Search NASA⌕ Search

Engineering topics

Li, Junying

Publications and source records attributed to Li, Junying.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Correlated Displacement of Dynamic Elastic Dipoles Produces Nonclassical Electrostriction in Zr-Doped Ceria

By combining experimental data with density functional theory-based ab initio molecular dynamics modeling, this work provides evidence that nonclassical electrostriction in isovalent Zr-doped ceria is due to the correlated anharmonic motion of dynamic elastic dipoles associated with multiple [ZrO 8 ]-local bonding units with a high Zr concentration (Zr 0.1 Ce 0.9 O 2 ). Introduction of 0.5 mol % trivalent or divalent codopants (Sc, Yb, La, or Ca) reduces the longitudinal electrostriction strain coefficient by more than a factor of 10, produces a 3-fold decrease in the relative dielectric permittivity, and increases the elastic modulus. Since these changes depend neither on the radius nor on the valency of the codopant, we conclude that the responsible species are charge-compensating oxygen vacancies (VO). For trivalent dopants (Do 0.005 Zr 0.1 Ce 0.895 O 1.9975 ), oxygen vacancies are present at a concentration ratio 1:40 with respect to Zr, giving, for random distribution, a characteristic interaction distance of ≤2.3 unit cells (1.2 nm). Oxygen vacancies participate in [ZrO 7 -V O ] local bonding units, disrupting the correlated dynamic displacements of the connected [ZrO 8 ]-local bonding units. Finally, such correlated motion of dynamic elastic dipoles may also explain the exponential increase in the longitudinal electrostriction strain coefficient with an increase in Zr concentration to <0.2 mole fraction and must be taken into account for further development of nonclassical electrostrictors based on Zr-doped ceria.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Lead-free Zr-doped ceria ceramics with low permittivity displaying giant electrostriction

Electrostrictors, materials developing mechanical strain proportional to the square of the applied electric field, present many advantages for mechanical actuation as they convert electrical energy into mechanical, but not vice versa. Both high relative permittivity and reliance on Pb as the key component in commercial electrostrictors pose serious practical and health problems. Here we describe a low relative permittivity (<250) ceramic, Zr x Ce 1-x O 2 (x < 0.2), that displays electromechanical properties rivaling those of the best performing electrostrictors: longitudinal electrostriction strain coefficient ~10 -16 m 2 /V 2 ; relaxation frequency ≈ a few kHz; and strain ≥0.02%. Combining X-ray absorption spectroscopy, atomic-level modeling and electromechanical measurements, here we show that electrostriction in Zr x Ce 1-x O 2 is enabled by elastic dipoles produced by anharmonic motion of the smaller isovalent dopant (Zr). Unlike the elastic dipoles in aliovalent doped ceria, which are present even in the absence of an applied elastic or electric field, the elastic dipoles in Zr x Ce 1-x O 2 are formed only under applied anisotropic field. The local descriptors of electrostrictive strain, namely, the cation size mismatch and dynamic anharmonicity, are sufficiently versatile to guide future searches in other polycrystalline solids.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase segregation and miscibility of TiO x nanocomposites in Gd-doped ceria solid electrolyte material

Electro-chemo-mechanical (ECM) coupling refers to mechanical deformation due to electrochemically driven compositional change in a solid. An ECM actuator producing micrometre-size displacements and long-term stability at room temperature was recently reported, comprising a 20 mol% Gd-doped ceria (20GDC), a solid electrolyte membrane, placed between two working bodies made of TiO x /20GDC (Ti-GDC) nanocomposites with Ti concentration of 38 mol%. The volumetric changes originating from oxidation or reduction in the local TiO x units are hypothesized to be the origin of mechanical deformation in the ECM actuator. Studying the Ti concentration-dependent structural changes in the Ti-GDC nanocomposites is therefore required for (i) understanding the mechanism of dimensional changes in the ECM actuator and (ii) maximizing the ECM response. Here, the systematic investigation of the local structure of the Ti and Ce ions in Ti-GDC over a broad range of Ti concentrations using synchrotron X-ray absorption spectroscopy and X-ray diffraction is reported. The main finding is that, depending on the Ti concentration, Ti atoms either form a cerium titanate or segregate into a TiO 2 anatase-like phase. The transition region between these two regimes with Ti(IV) concentration between 19% and 57% contained strongly disordered TiO x units dispersed in 20GDC containing Ce(III) and Ce(IV) and hence rich with oxygen vacancies. As a result, this transition region is proposed to be the most advantageous for developing ECM-active materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

