Search NASA⌕ Search

Engineering topics

Li, Na

Publications and source records attributed to Li, Na.

At least 37 records · Page 2

Imaging the kinetics of anisotropic dissolution of bimetallic core–shell nanocubes using graphene liquid cells

Chemical design of multicomponent nanocrystals requires atomic-level understanding of reaction kinetics. Here, we apply single-particle imaging coupled with atomistic simulation to study reaction pathways and rates of Pd@Au and Cu@Au core-shell nanocubes undergoing oxidative dissolution. Quantitative analysis of etching kinetics using in situ transmission electron microscopy (TEM) imaging reveals that the dissolution mechanism changes from predominantly edge-selective to layer-by-layer removal of Au atoms as the reaction progresses. Dissolution of the Au shell slows down when both metals are exposed, which we attribute to galvanic corrosion protection. Morphological transformations are determined by intrinsic anisotropy due to coordination-number-dependent atom removal rates and extrinsic anisotropy induced by the graphene window. Our work demonstrates that bimetallic coreshell nanocrystals are excellent probes for the local physicochemical conditions inside TEM liquid cells. Furthermore, single-particle TEM imaging and atomistic simulation of reaction trajectories can inform future design strategies for compositionally and architecturally sophisticated nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biaxial Strains Mediated Oxygen Reduction Electrocatalysis on Fenton Reaction Resistant L1 0 ‐PtZn Fuel Cell Cathode

Abstract PtM alloy catalysts (e.g., PtFe, PtCo), especially in an intermetallic L1 0 structure, have attracted considerable interest due to their respectable activity and stability for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, metal‐catalyzed formation of ·OH from H 2 O 2 (i.e., Fenton reaction) by Fe‐ or Co‐containing catalysts causes severe degradation of PEM/catalyst layers, hindering the prospects of commercial applications. Zinc is known as an antioxidant in Fenton reaction, but is rarely alloyed with Pt owing to its relatively negative redox potential. Here, sub‐4 nm intermetallic L1 0 ‐PtZn nanoparticles (NPs) are synthesized as high‐performance PEMFC cathode catalysts. In PEMFC tests, the L1 0 ‐PtZn cathode achieves outstanding activity (0.52 A mg Pt −1 at 0.9 V iR ‐free , and peak power density of 2.00 W cm −2 ) and stability (only 16.6% loss in mass activity after 30 000 voltage cycles), exceeding the U.S. DOE 2020 targets and most of the reported ORR catalysts. Density function theory calculations reveal that biaxial strains developed upon the disorder‐order (A1L1 0 ) transition of PtZn NPs would modulate the surface PtPt distances and optimize PtO binding for ORR activity enhancement, while the increased vacancy formation energy of Zn atoms in an ordered structure accounts for the improved stability.

Liang, Jiashun↗

Programmable Synthesis of Multimetallic Phosphide Nanorods Mediated by Core/Shell Structure Formation and Conversion

Generalized synthetic strategies for nanostructures with well-defined physical dimensions and broad-range chemical compositions are at the frontier of advanced nanomaterials design, functionalization, and application. In this paper, we report a composition-programmable synthesis of multimetallic phosphide CoMP x nanorods (NRs) wherein M can be controlled to be Fe, Ni, Mn, Cu, and their binary combinations. Forming Co 2 P/MP x core/shell NRs and subsequently converting them into CoMP x solid-solution NRs through thermal post-treatment are essential to overcome the obstacle of morphology/structure inconsistency faced in conventional synthesis of CoMP x with the different M compositions. The resultant CoMP x with uniform one-dimensional (1-D) structure provides us a platform to unambiguously screen the M synergistic effects in improving the electrocatalytic activity, as exemplified by the oxygen evolution reaction. This new approach mediated by core/shell nanostructure formation and conversion can be extended to other multicomponent nanocrystal systems (metal alloy, mixed oxide, and chalcogenide, etc.) for diverse applications.

