Search NASA⌕ Search

Engineering topics

Li, Qiuyan

Publications and source records attributed to Li, Qiuyan.

At least 19 records

Understanding and Enhancing Silicon Nanoparticle Distribution during Electrode Processing

Silicon-dominant anodes are of great interest because of their potential to boost the cell-level energy of state-of-the-art Li-ion batteries. While silicon materials have been extensively studied, understanding interactions at the electrode level has recieved little attention, especially the coating process of Si particles, which plays an equally important role in unlocking the full potential of silicon anodes. Herein, the electrode processing of a Si-dominated anode (52.8 wt%, 3.5–4.5 mAh cm −2 ) is being investigated to understand the relationship of processing on the morphology and properties of Si anodes at the electrode level. It has been found that almost-undetectable Si agglomerates easily form during electrode processing, which grow into largeprotrusions after lithiation and trigger potential internal shorting and self-discharge problems. A facile slurry filtration step is proposed to homogenize the particle distribution within Si-dominant electrodes which improves the electrochemical performance and storage stability of Si-based Li ion batteries.

Wu, Bingbin↗

Systems and methods for monitoring organisms within an aquatic environment

Systems and methods for monitoring organisms within an aquatic environment are described. According to one aspect, an injectable acoustic transmission device includes a body configured to be injected inside of an organism, a transducer within the body and configured to convert a plurality of electrical signals into a plurality of data transmissions which are transmitted externally of the body and the organism, a plurality of circuit components within the body and configured to use electrical energy from a power source to generate the electrical signals which are provided to the transducer, and wherein the transducer defines an internal volume and at least one of the circuit components is provided within the internal volume of the transducer.

Deng, Z. Daniel↗

Simultaneous Single Crystal Growth and Segregation of Ni-Rich Cathode Enabled by Nanoscale Phase Separation for Advanced Lithium-Ion Batteries

Here, a novel nanoscale phase separation process has been discovered to promote the growth and segregation of single-crystal LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). This process occurs directly during high-temperature calcination without significant agglomeration. The key lies in converting transition metal hydroxide (TM(OH) 2 ) precursors with well-controlled morphology into transition metal oxide (TMO) intermediates before reacting them with lithium salt. The nanoscale redistribution of Ni in TMO, resulting from the concurrent formation of spinel and rock salt phases, helps to deagglomerate the clusters of later-formed NMC811 crystals. The as-prepared single-crystal NMC811 is further validated in a 2Ah pouch cell, demonstrating 1,000 stable cycles. The fundamentally new reaction mechanism of single-crystal growth and segregation provides a new direction for large-scale synthesis of a broad range of single crystals for advanced energy storage.

25 ENERGY STORAGE↗

Electrolytes for lithium batteries with carbon and/or silicon anodes

Electrolytes for lithium ion batteries with carbon-based, silicon-based, or carbon- and silicon-based anodes include a lithium salt; a nonaqueous solvent comprising at least one of the following components: (i) an ester, (ii) a sulfur-containing solvent, (iii) a phosphorus-containing solvent, (iv) an ether, (v) a nitrile, or any combination thereof, wherein the lithium salt is soluble in the solvent; a diluent comprising a fluoroalkyl ether, a fluorinated orthoformate, a fluorinated carbonate, a fluorinated borate, or a combination thereof, wherein the lithium salt has a solubility in the diluent at least 10 times less than a solubility of the lithium salt in the solvent; and an additive having a different composition than the lithium salt, a different composition than the solvent, and a different composition than the diluent.

Xu, Wu↗

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

We report the high volatility of the price of cobalt and the geopolitical limitations of cobalt mining have made the elimination of Co a pressing need for the automotive industry. Owing to their high energy density and low-cost advantages, high-Ni and low-Co or Co-free (zero-Co) layered cathodes have become the most promising cathodes for next-generation lithium-ion batteries. However, current high-Ni cathode materials, without exception, suffer severely from their intrinsic thermal and chemo-mechanical instabilities and insufficient cycle life. Here, in this paper, by using a new compositionally complex (high-entropy) doping strategy, we successfully fabricate a high-Ni, zero-Co layered cathode that has extremely high thermal and cycling stability. Combining X-ray diffraction, transmission electron microscopy and nanotomography, we find that the cathode exhibits nearly zero volumetric change over a wide electrochemical window, resulting in greatly reduced lattice defects and local strain-induced cracks. In-situ heating experiments reveal that the thermal stability of the new cathode is significantly improved, reaching the level of the ultra-stable NMC-532. Owing to the considerably increased thermal stability and the zero volumetric change, it exhibits greatly improved capacity retention. This work, by resolving the long-standing safety and stability concerns for high-Ni, zero-Co cathode materials, offers a commercially viable cathode for safe, long-life lithium-ion batteries and a universal strategy for suppressing strain and phase transformation in intercalation electrodes.

