Search NASA⌕ Search

Engineering topics

Li, Meng

Publications and source records attributed to Li, Meng.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Oxide nucleation via threshold-driven volume instability in Ni oxidation

Oxide nucleation dictates the onset of metal oxidation, yet the atomistic pathways bridging initial oxygen adsorption to bulk phase transformation remain elusive. Here, we utilize in-situ atomic-resolution imaging to directly capture the nucleation of nickel oxide, revealing a threshold-driven, cooperative transformation of Ni into NiO. Our observations identify a distinct incubation period during which oxygen progressively accumulates in subsurface layers. Once a critical concentration and penetration depth are reached, a collective lattice reconfiguration is triggered, abruptly converting multiple Ni layers into NiO. Atomistic simulations corroborate this mechanism, identifying a cooperative lattice instability induced by subsurface oxygen saturation. These results establish subsurface oxygen incorporation as the missing mechanistic link between surface adsorption and three-dimensional oxide formation, providing an atomistic framework to understand and control reactive phase transformations in materials synthesis, catalysis, and degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Gas-phase activation of holmium tetranitrato complexes likely leads to formation of hydroxylated species through the loss of nitric acid, not water splitting

It has been observed that water can react with activated gas-phase lanthanide tetranitrato complexes ([Ln(NO3)4]-) to form a hydroxylated species. These reactions, which are proposed to involve water splitting, are observed for most -- but not all -- of the lanthanides. Thus, study of this system could yield insight into how small changes in electronic structure (through variation of the lanthanide species) influences water-splitting reactions, help guide development of new materials used to convert water to hydrogen using electricity. The mechanism proposed in the literature is: (Step 1) [Ln(NO3)4]- ? [LnO(NO3)3]- + ?NO2 (Step 2) [LnO(NO3)3]- + H2O ? [LnOH(NO3)3]- + ?OH The purpose of this study is to determine if the reaction mechanism really does involve splitting of water or proceeds through an alternative pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing Nitrogen Activation in Electrochemical Reduction: The Role of Rare Earth Oxide Surface Configurations

The pursuit of sustainable ammonia synthesis has prompted the exploration of ambient electrochemical nitrogen reduction reaction (e-NRR) as an alternative to the energy-intensive Haber-Bosch process. Here, this study conducted a theoretical investigation into the use of rare earth oxide materials, specifically dysprosium oxide (Dy 2 O 3 ), as potential electrocatalysts for NRR. Utilizing spin-polarized density functional theory calculations, we explored the interaction between Dy 2 O 3 surfaces and nitrogen (N 2 ) molecules, examining the capability of Dy 2 O 3 to adsorb and activate N 2 under ambient conditions. The results indicate that Dy 2 O 3 surfaces exhibit diverse configurations and bonding environments, providing a variety of reactive sites that display different behaviors in N 2 adsorption and activation. The distinctive electronic structure and surface chemistry of a particular Dy 2 O 3 surface configuration were found to significantly enhance the activation of N 2 by promoting charge transfer, which facilitates the NRR process. This research provides deep insights into the mechanistic pathways of N 2 reduction over Dy 2 O 3 , highlighting the surface properties as pivotal in catalysis. These theoretical insights serve as a foundation for the development of novel rare earth-based electrocatalytic materials for efficient ambient e-NRR, potentially transforming ammonia production into a greener and more energy-efficient process.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Comparison of the Effect of 2 at. % Additions of Nb and Ta on the 1100 °C Oxidation Behavior of Ni-6Al-(4,6,8) Cr Model Alloys

To continue improving alloy performance in harsh service environments, the development of alumina-forming nickel-based superalloys is essential. Current generations of these alloys heavily rely on the addition of refractory elements to enhance their mechanical properties at high temperatures; however, a systematic understanding of how such additions affect the overall oxidation behavior is still not well established, particularly from the standpoint of predicting the transition from internal to external alumina formation. The present work seeks to better understand the intrinsic effects that common minor additions of Ta and Nb have on the oxidation behavior of alumina-scale-forming γ-Ni model alloys. By combining a novel simulation approach with high-temperature oxidation experiments and advanced characterization techniques, the present study provides insightful details on the differing effects that 2 at. % addition of Ta and Nb have on the alumina scale formation of Ni-based alloys during 1100 °C oxidation.

