Search NASA⌕ Search

Engineering topics

Li, Peng

Publications and source records attributed to Li, Peng.

At least 109 records · Page 6

Controllable synthesis of ultra-long YCexOy:Eu3+ nanowire arrays and fluorescence activation of Ce3+

Highlights: • Ultra-long YCe{sub x}O{sub y}:Eu{sup 3+} nanowire arrays is realized by controllable synthesis. • Ce{sup 3+} ion dominates the fluorescence activation in YCe{sub x}O{sub y}:Eu{sup 3+} nanowire arrays. • Fluorescence emission in red light area is useful in medical image or cell labeling. - Abstract: Ultra-long YCe{sub x}O{sub y}:Eu{sup 3+} nanowire arrays(NWAs) have been synthesized in anodic aluminum oxide (AAO) templates by chemical co-deposition at negative pressure suction, which are amorphous, and possess precise dimension and homogeneous morphologies. The SEM, TEM, XRD and EDS were employed to investigate the morphology, structure and elemental composition of YCe{sub x}O{sub y}:Eu{sup 3+} NWAs. The fluorescence properties of the YCe{sub x}O{sub y}:Eu{sup 3+} NWAs were measured by fluorescence spectrometer (PerkinElmer LS-55) using Xenon discharge lamp as the excitation light source. There are two emission peaks at 615 nm and 702 nm with excitation wavelength of 394 nm, which corresponds to the {sup 5}D{sub 0}-{sup 2}F{sub 2} and {sup 5}D{sub 0}-{sup 7}F{sub 4} energy level transition of Eu{sup 3+}, respectively. The fluorescence intensity of YCe{sub x}O{sub y}:Eu{sup 3+} NWAs is related to the doping concentration of Eu{sup 3+} ion, which reaches a maximum with doping concentration of Eu{sup 3+} at 8%, and remarkably decreases at higher concentrations. Ce{sup 3+} ion dominates the fluorescence activation in YCe{sub x}O{sub y}:Eu{sup 3+} NWAs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

99 TcO 4 - remediation by a cationic polymeric network

Direct removal of 99 TcO 4 - from the highly acidic solution of used nuclear fuel is highly beneficial for the recovery of uranium and plutonium and more importantly aids in the elimination of 99 Tc discharge into the environment. However, this task represents a huge challenge given the combined extreme conditions of super acidity, high ionic strength, and strong radiation field. Here in this paper we overcome this challenge using a cationic polymeric network with significant TcO 4 - uptake capabilities in four aspects: the fastest sorption kinetics, the highest sorption capacity, the most promising uptake performance from highly acidic solutions, and excellent radiation-resistance and hydrolytic stability among all anion sorbent materials reported. In addition, this material is fully recyclable for multiple sorption/desorption trials, making it extremely attractive for waste partitioning and emergency remediation. The excellent TcO 4 - uptake capability is elucidated by X-ray absorption spectroscopy, solidstate NMR measurement, and density functional theory analysis on anion coordination and bonding.

36 MATERIALS SCIENCE↗

Hierarchically Engineered Mesoporous Metal-Organic Frameworks toward Cell-free Immobilized Enzyme Systems

Highly efficient cell-free enzymatic systems are typically difficult to achieve in traditional immobilized enzyme systems because of the lack of optimal spatial control of enzyme localization, substrate and product diffusion, and enzyme and coenzyme accessibility. Here, we report a strategy for expanding the pore apertures (from 3.3 to 6.7 nm) of a series of Zr-based metallic-organic frameworks (MOFs) (termed NU-100x, x = 3, 4, 5, 6, 7) with interconnected hierarchical pores by maintaining precise control of torsional angles associated with the linkers. As a proof of concept, we use the expanded NU-100x MOF structures to encapsulate lactate dehydrogenase (LDH) and demonstrate the use of the captured protein in a cell-free biosynthetic catalytic system. Remarkably, LDH immobilized in the large pores of the MOF is accessible to nicotinamide adenine dinucleotide coenzymes (NAD and NADH), allowing for in situ coenzyme regeneration leading to higher activity than that of the free enzyme.

Li, Peng↗

Robust Operation of Soft Open Points in Active Distribution Networks with High Penetration of Photovoltaic Integration

Distributed generators (DGs) including photovoltaic panels (PVs) have been integrated dramatically in active distribution networks (ADNs). Due to the strong volatility and uncertainty, the high penetration of PV generation immensely exacerbates the conditions of voltage violation in ADNs. However, the emerging flexible interconnection technology based on soft open points (SOPs) provides increased controllability and flexibility to the system operation. For fully exploiting the regulation ability of SOPs to address the problems caused by PV, this paper proposes a robust optimization method to achieve the robust optimal operation of SOPs in ADNs. A two-stage adjustable robust optimization model is built to tackle the uncertainties of PV outputs, in which robust operation strategies of SOPs are generated to eliminate the voltage violations and reduce the power losses of ADNs. A column-and-constraint generation (C&CG) algorithm is developed to solve the proposed robust optimization model, which are formulated as second-order cone program (SOCP) to facilitate the accuracy and computation efficiency. Here, case studies on the modified IEEE 33-node system and comparisons with the deterministic optimization approach are conducted to verify the effectiveness and robustness of the proposed method.