25 ENERGY STORAGE↗

Failure analysis and design principles of silicon-based lithium-ion batteries using micron-sized porous silicon/carbon composite

Significant progresses have been made to overcome the fundamental challenges in silicon (Si)-based lithium-ion batteries (LIBs). However, much less work have been reported on the design and failure analysis these batteries for practical applications. In this work, we analyzed various cell design parameters affecting the performance of pouch cells using micron-sized porous Si with nano-pore structure and coated by pitch-carbon (p-Si/C). The correlation among particle level, electrode level, and cell level properties, especially the effect of electrode density on the volumetric capacity density of Si anode and full batteries have been systematically investigated. It is found that the corrosion of p-Si/C particle surface is the main failure mechanisms on the eventual capacity loss, while Li plating on anode electrode surface is the main reason for the fast capacity loss in later stage of cycling. The volumetric capacity of Si anode highly depends on both electrode density and the Si content. Moreover, the prelithiation of Si anodes is found to increase energy density while decreasing cycle life of Si-based full cells. Finally, the pathways and strategies for adoption of micron-sized p-Si/C anodes in LIBs have been proposed for their practical applications.

25 ENERGY STORAGE↗

Transmitters for animals and methods for transmitting from animals

Animal transmitters are provided that can include: a transducer configured to transmit a signal; process circuitry coupled to the transducer; and an energy harvesting element coupled to the process circuitry. Animals having a transmitter coupled thereto are also provided with the transmitter including an energy harvesting element in operational alignment with the animal's musculoskeletal system. Methods for transmitting the location of an animal are also provided with the methods including: coupling a transmitter powered by an energy harvesting element to the animal; and monitoring the transmissions of the transmitter.

Deng, Z. Daniel↗

To Pave the Way for Large-Scale Electrode Processing of Moisture-Sensitive Ni-Rich Cathodes

High-capacity Ni-rich cathode such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) has a great potential to enable high energy lithium-ion batteries (LIBs) for long-range electrical vehicles. However, the utilization of NMC 811 in large-scale application is still challenging. While many published papers on NMC811 focus on materials modification, the moisture sensitivity of NMC811 and its implications in storage and large-scale electrode coating are not well explored, not to mention how to overcome those challenges for industry application. This work discusses the key parameters impacting the rheological properties of NMC811 slurries and their correlations to the properties of dried electrodes. Effective solutions are proposed to address the gelation issue of NMC811 slurry during large-scale coating to hopefully inspire more effective and practical approaches to tackle the grand challenges in electrochemical energy storage.

25 ENERGY STORAGE↗

Toward the Practical Use of Cobalt-Free Lithium-Ion Batteries by an Advanced Ether-Based Electrolyte

The criticality of cobalt (Co) has been motivating the quest for Co-free positive electrode materials for building lithium (Li)-ion batteries. However, the Co-free positive electrode materials usually suffer from relatively fast capacity decay when coupled with conventional LiPF 6 -organocarbonates electrolytes. To address this issue, a 1,2-dimethoxyethane (DME) based localized high concentration electrolyte (LHCE) was developed and evaluated in a Co-free Li-ion cell chemistry (Graphite||LiNi 0.96 Mg 0.02 Ti 0.02 O 2 ). Extraordinary capacity retentions were achieved with the LHCE in coin cells (95.3%), single layer pouch cells (79.4%) and high capacity loading double layer pouch cells (70.9 %) after being operated within the voltage range of 2.5-4.4 V for 500 charge/discharge cycles. The capacity retentions of counterpart cells using LiPF6 based conventional electrolyte only reached 61.1%, 57.2% and 59.8%, respectively. Mechanistic studies reveal that the superior electrode/electrolyte interphases formed by the LHCE and the intrinsic chemical stability of the LHCE account for the excellent electrochemical performance in the Co-free Li-ion cells.