Rodriguez, Rafael↗
DOE OSTI2024

Temperature Dependent Early-Stage Oxidation Dynamics of Cu(100) Film with Faceted Holes

Fundamental understanding of surface oxidation dynamics is critical for rational corrosion protection and advanced manufacturing of nanostructured oxides. In situ environmental TEM (ETEM) provides high spatial (nano- to atomic- scale) and temporal (< 0.1 s) resolution to investigate the early-stage oxidation/corrosion dynamics of metals and alloys. Thin samples with facets are widely used to enable cross-sectional observation of the oxidation dynamics in ETEM. However, how different facet orientations oxidize under the same conditions, and how these facets change the oxidation process, has not been investigated before. Here, using in situ ETEM, we systematically compare the oxidation dynamics of Cu(001) thin films, with faceted holes exposing {100} and {110} facets at temperatures ranging from 250–600 °C under 0.03 Pa O 2 . Oxidation preference is observed to change, from Cu(110) facets at lower temperatures to Cu(100) facets at ~ 500 °C. Oxide growth mechanisms change from outward growth on Cu 2 O surfaces at low temperatures, to inward growth on Cu-Cu 2 O interfaces at high temperatures. At high temperatures (500–600 °C), a rod-like Cu 2 O morphology is observed, with side facets of ~ {024} and top facets of {100} on Cu(100). This differs from the square-shaped Cu 2 O exposing {110} facets formed on Cu(001) surfaces. Rod-like oxides exhibit directional growth along their lengths with linear growth rates, regardless of rod length and width. This suggests that O from Cu(001) surfaces, rather than Cu(100) facets, serves as an O source for oxide growth. These results show a direct comparison of oxidation at different orientations with temperature, underscoring the temperature dependence of oxidation preference. Our results also suggest future in situ ETEM experiments viewing oxidation corrosion cross-sectionally should be cautious when oxide size is comparable with sample thickness, as the oxidizing mechanism may change due to sample thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ubiquitous short-range order in multi-principal element alloys

Recent research in multi-principal element alloys (MPEAs) has increasingly focused on the role of short-range order (SRO) on material performance. However, the mechanisms of SRO formation and its precise control remain elusive, limiting the progress of SRO engineering. Here, leveraging advanced additive manufacturing techniques that produce samples with a wide range of cooling rates (up to 10 7 K s –1 ) and an enhanced semi-quantitative electron microscopy method, we characterize SRO in three CoCrNi-based face-centered-cubic (FCC) MPEAs. Surprisingly, irrespective of the processing and thermal treatment history, all samples exhibit similar levels of SRO. Atomistic simulations reveal that during solidification, prevalent local chemical order arises in the liquid-solid interface (solidification front) even under the extreme cooling rate of 10 11 K s –1 . This phenomenon stems from the swift atomic diffusion in the supercooled liquid, which matches or even surpasses the rate of solidification. Therefore, SRO is an inherent characteristic of most FCC MPEAs, insensitive to variations in cooling rates and even annealing treatments typically available in experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2024

eReaxFF force field development for BaZr 0.8 Y 0.2 O 3-δ solid oxide electrolysis cells applications

