Search NASA⌕ Search

Engineering topics

Li, Lesheng

Publications and source records attributed to Li, Lesheng.

Characterizing Structure-Dependent TiS 2 /Water Interfaces Using Deep-Neural-Network-Assisted Molecular Dynamics

As a promising layered electrode material, TiS 2 -based capacitive deionization (CDI) devices for water desalination have attracted significant attention. However, TiS 2 /H 2 O interfacial features, potentially important for device optimization, remain unidentified. Using Deep Potential Molecular Dynamics (DPMD), we characterized distinct aqueous interfaces introduced by four TiS 2 terminations expected to be present as water intercalates into TiS 2 , namely, Armchair, Zigzag, Zigzag-L, and Zigzag-R. First, we assessed important representative physical properties of the system to validate the deep potentials (DPs). DPMD simulations agree well with experiments and first-principles simulations, suggesting the DPs are accurate and reliable. Subsequent simulations of these TiS 2 /water interfaces revealed how TiS 2 surface termination influences the structure of interfacial water. This effect is most evident in the first and second water layers close to the TiS 2 surface, and more pronounced when spontaneous dissociative adsorption of water occurs. The extent of water dissociation on each surface was evaluated using enhanced sampling. Zigzag-L is the only interface where proton transfer from adsorbed water to TiS 2 surface S atoms is thermodynamically and kinetically favored. The coexistence of surface four-fold-coordinated Ti (Ti 4c ) and one-fold-coordinated S (S 1c ) is found to be essential to making proton transfer feasible on the Zigzag-L surface. Furthermore, remaining unprotonated S 1c atoms can act as good proton acceptors after water dissociation. Thus, TiS 2 with Zigzag-L termination may be a surface to avoid in CDI device construction, given that pH fluctuations adversely affect performance. Furthermore, this work provides new understanding of TiS 2 /H 2 O interfacial features that could aid future design and optimization of TiS 2 -based CDI devices for water desalination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗

Prediction of Highly Selective Electrocatalytic Nitrogen Reduction at Low Overpotential on a Mo-Doped g-GaN Monolayer

Identifying efficient electrocatalysts with low overpotential and high selectivity for producing ammonia from nitrogen gas is essential for any future electrocatalytic nitrogen reduction reaction (NRR)-based ammonia synthesis. Via density functional theory calculations and the computational hydrogen electrode model, we systematically examine the prospect of using a single-transition-metal (TM)-atom-doped graphene-like GaN (g-GaN) monolayer as an electrocatalyst for artificial nitrogen reduction. Among 15 TMs investigated, the Mo-doped g-GaN (Mo@g-GaN) monolayer is the only electrocatalyst predicted to be feasible for the NRR. The Mo@g-GaN monolayer satisfies all screening criteria considered for activating the inert N≡N triple bond effectively, including stabilization of the adsorbed (*) NRR intermediate *NNH and destabilization of the *NH 2 species. This monolayer also possesses sufficient overall stability. A complete analysis of the likely mechanisms involved in the NRR on this catalyst suggests that the Mo@g-GaN monolayer could exhibit promising NRR catalytic activity. It achieves this via one specific (distal) pathway, which has a very low onset potential of –0.33 V vs the reversible hydrogen electrode (RHE), corresponding to a low overpotential of 0.42 V vs the RHE, defined using the measured equilibrium potential for NRR of 0.09 V vs the RHE. The potential-determining step, conversion of *NH 2 to *NH 3 , also exhibits a surmountable barrier of 0.42 eV, suggesting kinetics will be facile. Finally, the Mo@g-GaN monolayer is predicted to exhibit substantial selectivity (~31%) toward ammonia synthesis over the competing hydrogen evolution reaction. The finding presented in this work may open a potential route for artificial ammonia synthesis using a single-atom catalyst under ambient conditions.

