the native aluminum oxide may manifest such properties, it has yet to be experimentally proven because direct observations of the air-environmental deformation of aluminum oxide and its initial formation at room temperature are challenging. In this letter, we report in situ experiments to stretch pure aluminum nanotips under O 2 gas environments in a transmission electron microscope (TEM). We discovered that aluminum oxide indeed deforms like liquid and can match the deformation of Al without any cracks/spallation at moderate strain rate. At higher strain rate, we exposed fresh metal surface, and visualized the self-healing process of aluminum oxide at atomic resolution. Unlike traditional thin-film growth or nanoglass consolidation processes, we observe seamless coalescence of new oxide islands without forming any glass–glass interface or surface grooves, indicating greatly accelerated glass kinetics at the surface compared to the bulk.

36 MATERIALS SCIENCE↗

Establishing New Capability of High Temperature Electrochemical Impedance Spectroscopy Techniques for Equilibrium and Kinetic Experiments

In nuclear fuel and cladding materials, changes in structure and chemistry over the lifetime of the fuel can have a significant impact on fuel and reactor performance. Currently, chemical evolution over the lifetime of the fuel can only be inferred using post-irradiation examination. As an alternative to post-irradiation measurements, electrochemical impedance spectroscopy (EIS) can provide an in-pile measurement of changes in chemistry in oxides and hydrides coupling with modeling such as finite element (FE) and other material characterization techniques such as atom probe tomography (APT), Raman spectroscopy, in-situ Transmission Electron Microscopy (TEM), and synchrotron X-ray microscopy. The objective of this work package is to develop EIS techniques for the in-pile measurement of changes in solid state chemistry of fuels and materials in coupling with model simulation and material characterization. This work package will involve the initial development of electrochemical sensing technologies for measuring spatial- and time-resolved changes in fuel and cladding chemistry. Specific attention will be paid to monitoring changes in fuel stoichiometry, monitor cladding hydride formation and deformation, and cladding corrosion. This report summarized the FY17 achievements of this work package. A laboratory was begun to set up from scratch. The laboratory place was located; necessary equipment and materials were purchased and some were delivered; laboratory instruction (LI) for conducting experiments was drafted for review; radiation level of depleted UO2 that will be investigated as the potential testing sample was valued for safety issue; a testing plan for measuring changes in stoichiometry of oxide fuels has been made and roadblocks for making measurements at high temperature have been pinpointed; in addition, collaboration with Boise State University (BSU) and Massachusetts Institute of Technology (MIT) has been established. In short, the capability of applying EIS for in-pile measurement of changes of fuels and cladding materials was initiated to be established.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

How Solid-Electrolyte Interphase Forms in Aqueous Electrolytes

Solid-electrolyte interphase (SEI) is the key component that enables all advanced electrochemical devices, the best representative of which is Li-ion battery (LIB). It kinetically stabilizes electrolytes at potentials far beyond their thermodynamic stability limits, so that cell reactions could proceed reversibly. Its ad hoc chemistry and formation mechanism has been a topic under intensive investigation since the first commercialization of LIB 25 years ago. Traditionally SEI can only be formed in nonaqueous electrolytes. However, recent efforts successfully transplanted this concept into aqueous media, leading to significant expansion in the electrochemical stability window of aqueous electrolytes from 1.23 V to beyond 4.0 V. This not only made it possible to construct a series of high voltage/energy density aqueous LIBs with unprecedented safety, but also brought high flexibility and even “open configurations” that have been hitherto unavailable for any LIB chemistries. While this new class of aqueous electrolytes has been successfully demonstrated to support diversified battery chemistries, the chemistry and formation mechanism of the key component, an aqueous SEI, has remained virtually unknown. In this work, combining various spectroscopic, electrochemical and computational techniques, we rigorously examined this new interphase, and comprehensively characterized its chemical composition, microstructure and stability in battery environment. A dynamic picture obtained reveals how a dense and protective interphase forms on anode surface under competitive decompositions of salt anion, dissolved ambient gases and water molecule. By establishing basic laws governing the successful formation of an aqueous SEI, the in-depth understanding presented in this work will assist the efforts in tailor-designing better interphases that enable more energetic chemistries operating farther away from equilibria in aqueous media.

25 ENERGY STORAGE↗

Sliding of coherent twin boundaries

Coherent twin boundaries (CTBs) are internal interfaces that can play a key role in markedly enhancing the strength of metallic materials while preserving their ductility. They are known to accommodate plastic deformation primarily through their migration, while experimental evidence documenting large-scale sliding of CTBs to facilitate deformation has thus far not been reported. We show here that CTB sliding is possible whenever the loading orientation enables the Schmid factors of leading and trailing partial dislocations to be comparable to each other. This theoretical prediction is confirmed by real-time transmission electron microscope experimental observations during uniaxial deformation of copper pillars with different orientations and is further validated at the atomic scale by recourse to molecular dynamics simulations. Our findings provide mechanistic insights into the evolution of plasticity in heavily twinned face-centered cubic metals, with the potential for optimizing mechanical properties with nanoscale CTBs in material design.

36 MATERIALS SCIENCE↗

Lithium titanate hydrates with superfast and stable cycling in lithium ion batteries

Lithium titanate and titanium dioxide are two best-known high-performance electrodes that can cycle around 10,000 times in aprotic lithium ion electrolytes. Here we show there exists more lithium titanate hydrates with superfast and stable cycling. That is, water promotes structural diversity and nanostructuring of compounds, but does not necessarily degrade electrochemical cycling stability or performance in aprotic electrolytes. As a lithium ion battery anode, our multi-phase lithium titanate hydrates show a specific capacity of about 130 mA h g –1 at ~35 C (fully charged within ~100 s) and sustain more than 10,000 cycles with capacity fade of only 0.001% per cycle. In situ synchrotron diffraction reveals no 2-phase transformations, but a single solid-solution behavior during battery cycling. Here, so instead of just a nanostructured intermediate to be calcined, lithium titanate hydrates can be the desirable final destination.

25 ENERGY STORAGE↗

Signature of Metallic Behavior in the Metal–Organic Frameworks M 3 (hexaiminobenzene) 2 (M = Ni, Cu)

The two-dimensionally connected metal- organic frameworks (MOFs) Ni 3 (HIB) 2 and Cu 3 (HIB) 2 (HIB = hexaiminobenzene) are bulk electrical conductors and exhibit ultraviolet-photoelectron spectroscopy (UPS) signatures expected of metallic solids. Electronic band structure calculations confirm that in both materials the Fermi energy lies in a partially filled delocalized band. Together with additional structural characterization and microscopy data, our results represent the first report of metallic behavior and permanent porosity coexisting within a metal-organic framework.

36 MATERIALS SCIENCE↗

Effect of hydrogen on the integrity of aluminium–oxide interface at elevated temperatures

Hydrogen can facilitate the detachment of protective oxide layer off metals and alloys. The degradation is usually exacerbated at elevated temperatures in many industrial applications; however, its origin remains poorly understood. Here by heating hydrogenated aluminum inside an environmental transmission electron microscope, we show that hydrogen exposure of just a few minutes can greatly degrade the high temperature integrity of metal–oxide interface. Moreover, there exists a critical temperature of ~150 °C, above which the growth of cavities at the metal–oxide interface reverses to shrinkage, followed by the formation of a few giant cavities. Vacancy supersaturation, activation of a long-range diffusion pathway along the detached interface and the dissociation of hydrogen-vacancy complexes are critical factors affecting this behavior. In conclusion, these results enrich the understanding of hydrogen-induced interfacial failure at elevated temperatures.

36 MATERIALS SCIENCE↗