Engineering topics
Li, Meng
Publications and source records attributed to Li, Meng.
Correlating the electrocatalytic stability of platinum monolayer catalysts with their structural evolution in the oxygen reduction reaction
Platinum monolayer (Pt ML ) core–shell electrocatalysts for the oxygen reduction reaction (ORR) have attracted great attention because of their exceptional activity and stability for promising practical applications in fuel cells. In this paper, we describe our in-depth investigation of the relationship between the ORR activity and structure of the Pt ML /Pd/C catalyst during the stability test. By virtue of the rotating disk electrode technique, an accelerated degradation test with the potential window of 0.65 to 1.05 V was applied to the Pt ML /Pd/C to interrogate its long-term reliability in the ORR, the change of its electrochemical surface area, and its surface composition and components. The Pt ML /Pd/C catalyst displayed a volcano-like mass/dollar activity profile in the stability test up to 100k cycles. The overall loss of the activity was recorded to be as low as 17% of the initial value. The ORR activity increased in the initial 20k cycles because the freshly prepared Pt ML did not entirely encompass the whole Pd core, but it was integrated to a full coverage with a more stable configuration during the potential cycling owing to its self-healing property. Then, the activity decreased at a much slower rate than the standard Pt/C because the Pd–Pt core–shell structure due to its structural self-retaining property remained intact and impeded the electrochemical Ostwald ripening of the entire particles. Changes in the morphology and configuration of Pt ML were mapped by combining our experimental investigation with model analyses. Finally, the proposed self-healing and self-retaining mechanisms account for the structure-dependent stability in the ORR and play cornerstone roles in formulating ORR core–shell electrocatalysts.
Screening and identification of potential protein biomarkers for evaluating the efficacy of intensive therapy in pulmonary tuberculosis
Highlights: • The one-year cure rate was significantly higher in sputum negative patients after 2-months intensive therapy. • Four potential biomarkers were found for evaluating the efficacy of 2-months intensive therapy in TB patients. • CO7 and ANGT could serve as potential biomarkers to evaluate the bacteriological condition of Mycobacterium tuberculosis after intensive therapy. This research aimed to discover potential biomarkers for evaluating the therapeutic efficacy of intensive therapy in pulmonary tuberculosis (TB). Protein profiles in 2-months intensively treated TB patients, untreated TB patients, and healthy controls were investigated with iTRAQ-2DLC-MS/MS technique. 71 differential proteins were identified in 2-months intensively treated TB patients. Significant differences in complement component C7 (CO7), apolipoprotein A-IV (APOA4), apolipoprotein C-II (APOC2), and angiotensinogen (ANGT) were found by ELISA validation. CO7 and ANGT were also found significantly different in sputum negative patients, compared with sputum positive patients after intensive treatment. Clinical analysis showed that after 2-months intensive treatment several indicators were significantly changed, and the one-year cure rate of sputum negative patients were significantly higher than sputum positive patients. Diagnostic models consisting of APOC2, CO7 and APOA4 were established to distinguish intensively treated TB patients from untreated TB patients and healthy controls with the AUC value of 0.910 and 0.935. Meanwhile, ANGT and CO7 were combined to identify sputum negative and sputum positive TB patients after intensive treatment with 89.36% sensitivity, 71.43% specificity, and the AUC value of 0.853. The results showed that APOC2, CO7, APOA4, and ANGT may be potential biomarkers for evaluating the efficacy of intensive anti-TB therapy.
Flexible magnetic composites for light-controlled actuation and interfaces
The interaction between light and matter has been long explored, leading to insights based on the modulation and control of electrons and/or photons within a material. An opportunity exists in optomechanics, where the conversion of radiation into material strain and actuation is currently induced at the molecular level in liquid crystal systems, or at the microelectromechanical systems (MEMS) device scale, producing limited potential strain energy (or force) in light-driven systems. We present flexible material composites that, when illuminated, are capable of macroscale motion, through the interplay of optically absorptive elements and low Curie temperature magnetic materials. These composites can be formed into films, sponges, monoliths, and hydrogels, and can be actuated with light at desired locations. Finally, light-actuated elastomeric composites for gripping and releasing, heliotactic motion, light-driven propulsion, and rotation are demonstrated as examples of the versatility of this approach.