36 MATERIALS SCIENCE↗

Dynamical properties of a room temperature ionic liquid: Using molecular dynamics simulations to implement a dynamic ion cage model [plus supplemental information]

The transport behavior of ionic liquids (ILs) is pivotal for a variety of applications, especially when ILs are used as electrolytes. Many aspects of the transport dynamics of ILs remain to be understood. Here, a common ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BmimNTf 2 ), was studied with molecular dynamics simulations. The results show that BmimNTf 2 displays typical structural relaxation, subdiffusive behavior, and a breakdown of the Stokes-Einstein diffusion relation as in glass-forming liquids. In addition, the simulations show that the translational dynamics, reorientation dynamics, and structural relaxation dynamics are well described by the Vogel-Fulcher-Tammann equation like fragile glass forming liquids. Building on previous work that employed ion cage models, it was found that the diffusion dynamics of the cations and anions were well described by a hopping process random walk where the step time is the ion cage lifetime obtained from the cage correlation function. Detailed analysis of the ion cage structures indicated that the electrostatic potential energy of the ion cage dominates the diffusion dynamics of the caged ion. The ion orientational relaxation dynamics showed that ion reorientation is a necessary step for ion cage restructuring. The dynamic ion cage model description of ion diffusion presented here may have implications for designing ILs to control their transport behavior.

36 MATERIALS SCIENCE↗

Tungsten‐Doped L1 0 ‐PtCo Ultrasmall Nanoparticles as a High‐Performance Fuel Cell Cathode

Abstract The commercialization of proton exchange membrane fuel cells (PEMFCs) relies on highly active and stable electrocatalysts for oxygen reduction reaction (ORR) in acid media. The most successful catalysts for this reaction are nanostructured Pt‐alloy with a Pt‐skin. The synthesis of ultrasmall and ordered L1 0 ‐PtCo nanoparticle ORR catalysts further doped with a few percent of metals (W, Ga, Zn) is reported. Compared to commercial Pt/C catalyst, the L1 0 ‐W‐PtCo/C catalyst shows significant improvement in both initial activity and high‐temperature stability. The L1 0 ‐W‐PtCo/C catalyst achieves high activity and stability in the PEMFC after 50 000 voltage cycles at 80 °C, which is superior to the DOE 2020 targets. EXAFS analysis and density functional theory calculations reveal that W doping not only stabilizes the ordered intermetallic structure, but also tunes the Pt‐Pt distances in such a way to optimize the binding energy between Pt and O intermediates on the surface.

Liang, Jiashun↗

Tungsten‐Doped L1 0 ‐PtCo Ultrasmall Nanoparticles as a High‐Performance Fuel Cell Cathode

Abstract The commercialization of proton exchange membrane fuel cells (PEMFCs) relies on highly active and stable electrocatalysts for oxygen reduction reaction (ORR) in acid media. The most successful catalysts for this reaction are nanostructured Pt‐alloy with a Pt‐skin. The synthesis of ultrasmall and ordered L1 0 ‐PtCo nanoparticle ORR catalysts further doped with a few percent of metals (W, Ga, Zn) is reported. Compared to commercial Pt/C catalyst, the L1 0 ‐W‐PtCo/C catalyst shows significant improvement in both initial activity and high‐temperature stability. The L1 0 ‐W‐PtCo/C catalyst achieves high activity and stability in the PEMFC after 50 000 voltage cycles at 80 °C, which is superior to the DOE 2020 targets. EXAFS analysis and density functional theory calculations reveal that W doping not only stabilizes the ordered intermetallic structure, but also tunes the Pt‐Pt distances in such a way to optimize the binding energy between Pt and O intermediates on the surface.

Liang, Jiashun↗

Enhancing the Rate Capability of Niobium Oxide Electrode through Rare‐Earth Doping Engineering

Abstract Niobium oxide is considered one of the most promising electrode materials for ultrafast electrochemical energy storage devices with high energy density. In this work, we first found that trace amounts (<1 %) of Yb 3+ doping remarkably enhanced the rate capability of T−Nb 2 O 5 , which was further proved to be because of the formation of a thin layer of amorphous YbNbO x . The capacity of YbNbO x ‐coated Nb 2 O 5 reached 124 mAh g −1 at 20 C, which is the highest value reported among pristine Nb 2 O 5 electrodes. Besides, we found that doping with other rare‐earth elements such as Nd 3+ , Sm 3+ , and Gd 3+ can also improve the rate capability of T−Nb 2 O 5 . It can be concluded that rare‐earth doping can be an effective and robust method to enhance the intrinsic rate performance of electrode materials without complicated modifications.

