Search NASA⌕ Search

Engineering topics

Li, Peng

Publications and source records attributed to Li, Peng.

At least 37 records · Page 2

Topography of respiratory tract and gut microbiota in mice with influenza A virus infection

Introduction Influenza A virus (IAV)-induced dysbiosis may predispose to severe bacterial superinfections. Most studies have focused on the microbiota of single mucosal surfaces; consequently, the relationships between microbiota at different anatomic sites in IAV-infected mice have not been fully studied. Methods We characterized respiratory and gut microbiota using full-length 16S rRNA gene sequencing by Nanopore sequencers and compared the nasopharyngeal, oropharyngeal, lung and gut microbiomes in healthy and IAV-infected mice. Results The oropharyngeal, lung and gut microbiota of healthy mice were dominated by Lactobacillus spp., while nasopharyngeal microbiota were comprised primarily of Streptococcus spp. However, the oropharyngeal, nasopharyngeal, lung, and gut microbiota of IAV-infected mice were dominated by Pseudomonas, Escherichia , Streptococcus , and Muribaculum spp., respectively. Lactobacillus murinus was identified as a biomarker and was reduced at all sites in IAV-infected mice. The microbiota composition of lung was more similar to that of the nasopharynx than the oropharynx in healthy mice. Discussion These findings suggest that the main source of lung microbiota in mice differs from that of adults. Moreover, the similarity between the nasopharyngeal and lung microbiota was increased in IAV-infected mice. We found that IAV infection reduced the similarity between the gut and oropharyngeal microbiota. L. murinus was identified as a biomarker of IAV infection and may be an important target for intervention in post-influenza bacterial superinfections.

Chen, Qichao↗

Editorial: Edge computation and digital distribution networks

The development of digital technologies is penetrating all areas of energy revolution. Based on the in-depth integration of advanced digital technologies, distribution networks are gradually transforming into digital distribution networks (DDNs) with tremendous changes from the structure to the operation mode. DDNs is the digitalized appearance of the physical distribution network, in which ubiquitous connections and massive data are the basic characteristics (Huo et al., 2022). It is an important task to utilize the massive data and propose novel operation modes to construct more efficient and intelligent distribution networks (Jian et al., 2022). Among the advanced digital technologies in DDNs, edge computing has received wide attention (Zhao et al., 2022). It has superior performance in local sensing and intelligent computation, which can effectively relieve huge communication pressure. However, the limited computing resources and the complex computing tasks at the edge side significantly challenge the collaboration of distribution network regulation and advanced digital technologies (Hu et al., 2022). It is necessary to find out proper methods to utilize advanced digital technology to construct DDNs. This Research Topic is organized to introduce the recent progress in the construction, operation and advanced computational methods for DDNs. Finally, seven papers have been accepted, which can be sorted into the following three categories: 1) Evolution and technical features of DDNs, 2) Intelligent operation control of DDNs, 3) Advanced simulation for large-scale DDNs. The three sections below respectively introduce the major research and contributions of the papers covered in each category.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Colossal Nernst power factor in topological semimetal NbSb 2

Today solid-state cooling technologies below liquid nitrogen boiling temperature (77 K), crucial to quantum information technology and probing quantum state of matter, are greatly limited due to the lack of good thermoelectric and/or thermomagnetic materials. Here, we report the discovery of colossal Nernst power factor of 3800 × 10 -4 W m -1 K -2 under 5 T at 25 K and high Nernst figure-of-merit of 71 × 10 -4 K -1 under 5 T at 20 K in topological semimetal NbSb 2 single crystals. The observed high thermomagnetic performance is attributed to large Nernst thermopower and longitudinal electrical conductivity, and relatively low transverse thermal conductivity. The large and unsaturated Nernst thermopower is the result of the combination of highly desirable electronic structures of NbSb 2 having compensated high mobility electrons and holes near Fermi level and strong phonon-drag effect. This discovery opens an avenue for exploring material option for the solid-state heat pumping below liquid nitrogen temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quasiparticle characteristics of the weakly ferromagnetic Hund metal MnSi