Insights into the ecology, evolution, and metabolism of the widespread Woesearchaeotal lineages
Background: As a recently discovered member of the DPANN superphylum, Woesearchaeota account for a wide diversity of 16S rRNA gene sequences, but their ecology, evolution, and metabolism remain largely unknown. Results: Here, we assembled 133 global clone libraries/studies and 19 publicly available genomes to profile these patterns for Woesearchaeota. Phylogenetic analysis shows a high diversity with 26 proposed subgroups for this recently discovered archaeal phylum, which are widely distributed in different biotopes but primarily in inland anoxic environments. Ecological patterns analysis and ancestor state reconstruction for specific subgroups reveal that oxic status of the environments is the key factor driving the distribution and evolutionary diversity of Woesearchaeota. A selective distribution to different biotopes and an adaptive colonization from anoxic to oxic environments can be proposed and supported by evidence of the presence of ferredoxin-dependent pathways in the genomes only from anoxic biotopes but not from oxic biotopes. Metabolic reconstructions support an anaerobic heterotrophic lifestyle with conspicuous metabolic deficiencies, suggesting the requirement for metabolic complementarity with other microbes. Both lineage abundance distribution and co-occurrence network analyses across diverse biotopes confirmed metabolic complementation and revealed a potential syntrophic relationship between Woesearchaeota and methanogens, which is supported by metabolic modeling. If correct, Woesearchaeota may impact methanogenesis in inland ecosystems. Conclusions: The findings provide an ecological and evolutionary framework for Woesearchaeota at a global scale and indicate their potential ecological roles, especially in methanogenesis.
Mixed finite-element method for multi-term time-fractional diffusion and diffusion-wave equations
In this paper, numerical theory based on the mixed finite-element method and finite difference analog of the Caputo fractional derivative for multi-term time-fractional diffusion equations and diffusion-wave equations is analyzed. The unconditional stability and convergence results are proved for the two resulting fully discrete schemes. Finally, the obtained results are supported by numerical experiments carried out for some test problems.
Historical (1750–2014) anthropogenic emissions of reactive gases and aerosols from the Community Emissions Data System (CEDS)
Here, we present a new data set of annual historical (1750–2014) anthropogenic chemically reactive gases (CO, CH 4 , NH 3 , NO x , SO 2 , NMVOCs), carbonaceous aerosols (black carbon – BC, and organic carbon – OC), and CO 2 developed with the Community Emissions Data System (CEDS). We improve upon existing inventories with a more consistent and reproducible methodology applied to all emission species, updated emission factors, and recent estimates through 2014. The data system relies on existing energy consumption data sets and regional and country-specific inventories to produce trends over recent decades. All emission species are consistently estimated using the same activity data over all time periods. Emissions are provided on an annual basis at the level of country and sector and gridded with monthly seasonality. These estimates are comparable to, but generally slightly higher than, existing global inventories. Emissions over the most recent years are more uncertain, particularly in low- and middle-income regions where country-specific emission inventories are less available. Future work will involve refining and updating these emission estimates, estimating emissions' uncertainty, and publication of the system as open-source software.
Targeted emission reductions from global super-polluting power plant units
There are more than 30,000 biomass- and fossil-fuel-burning power plants now operating worldwide, reflecting a tremendously diverse infrastructure, which ranges in capacity from less than a megawatt to more than a gigawatt. In 2010, 68.7% of electricity generated globally came from these power plants, compared with 64.2% in 1990. Although the electricity generated by this infrastructure is vital to economic activity worldwide, it also produces more CO2 and air pollutant emissions than infrastructure from any other industrial sector. Here, we assess fuel- and region-specific opportunities for reducing undesirable air pollutant emissions using a newly developed emission dataset at the level of individual generating units. For example, we find that retiring or installing emission control technologies on units representing 0.8% of the global coal-fired power plant capacity could reduce levels of PM2.5 emissions by 7.7–14.2%. In India and China, retiring coal-fired plants representing 1.8% and 0.8% of total capacity can reduce total PM2.5 emissions from coal-fired plants by 13.2% and 16.0%, respectively. Our results therefore suggest that policies targeting a relatively small number of ‘super-polluting’ units could substantially reduce pollutant emissions and thus the related impacts on both human health and global climate.