The use of solid-oxide materials in electrocatalysis applications, especially in hydrogen-evolution reactions, is promising. However, further improvements are warranted to overcome the fundamental bottlenecks to enhancing the performance of solid-oxide electrolysis cells (SOECs), which is directly linked to the more-refined fundamental understanding of complex physical and chemical phenomena and mass exchanges that take place at the surfaces and in the bulk of electrocatalysis materials. Here, we developed an eReaxFF force field for barium zirconate doped with 20 mol% of yttrium, BaZr 0.8 Y 0.2 O 3-δ (BZY20) to enable a systematic, large-length-scale, and longer-timescale atomistic simulation of solid-oxide electrocatalysis for hydrogen generation. All parameters for the eReaxFF were optimized to reproduce quantum-mechanical (QM) calculations on relevant condensed phase and cluster systems describing oxygen vacancies, vacancy migrations, electron localization, water adsorption, water splitting, and hydrogen generation on the surfaces of the BZY20 solid oxide. Using the developed force field, we performed both zero-voltage (excess electrons absent) and non-zero-voltage (excess electrons present) molecular dynamics simulations to observe water adsorption, water splitting, proton migration, oxygen-vacancy migrations, and eventual hydrogen-production reactions. Based on investigations offered in the present study, we conclude that the eReaxFF force field-based approach can enable computationally efficient simulations for electron conductivity, electron leakage, and other non-zero-voltage effects on the solid oxide materials using the explicit-electron concept. Moreover, we demonstrate how the eReaxFF force field-based atomistic-simulation approach can enhance our understanding of processes in SOEC applications and potentially other renewable-energy applications.

08 HYDROGEN↗
DOE OSTI2024

MIXv2: a long-term mosaic emission inventory for Asia (2010–2017)

The MIXv2 Asian emission inventory is developed under the framework of the Model Inter-Comparison Study for Asia (MICS-Asia) Phase IV and produced from a mosaic of up-to-date regional emission inventories. We estimated the emissions for anthropogenic and biomass burning sources covering 23 countries and regions in East, Southeast and South Asia and aggregated emissions to a uniform spatial and temporal resolution for seven sectors: power, industry, residential, transportation, agriculture, open biomass burning and shipping. Compared to MIXv1, we extended the dataset to 2010–2017, included emissions of open biomass burning and shipping, and provided model-ready emissions of SAPRC99, SAPRC07, and CB05. A series of unit-based point source information was incorporated covering power plants in China and India. A consistent speciation framework for non-methane volatile organic compounds (NMVOCs) was applied to develop emissions by three chemical mechanisms. The total Asian emissions for anthropogenic/open biomass sectors in 2017 are estimated as follows: 41.6/1.1 Tg NO x , 33.2/0.1 Tg SO 2 , 258.2/20.6 Tg CO, 61.8/8.2 Tg NMVOC, 28.3/0.3 Tg NH 3 , 24.0/2.6 Tg PM 10 , 16.7/2.0 Tg PM 2.5 , 2.7/0.1 Tg BC (black carbon), 5.3/0.9 Tg OC (organic carbon), and 18.0/0.4 Pg CO 2 . The contributions of India and Southeast Asia were emerging in Asia during 2010–2017, especially for SO 2 , NH 3 and particulate matter. Gridded emissions at a spatial resolution of 0.1° with monthly variations are now publicly available. This updated long-term emission mosaic inventory is ready to facilitate air quality and climate model simulations, as well as policymaking and associated analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Lithium inventory tracking as a non-destructive battery evaluation and monitoring method

Tracking the active lithium (Li) inventory in an electrode shows the true state of a Li battery, akin to a fuel gauge for an engine. However, non-destructive Li inventory tracking is currently unavailable. Here, in this work, we used the theoretical capacity of a transition metal oxide to convert capacity into a Li inventory analysis. The Li inventory in electrodes was tracked reliably to show how battery formulations and test methods affect performance. Contrary to capacity, Li inventory tracking reveals stoichiometric variations near the electrode–electrolyte interface. Verifiable results rationalized differences in measurements, clarifying and reducing interferences from cell formulations and experimental manipulations. By tracing four variables from formation to end-of-life, we characterize electrode and cell performance with a thermodynamic framework. Accurate rationalization of subtle differences in Li inventory utilization promises precise battery engineering, evaluation, failure analysis and risk mitigation. The method could be applicable from cell design optimization and fabrication to battery management, improving battery performance and reliability.

