Search NASA⌕ Search

Engineering topics

Li, Po-E

Publications and source records attributed to Li, Po-E.

At least 19 records

Recommendations for Uniform Variant Calling of SARS-CoV-2 Genome Sequence across Bioinformatic Workflows

Genomic sequencing of clinical samples to identify emerging variants of SARS-CoV-2 has been a key public health tool for curbing the spread of the virus. As a result, an unprecedented number of SARS-CoV-2 genomes were sequenced during the COVID-19 pandemic, which allowed for rapid identification of genetic variants, enabling the timely design and testing of therapies and deployment of new vaccine formulations to combat the new variants. However, despite the technological advances of deep sequencing, the analysis of the raw sequence data generated globally is neither standardized nor consistent, leading to vastly disparate sequences that may impact identification of variants. Here, we show that for both Illumina and Oxford Nanopore sequencing platforms, downstream bioinformatic protocols used by industry, government, and academic groups resulted in different virus sequences from same sample. These bioinformatic workflows produced consensus genomes with differences in single nucleotide polymorphisms, inclusion and exclusion of insertions, and/or deletions, despite using the same raw sequence as input datasets. Here, we compared and characterized such discrepancies and propose a specific suite of parameters and protocols that should be adopted across the field. Consistent results from bioinformatic workflows are fundamental to SARS-CoV-2 and future pathogen surveillance efforts, including pandemic preparation, to allow for a data-driven and timely public health response.

60 APPLIED LIFE SCIENCES↗

Comparing variability in diagnosis of upper respiratory tract infections in patients using syndromic, next generation sequencing, and PCR-based methods

Early and accurate diagnosis of respiratory pathogens and associated outbreaks can allow for the control of spread, epidemiological modeling, targeted treatment, and decision making–as is evident with the current COVID-19 pandemic. Many respiratory infections share common symptoms, making them difficult to diagnose using only syndromic presentation. Yet, with delays in getting reference laboratory tests and limited availability and poor sensitivity of point-of-care tests, syndromic diagnosis is the most-relied upon method in clinical practice today. Here, we examine the variability in diagnostic identification of respiratory infections during the annual infection cycle in northern New Mexico, by comparing syndromic diagnostics with polymerase chain reaction (PCR) and sequencing-based methods, with the goal of assessing gaps in our current ability to identify respiratory pathogens. Of 97 individuals that presented with symptoms of respiratory infection, only 23 were positive for at least one RNA virus, as confirmed by sequencing. Whereas influenza virus (n = 7) was expected during this infection cycle, we also observed coronavirus (n = 7), respiratory syncytial virus (n = 8), parainfluenza virus (n = 4), and human metapneumovirus (n = 1) in individuals with respiratory infection symptoms. Four patients were coinfected with two viruses. In 21 individuals that tested positive using PCR, RNA sequencing completely matched in only 12 (57%) of these individuals. Few individuals (37.1%) were diagnosed to have an upper respiratory tract infection or viral syndrome by syndromic diagnostics, and the type of virus could only be distinguished in one patient. Thus, current syndromic diagnostic approaches fail to accurately identify respiratory pathogens associated with infection and are not suited to capture emerging threats in an accurate fashion. We conclude there is a critical and urgent need for layered agnostic diagnostics to track known and unknown pathogens at the point of care to control future outbreaks.

60 APPLIED LIFE SCIENCES↗

EDGE COVID-19: a web platform to generate submission-ready genomes from SARS-CoV-2 sequencing efforts