Hund metals are multiorbital systems with 3d or 4d electrons exhibiting both an itinerant character and local moments, and they feature Kondo-like screenings of local orbital and spin moments, with suppressed coherence temperatures driven by Hund's coupling J H . They often exhibit magnetic order at low temperature, but how the interaction between the Kondo-like screening and long-range magnetic order is manifested in the quasiparticle spectrum remains an open question. Here, we present the spectroscopic signature of such an interaction in a Hund metal candidate MnSi exhibiting weak ferromagnetism. Our photoemission measurements reveal renormalized quasiparticle bands near the Fermi level with strong momentum dependence: The ferromagnetism manifests through possibly exchange-split bands (Q1) below T C , while the spin/orbital screenings lead to the gradual development of quasiparticles (Q2) upon cooling. Our results demonstrate how the characteristic spin/orbital coherence in a Hund metal could coexist and compete with the magnetic order to form a weak itinerant ferromagnet, via quasiparticle bands that are well separated in momentum space and exhibit distinct temperature dependence. Here, our results imply that the competition between the spin/orbital screening and the magnetic order in a Hund metal bears interesting similarities to the Kondo lattice systems

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High‐Efficiency Magnon‐Mediated Magnetization Switching in All‐Oxide Heterostructures with Perpendicular Magnetic Anisotropy

Abstract The search for efficient approaches to realize local switching of magnetic moments in spintronic devices has attracted extensive attention. One of the most promising approaches is the electrical manipulation of magnetization through electron‐mediated spin torque. However, the Joule heat generated via electron motion unavoidably causes substantial energy dissipation and potential damage to spintronic devices. Here, all‐oxide heterostructures of SrRuO 3 /NiO/SrIrO 3 are epitaxially grown on SrTiO 3 single‐crystal substrates following the order of the ferromagnetic transition metal oxide SrRuO 3 with perpendicular magnetic anisotropy, insulating and antiferromagnetic NiO, and metallic transition metal oxide SrIrO 3 with strong spin–orbit coupling. It is demonstrated that instead of the electron spin torques, the magnon torques present in the antiferromagnetic NiO layer can directly manipulate the perpendicular magnetization of the ferromagnetic layer. This magnon mechanism may significantly reduce the electron motion‐related energy dissipation from electron‐mediated spin currents. Interestingly, the threshold current density to generate a sufficient magnon current to manipulate the magnetization is one order of magnitude smaller than that in conventional metallic systems. These findings suggest a route for developing highly efficient all‐oxide spintronic devices operated by magnon current.

Zheng, Dongxing↗

Evidence of Magnon-Mediated Orbital Magnetism in a Quasi-2D Topological Magnon Insulator

Here, we explore spin dynamics in Cu(1,3-bdc), a quasi-2D topological magnon insulator. The results show that the thermal evolution of the Landé $\textit{g}$ factor ($\textit{g}$) is anisotropic: $g_{\text{in-plane}}$ decreases while $g_{\text{out-of-plane}}$ increases with increasing temperature $\textit{T}$. Moreover, the anisotropy of the $\textit{g}$ factor (Δ$\textit{g}$) and the anisotropy of saturation magnetization ($ΔM_s$) are correlated below 4 K, but they diverge above 4 K. We show that the electronic orbital moment contributes to the g anisotropy at lower $\textit{T}$, while the topological orbital moment induced by thermally excited spin chirality dictates the g anisotropy at higher $\textit{T}$. Our work suggests an interplay among topology, spin chirality, and orbital magnetism in Cu(1,3-bdc).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tunable Magnetically Induced Transparency Spectra in Magnon-Magnon Coupled Y 3 Fe 5 O 12 / Permalloy Bilayers

