Single-crystal elasticity of phase Egg AlSiO3OH and [delta]-AlOOH by Brillouin spectroscopy
Explore the source record for details and available documents.
Wang, Baoyun↗
Engineering topics
Li, Li
Publications and source records attributed to Li, Li.
Correction: Chen et al. Genome-Wide Analysis of Terpene Synthase Gene Family in Mentha longifolia and Catalytic Activity Analysis of a Single Terpene Synthase. Genes 2021, 12, 518
The authors have requested that the authors list be updated to include additional coauthors.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
First-Principles Approach to Extracting Chemical Information from X-ray Absorption Near-Edge Spectra of Ga-Containing Materials
The X-ray absorption near-edge structure (XANES) can provide uniquely detailed information on the coordination environments of important Ga-containing materials with unknown structures, including catalytically active materials. In this work, the Ga K-edge XANES was simulated using first-principles-based methods for seven molecular Ga complexes as well β-Ga 2 O 3 , in order to explore the chemical origins of the experimentally observed features. The theoretical spectra were computed using FEFF, CASTEP, and StoBe, to assess the sensitivity of the results to the computational approach. While the XANES features depend on the Ga coordination environment, they are also sensitive to the electronegativity of the ligands and the symmetry at Ga. The white line position responds to changes in both the core state (due to differential screening) and the valence “p” states (arising from differences in ligand coordination).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Competitive and cooperative electronic states in Ba(Fe1−xTx)2As2 with T = Co, Ni, Cr
Abstract The electronic inhomogeneities in Co, Ni, and Cr doped BaFe 2 As 2 single crystals are compared within three bulk property regions: a pure superconducting (SC) dome region, a coexisting SC and antiferromagnetic (AFM) region, and a non-SC region. Machine learning is utilized to categorize the inhomogeneous electronic states: in-gap, L-shape, and S-shape states. Although the relative percentages of the states vary in the three samples, the total volume fraction of the three electronic states is quite similar. This is coincident with the number of electrons (Ni 0.04 and Co 0.08 ) and holes (Cr 0.04 ) doped into the compounds. The in-gap state is confirmed as a magnetic impurity state from the Co or Ni dopants, the L-shape state is identified as a spin density wave which competes with the SC phase, and the S-shape state is found to be another form of magnetic order which constructively cooperates with the SC phase, rather than competing with it.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Mini‐synplastomes for plastid genetic engineering
Summary In the age of synthetic biology, plastid engineering requires a nimble platform to introduce novel synthetic circuits in plants. While effective for integrating relatively small constructs into the plastome, plastid engineering via homologous recombination of transgenes is over 30 years old. Here we show the design–build–test of a novel synthetic genome structure that does not disturb the native plastome: the ‘mini‐synplastome’. The mini‐synplastome was inspired by dinoflagellate plastome organization, which is comprised of numerous minicircles residing in the plastid instead of a single organellar genome molecule. The first mini‐synplastome in plants was developed in vitro to meet the following criteria: (i) episomal replication in plastids; (ii) facile cloning; (iii) predictable transgene expression in plastids; (iv) non‐integration of vector sequences into the endogenous plastome; and (v) autonomous persistence in the plant over generations in the absence of exogenous selection pressure. Mini‐synplastomes are anticipated to revolutionize chloroplast biotechnology, enable facile marker‐free plastid engineering, and provide an unparalleled platform for one‐step metabolic engineering in plants.
Occhialini, Alessandro↗
Resistive wall mode stability and resonant field amplification in MAST high beta plasma
The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
High glucose activates ERK1/2 to stabilize AP1 and increase MMP9 expression in diabetic foot ulcers
Increased matrix metalloproteinase 9 (MMP9) expression is involved in delayed wound healing in diabetic foot ulcers. We created skin wounds in normal SD rats and STZ-induced diabetic SD rats, then we found protein levels of activator protein-1 (AP1), a crucial transcription factor to increase MMP9 transcription, as well as MMP9 was up-regulated in epithelium of diabetic skin tissues. Then, we evaluated the mRNA and protein stability of AP1 subunits C-FOS/C-Jun in HaCaT cells after high glucose treatment. Results showed that high glucose could increase protein stability of C-FOS and C-Jun. Additionally, high glucose also activated extracellular signaling-related kinase 1/2 (ERK1/2). ERK1/2 inhibitor could rescue phosphorylation of C-FOS and C-Jun, increased protein stability of C-Jun, and increased MMP9 expressions. Thus, our study demonstrated that high glucose could activate ERK1/2 to stabilize AP1 and increase MMP9 expression in diabetic skin and HaCaT cells.