14 SOLAR ENERGY↗

RIP2 deficiency attenuates cardiac hypertrophy, inflammation and fibrosis in pressure overload induced mice

Although the pathological cardiac hypertrophy presents a leading cause of morbidity and mortality worldwide, our knowledge of the molecular mechanisms underlying the disease is still poor. Here, we reported that receptor-interacting serine/threonine-protein kinase 2 (RIP2), promoting pro-inflammatory gene expression, enhanced the pathological cardiac hypertrophy in animals. The effects of RIP2 on the cardiac hypertrophy triggered by pathological stimuli have not been fully investigated. In our study, mice were subjected to aortic banding (AB) surgery to explore the pathological, echocardiographic and molecular mechanisms. RIP2 expressed highly in cardiomyocytes after AB operation in wild type (WT) mice. RIP2-knockout (KO) attenuated cardiac hypertrophy, inflammation and fibrosis in mice 4 weeks after AB-surgery. First, RIP2 knockout down-regulated hypertrophic markers of atrial natriuretic peptide (ANP), brain natriuretic peptide (BNP) and β-myosin heavy chain (β-MHC) in the heart of AB-operated mice.in addition, RIP2-deficiency reduced toll-like receptor 4/myeloid differentiation factor 88/nuclear factor kappa B (TLR4/MyD88/NF-κB) activation, mitogen-activated protein kinases (MAPKs) phosphorylation and transforming growth factor-β1 (TGF-β1)/SMADs expressions, contributing to the suppression of inflammatory response and fibrosis, as further evidenced by down-regulated pro-inflammatory cytokines, including Tumor necrosis factor-α (TNF-α), interleukin (IL)-1β, IL-6 and IL-18, as well as fibrosis markers of Collagen I, Collagen III and α-smooth muscle actin (α-SMA). Taken together, our data indicated that RIP2-deficience ameliorated cardiac hypertrophy, inflammation and fibrosis through modulating multiple signaling pathways. - Highlights: • Overexpression of RIP2 contributed to development of hypertrophic heart. • RIP2-knockout attenuates cardiac injury and dysfunction in hypertrophic heart. • RIP2-deficience alleviates inflammation in heart of hypertrophic mice. • RIP2-deletion inhibits fibrosis in the heart of hypertrophic mice.

60 APPLIED LIFE SCIENCES↗

An enhanced SOCP-based method for feeder load balancing using the multi-terminal soft open point in active distribution networks

The integration of distributed generators (DGs) exacerbates the feeder power flow fluctuation and load unbalanced condition in active distribution networks (ADNs). The unbalanced feeder load causes inefficient use of network assets and network congestion during system operation. The flexible interconnection based on the multi-terminal soft open point (SOP) significantly benefits the operation of ADNs. The multi-terminal SOP, which is a controllable power electronic device installed to replace the normally open point, provides accurate active and reactive power flow control to enable the flexible connection of feeders. An enhanced SOCP-based method for feeder load balancing using the multi-terminal SOP is proposed in this paper. Furthermore, by regulating the operation of the multi-terminal SOP, the proposed method can mitigate the unbalanced condition of feeder load and simultaneously reduce the power losses of ADNs. Then, the original non-convex model is converted into a second-order cone programming (SOCP) model using convex relaxation. In order to tighten the SOCP relaxation and improve the computation efficiency, an enhanced SOCP-based approach is developed to solve the proposed model. Finally, case studies are performed on the modified IEEE 33-node system to verify the effectiveness and efficiency of the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Development of a New Structural Class of Broadly Acting HCV Non-Nucleoside Inhibitors Leading to the Discovery of MK-8876

Studies directed at developing a broadly acting non-nucleoside inhibitor of HCV NS5B led to the discovery of a novel structural class of 5-aryl benzofurans that simultaneously interact with both the palm I and palm II binding regions. An initial candidate was potent in vitro against HCV GT1a and GT1b replicons, and induced multi-log reductions in HCV viral load when orally dosed to chronic GT1 infected chimpanzees. However, in vitro potency losses against clinically relevant GT1a variants prompted a further effort to develop compounds with sustained potency across a broader array of HCV genotypes and mutants. Ultimately, a biology and medicinal chemistry collaboration led to the discovery of the development candidate MK-8876. MK-8876 demonstrated a pan-genotypic potency profile and maintained potency against clinically relevant mutants. It demonstrated moderate bioavailability in rats and dogs, but showed low plasma clearance characteristics consistent with once-daily dosing. Herein we describe the efforts which led to the discovery of MK-8876, which advanced into Phase 1 monotherapy studies for evaluation and characterization as a component of an all-oral direct-acting drug regimen for the treatment of chronic HCV infection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of a catalytically accessible polyoxometalate in a mesoporous channel-type metal–organic framework

A Keggin-type polyoxometalate (H 3 PW 12 O 40 ) was incorporated into a mesoporous Zr-based MOF (NU-1000) via an impregnation method in aqueous media, resulting in the hybrid material, PW 12 @NU-1000. The POM@MOF composite was characterized by a suite of physical methods, indicating the retention of crystallinity and high porosity of the parent MOF. The hybrid material was also stable to leaching in aqueous media at varying pH. Lastly, the material was tested as a heterogeneous catalyst for the oxidation of 2-chloroethyl ethyl sulfide using hydrogen peroxide as the oxidant. PW 12 @NU-1000 was shown to have a higher catalytic activity than either of the individual constituents alone.