Abstract Summary Genomics has become an essential technology for surveilling emerging infectious disease outbreaks. A range of technologies and strategies for pathogen genome enrichment and sequencing are being used by laboratories worldwide, together with different and sometimes ad hoc, analytical procedures for generating genome sequences. A fully integrated analytical process for raw sequence to consensus genome determination, suited to outbreaks such as the ongoing COVID-19 pandemic, is critical to provide a solid genomic basis for epidemiological analyses and well-informed decision making. We have developed a web-based platform and integrated bioinformatic workflows that help to provide consistent high-quality analysis of SARS-CoV-2 sequencing data generated with either the Illumina or Oxford Nanopore Technologies (ONT). Using an intuitive web-based interface, this workflow automates data quality control, SARS-CoV-2 reference-based genome variant and consensus calling, lineage determination and provides the ability to submit the consensus sequence and necessary metadata to GenBank, GISAID and INSDC raw data repositories. We tested workflow usability using real world data and validated the accuracy of variant and lineage analysis using several test datasets, and further performed detailed comparisons with results from the COVID-19 Galaxy Project workflow. Our analyses indicate that EC-19 workflows generate high-quality SARS-CoV-2 genomes. Finally, we share a perspective on patterns and impact observed with Illumina versus ONT technologies on workflow congruence and differences. Availability and implementation https://edge-covid19.edgebioinformatics.org, and https://github.com/LANL-Bioinformatics/EDGE/tree/SARS-CoV2. Supplementary information Supplementary data are available at Bioinformatics online.

59 BASIC BIOLOGICAL SCIENCES↗

Using Deep Mutational Data and Machine Learning to Guide Outbreak and Pandemic Response

A significant fraction of pathogens known to infect humans originate in non-human (zoonotic) hosts (Taylor, Latham, and Woolhouse 2001), and new and emerging pathogens continue to spill over into the human population more frequently at an alarming rate (e.g., SARS, MERS, Cholera, etc.). The recent outbreaks of Ebola virus in West Africa and the ongoing SARS-CoV-2 pandemic demonstrate the need for rapid and reliable assessments of viral phenotype information to help inform scientists and policy makers how best to control the spread of disease. Further understanding of the virus pathogenic evolutionary space and potential trajectory could guide appropriate control measures to limit the spread of a new virus throughout the local and global human population.

59 BASIC BIOLOGICAL SCIENCES↗

Challenges in Bioinformatics Workflows for Processing Microbiome Omics Data at Scale

The nascent field of microbiome science is transitioning from a descriptive approach of cataloging taxa and functions present in an environment to applying multi-omics methods to investigate microbiome dynamics and function. A large number of new tools and algorithms have been designed and used for very specific purposes on samples collected by individual investigators or groups. While these developments have been quite instructive, the ability to compare microbiome data generated by many groups of researchers is impeded by the lack of standardized application of bioinformatics methods. Additionally, there are few examples of broad bioinformatics workflows that can process metagenome, metatranscriptome, metaproteome and metabolomic data at scale, and no central hub that allows processing, or provides varied omics data that are findable, accessible, interoperable and reusable (FAIR). Here, we review some of the challenges that exist in analyzing omics data within the microbiome research sphere, and provide context on how the National Microbiome Data Collaborative has adopted a standardized and open access approach to address such challenges.

NMDC, Microbiome↗

The National Microbiome Data Collaborative: Enabling Microbiome Science

To harness the potential of microbiome science across the broad range of relevant disciplines, new approaches to data infrastructure and transdisciplinary collaboration are necessary. The National Microbiome Data Collaborative (NMDC) is a new initiative to support microbiome data exploration and discovery through a collaborative integrative data science ecosystem.

Wood-Charlson, Elisha M.↗

EDGE Bioinformatics

This report gives an overview of Empowering the Development of Genomics Expertise (EDGE) Bioinformatics software.

59 BASIC BIOLOGICAL SCIENCES↗

Enabling the democratization of the genomics revolution with a fully integrated web-based bioinformatics platform, Version 1.5 and 1.x.

EDGE bioinformatics was developed to help biologists process Next Generation Sequencing data (in the form of raw FASTQ files), even if they have little to no bioinformatics expertise. EDGE is a highly integrated and interactive web-based platform that is capable of running many of the standard analyses that biologists require for viral, bacterial/archaeal, and metagenomic samples. EDGE provides the following analytical workflows: quality trimming and host removal, assembly and annotation, comparisons against known references, taxonomy classification of reads and contigs, whole genome SNP-based phylogenetic analysis, and PCR analysis. EDGE provides an intuitive web-based interface for user input, allows users to visualize and interact with selected results (e.g. JBrowse genome browser), and generates a final detailed PDF report. Results in the form of tables, text files, graphic files, and PDFs can be downloaded. A user management system allows tracking of an individual’s EDGE runs, along with the ability to share, post publicly, delete, or archive their results.

