Search NASA⌕ Search

Engineering topics

Li, Mi

Publications and source records attributed to Li, Mi.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Performance and Economic Analysis of Organosolv Softwood and Herbaceous Lignins to Activated Carbons as Electrode Materials in Supercapacitors

In this work, yellow pine (YP, softwood) and switchgrass (SG, grass) lignins were extracted as a coproduct of an organosolv γ-valerolactone (GVL) biorefinery that also produces biofuels and furfural. The extracted lignins were converted to carbon precursors for synthesizing porous activated carbon electrodes for high energy-density supercapacitors. This research details the impact of lignin composition on the derived porous structures and electrochemical properties of activated carbons. Lignin precursors with various syringyl (S) to guaiacyl (G) contents were characterized using 31 P nuclear magnetic resonance (NMR) and two-dimensional 1 H‒ 13 C NMR. A two-step activation process, using steam and carbon dioxide as the activating agents, enabled the formation of porous carbons structures with high surface area. The capacitive behavior of supercapacitors was systematically characterized by cyclic voltammetry, charge-discharge cycling, and electrochemical impedance spectroscopy. The specific capacitance of YP and SG capacitors reached 367 and 221 F g −1 , respectively. Both types of capacitors demonstrated remarkably stable capacitance (capacitance retention >90%) along with excellent Coulombic efficiency (>99%) over 10,000 cycles. Compared to SG electrode, the better electrochemical performance achieved with YP electrodes was mainly due to shorter diffusion path, improved ionic mobility, and increased active surface area. The inexpensive lignin-based porous electrodes synthesized in this work can be used for various electrochemical devices for improved performance, decreased cost, and enhanced durability. This work also demonstrates that the selection of feedstock and appropriate processing conditions can tailor the structure of carbon composites for targeted applications. Techno-economic analysis indicates that YP and SG activated carbons can be produced at a minimum selling price of $8,493 and $6,670 per ton, respectively, which is competitive with the commercially available supercapacitor-grade activated carbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhancing Lignin Dispersion and Bioconversion by Eliminating Thermal Sterilization

Thermal sterilization is widely applied in fermentation to ensure a pure culture. In this study, a facile and energy-efficient strategy by eliminating thermal sterilization (ETS) was unveiled for upgrading lignin bioconversion. Through alkaline solubilization and neutralization, lignin dispersion in aqueous fermentation media was significantly enhanced by ETS. Small-angle X-ray scattering and dynamic light scattering analyses indicated that the lignin colloid size was dramatically reduced. Compared to 20.5 wt % lignin precipitation during the conventional thermal sterilization, precipitated lignin was not observed within the ETS medium. 31P NMR characterization demonstrated an 11.7% increase of phenolic OH in ETS lignin. Ionization of phenolic OH presented more negatively charged groups, strengthening electrostatic repulsion, resulting in smaller colloidal particles. Interestingly, the pure culture of Rhodococcus opacus PD630 was achieved within the ETS medium due to the lack of lignin degradation ability with most natural microbes. R. opacus PD630 cell amount, lignin degradation, and lipid production by ETS increased by 330, 16.6, and 20.7%, respectively. Overall, an energy-efficient ETS strategy that promoted lignin dispersion and bioconversion significantly is reported in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Strikingly high amount of tricin-lignin observed from vanilla (Vanilla planifolia) aerial roots

Lignin has attracted tremendous interest as a renewable resource for biofuels, biomaterials, and chemicals especially in the era of bio-based refineries. The structural studies of lignin play an essential role in both understanding the nature and biosynthesis of these polymers and optimizing their valorization values. In this study, we have investigated the structures of lignin from different tissues—aerial roots, nodes, internodes, and seeds, from vanilla (Vanilla planifolia) by using gel permeation chromatography (GPC), heteronuclear single-quantum coherence (HSQC) nuclear magnetic resonance (NMR), and 31P NMR. An unusual tricin-lignin was observed in the aerial roots of vanilla with an strikingly high level of tricin unit, whereas the lignin from the nodes and internodes displayed traditional S/G type lignin with only 4–10% tricin abundance. The aerial roots lignin is primarily composed of β-O-4' alkyl-aryl ether substructures (96% of linkages) in comparison to 65 and 73% in the nodes and internodes lignin, respectively. Additionally, thioacidolysis quantification results showed that lignin from aerial roots has 29.1 mg g -1 tricin, about 3- to 5-fold higher than the lignins isolated from nodes (10.1 mg g -1 ) and internodes (6.9 mg g -1 ). This communication of a particularly high level of tricin-lignin in vanilla plant has important impacts including: (1) the presence of the high amount of tricin as part of lignin from aerial roots could play a vital role for the valorization of lignin, even tricin itself, as a feedstock for value-added chemicals and commodities; and (2) it could open new ways to scientists to design and engineer the structure of tricin-lignin, or lignin in general, to confer plants with new or improved properties due to the plasticity of lignification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Degradation of aromatic compounds and lignin by marine protist Thraustochytrium striatum