X-ray Absorption Spectroscopy Studies of a Molecular CO 2 -Reduction Catalyst Deposited on Graphitic Carbon Nitride

Metal-ligand complexes have been extensively explored as well-defined molecular catalysts in small molecule activation reactions such as carbon dioxide (CO 2 ) reduction. Many hybrid photocatalysts have been prepared by coupling such complexes with photoactive surfaces for use in solar CO 2 reduction. In this work, we employ X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopies, density functional theory (DFT) and computational XANES modeling to interrogate the structure of a hybrid photocatalyst consisting of a macrocyclic cobalt complex deposited on graphitic carbon nitride (C 3 N 4 ). Results show that the cobalt complex binds on C 3 N 4 through surface OH or NH 2 groups. By refining the local geometry and binding sites of this well-defined molecular cobalt complex on C 3 N 4 , here we established an important benchmark for modeling a large class of molecular catalysts that can be adapted to in situ/operando studies and further enhanced by applying chemometrics-based approaches and machine learning methods of XANES data analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing the Structure of Single Cobalt Sites in Carbon Nitride for Photocatalytic CO 2 Reduction

Single Co 2+ sites in graphitic carbon nitride (C 3 N 4 ) have demonstrated excellent activity and selectivity in photocatalytic CO 2 reduction. In this work, we combine computational and spectroscopic tools, including X-ray absorption spectroscopy, to probe the structure of such single Co 2+ sites. Our results indicate that the Co 2+ sites exist in the Co–N 2+2 coordination at the edges of C 3 N 4 flakes. This mode of coordination is further supported by experimental results obtained using single Co 2+ sites in C 3 N 4 materials treated with NH 3 , which contain more edge sites than untreated C 3 N 4 . In our experimental observations, doping C 3 N 4 with carbon is found to be important for the photocatalytic properties of the single Co 2+ sites. Here, a simplified model is proposed to explain the origin of the observed enhancement effect of C doping. In this model, the presence of C dopant near the metal centers results in shorter Co–N bond length and stronger Co–N binding energy. In addition to enhanced light absorption and charge separation in C-doped C 3 N 4 , the stronger Co–N binding upon C doping likely contributes to the improved catalytic properties of the single Co 2+ sites.

14 SOLAR ENERGY↗
DOE OSTI2022

Solving the structure of “single-atom” catalysts using machine learning – assisted XANES analysis

We show that "single-atom” catalysts (SACs) have demonstrated excellent activity and selectivity in challenging chemical transformations such as photocatalytic CO 2 reduction. For heterogeneous photocatalytic SAC systems, it is essential to obtain sufficient information of their structure at the atomic level in order to understand reaction mechanisms. In this work, a SAC was prepared by grafting a molecular cobalt catalyst on a light-absorbing carbon nitride surface. Due to the sensitivity of the X-ray absorption near edge structure (XANES) spectra to subtle variances in the Co SAC structure in reaction conditions, different machine learning (ML) methods, including principal component analysis, K-means clustering, and neural network (NN), were utilized for in situ Co XANES data analysis. As a result, we obtained quantitative structural information of the SAC nearest atomic environment thereby extending the NN-XANES approach previously demonstrated for nanoparticles and size-selective clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of Carbon Doping on CO 2 –Reduction Activity of Single Cobalt Sites in Graphitic Carbon Nitride

Single atom catalysts have demonstrated interesting activity in a variety of applications. In this study, we prepared single C o2+ sites on graphitic carbon nitride (C 3 N 4 ), which was doped with carbon for enhanced activity in visible-light CO 2 reduction. The synthesized materials were characterized with a variety of techniques, including microscopy, X-ray powder diffraction, UV-vis spectroscopy, infrared spectroscopy, photoluminescence spectroscopy, and X-ray absorption spectroscopy. Here, doping C 3 N 4 with carbon was found to have profound effect on the photocatalytic activity of the single Co 2+ sites. At relatively low levels, carbon doping enhanced the photoresponse of C 3 N 4 in the visible region and improved charge separation upon photoactivation, thereby enhancing the photocatalytic activity. Furthermore, high levels of carbon doping were found to be detrimental to the photocatalytic activity of the single Co 2+ sites by altering the structure of C 3 N 4 and generating defect sites responsible for charge recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