Chain, Patrick↗

Enabling the democratization of the genomics revolution with a fully integrated web-based bioinformatics platform, Version 1.5 and 1.x.

EDGE bioinformatics was developed to help biologists process Next Generation Sequencing data (in the form of raw FASTQ files), even if they have little to no bioinformatics expertise. EDGE is a highly integrated and interactive web-based platform that is capable of running many of the standard analyses that biologists require for viral, bacterial/archaeal, and metagenomic samples. EDGE provides the following analytical workflows: quality trimming and host removal, assembly and annotation, comparisons against known references, taxonomy classification of reads and contigs, whole genome SNP-based phylogenetic analysis, and PCR analysis. EDGE provides an intuitive web-based interface for user input, allows users to visualize and interact with selected results (e.g. JBrowse genome browser), and generates a final detailed PDF report. Results in the form of tables, text files, graphic files, and PDFs can be downloaded. A user management system allows tracking of an individual’s EDGE runs, along with the ability to share, post publicly, delete, or archive their results.

Chain, Patrick↗

EDGE 2017 R&D 100 Entry with Appendix

Diabetes, infertility, cancer, and Alzheimer’s disease—the key to one day preventing or even curing such afflictions and diseases (both infectious and genetically driven) may be locked in our own genetic code and the code of microorganisms that inhabit our bodies. The study of this code, known as genomics, has recently become much more promising as a result of two things: (1) vast improvements in high-throughput, nextgeneration sequencing (NSG), and (2) an exponential decrease in the cost of such sequencing. For example, it originally cost approximately $3 billion to sequence the human genome; today, this genome could be resequenced for less than $1,000.

59 BASIC BIOLOGICAL SCIENCES↗

Enabling the democratization of the genomics revolution with a fully integrated web-based bioinformatics platform

Continued advancements in sequencing technologies have fueled the development of new sequencing applications and promise to flood current databases with raw data. A number of factors prevent the seamless and easy use of these data, including the breadth of project goals, the wide array of tools that individually perform fractions of any given analysis, the large number of associated software/hardware dependencies, and the detailed expertise required to perform these analyses. To address these issues, we have developed an intuitive web-based environment with a wide assortment of integrated and cutting-edge bioinformatics tools in pre-configured workflows. These workflows, coupled with the ease of use of the environment, provide even novice next-generation sequencing users with the ability to perform many complex analyses with only a few mouse clicks and, within the context of the same environment, to visualize and further interrogate their results. As a result, this bioinformatics platform is an initial attempt at Empowering the Development of Genomics Expertise (EDGE) in a wide range of applications for microbial research.

59 BASIC BIOLOGICAL SCIENCES↗

ADEPT, a dynamic next generation sequencing data error-detection program with trimming

Illumina is the most widely used next generation sequencing technology and produces millions of short reads that contain errors. These sequencing errors constitute a major problem in applications such as de novo genome assembly, metagenomics analysis and single nucleotide polymorphism discovery. In this study, we present ADEPT, a dynamic error detection method, based on the quality scores of each nucleotide and its neighboring nucleotides, together with their positions within the read and compares this to the position-specific quality score distribution of all bases within the sequencing run. This method greatly improves upon other available methods in terms of the true positive rate of error discovery without affecting the false positive rate, particularly within the middle of reads. We conclude that ADEPT is the only tool to date that dynamically assesses errors within reads by comparing position-specific and neighboring base quality scores with the distribution of quality scores for the dataset being analyzed. The result is a method that is less prone to position-dependent under-prediction, which is one of the most prominent issues in error prediction. The outcome is that ADEPT improves upon prior efforts in identifying true errors, primarily within the middle of reads, while reducing the false positive rate.