Ultrathin SnS{sub 2} nanosheets as robust polysulfides immobilizers for high performance lithium-sulfur batteries
Highlights: • Ultrathin SnS{sub 2} nanosheets have large surface area and fast charge transfer properties. • Ultrathin SnS{sub 2} nanosheets can greatly improve the electrochemical properties of S/C composites for Li-S batteries. • Superior electrochemical performance of S/C-SnS{sub 2}-10 composites can be ascribed to the optimized synergistic effects between SnS{sub 2} and porous carbon. - Abstract: Ultrathin SnS{sub 2} nanosheets modified sulfur/carbon (S/C-SnS{sub 2}) composites were synthesized through a facile method by mixing sublimed sulfur, Ketjen Black and ultrathin SnS{sub 2} nanosheets. The ultrathin SnS{sub 2} nanosheets can provide remarkable binding strength, large surface area and fast charge transfer, therefore leading to favorable chemical interaction with polysulfides in Li-S batteries. Accompanied with the synergistic effects between physical confinement of porous carbon and chemical interactions of SnS{sub 2}, S/C-SnS{sub 2} composites with different mass ratio of ultrathin SnS{sub 2} nanosheets and C show much improved electrochemical properties. Among them, S/C-SnS{sub 2} composite with 10 wt% of ultrathin SnS{sub 2} nanosheets and 75 wt% of sulfur maintains superior long term cycling capacities of 800 mAh g{sup −1} at 0.5 C after 300 cycles and 540 mAh g{sup −1} at 2 C after 700 cycles.
Multi-year application of WRF-CAM5 over East Asia-Part I: Comprehensive evaluation and formation regimes of O3 and PM2.5
Not Available
The leaching kinetics of cadmium from hazardous Cu-Cd zinc plant residues
Highlights: • A cleaner cadmium, zinc and copper recovery method from zinc plant waste residues was investigated. • The mechanisms and kinetics of cadmium recovery were discussed. • The effects of leaching variables were discussed. •The XRD and morphology analysis of raw residue and leaching residue were conducted. - Abstract: A large amount of Cu-Cd zinc plant residues (CZPR) are produced from the hydrometallurgical zinc plant operations. Since these residues contain substantial amount of heavy metals including Cd, Zn and Cu, therefore, they are considered as hazardous wastes. In order to realize decontamination treatment and efficient extraction of the valuable metals from the CZPR, a comprehensive recovery process using sulfuric acid as the leaching reagent and air as the oxidizing reagent has been proposed. The effect of temperature, sulfuric acid concentration, particle size, solid/liquid ratio and stirring speed on the cadmium extraction efficiency was investigated. The leaching kinetics of cadmium was also studied. It was concluded that the cadmium leaching process was controlled by the solid film diffusion process. Moreover, the order of the reaction rate constant versus H{sub 2}SO{sub 4} concentration, particle size, solid/liquid ratio and stirring speed was calculated. The XRD and SEM-EDS analysis results showed that the main phases of the secondary sulfuric acid leaching residues were lead sulfate and calcium sulfate.
Reactivity Worth Measurement of Control Rods of CFBR-II with Inverse Kinetics Method
CFBR-II is a Godiva type metal HEU fast burst reactor. Reactivity adjustment of the reactor depends on three metal HEU rods (CPI, CP2 and CP3), which have positive reactivity worth. Reactivity effectiveness curves of the three rods are important to safe operation and control of CFBR-I. To measure the reactivity, two different techniques were used: the asymptotic period method (APM) and the inverse kinetic method(IKM). The APM is the most common used method on fast burst reactor, which measured the asymptotic power period then determined reactivity with the in-hour equation. This method only works for positive periods (super criticality state). The IKM can measured continuously reactivity changes by analyzing the variation of reactor power level with the inverse kinetic equation, which works for both subcritical and super critical state. We will mainly discuss how to measure reactivity effectiveness curves of control rods by the IKM.