This paper aimed at studying a novel high biomass strain (HBS) of marine protist, Thraustochytrium striatum, for lignin valorization to lipids and carotenoids. In the screening of 15 aromatic compounds, T. striatum HBS can utilize most compounds while achieving the best growth on 3,4-dihydroxybenzoic acid (3,4-DHBA) and 4-hydroxybenzoic acid (4-HBA). The maximum cell mass concentration reached 2-3 g/L under 5 g/L of 3,4-DHBA or 2 g/L of 4-HBA, which was comparable to that under equivalent concentration of glucose. The long-chain fatty acids content was 13 % and 7 % with 3,4-DHBA and 4-HBA, respectively. The adoption of fed-batch fermentation mode improved the degradation of carbon source and prevented the inhibitory effect caused by overloading of aromatic compounds. Further, both final cellular fatty acids and carotenoids contents were doubled in the fermentation of 3,4-DHBA. T. striatum HBS exhibited limited lignin depolymerization (~24 %) ability on technical lignins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Catalytic degradation of waste rubbers and plastics over zeolites to produce aromatic hydrocarbons

Catalytic conversion of waste rubbers and plastics into aromatic hydrocarbons is a promising approach to waste management and energy recovery. In the present study, acidic HY zeolites were supported by cobalt, iron, and zirconium, and the catalysts were characterized by powder X-ray diffraction, nitrogen adsorption-desorption, ammonia temperature programmed desorption, X-ray photoelectron spectroscopy, and pyridine-Fourier transform infrared spectroscopy. Here, the catalytic degradation of waste polybutadiene rubbers (BR) was conducted to investigate the degradation mechanism and evaluate the catalytic activity of supported zeolites. Experimental results indicated that HY loaded by zirconium and iron led to a higher content of Lewis acid sites as opposed to cobalt supported one. Compared with the non-catalytic pyrolysis of BR, the zirconium supported HY (Zr/HY) led to a 10-fold increase in aromatic hydrocarbons production with a distinctively high selectivity of 97.9%. A series of waste polymers including waste tires (WT), polyethylene (PE), polycarbonate (PC), and BR, were subjected to catalytic pyrolysis to explore the effects of polymer type on aromatic hydrocarbons generation, and BR was the most effective substrate, with yield enhancement reaching 2.4 over Zr/HY. Catalytic co-pyrolysis of waste rubbers and plastics was conducted to probe the effect of polymer structure on aromatic hydrocarbons formation, where a significant synergistic effect was observed in the PE co-fed with PC run.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Wood-reinforced composites by stereolithography with the stress whitening behavior

In this study, poplar wood flour at various concentrations (1–10 wt%) is incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using stereolithography apparatus (SLA) 3D printing. Differential scanning calorimetry (DSC) along with Fourier transform infrared spectroscopy (FTIR) analysis shows the presence of a small amount of residual monomer in the printed samples. For the printed composites, the glass transition temperature (T g ) from dynamic mechanical analysis (DMA) decreases as more wood flour is incorporated, which indicates an increase in free volume occupied by polymer chains. The tensile strength is improved up to 17.3% from 21.1 MPa (no wood flour) to 24.7 MPa (1.0 wt% wood flour). The highest Young’s modulus reaches 323.8 MPa (2.0 wt% wood flour), which is 1.9-fold of that of the sample without wood flour. Moreover, the composites show “stress whitening” with the addition of wood flour during the uniaxial drawing. Morphology analysis of the tested samples show that the formation of microcraze and microvoids likely causing the stress whitening. This is the first study that demonstrates wood flour can be utilized in SLA 3D printed wood plastic composites (WPC) which can reinforce the printed products with a modest loading amount.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Synthesis and Characterization of Lignin-grafted-poly(ε-caprolactone) from Different Biomass Sources