59 BASIC BIOLOGICAL SCIENCES↗

Genome Sequence of a Chromium-Reducing Strain, Bacillus cereus S612

We report here the genome sequence of an effective chromium-reducing bacterium, Bacillus cereus strain S612. We found that the size of the draft genome sequence is approximately 5.4 Mb, with a G+C content of 35%, and it is predicted to contain 5,450 protein-coding genes.

54 ENVIRONMENTAL SCIENCES↗

GOTTCHA, Version2

One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions. In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure. During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is first reduced by performing a binary search of the boundary suffixes of the smaller set into the larger set, which defines the limits of the zipper-based intersection process. Rather than recording the actual k-mers of the intersection, another data structure of identical "shape" is created which consists of only bit vectors so that only a 1 or 0 will be stored in the location of the k-mer suffix that was found in the intersection. This reduces the amount of data generated and stored considerably. During the Subtraction phase, relevant intersection bitmasks are first unionized together to form a single bitmask which is then applied over the original genome to reveal only those regions of the genome that are unique. These regions are then exported to disk in FASTA format and used in the application of determining the constituents of an unknown metagenomic community.

Freitas, Tracey↗

GOTTCHA Database, Version 1

One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions.In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure.During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is first reduced by performing a binary search of the boundary suffixes of the smaller set into the larger set, which defines the limits of the zipper-based intersection process. Rather than recording the actual k-mers of the intersection, another data structure of identical "shape" is created which consists of only bit vectors so that only a 1 or 0 will be stored in the location of the k-mer suffix that was found in the intersection. This reduces the amount of data generated and stored considerably.During the Subtraction phase, relevant intersection bitmasks are first unionized together to form a single bitmask which is then applied over the original genome to reveal only those regions of the genome that are unique. These regions are then exported to disk in FASTA format and used in the application of determining the constituents of an unknown metagenomic community.The DATABASE provided is the result of the algorithm described.

Freitas, Tracey↗

GOTTCHA, Version 1

One major challenge in the field of shotgun metagenomics is the accurate identification of the organisms present within the community, based on classification of short sequence reads. Though microbial community profiling methods have emerged to attempt to rapidly classify the millions of reads output from contemporary sequencers, the combination of incomplete databases, similarity among otherwise divergent genomes, and the large volumes of sequencing data required for metagenome sequencing has led to unacceptably high false discovery rates (FDR). Here we present the application of a novel, gene-independent and signature-based metagenomic taxonomic profiling tool with significantly smaller FDR, which is also capable of classifying never-before seen genomes into the appropriate parent taxa.The algorithm is based upon three primary computational phases: (I) genomic decomposition into bit vectors, (II) bit vector intersections to identify shared regions, and (III) bit vector subtractions to remove shared regions and reveal unique, signature regions. In the Decomposition phase, genomic data is first masked to highlight only the valid (non-ambiguous) regions and then decomposed into overlapping 24-mers. The k-mers are sorted along with their start positions, de-replicated, and then prefixed, to minimize data duplication. The prefixes are indexed and an identical data structure is created for the start positions to mimic that of the k-mer data structure. During the Intersection phase -- which is the most computationally intensive phase -- as an all-vs-all comparison is made, the number of comparisons is first reduced by four methods: (a) Prefix restriction, (b) Overlap detection, (c) Overlap restriction, and (d) Result recording. In Prefix restriction, only k-mers of the same prefix are compared. Within that group, potential overlap of k-mer suffixes that would result in a non-empty set intersection are screened for. If such an overlap exists, the region which intersects is first reduced by performing a binary search of the boundary suffixes of the smaller set into the larger set, which defines the limits of the zipper-based intersection process. Rather than recording the actual k-mers of the intersection, another data structure of identical "shape" is created which consists of only bit vectors so that only a 1 or 0 will be stored in the location of the k-mer suffix that was found in the intersection. This reduces the amount of data generated and stored considerably. During the Subtraction phase, relevant intersection bitmasks are first unionized together to form a single bitmask which is then applied over the original genome to reveal only those regions of the genome that are unique. These regions are then exported to disk in FASTA format and used in the application of determining the constituents of an unknown metagenomic community.

Freitas, Tracey↗