25 ENERGY STORAGE↗
DOE OSTI2024

Novel order-level lineage of ammonia-oxidizing archaea widespread in marine and terrestrial environments

Ammonia-oxidizing archaea (AOA) are among the most ubiquitous and abundant archaea on Earth, widely distributed in marine, terrestrial, and geothermal ecosystems. However, the genomic diversity, biogeography, and evolutionary process of AOA populations in subsurface environments are vastly understudied compared to those in marine and soil systems. Here, we report a novel AOA order Candidatus (Ca.) Nitrosomirales which forms a sister lineage to the thermophilic Ca. Nitrosocaldales. Metagenomic and 16S rRNA gene-read mapping demonstrates the abundant presence of Nitrosomirales AOA in various groundwater environments and their widespread distribution across a range of geothermal, terrestrial, and marine habitats. Terrestrial Nitrosomirales AOA show the genetic capacity of using formate as a source of reductant and using nitrate as an alternative electron acceptor. Nitrosomirales AOA appear to have acquired key metabolic genes and operons from other mesophilic populations via horizontal gene transfer, including genes encoding urease, nitrite reductase, and V-type ATPase. The additional metabolic versatility conferred by acquired functions may have facilitated their radiation into a variety of subsurface, marine, and soil environments. We also provide evidence that each of the four AOA orders spans both marine and terrestrial habitats, which suggests a more complex evolutionary history for major AOA lineages than previously proposed. Together, these findings establish a robust phylogenomic framework of AOA and provide new insights into the ecology and adaptation of this globally abundant functional guild.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Atomic Dynamics of Multi‐Interfacial Migration and Transformations

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H 2 gas, a reaction pathway of CuO → monoclinic m-Cu 4 O 3 → Cu 2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu 2 O/m-Cu 4 O 3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu 4 O 3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu 2 O and m-Cu 4 O 3 , and activate the interfacial transformations. In conclusion, these results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mycorrhizal status and host genotype interact to shape plant nutrition in field grown maize ( Zea mays ssp. mays )

Arbuscular mycorrhizal fungi (AMF) establish symbioses with the major cereal crops, providing plants with increased access to nutrients while enhancing their tolerance to toxic heavy metals. However, not all plant varieties benefit equally from this association. In this study, we used quantitative trait loci (QTL) mapping to evaluate the combined effect of host genotypic variation (G) and AMF across 141 genotypes on the concentration of 20 mineral elements in the leaves and grain of field grown maize (Zea mays spp. mays). Our mapping design included selective incorporation of a castor AMF-incompatibility mutation, allowing estimation of AMF, QTL and QTLxAMF effects by comparison of mycorrhizal and non-mycorrhizal plants. Overall, AMF compatibility was associated with higher concentrations of boron (B), copper (Cu), molybdenum (Mo), phosphorus (P), selenium (Se) and zinc (Zn) and lower concentrations of arsenic (As), iron (Fe), magnesium (Mg), manganese (Mn), potassium (K) and strontium (Sr). In addition to effects on individual elements, pairwise correlation matrices for element concentration differed between mycorrhizal and non-mycorrhizal plants. We mapped 22 element QTLs, including 18 associated with QTLxAMF effects that indicate plant genotype-specific differences in the impact of AMF on the host ionome. Although there is considerable interest in AMF as biofertilizers, it remains challenging to estimate the impact of AMF in the field. Our design illustrates an effective approach for field evaluation of AMF effects. Furthermore, we demonstrate the capacity of the ionome to reveal host genotype-specific variation in the impact of AMF on plant nutrition.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Improving Proton Conductivity by Navigating Proton Trapping in High Scandium-Doped Barium Zirconate Electrolytes

Proton-conducting oxides are used in intermediate-temperature (300 °C < T < 700 °C) applications of fuel cells, electrolyzers, membrane reactors, hydrogen pumps, and sensors. The proton conductivity of doped ABO 3 perovskites is partly dependent on the proton concentration and hence on the level of material hydration. However, how the material hydration ability is affected by differences in doping is not fully understood. Here, we show the prospect of proton trapping and detrapping that influences material hydration and dehydration. The proton-trapping influence is significant for Sc-doped BaZrO 3 compared to Y-doped BaZrO 3 . Here, our work offers a perspective to understand how defect interaction/associations influence the hydration ability of proton-conducting oxides. Furthermore, positron annihilation lifetime spectroscopy was revealed to be a valuable technique for studying the proton-trapping phenomena and the defect chemistry of dense proton conductors. Density functional theory calculations also showed that a high hydration level in Sc-doped BaZrO 3 boosts proton migration. In contrast, the effect of boosting the proton migration due to increased hydration is limited for Y-doped BaZrO 3 . This effect, in turn, might explain the trend of conductivity with dopant concentration in doped BaZrO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Coordination Chemistry as a Universal Strategy for a Controlled Perovskite Crystallization