Attribution of PM 2.5 exposure in Beijing–Tianjin–Hebei region to emissions: implication to control strategies
The Beijing–Tianjin–Hebei (BTH) region is one of the most heavily polluted regions in China, with both high PM 2.5 concentrations and a high population density. A quantitative source-receptor relationship can provide valuable insights that can inform effective emission control strategies. Both source apportionment (SA) and source sensitivity (SS) can provide such information from different perspectives. In this study, both methods are applied in northern China to identify the most significant emission categories and source regions for PM 2.5 exposure in BTH in 2013. Despite their differences, both models show similar distribution patterns for population and simulated PM 2.5 concentrations, resulting in overall high PM 2.5 exposure values (approximately 110 μg/m 3 ) and particularly high exposure values during the winter (approximately 200 μg/m 3 ). Both methods show that local emissions play a dominant role (70%), with some contribution from surrounding provinces (e.g., Shandong) via regional transport. The two methods also agree on the priority of local emission controls: both identify industrial, residential, and agricultural emissions as the top three categories that should be controlled locally. In addition, the effect of controlling agricultural ammonia emissions is approximately doubled when the co-benefits of reducing nitrate are considered. In conclusion, the synthesis of SA and SS for addressing specific categories of emissions provides a quantitative basis for the development of emission control strategies and policies for controlling PM 2.5 in China.
Sublocalization of Cytochrome b 6 f Complexes in Photosynthetic Membranes
It is well established that the majority of energy-converting photosynthetic protein complexes in plant thylakoid membrane are nonhomogenously distributed between stacked and unstacked membrane regions. Yet, the sublocalization of the central cytochrome b 6 f complex remains controversial. We present a structural model that explains the variation in cytochrome b 6 f sublocalization data. Small changes in the distance between adjacent membranes in stacked grana regions either allow or restrict access of cytochrome b 6 f complexes to grana. Furthermore, if the width of the gap falls below a certain threshold, then the steric hindrance prevents cytochrome b 6 f access to grana. Evidence is presented that the width of stromal gap is variable, demonstrating that the postulated mechanism can regulate the lateral distribution of the cytochrome b 6 f complexes.
Effect of hydrogen on the integrity of aluminium–oxide interface at elevated temperatures
Hydrogen can facilitate the detachment of protective oxide layer off metals and alloys. The degradation is usually exacerbated at elevated temperatures in many industrial applications; however, its origin remains poorly understood. Here by heating hydrogenated aluminum inside an environmental transmission electron microscope, we show that hydrogen exposure of just a few minutes can greatly degrade the high temperature integrity of metal–oxide interface. Moreover, there exists a critical temperature of ~150 °C, above which the growth of cavities at the metal–oxide interface reverses to shrinkage, followed by the formation of a few giant cavities. Vacancy supersaturation, activation of a long-range diffusion pathway along the detached interface and the dissociation of hydrogen-vacancy complexes are critical factors affecting this behavior. In conclusion, these results enrich the understanding of hydrogen-induced interfacial failure at elevated temperatures.
MIX: a mosaic Asian anthropogenic emission inventory under the international collaboration framework of the MICS-Asia and HTAP
Here, the MIX inventory is developed for the years 2008 and 2010 to support the Model Inter-Comparison Study for Asia (MICS-Asia) and the Task Force on Hemispheric Transport of Air Pollution (TF HTAP) by a mosaic of up-to-date regional emission inventories. Emissions are estimated for all major anthropogenic sources in 29 countries and regions in Asia. We conducted detailed comparisons of different regional emission inventories and incorporated the best available ones for each region into the mosaic inventory at a uniform spatial and temporal resolution. Emissions are aggregated to five anthropogenic sectors: power, industry, residential, transportation, and agriculture. We estimate the total Asian emissions of 10 species in 2010 as follows: 51.3 Tg SO 2 , 52.1 Tg NO x , 336.6 Tg CO, 67.0 Tg NMVOC (non-methane volatile organic compounds), 28.8 Tg NH 3 , 31.7 Tg PM 10 , 22.7 Tg PM 2.5 , 3.5 Tg BC, 8.3 Tg OC, and 17.3 Pg CO 2 . Emissions from China and India dominate the emissions of Asia for most of the species. We also estimated Asian emissions in 2006 using the same methodology of MIX. The relative change rates of Asian emissions for the period of 2006–2010 are estimated as follows: –8.1 % for SO 2 , +19.2 % for NO x , +3.9 % for CO, +15.5 % for NMVOC, +1.7 % for NH 3 , –3.4 % for PM 10 , –1.6 % for PM 2.5 , +5.5 % for BC, +1.8 % for OC, and +19.9 % for CO 2 . Model-ready speciated NMVOC emissions for SAPRC-99 and CB05 mechanisms were developed following a profile-assignment approach.
Canonical straight field line magnetic flux coordinates for tokamaks
Not Available