Yin, Dandan↗

Carbon-pore-sheathed cobalt nanoseeds: An exceptional and durable bifunctional catalyst for zinc-air batteries

Exceptional and durable catalysts for Zinc-air batteries are plagued by nanoparticle agglomeration. As a proof-of-concept, we designed carbon-pore-sheathed cobalt nanoseeds by loading cobalt nanoparticles into N-doped defective carbon pores. Introduced N-doping, Co-N-C bond and graphitic/graphenic carbon defects endow the catalyst with exceptional catalytic activity. Most importantly, the design of Co confined within carbon pores effectively solved the dilemma of nanomaterial stability. By balancing the high catalytic activity and stable cyclability, this unique catalyst is among the outstanding bifunctional catalysts, with a high ORR half-wave potential of 0.847 V and a low OER potential at 10 mA/cm 2 of 1.593 V. As demonstrated in the full cell, a peak power density of 135 mW/cm 2 at a current density of 200 mA/cm 2 and 450 h of stable cycling performance without fading at a current density of 30 mA/cm 2 was delivered.

25 ENERGY STORAGE↗

In Situ Electron Microscopy Investigation of Sodiation of Titanium Disulfide Nanoflakes

Two-dimensional (2D) metal sulfides show great promises for their potential applications as electrode materials of sodium ion batteries because of the weak interlayer van der Waals interactions which allow the reversible accommodation and extraction of sodium ions. The sodiation of metal sulfides can undergo a distinct process compared to that of lithiation, which is determined by their metal and structural types. Yet, the structural and morphological evolution during its electrochemical sodiation is still unclear. In this report, we studied the sodiation reaction dynamics of TiS 2 by employing in situ transmission electron microscopy and first-principles calculations. During the sodium ion intercalation process, we observed multiple intermediate phases (phase II, phase Ib, and phase Ia), different from its lithiation counterpart, with varied sodium occupation sites and interlayer stacking sequences. Further insertion of Na ions prompted a multi-step extrusion reaction which led to the phase separation of Ti metal from the Na 2 S matrix, with its 2D morphology expanded to a 3D morphology. In contrast to regular conversion electrodes, TiS 2 still maintained a compacted structure after a full sodiation. Frist-principles calculations reveal that the as-identified phases are thermodynamically preferred at corresponding intercalation/extrusion stages compared to other possible phases. The current work provides the fundamental mechanistic understanding of the sodiation process of 2D transition metal sulfides.

25 ENERGY STORAGE↗

In situ iron coating on nanocatalysts for efficient and durable oxygen evolution reaction

The oxygen evolution reaction (OER) is essential to many important energy conversion and storage systems. To achieve high-performance and low-cost OER electrocatalysts, great effort has been devoted to the development of noble-metal-free OER nanocatalysts. While nanostructured materials have been shown effective at improving the catalytic activity, the stability of the nanocatalyst has yet to be significantly improved. Furthermore, nanocatalyst syntheses are typically complex, limiting their practical application. Herein, we design a noble-metal-free nanocatalyst which has a CoFeP x core and an in situ Fe coating layer to enhance the material’s catalytic activity and durability for OER. We utilize the vapor pressure difference of Fe and Co at high temperature to synthesize the CoFeP x -Fe core-shell nanoparticles via a one-step high-temperature shock technique. The high-temperature method strongly anchors the CoFeP x nanoparticles onto a carbon substrate. The thin Fe shell layer (~2 nm) coated on the CoFeP x greatly enhances the durability of the CoFeP x catalyst without hampering its activity due to the geometric effect. This nanocatalyst with an in situ Fe shell demonstrates a successful nanocoating approach for fabricating catalytically active protection layers on catalysts with improved activity and durability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