Modification of lignin with poly(ε-caprolactone) is a promising approach to valorize industrial low-value lignins and to advance the bioeconomy. We have synthesized lignin grafted poly(ε-caprolactone) (lignin-g-PCL) copolymers via ring-opening polymerization of ε-caprolactone with different types of lignins of varying botanical sources (G-type pine lignin, S/G-type poplar lignin, and C-type Vanilla seeds lignin) and lignin extraction methods (Kraft and ethanol organosolv pulping). The lignin-g-PCL copolymer showed remarkably improved compatibility and dispersion in acetone, chloroform, and toluene in comparison to non-modified lignins. The structure and thermal properties of the lignin-g-PCL were investigated using Fourier-transform infrared spectroscopy (FTIR), 31 P nuclear magnetic resonance (NMR), 2D heteronuclear single quantum correlation (HSQC) NMR, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, we have found that all the technical lignins were reactive to the copolymerization reaction regardless of their plant source and isolation methods. The molecular weights of the synthesized lignin-g-PCL copolymers were positively correlated with the content of aliphatic lignin hydroxyls, suggesting that the copolymerization reaction tends to occur preferentially at the aliphatic hydroxyls rather than the phenolic hydroxyls of lignin. Thermal analyses of the lignin-g-PCL copolymers were studied, and in general, a reduction of melting temperature and crystallinity percentage in comparison to the neat PCL was observed. However, the thermal behavior of lignin-g-PCL copolymers varied depending on the lignin feedstocks employed in the copolymerization reaction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The effect of switchgrass plant cell wall properties on its deconstruction by thermochemical pretreatments coupled with fungal enzymatic hydrolysis or Clostridium thermocellum consolidated bioprocessing

A combination of thermochemical pretreatment and biological digestion technologies is usually required to overcome lignocellulosic recalcitrance and accomplish effective biomass deconstruction. In this study, we aimed to understand switchgrass breakdown by hydrothermal, dilute acid, dilute alkali, and co-solvent enhanced lignocellulosic fractionation (CELF) pretreatments followed by application of traditional fungal enzymatic hydrolysis (EH) and Clostridium thermocellum consolidated bioprocessing (CBP) to the resulting solids. Unpretreated and pretreated switchgrass and their EH and CBP residues were characterized by a suite of analytical techniques to understand structural changes that occurred during deconstruction. CELF pretreated solids showed the highest accessibility and digestibility by both EH and CBP followed by dilute alkali and then dilute acid/hydrothermal pretreated solids. Lignin removal from biomass had a more positive impact on substrate accessibility and digestibility than did xylan removal, while xyloglucan removal by pretreatment appeared essential for cellulose digestion by fungal enzymes. The extent of CBP digestion of cellulose and non-cellulosic glycans was larger than that by EH. Unlike dilute alkali pretreatment, cellulose crystallinity increased for acid-based pretreatments in the following order: hydrothermal, dilute acid, and CELF. Acid-based pretreatments also substantially reduced cellulose degree of polymerization. All thermochemical and biological digestion approaches increased syringyl to guaiacyl lignin (S/G) ratio and reduced β-O-4 lignin interunit linkage and hydroxycinnamates content from levels in unpretreated switchgrass. The substantial increase in S/G ratio after hydrothermal and dilute alkali preatreatments suggested that high temperatures or alkali removed a large portion of G lignin from switchgrass.

09 BIOMASS FUELS↗
DOE OSTI2020

Synergistic enhancement of nanocellulose foam with dual in situ mineralization and crosslinking reaction

Cellulose nanocrystals (CNCs) foams have recently gained research interests because they are renewable, abundant, biodegradable and exhibit high surface area. However, the application of CNCs-based foams is still challenging, which is attributed to its lack of effective entanglements between the CNCs particles, thus lowering foam properties. In this study, a synergistic enhancement strategy was proposed, based on the in situ mineralization with hydroxyapatite (HAP) layer onto the CNCs surface, followed by a chemical crosslinking reaction. The physical and chemical structures of the composites were analyzed with SEM, STEM, XRD, FTIR, and TGA. By controlling the amount of coated HAP and the crosslinker, it is possible to manufacture a series of CNCs-based foams that are lightweight (50–75 mg/cm 3 ), highly porous (~90%) with high water absorption (>1300%) and outstanding mechanical strength properties (as high as 1.37 MPa). Moreover, our study further indicated that these CNCs/HAP materials could increase the proliferation of rat osteoblast cells. The method developed in this study presents a novel approach to design improved networked CNCs foam, which has the potential to be used in thermal-retardant material, wastewater treatment, tissue engineering, and personal care applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Influence of plasticizers on thermal and mechanical properties of biocomposite filaments made from lignin and polylactic acid for 3D printing