60 APPLIED LIFE SCIENCES↗
Numerical investigation of active control of tearing mode by magnetic coils and the role of Δ'
Magnetic feedback stabilization of the tearing mode (TM) is numerically investigated, utilizing the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681) for toroidal tokamak equilibria. With control coil configurations assumed in this study, magnetic feedback partially or fully stabilizes the TM, with either vanishing or finite equilibrium pressure. The best control is achieved by the combination of internal active coils and internal poloidal sensors. The internal and external tearing indices are evaluated for the close-loop system, based on the MARS-F computed mode eigenvalue and eigenfunction, respectively. In the absence of the favorable curvature effect, these two indices are real-valued and quantitatively agree well with each other. For the equilibrium with finite pressure gradient at the mode rational surface, the favorable average curvature effect becomes important and the close-loop tearing index also becomes complex-valued, partly due to interaction of the feedback system with the dissipative wall eddy current response. Isolating the inner layer and outer region response to magnetic feedback, with either proportional or proportional-derivative actions, allows to establish that feedback stabilization of the TM occurs mainly due to modification of the behavior of the external ideal solution, further confirming the analytic result reported in He et al 2021 Phys. Plasmas 28 012504.
Physics↗
Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements
Particle charging in the afterglows of non-thermal plasmas typically take place in a non-neutral space charge environment. We model the same by incorporating particle-ion collision rate constant models, developed in prior work by analyzing particle-ion trajectories calculated using Langevin Dynamics simulations, into species transport equations for ions, electrons and charged particles in the afterglow. A scaling analysis of particle charging and additional Langevin Dynamics calculations of the particle-ion collision rate constant are presented to extend the range of applicability to ion electrostatic to thermal energy ratios of 300 and diffusive Knudsen number (that scales inversely with gas pressure) up to 2000. The developed collision rate constant models are first validated by comparing predictions of particle charge against measured values in a stationary, non-thermal DC plasma from past PK-4 campaigns published in Phys. Rev. Lett. 93(8): 085001 and Phys. Rev. E 72(1): 016406). The comparisons reveal excellent agreement within ±35% for particles of radius 0.6,1.0,1.3 μm in the gas pressure range of ~20-150 Pa. The experiments to probe particle charge distributions by Sharma et al. (J. Physics D: Appl. Phys. 53(24): 245204) are modeled using the validated particle-ion collision rate constant models and the calculated charge fractions are compared with measurements. The comparisons reveal that the ion/electron concentration and gas temperature in the afterglow critically influence the particle charge and the predictions are generally in qualitative agreement with the measurements. Along with critical assessment of the modeling assumptions, several recommendations are presented for future experimental design to probe charging in afterglows.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Influence of up-down asymmetry in plasma shape on RMP response
Shaping effect on the plasma response to the externally applied resonant magnetic perturbation field is investigated for both DIII-D and MAST experiments, utilizing toroidal modeling. The plasma boundary shape is systematically varied ranging from single-null (SN) to double-null (DN) configurations, while other equilibrium quantities are kept largely unchanged. The relative amplitude of the computed plasma surface displacement, between the top/bottom of the torus and the outboard mid-plane, is identified as the most reliable indicator that distinguishes the plasma response between the SN and DN configurations. Here, the underlying physics is the weakening of the edge-peeling component in the plasma response with increasing up-down symmetry of the plasma boundary shape.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
An AI-Enabled MODEX Framework for Improving Predictability of Subsurface Water Storage across Local and Continental Scales
Focal Area: (2) Predictive modeling through the use of AI techniques and AI-derived model components. (3) Insight gleaned from complex data using AI, big data analytics, and other advanced methods. We propose an AI-enabled model-experiment (MODEX) framework to improve the predictability of subsurface water storage (SWS) from local to conus scales in a changing environment by taking advantage of DOE’s observation and simulation capabilities, as well as to inform the model and the observation development.
54 ENVIRONMENTAL SCIENCES↗
Deep Learning for Hydro-Biogeochemistry Processes
Focal Area(s): The white paper focuses on areas 2 and 3. The proposed deep learning modeling approach can provide forecasting capabilities and mechanism-based understanding of terrestrial and aquatic hydro- biogeochemical processes at watershed and river basin scales. Knowledge gleaned here can also provide insights for Earth System Models.
54 ENVIRONMENTAL SCIENCES↗
Dielectric polymers for high-temperature capacitive energy storage
Polymers are the preferred materials for dielectrics in high-energy-density capacitors. The electrification of transport and growing demand for advanced electronics require polymer dielectrics capable of operating efficiently at high temperatures. In this review, we critically analyze the most recent development in the dielectric polymers for high-temperature capacitive energy storage applications. While general design considerations are discussed, emphasis is placed on the elucidation of the structural dependence of the high-field dielectric and electrical properties and the capacitive performance, including discharged energy density, charge–discharge efficiency and cyclability, of dielectric polymers at high temperatures. Here, advantages and limitations of current approaches to high-temperature dielectric polymers are summarized. Challenges along with future research opportunities are highlighted at the end of this article.