25 ENERGY STORAGE↗

Defect-Mediated Charge-Carrier Trapping and Nonradiative Recombination in WSe 2 Monolayers

Nonradiative charge-carrier recombination in transition-metal dichalcogenide (TMD) monolayers severely limits their use in solar energy conversion technologies. Because defects serve as recombination sites, developing a quantitative description of charge-carrier dynamics in defective TMD monolayers can shed light on recombination mechanisms. Herein we report a first-principles investigation of charge-carrier dynamics in pristine and defective WSe 2 monolayers with three of the most probable defects, namely, Se vacancies, W vacancies, and SeW antisites. We predict that Se vacancies slow down recombination by nearly an order of magnitude relative to defect-free samples by breaking the monolayer’s symmetry and thereby reducing the spectral intensity of the A 1g phonon mode that promotes recombination in the pristine monolayer. By contrast, we find W vacancies accelerate recombination by more than an order of magnitude, with half of the recombination events bypassing charge traps. The subsequent dynamics feature both charge trapping and charge-trap-assisted recombination. Although SeW antisites also slightly accelerate recombination, the predicted mechanism is different from the W vacancy case. First, a shallow energy level traps a photoexcited electron. Then, both shallow- and deep-trap-assisted recombination can occur simultaneously. Accelerated recombination arises for W vacancies and SeW antisites because they introduce new phonon modes that strongly couple to electron and hole dynamics. This work thus provides a detailed understanding of the mechanisms behind charge-carrier recombination in WSe 2 monolayers with distinct defects. Furthermore, materials engineering, particularly to avoid W vacancies, could advance this technology. The insights derived are important for future design of high-performance photoactive devices based on WSe 2 monolayers.

14 SOLAR ENERGY↗

Modeling Electron Injection at Semiconductor–Molecule Interfaces using First-Principles Dynamics Simulation: Effects of Nonadiabatic Coupling, Self-energy, and Surface Models

Excited electron transfer across semiconductor–molecule heterogeneous interfaces is central to various future electronic and optoelectronic devices. At the same time, first-principles modeling of such dynamical processes remains as a great challenge in theoretical chemistry and condensed matter physics for developing better understanding at the molecular scale. Excited electron transfer from a molecule to semiconductor surface is a particularly difficult case to model accurately, because the initial state of such an electron injection process often lies deep within the dense manifold of the conduction band states in the semiconductor. Nonadiabatic couplings and energy level alignments at such interfaces as well as the finite size error of the surface model all play important roles in numerical modeling of electron injection via first-principles theory. Here, using representative interfaces between a well-defined hydrogen-terminated Si(111) surface and series of covalently adsorbed conjugated molecules, we investigate the extent to which these theoretical and numerical considerations influence the description of electron injection at the semiconductor–molecule interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size Dependence and Role of Decoherence in Hot Electron Relaxation within Fluorinated Silicon Quantum Dots: A First-Principles Study

Reeves et al. in their recent work on small silicon quantum dots found that surface passivation with fluorine atoms results in a significant slow down of hot electron relaxation because there exist particular electronic states that retain the hot electron for an extended time, and the relaxation time scale is largely influenced by shuttling of the hot electron between energetically adjacent states by such unique electronic states. In this work, we investigate how the quantum dot size changes this observation associated with the fluorine passivation and also consider the effect of decoherence. With the larger size of silicon quantum dot, the distinct hot electron shuttling behavior is no longer observed, and the relaxation time constant is much shorter. At the same time, decoherence can significantly slow down the hot electron relaxation by a factor of two or more. Lastly, our study reveals that slow hot electron relaxation can result from the quantum Zeno effect, in addition to the surface-specific vibronic effect for small quantum dots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Examining the Effect of Exchange-Correlation Approximations in First-Principles Dynamics Simulation of Interfacial Charge Transfer

We examine the extent to which the exchange-correlation (XC) approximation influences modeling interfacial charge transfer using fewest-switches surface hopping (FSSH) simulations within the single-particle description. A heterogeneous interface between a lithium ion and an extended boron-nitride sheet was considered here, being an extreme case in which wave function localization and energy level alignments are highly sensitive to the XC approximation. The PBE0 hybrid XC approximation yields nonadiabatic couplings (NACs) that are significantly smaller than the values obtained from the PBE-GGA approximation by an order of magnitude for localized electronic states. This difference between the two XC functionals for the calculated NACs was found to derive mainly from the wave function characteristics rather than from the lattice movement although first-principles molecular dynamics trajectories, along which NACs are obtained, differ noticeably between the two XC functionals. Using the NACs and single-particle energy level alignments at different levels of theory, FSSH simulations were performed to model the electron transfer dynamics at the interface. Here, the electron transfer time scale was found to vary as much as, but not more than, 1 order of magnitude. The time scale was found to be quite sensitive to both NACs and energy level alignments. While the order of magnitude consistency for the charge transfer rate is encouraging even for this rather extreme model of heterojunction interface, continued advancement in electronic structure methods is required for quantitatively accurate determination of the transfer rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Passivation of Nickel Vacancy Defects in Nickel Oxide Solar Cells by Targeted Atomic Deposition of Boron