The most efficient and stable perovskite solar cells (PSCs) are made from complex mixture of precursors, which are practically always dissolved in combinations of the volatile (and toxic) N, N-Dimethylformamide (DMF), and the non-volatile (and green) dimethyl sulfoxide (DMSO) solvents. Typically, to then form a thin film, an extreme oversaturation of the perovskite precursor is initiated to trigger nucleation sites, e.g. by vacuum, an airstream or a so-called antisolvent. Unfortunately, most such oversaturation triggers do not expel the lingering (and highly coordinating) DMSO, which is highly coordinating, from the thin films; this detrimentally affects long-term stability. Here, for the first time, we introduce (the green) dimethyl sulfide (DMS) as a novel nucleation trigger for perovskite films combining, uniquely, high coordination and high vapor pressure. More precisely, DMS coordinates more strongly than all currently used solvents, hence replacing them, including DMSO, effectively during film formation. Crucially, DMS also has among the highest vapor pressures reported in literature, thus effectively leaving the thin film shortly after formation. This gives DMS a universal scope: DMS replaces other solvents by coordinating more strongly and removes itself once the film formation is finished. To demonstrate this novel coordination chemistry approach, we process MAPbI 3 PSCs, typically dissolved in hard-to-remove (and green) DMSO achieving 21.6% efficiency, among the highest reported efficiencies for this system. To confirm the universality of our strategy, we tested DMS for FAPbI 3 as another composition, which showed higher efficiency of 23.5% compared to 20.9% for fabricated device with CB. Finally, this work provides a universal strategy to control perovskite crystallization using coordination chemistry heralding the revival of perovskite compositions with pure DMSO, such as MAPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nanoscale Manipulation of Wrinkle-Pinned Vortices in Iron-Based Superconductors

The controlled manipulation of Abrikosov vortices is essential for both fundamental science and logical applications. However, achieving nanoscale manipulation of vortices while simultaneously measuring the local density of states within them remain challenging. Here, we demonstrate the manipulation of Abrikosov vortices by moving the pinning center, namely one-dimensional wrinkles, on the terminal layers of Fe(Te,Se) and LiFeAs, by utilizing low-temperature scanning tunneling microscopy/spectroscopy (STM/S). The wrinkles trap the Abrikosov vortices induced by the external magnetic field. In some of the wrinkle-pinned vortices, robust zero-bias conductance peaks are observed. We tailor the wrinkle into short pieces and manipulate the wrinkles by using an STM tip. Strikingly, we demonstrate that the pinned vortices move together with these wrinkles even at high magnetic field up to 6 T. Our results provide a universal and effective routine for manipulating wrinkle-pinned vortices and simultaneously measuring the local density of states on the iron-based superconductor surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A mathematical approach to survey electrochemical impedance spectroscopy for aging in lithium-ion batteries

Electrochemical impedance spectroscopy (EIS) is a valuable technique to detect the health status and aging phenomena in lithium-ion batteries (LiB). Equivalent circuit modeling (ECM) is conventionally used when interpreting EIS data and gaining physical insights into the aging mechanisms. However, performing ECM is resource intensive and expert-level of knowledge is usually required to select suitable models and fitting parameters. This article presents a quick and user-friendly data analysis algorithm as an alternative to ECM by mathematically fitting geometric features in Nyquist plots and obtaining the growth trends of the features. The evolving trends in the Nyquist plots, such as chord lengths of the arcs and interception points, are consistent with the growth of resistance components obtained using ECM with R 2 values from 0.67 to 0.99, and therefore can be used as indicators of battery aging. Our results show that the quick-fitting approach is suitable for analyzing a series of EIS data acquired during battery cycling and identifying the underlying aging mechanisms.

Chen, Bor-Rong↗