Optimizing 3D structure of H2O molecule using DDPG
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Li, P.
Explore the source record for details and available documents.
Purpose: Cannot observe the dose intuitionally is a limitation of the existing 2D pre-implantation dose planning. Meanwhile, a navigation module is essential to improve the accuracy and efficiency of the implantation. Hence a 3D Image Guided Brachytherapy Planning System conducting dose planning and intra-operative navigation based on 3D multi-organs reconstruction is developed. Methods: Multi-organs including the tumor are reconstructed in one sweep of all the segmented images using the multiorgans reconstruction method. The reconstructed organs group establishs a three-dimensional visualized operative environment. The 3D dose maps of the three-dimentional conformal localized dose planning are calculated with Monte Carlo method while the corresponding isodose lines and isodose surfaces are displayed in a stereo view. The real-time intra-operative navigation is based on an electromagnetic tracking system (ETS) and the fusion between MRI and ultrasound images. Applying Least Square Method, the coordinate registration between 3D models and patient is realized by the ETS which is calibrated by a laser tracker. The system is validated by working on eight patients with prostate cancer. The navigation has passed the precision measurement in the laboratory. Results: The traditional marching cubes (MC) method reconstructs one organ at one time and assembles them together. Compared to MC, presented multi-organs reconstruction method has superiorities in reserving the integrality and connectivity of reconstructed organs. The 3D conformal localized dose planning, realizing the 'exfoliation display' of different isodose surfaces, helps make sure the dose distribution has encompassed the nidus and avoid the injury of healthy tissues. During the navigation, surgeons could observe the coordinate of instruments real-timely employing the ETS. After the calibration, accuracy error of the needle position is less than 2.5mm according to the experiments. Conclusion: The speed and quality of 3D reconstruction, the efficiency in dose planning and accuracy in navigation all can be improved simultaneously.
Structure, magnetic, and transport properties of the epitaxial Fe{sub 3-x}Ti{sub x}O{sub 4} films with x{<=} 0.09 fabricated by reactive co-sputtering were investigated systematically. The lattice constant expands from 0.8360 to 0.8376 nm with x increases from 0 to 0.09. The room-temperature saturation magnetization increases by 31.7%, and the negative magnetoresistance (at 100 K) increases from 3.7% to 6.9% as x increases from 0 to 0.09. The results indicate that Ti atoms might exist at the tetrahedral sites in the spinel structure. Theoretical calculations based on the density-functional theory suggest that the doped Ti on the tetrahedral sites indeed enhances the lattice constant and magnetic moment. Meanwhile, the calculated results also imply that the Ti-doped Fe{sub 3}O{sub 4} has a high spin polarization near 100%.
High-intensity pulsed ion beam (HIPIB) irradiation of AZ31 magnesium alloy is performed and electrochemical corrosion experiment of irradiated samples is carried out by using potentiodynamic polarization technology in order to explore the effect of HIPIB irradiation on corrosion resistance of magnesium alloy. The surface composition, cross-sectional morphology and microstructure are characterized by using electron probe microanalyzer, optical microscope and transmission electron microscope, respectively. The results indicated that HIPIB irradiation leads to a significant improvement in corrosion resistance of magnesium alloy, in terms of the considerable increase in both corrosion potential and pitting breakdown potential. The microstructural refinement and surface purification induced by HIPIB irradiation are responsible for the improved corrosion resistance. - Research Highlights: {yields} A modified layer about 30 {mu}m thick is obtained by HIPIB irradiation. {yields} Selective ablation of element/impurity phase having lower melting point is observed. {yields} More importantly, microstructural refinement occurred on the irradiated surface. {yields} The modified layer exhibited a significantly improved corrosion resistance. {yields} Improved corrosion resistance is ascribed to the combined effect induced by HIPIB.
The fully epitaxial Fe{sub 3}O{sub 4}/ZnO heterostructures were fabricated by reactive dc sputtering (Fe{sub 3}O{sub 4}) and rf sputtering (ZnO) on c-Al{sub 2}O{sub 3} substrates. The epitaxial relationship is verified to be Fe{sub 3}O{sub 4}(111)<110>(parallel sign)ZnO(0002)<1120> by {phi} scans. The nonlinear and rectifying properties of I-V curves were observed in the heterostructures. The transport mechanism across the interface between Fe{sub 3}O{sub 4} and ZnO is thermal emission and the Schottky barrier is calculated to be 0.51 eV. The magnetoresistance of the heterostructures is symmetric and depends on current. The spin polarization of the transport electrons from Fe{sub 3}O{sub 4} into ZnO is determined to be 28.5% at 30 K.
Nominal composition of Ba{sub 0.93}Bi{sub 0.07}Ti{sub 1-x}Mn{sub x}O{sub 3} (x=0, 0.02, and 0.04) ceramics have been prepared by a modified Pechini method. X-ray diffraction analysis reveals that the samples are pure perovskite BaTiO{sub 3} (BTO) structure with no trace of impurity phase. The cell volume of the composites increases monotonously with the increase in Mn content, which indicates that Mn ions have been incorporated into the lattice of Ba{sub 0.93}Bi{sub 0.07}TiO{sub 3}. The samples are experimentally confirmed to show ferromagnetic (FM) and ferroelectric behaviors simultaneously at room temperature. The temperature dependent magnetic behaviors show complex magnetic interactions including FM, antiferromagnetic, and paramagnetic. These results suggest that the dopant Bi and Mn help BTO transit from pure ferroelectric to multiferroic materials and the magnetic behaviors can be explained by the bound magnetic polaron model with inhomogeneity of Mn dopant distribution.
Epitaxial Fe{sub 3}O{sub 4} thin films were synthesized by facing-target reactive sputtering Fe targets. The epitaxy of the Fe{sub 3}O{sub 4} film on MgO (100) was examined macroscopically using x-ray diffraction, including conventional theta-2theta scan, tilting 2theta scan, phi scan, and pole figure. The observed low-field butterfly-shaped magnetoresistance (MR) are explained by the primary fast rotation of the spins far away from antiphase boundaries and the high-field MR changing linearly with magnetic field can be understood by the gradual rotation of the spins near the antiphase boundaries. It is magnetocrystalline anisotropy that causes an increase in MR below Verwey transition temperature.