Hybrid magnonic systems host a variety of characteristic phenomena such as the magnetically induced transparency (MIT) and Purcell effect, which are considered useful for future coherent quantuminformation processing. In this work, we experimentally demonstrate a tunable MIT effect in the Y 3 Fe 5 O 12 (YIG)/Permalloy(Py) magnon-magnon coupled system via changing the magnetic field orientations. By probing the magneto-optic effects of Py and YIG thin films, we identify clear features of MIT spectra induced by the mode hybridization between the uniform mode of Py and the perpendicular standing spin-wave modes of YIG. By changing the external magnetic field orientations, we observe a tunable coupling strength between the YIG's spin-wave modes and the Py's uniform mode, upon the application of an out-of-plane magnetic field. This observation is theoretically interpreted by a geometrical consideration of the Py and YIG magnetization under the oblique magnetic field even at a constant interfacial exchange coupling. Finally, our findings show high promise for investigating tunable coherent phenomena with hybrid magnonic platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploratory study reveals far reaching systemic and cellular effects of verapamil treatment in subjects with type 1 diabetes

Currently, no oral medications are available for type 1 diabetes (T1D). While our recent randomized placebo-controlled T1D trial revealed that oral verapamil had short-term beneficial effects, their duration and underlying mechanisms remained elusive. Now, our global T1D serum proteomics analysis identified chromogranin A (CHGA), a T1D-autoantigen, as the top protein altered by verapamil and as a potential therapeutic marker and revealed that verapamil normalizes serum CHGA levels and reverses T1D-induced elevations in circulating proinflammatory T-follicular-helper cell markers. RNA-sequencing further confirmed that verapamil regulates the thioredoxin system and promotes an anti-oxidative, anti-apoptotic and immunomodulatory gene expression profile in human islets. Moreover, continuous use of oral verapamil delayed T1D progression, promoted endogenous beta-cell function and lowered insulin requirements and serum CHGA levels for at least 2 years and these benefits were lost upon discontinuation. Thus, the current studies provide crucial mechanistic and clinical insight into the beneficial effects of verapamil in T1D.

60 APPLIED LIFE SCIENCES↗

Direct Observation of Modulated Radical Spin States in Metal–Organic Frameworks by Controlled Flexibility

Owing to their switchable spin states and dynamic electronic character, organic-based radical species have been invoked in phenomena unique to a variety of fields. When incorporated in solid state materials, generation of organic radicals proves challenging due to aggregation. Metal–organic frameworks (MOFs) are promising candidates for immobilization and stabilization of organic radicals because of the tunable spatial arrangement of organic linkers and metal nodes, which sequesters the reactive species. Herein, a flexible, redox-active tetracarboxylic acid linker bearing two imidazole units was chosen to construct a new Zr 6 -MOF, NU-910, with scu topology. By exploiting the structural flexibility of NU-910, we successfully modulate the dynamics between an isolated organic radical species and an organic radical π-dimer species in the MOF system. Single-crystal X-ray diffraction analysis reveals that through solvent exchange from N,N-diethylformamide to acetone, NU-910 undergoes a structural contraction with interlinker distances decreasing from 8.32 Å to 3.20 Å at 100 K. Organic radical species on the bridging linkers are generated via UV light irradiation. Direct observation of temperature-induced spin switches from an isolated radical species to a magnetically silent radical π-dimer in NU-910 after irradiation in the solid state was achieved via variable-temperature single-crystal X-ray diffraction and variable-temperature electron paramagnetic resonance spectroscopy. Ultraviolet–visible–near infrared spectroscopy and density functional theory calculations further substantiated the formation of a radical cation π-dimer upon irradiation. As a result, this work demonstrates the potential of using flexible MOFs as a platform to modulate radical spin states in the solid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reticular Chemistry for Highly Porous Metal–Organic Frameworks: The Chemistry and Applications