Localized trap states, which are deleterious to the performance of many solar-energy materials, often originate from the under-coordinated bonding associated with defects. Recently, the concept of targeted atomic deposition (TAD) was introduced as a process that permits the passivation of trap states using a vapor-phase precursor that selectively reacts with only the surface defect sites. In this work, we demonstrate the passivation of nickel oxide (NiO) with the TAD process using diborane gas for selective, low-temperature deposition of boron (B) under continuous flow in a chemical vapor deposition (CVD) system. NiO is a ubiquitous cathode material used in dye-sensitized solar cells (DSSCs), organic photovoltaic devices, and organo-lead halide perovskite solar cells. The deposition of B at 100 °C is shown to follow first-order kinetics, exhibiting saturation at a B to Ni atomic ratio of ~10%. Electrochemical measurements, combined with first-principles calculations, indicate that B passivates Ni vacancy defects by partially saturating the bonding of the oxygen atoms adjacent to the vacancy. p-Type DSSCs were fabricated using TAD-treated NiO and show a modest improvement in photovoltaic performance metrics. The results highlight the potential ubiquity of TAD passivation with a range of atomic precursors and vapor-phase processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excited Electron Dynamics at Semiconductor–Molecule Type-II Heterojunction Interface: First-Principles Dynamics Simulation

Excited electron dynamics at semiconductor–molecule interfaces is ubiquitous in various energy conversion technologies. However, a quantitative understanding of how molecular details influence the quantum dynamics of excited electrons remains a great scientific challenge because of the complex interplay of different processes with various time scales. Here in this paper, we employ first-principles electron dynamics simulations to investigate how molecular features govern the dynamics in a representative interface between the hydrogen-terminated Si(111) surface and a cyanidin molecule. Hot electron transfer to the chemisorbed molecule was observed but was short-lived on the molecule. Interfacial electron transfer to the chemisorbed molecule was found to be largely decoupled from hot electron relaxation within the semiconductor surface. While the hot electron relaxation was found to take place on a time scale of several hundred femtoseconds, the subsequent interfacial electron transfer was slower by an order of magnitude. Finally, at the same time, this secondary process of picosecond electron transfer is comparable in time scale to typical electron trapping into defect states in the energy gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antiferromagnetic structures and electronic energy levels at reconstructed NiO(111) surfaces: A DFT + U study

In this work, we studied how the surface reconstruction and passivation influence the antiferromagnetic and electronic structures of NiO(111) surface using first-principles electronic structure calculations. These features lead to a surprisingly wide variety of different surface electronic structures, and some surfaces are even metallic. Different reconstructions and surface passivation were also found to qualitatively alter the charge-transfer band gap type of bulk NiO. At the same time, the antiferromagnetic character of bulk NiO in the 111 direction is retained even near the surface, and the magnetic moment quickly converges to the bulk value within a few surface layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling time-coincident ultrafast electron transfer and solvation processes at molecule-semiconductor interfaces

Kinetic models based on Fermi's Golden Rule are commonly employed to understand photoinduced electron transfer dynamics at molecule-semiconductor interfaces. Implicit in such second-order perturbative descriptions is the assumption that nuclear relaxation of the photoexcited electron donor is fast compared to electron injection into the semiconductor. This approximation breaks down in systems where electron transfer transitions occur on 100-fs time scale. Here, we present a fourth-order perturbative model that captures the interplay between time-coincident electron transfer and nuclear relaxation processes initiated by light absorption. The model consists of a fairly small number of parameters, which can be derived from standard spectroscopic measurements (e.g., linear absorbance, fluorescence) and/or first-principles electronic structure calculations. Insights provided by the model are illustrated for a two-level donor molecule coupled to both (i) a single acceptor level and (ii) a density of states (DOS) calculated for TiO{sub 2} using a first-principles electronic structure theory. These numerical calculations show that second-order kinetic theories fail to capture basic physical effects when the DOS exhibits narrow maxima near the energy of the molecular excited state. Overall, we conclude that the present fourth-order rate formula constitutes a rigorous and intuitive framework for understanding photoinduced electron transfer dynamics that occur on the 100-fs time scale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