36 MATERIALS SCIENCE↗

Role of Modulators in Controlling the Colloidal Stability and Polydispersity of the UiO-66 Metal–Organic Framework

We report nanoscale UiO-66 Zr 6 (OH) 4 O 4 (C 8 O 4 H 4 ) 6 has been synthesized with a series of carboxylic acid modulators, R-COOH (where R = H, CH 3 , CF 3 , and CHCl 2 ). The phase purity and size of each MOF was confirmed by powder X-ray diffraction, BET surface area analysis, and scanning transmission electron microscopy (STEM). Size control of UiO-66 crystals from 20 nm to over 1 μm was achieved, and confirmed by STEM. The colloidal stability of each MOF was evaluated by dynamic light scattering and was found to be highly dependent on the modulator conditions utilized in the synthesis, with both lower pKa and higher acid concentration resulting in more stable structures. Furthermore, STEM was carried out on both colloidally stable samples and those that exhibited a large degree of aggregation, which allowed for visualization of the different degrees of dispersion of the samples. The use of modulators at higher concentrations and with lower pKas leads to the formation of more defects, as a consequence of terephthalic acid ligands being replaced by modulator molecules, thereby enhancing the colloidal stability of the UiO-66 nanoparticles. These findings could have a significant impact on nanoscale MOF material syntheses and applications, especially in the areas of catalysis and drug delivery.

36 MATERIALS SCIENCE↗

Coordinated Control Method of Voltage and Reactive Power for Active Distribution Networks Based on Soft Open Point

The increasing penetration of distributed generators (DGs) exacerbates the risk of voltage violations in active distribution networks (ADNs). The conventional voltage regulation devices limited by the physical constraints are difficult to meet the requirement of real-time voltage and VAR control (VVC) with high precision when DGs fluctuate frequently. But, soft open point (SOP), a flexible power electronic device, can be used as the continuous reactive power source to realize the fast voltage regulation. Considering the cooperation of SOP and multiple regulation devices, this paper proposes a coordinated VVC method based on SOP for ADNs. Firstly, a time-series model of coordi-nated VVC is developed to minimize operation costs and eliminate voltage violations of ADNs. Then, by applying the linearization and conic relaxation, the original nonconvex mixed-integer non-linear optimization model is converted into a mixed-integer second-order cone programming (MISOCP) model which can be efficiently solved to meet the requirement of voltage regulation rapidity. Here, we carried out some case studies on the IEEE 33-node system and IEEE 123-node system to illustrate the effectiveness of the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Insights into Supramolecular Sites Responsible for Complete Separation of Biomass-Derived Phenolics and Glucose in Metal–Organic Framework NU-1000

The molecular origins of adsorption of lignin-derived phenolics to metal–organic framework NU-1000 are investigated from aqueous solution as well as in competitive mode with glucose present in the same aqueous mixture. A comparison of adsorption equilibrium constants ($K_{ads}$) for phenolics functionalized with either carboxylic acid or aldehyde substituents demonstrated only a slight increase (less than a factor of 6) for the former according to both experiments and calculations. This small difference in $K_{ads}$ between aldehyde and carboxylic-acid substituted adsorbates is consistent with the pyrene unit of NU-1000 as the adsorption site, rather than the zirconia nodes, while at saturation coverage, the adsorption capacity suggests multiple guests per pyrene. Experimental standard free energies of adsorption directly correlated with the molecular size and electronic structure calculations confirmed this direct relationship, with the pyrene units as adsorption site. The underlying origins of this relationship are grounded in noncovalent $π–π$ interactions as being responsible for adsorption, the same interactions present in the condensed phase of the phenolics, which to a large extent govern their heat of vaporization. Thus, NU-1000 acts as a preformed aromatic cavity for driving aromatic guest adsorption from aqueous solution and does so specifically without causing detectable glucose adsorption from aqueous solution, thereby achieving complete glucose–phenolics separations. The reusability of NU-1000 during an adsorption/desorption cycle was good, even with some of the phenolic compounds with greatest affinity not easiliy removed with water and ethanol washes at room temperature. A competitive adsorption experiment gave an upper bound for $K_{ads}$ for glucose of at most 0.18 M –1 , which can be compared with $K_{ads}$ for the phenolics investigated here, which fell in the range of 443–42 639 M –1 . The actual value of $K_{ads}$ for glucose may be much closer to zero given the lack of observed glucose uptake with NU-1000 as adsorbent.

09 BIOMASS FUELS↗