25 ENERGY STORAGE↗
Genome-Wide Analysis of Terpene Synthase Gene Family in Mentha longifolia and Catalytic Activity Analysis of a Single Terpene Synthase
Terpenoids are a wide variety of natural products and terpene synthase (TPS) plays a key role in the biosynthesis of terpenoids. Mentha plants are rich in essential oils, whose main components are terpenoids, and their biosynthetic pathways have been basically elucidated. However, there is a lack of systematic identification and study of TPS in Mentha plants. In this work, we genome-widely identified and analyzed the TPS gene family in Mentha longifolia, a model plant for functional genomic research in the genus Mentha. A total of 63 TPS genes were identified in the M. longifolia genome sequence assembly, which could be divided into six subfamilies. The TPS-b subfamily had the largest number of genes, which might be related to the abundant monoterpenoids in Mentha plants. The TPS-e subfamily had 18 members and showed a significant species-specific expansion compared with other sequenced Lamiaceae plant species. The 63 TPS genes could be mapped to nine scaffolds of the M. longifolia genome sequence assembly and the distribution of these genes is uneven. Tandem duplicates and fragment duplicates contributed greatly to the increase in the number of TPS genes in M. longifolia. The conserved motifs (RR(X)8W, NSE/DTE, RXR, and DDXXD) were analyzed in M. longifolia TPSs, and significant differentiation was found between different subfamilies. Adaptive evolution analysis showed that M. longifolia TPSs were subjected to purifying selection after the species-specific expansion, and some amino acid residues under positive selection were identified. Furthermore, we also cloned and analyzed the catalytic activity of a single terpene synthase, MlongTPS29, which belongs to the TPS-b subfamily. MlongTPS29 could encode a limonene synthase and catalyze the biosynthesis of limonene, an important precursor of essential oils from the genus Mentha. This study provides useful information for the biosynthesis of terpenoids in the genus Mentha.
59 BASIC BIOLOGICAL SCIENCES↗
Low frequency bulk modulus of partially molten peridotite, KLB-1
Explore the source record for details and available documents.
Weidner, Donald J.↗
Retrieval of Aerosol Microphysical Properties from AERONET Photo-Polarimetric Measurements. 2: A New Research Algorithm and Case Demonstration
A new research algorithm is presented here as the second part of a two-part study to retrieve aerosol microphysical properties from the multispectral and multiangular photopolarimetric measurements taken by Aerosol Robotic Network's (AERONET's) new-generation Sun photometer. The algorithm uses an advanced UNified and Linearized Vector Radiative Transfer Model and incorporates a statistical optimization approach.While the new algorithmhas heritage from AERONET operational inversion algorithm in constraining a priori and retrieval smoothness, it has two new features. First, the new algorithmretrieves the effective radius, effective variance, and total volume of aerosols associated with a continuous bimodal particle size distribution (PSD) function, while the AERONET operational algorithm retrieves aerosol volume over 22 size bins. Second, our algorithm retrieves complex refractive indices for both fine and coarsemodes,while the AERONET operational algorithm assumes a size-independent aerosol refractive index. Mode-resolved refractive indices can improve the estimate of the single-scattering albedo (SSA) for each aerosol mode and thus facilitate the validation of satellite products and chemistry transport models. We applied the algorithm to a suite of real cases over Beijing_RADI site and found that our retrievals are overall consistent with AERONET operational inversions but can offer mode-resolved refractive index and SSA with acceptable accuracy for the aerosol composed by spherical particles. Along with the retrieval using both radiance and polarization, we also performed radiance-only retrieval to demonstrate the improvements by adding polarization in the inversion. Contrast analysis indicates that with polarization, retrieval error can be reduced by over 50% in PSD parameters, 10-30% in the refractive index, and 10-40% in SSA, which is consistent with theoretical analysis presented in the companion paper of this two-part study.
aerosol retrieval algorithm↗
Electromagnetic Nondestructive Evaluation of Wire Insulation and Models of Insulation Material Properties
Polymers have been widely used as wiring electrical insulation materials in space/air-craft. The dielectric properties of insulation polymers can change over time, however, due to various aging processes such as exposure to heat, humidity and mechanical stress. Therefore, the study of polymers used in electrical insulation of wiring is important to the aerospace industry due to potential loss of life and aircraft in the event of an electrical fire caused by breakdown of wiring insulation. Part of this research is focused on studying the mechanisms of various environmental aging process of the polymers used in electrical wiring insulation and the ways in which their dielectric properties change as the material is subject to the aging processes. The other part of the project is to determine the feasibility of a new capacitive nondestructive testing method to indicate degradation in the wiring insulation, by measuring its permittivity.
Bowler, Nicola↗