Current global crises related to clean energy and the environment entail the development of materials that are capable of addressing these challenges. Metal–organic frameworks (MOFs), a class of functional materials assembled from metal-containing nodes and organic ligands via coordination bonds, have been successfully developed for various applications, including catalysis, toxic chemical removal, and gas storage and separation, as a result of their highly tailorable nature and precisely engineered pore structures. In particular, the exceptionally high surface areas and porosities of MOFs are two of their most attractive characteristics and place them among the best porous materials for the storage of clean energy gases, such as hydrogen and methane. Reticular chemistry stands out as a prominent approach to the design of MOFs as this strategy allows for the rational top-down design of frameworks guided by topological nets to afford extended framework structures with precise architectural arrangements at the molecular level. Furthermore, bridging the gap between reticular chemistry design strategies and highly porous MOFs can facilitate the development of next-generation high-performance materials through state-of-the-art chemical design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Are you using the right probe molecules for assessing the textural properties of metal–organic frameworks?

Textural properties—such as the surface area, pore size distribution, and pore volume—are at the forefront of characterization for porous materials. Therefore, it is essential to accurately and reproducibly report a material's textural properties as they could ultimately dictate its applicability. This work aims to provide insightful and comprehensive studies of textural properties for a set of metal–organic frameworks (MOFs), a class of porous materials, using various gases to equip researchers in the field with a helpful guide and reference. Here, we selected a series of nine MOFs with different surface areas, pore sizes, shapes, and chemical environments to represent a wide range of materials. We probed the textural properties of these MOFs using traditional and distinctive gases: N 2 , Kr and O 2 at 77 K, Ar at 87 K, and CO 2 at 195 and 273 K. With regard to surface area, we discuss the validity and challenges associated with the current BET method, the importance of utilizing the Rouquerol et al. consistency criteria to ensure accuracy and reproducibility, and the recommended gas probes for certain materials. For pore size distribution, we discuss the efficacy of each probe for determining the pore sizes within a porous material relative to the calculated distribution from its crystal structure, the limitations of current computational kernels used to calculate pore size distributions, and the need for advanced kernels to envelope the diversity of porous materials. Finally, for pore volume, we discuss the use of the Gurvich rule to obtain the total pore volume in comparison with calculated values from crystal structures and its consistency as a metric for porous materials. Ultimately, we hope that this article will aid researchers in characterizing the textural properties of porous materials and encourage the development of new kernels capable of encompassing the complexity of MOFs and other porous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing nano-scale lattice distortions in implanted material with 3D Bragg ptychography

Small ion-irradiation-induced defects can dramatically alter material properties and speed up degradation. Unfortunately, most of the defects irradiation creates are below the visibility limit of state-of-the-art microscopy. As such, our understanding of their impact is largely based on simulations with major unknowns. Here we present an x-ray crystalline microscopy approach, able to image with high sensitivity, nano-scale 3D resolution and extended field of view, the lattice strains and tilts in crystalline materials. Using this enhanced Bragg ptychography tool, we study the damage helium-ion-irradiation produces in tungsten, revealing a series of crystalline details in the 3D sample. Our results lead to the conclusions that few-atom-large ‘invisible’ defects are likely isotropic in orientation and homogeneously distributed. A partially defect-denuded region is observed close to a grain boundary. These findings open up exciting perspectives for the modelling of irradiation damage and the detailed analysis of crystalline properties in complex materials.

42 ENGINEERING↗

Discovery of spontaneous de-interpenetration through charged point-point repulsions

Entanglement is an energetically favorable occurrence, pervasive in both nature and synthetic systems, where networks prefer to entwine with one another rather than remain open and accessible. As a result of entanglement, valuable internal pore space, useful for applications such as catalysis, storage, and sensing, is lost. Here, we detail our discovery of a phenomenon termed “charged point-point repulsion,” which energetically favors dis-entanglement, transforming a densely packed uranium-based framework with 14.2 and 19.8 Å pores into an open material with 40.7 Å pores and record-high void fraction and pore volume. We anticipate that the phenomenon described in this work could be widely generalized for the direct and systematic production of non-entangled structures with an abundance of valuable pore space and far-reaching practical importance. More fundamentally, this study compels a re-evaluation of the thermodynamics of porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial electron-phonon coupling and quantum confinement in ultrathin Yb films on graphite