Polylactic acid (PLA) and organosolv lignin were mixed at different ratios and extruded to obtain PLA-lignin composite filaments. PLA was replaced with lignin up to 20 wt%. Two plasticizers (polyethylene glycol (PEG) 2000 and struktol TR451) were added in varying concentrations to enhance the properties of PLA_L20 (20% lignin in PLA) composite filaments. Furthermore, the effect of lignin in PLA, and PEG, and struktol in PLA_L20 composites was investigated via tensile test, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, Fourier transform infrared spectroscopy of the filaments, and dynamic mechanical analysis of 3D printed samples. A 2 wt% PEG was able to enhance both tensile stress and elongation at maximum load of PLA_L20 composite by 19% and 35%, respectively, whereas struktol TR451 was able to improve elongation at maximum load by 24%.

3D printing↗
DOE OSTI2020

Mechanistic Insight into Lignin Slow Pyrolysis by Linking Pyrolysis Chemistry and Carbon Material Properties

As a highly abundant renewable carbon source, lignin can be converted to a variety of advanced carbon materials with tailorable properties through slow pyrolysis. In this study, slow pyrolysis of kraft lignin, for the first time, was investigated with a commercial pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) system through evolved gas analysis-MS (EGA-MS) and heart-cutting-GC–MS (HC-GC–MS) analyses. These analyses allow recovery and examination of the multiphased gas products generated from thermal decomposition of lignin during slow pyrolysis at a controlled heating rate over a long time course, thus making it possible to link operation conditions, pyrolysis chemistry, and carbon material properties. The overall product distributions, including volatiles and solid products, were quantitatively tracked at different heating rates (2, 20, and 40 °C/min) and different temperature regions (100–200, 200–300, and 300–600 °C). Solid residues were further characterized using a suite of analytical tools, in correlation with the investigation of formation mechanisms of volatiles to reveal the reaction chemistry of lignin during slow pyrolysis and to determine the morphology, pore structure, and interfacial chemical properties. This study provides critical insights into the slow pyrolysis chemistry of lignin and the properties of the resulting carbon material. These results will facilitate a better design and control of the lignin slow pyrolysis process for synthesizing functional carbon materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recent advancements of plant-based natural fiber–reinforced composites and their applications

Demands for reducing energy consumption and environmental impacts are the major driving factors for the development of natural fiber–reinforced composites (NFRCs) in many sectors. Compared with synthesized fiber, natural fiber provides several advantages in terms of biodegradability, light weight, low price, life-cycle superiority, and satisfactory mechanical properties. However, the inherent features of plant-based natural fibers have presented challenges to the development and application of NFRCs, such as variable fiber quality, limited mechanical properties, water absorption, low thermal stability, incompatibility with hydrophobic matrices, and propensity to agglomeration. Substantial research has recently been conducted to address these challenges for improved performance of NFRCs and their applications. This article reviews the recent advancements of plant-based NFRCs, focusing on strategies and breakthroughs in enhancing the NFRCs’ performance, including fiber modification, fiber hybridization, lignocellulosic fillers incorporation, conventional processing techniques, additive manufacturing (3D printing), and new fiber source exploration. In conclusion, the sustainability of plant-based NFRCs using life-cycle assessment and the burgeoning applications of NFRCs with emphasis on the automotive industry are also discussed.

3D reinforcement↗
DOE OSTI2020

Natural deep eutectic solvent mediated extrusion for continuous high-solid pretreatment of lignocellulosic biomass

Several deep eutectic solvents (DESs) have been demonstrated to be highly effective for lignocellulosic biomass pretreatment, combining the advantages of simple synthesis, relatively low chemical cost and better biocompatibility. However, low biomass loading that is usually involved with DES pretreatment hinders its practical use. Here, a twin-screw extruder was used for pretreating biomass sorghum bagasse at solid loadings up to 50%, mediated by a neutral-pH DES, choline chloride : glycerol (ChCl : Gly). This continuous extrusion process led to high glucose and xylose yields of >85% from enzymatic saccharification of the pretreated sorghum. A combination of microscopic, spectroscopic, and X-ray diffraction analyses demonstrate a high degree of defibration and disruption of the biomass cell wall structures; however, little or no change in chemical compositions. Further results from gel permeation chromatographic (GPC) and nuclear magnetic resonance (NMR) spectroscopic analyses indicate that ChCl : Gly-mediated extrusion preserved the basic lignin structural characteristics with no significant differences between extruded biomass at a solid loading of 30% and 50%. This study demonstrates the potential of DES-mediated extrusion as a highly effective continuous high-solid biomass pretreatment technology for industrially relevant applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Observation of Potential Contaminants in Processed Biomass Using Fourier Transform Infrared Spectroscopy

With rapidly increased interests in biomass, diverse chemical and biological processes have been applied for biomass utilization. Fourier transform infrared (FTIR) analysis has been used for characterizing different types of biomass and their products, including natural and processed biomass. During biomass treatments, some solvents and/or catalysts can be retained and contaminate biomass. In addition, contaminants can be generated by the decomposition of biomass components. Herein, we report FTIR analyses of a series of contaminants, such as various solvents, chemicals, enzymes, and possibly formed degradation by-products in the biomass conversion process along with poplar biomass. This information helps to prevent misunderstanding the FTIR analysis results of the processed biomass.

09 BIOMASS FUELS↗
DOE OSTI2020

Increasing the Carbohydrate Output of Bamboo Using a Combinatorial Pretreatment

Bamboo represents a family of highly lignified biomass with significant resistance to cellulolytic enzyme degradation, and typically, a severe thermochemical pretreatment is needed to overcome its recalcitrance for producing fermentable sugars. Combinatorial pretreatments with a low holding temperature and low alkali dosage were investigated in this study in an attempt to remove the impediments to the accessibility of bamboo cellulose to enzymes and enable the efficient conversion of hemicellulose. Upon autohydrolysis at 180 °C, more than half of the hemicellulose (~58%) was solubilized, contributing to further delignification in the subsequent dilute alkali extraction (DAE). The solubilized hemicellulose mainly existed in the form of soluble xylan, which, after a novel endo-β-1,4-xylanase hydrolysis, generated a large amount of xylo-oligosaccharides with the xylobiose and xylotriose proportion reaching 72.99%. After the fractionation with combinatorial pretreatments, cellulose and xylose enzymatic hydrolysis yields were 73.36 and 86.98%, respectively, representing increments of 22.42 and 43.15% compared with the sole autohydrolysis process. Fluorescence microscopy (FM) and confocal Raman microscopy (CRM) images revealed that these dramatic improvements were caused by the deconstruction of the bamboo cell walls, including separation of the adjacent cell walls, removal of hemicellulose and lignin, migration and redistribution of lignin, and the increased exposure of cellulose. In addition, lignin chemical structure variations during the combinatorial pretreatment were analyzed with gel permeation chromatography (GPC), 2D HSQC NMR, and 31 P NMR, and the correlation between the lignin structure and enzymatic hydrolysis efficiency was investigated. In summary, this study highlighted the application of combinatorial pretreatments to maximize the carbohydrate output of bamboo and unveiled their mechanism that enabled the high-efficiency utilization of bamboo.

09 BIOMASS FUELS↗
DOE OSTI2020

A biomass pretreatment using cellulose-derived solvent Cyrene

Despite only recently becoming available in the quantities required for solvent usage, the cellulose-derived solvent, named Cyrene, has gained significant attention in green chemistry in recent years. To fulfill the sustainability criteria of future biorefineries, a novel renewable biomass pretreatment using Cyrene and water was developed for the first time. Results showed that Cyrene has high potential as a green pretreatment solvent in terms of lignin fractionation/recovery and sugar release in the follow-up enzymatic hydrolysis. The mechanism of this pretreatment was revealed by investigating the structural characteristics of pretreated biomass, and the recovered lignin was also fully characterized to assess its valorization potential. Results indicated that Cyrene pretreatment could be performed at a mild condition (120 °C) to reduce the lignin condensation and the cleavage of β-O-4 linkages without compromising lignin removal and the following sugar platform. The successful utilization of this cellulose-derived solvent in pretreatment will further contribute to the realization of a “closed-loop” biorefinery process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