Interfacial electron-phonon coupling in ultrathin films has attracted much interest recently. Here, by combining angle-resolved photoemission spectroscopy and scanning tunneling microscopy, we report quantized electronic states and strong interfacial electron-phonon coupling in ultrathin Yb films on graphite. We observed clear kinks in the energy-momentum dispersion of quantum well states, and the kink positions agree well with the energies of optical phonons of graphite. The extracted coupling strength λ is largest for the thinnest film with a preferred (“magic”) thickness of four monolayers and exhibits a strong band dependence, which can be qualitatively accounted for by a simple model. The interfacial electron-phonon coupling also gives rise to characteristic steplike structures in the $dI/dV$ spectra, implying dominant coupling with the phonons with zero in-plane momentum. A Lifshitz transition occurs at higher coverage, where quantum well states derived mainly from 5d electrons dominate near the Fermi level and possess large effective mass (up to ~ 19 m e ). Here our results highlight the potentially important role of interfacial electron-phonon interaction for ultrathin films and provide spectroscopic insight to understand this cross-interface fermion-boson interaction.

36 MATERIALS SCIENCE↗

Magnetism and spin dynamics in room-temperature van der Waals magnet Fe 5 GeTe 2

Two-dimensional van der Waals (vdWs) materials have gathered a lot of attention recently. However, the majority of these materials have Curie temperatures that are well below room temperature, making it challenging to incorporate them into device applications. In this work, we synthesized a room-temperature vdW magnetic crystal Fe 5 GeTe 2 with a Curie temperature T c = 332 K, and studied its magnetic properties by vibrating sample magnetometry (VSM) and broadband ferromagnetic resonance (FMR) spectroscopy. The experiments were performed with external magnetic fields applied along the c -axis (H∥ c ) and the ab -plane (H∥ ab ), with temperatures ranging from 300 to 10 K. We have found a sizable Landé g -factor difference between the H∥ c and H∥ ab cases. In both cases, the Landé g -factor values deviated from g = 2. This indicates contribution of orbital angular momentum to the magnetic moment. The FMR measurements reveal that Fe 5 GeTe 2 has a damping constant comparable to Permalloy. With reducing temperature, the linewidth was broadened. Together with the VSM data, our measurements indicate that Fe 5 GeTe 2 transitions from ferromagnetic to ferrimagnetic at lower temperatures. Our experiments highlight key information regarding the magnetic state and spin scattering processes in Fe 5 GeTe 2 , which promote the understanding of magnetism in Fe 5 GeTe 2 , leading to implementations of Fe 5 GeTe 2 based room-temperature spintronic devices.

36 MATERIALS SCIENCE↗

Giant Topological Hall Effect in van der Waals Heterostructures of CrTe 2 /Bi 2 Te 3

Discoveries of the interfacial topological Hall effect (THE) provide an ideal platform for exploring the physics arising from the interplay between topology and magnetism. The interfacial topological Hall effect is closely related to the Dzyaloshinskii-Moriya interaction (DMI) at an interface and topological spin textures. However, it is difficult to achieve a sizable THE in heterostructures due to the stringent constraints on the constituents of THE heterostructures, such as strong spin-orbit coupling (SOC). Here, we report the observation of a giant THE signal of 1.39 mu Omega.cm in the van der Waals heterostructures of CrTe 2 /Bi 2 Te 3 fabricated by molecular beam epitaxy, a prototype of two-dimensional (2D) ferromagnet (FM)/topological insulator (TI). This large magnitude of THE is attributed to an optimized combination of 2D ferromagnetism in CrTe 2 , strong SOC in Bi 2 Te 3 , and an atomically sharp interface. Furthermore, our work reveals CrTe 2 /Bi 2 Te 3 as a convenient platform for achieving large interfacial THE in hybrid systems, which could be utilized to develop quantum science and high-density information storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