25 ENERGY STORAGE↗

Optimization of Localized High Concentration Electrolytes (LHCE) for Li||LiCoO 2 and Si|| LiCoO 2 Batteries used in Consumer Electronics Applications (Final Report for I3T Project 75934)

This project will optimize localized high concentration electrolyte (LHCE) for Li/LCO and Si/LCO batteries for consumer electronics applications, including select the best solvent and diluent, optimize the ratios of the solvents and the salt concentration. Results will be demonstrated not only in both coin cells, but also in pouch cells, which is required for large-scale commercial applications. This work can provide better understanding that would also benefit other LMB projects, including Li/NMC and Li/S batteries for electric vehicle applications. In the history of rechargeable batteries, all batteries have been first used in small scale consumer electronics, then eventually penetrate to large scale applications such as electrical vehicle or grid. We believe this development route will also be true for LMBs. By developing the best electrolyte for Li/LCO and Si/LCO chemistry, we will not only get the early market entry in consumer electronics, but we can also accumulate experience on the practical application of LMBs which can be used to further develop other types of LMBs for EV and other large-scale applications pursued by DOE.

25 ENERGY STORAGE↗

Silicon-Based Anodes for Long-Cycle-Life Lithium-ion Batteries

CVD process has been studied and optimized to achieve 2x scale up of porous Si anode materials with a clean process. The roles of CVD temperature, duration, C 2 H 2 gas pressure, and carrier gas have been optimized. It is found that LHCE (LHCE-1 and LHCE-4) can lead to more than 50% increase in the cycling stability of Si||NMC622 cells. LHCE-4 can also lead to smaller impedance increase and longer calendar life when tested in single layer pouch cells. These results are very helpful in the understanding of the Si based anode and further development of Si based Li ion batteries.

25 ENERGY STORAGE↗

A Micrometer‐Sized Silicon/Carbon Composite Anode Synthesized by Impregnation of Petroleum Pitch in Nanoporous Silicon

Porous silicon (Si)/carbon nanocomposites have been extensively explored as a promising anode material for high-energy lithium (Li)-ion batteries (LIBs). However, shrinking of the pores and sintering of Si in the nanoporous structure during fabrication often diminishes the full benefits of nanoporous Si. Herein, a scalable method is reported to preserve the porous Si nanostructure by impregnating petroleum pitch inside of porous Si before high-temperature treatment. The resulting micrometer-sized Si/C composite maintains a desired porosity to accommodate large volume change and high conductivity to facilitate charge transfer. It also forms a stable surface coating that limits the penetration of electrolyte into nanoporous Si and minimizes the side reaction between electrolyte and Si during cycling and storage. A Si-based anode with 80% of pitch-derived carbon/nanoporous Si enables very stable cycling of a Si||Li(Ni0.5Co0.2Mn0.3)O 2 (NMC532) battery (80% capacity retention after 450 cycles). It also leads to low swelling in both particle and electrode levels required for the next generation of high-energy LIBs. In conclusion, the process also can be used to preserve the porous structure of other nanoporous materials that need to be treated at high temperatures.

anode materials↗

Understanding and applying coulombic efficiency in lithium metal batteries

Coulombic Efficiency (CE) has been widely used in battery research as a quantifiable monitor to compare the properties and performances of materials, electrolytes, interfaces and the entire electrochemical cells. While CE with ultra high precision effectively predicts the lifespan and health for lithium ion (Li-ion) batteries, it is not necessarily true in rechargeable lithium (Li) metal batteries. A large variation of CE is often seen even from the same materials and electrolytes in Li metal cells. This work discusses the fundamental definition of CE in different configurations of Li metal-based cells. The similarities and differences of CE in Li-ion and Li metal cells have been clarified and used to understand the relevance/irrelevance between CE and cycling. Long-standing goal of this study is to help rational design of cell testing protocols and elaborate electrochemical results. The insights from this work are broadly applicable in many other rechargeable metal cells e.g., Zn, Mg and Na batteries to accelerate reseach innovation.

Xiao, Jie↗

High-Power Lithium Metal Batteries Enabled by High-Concentration Acetonitrile-Based Electrolytes with Vinylene Carbonate Additive

To enable next-generation high power, high-energy-density lithium (Li) metal batteries (LMBs), an electrolyte possessing both high Li Coulombic efficiency (CE) at high-rate and good anodic stability on cathodes is critical. Acetonitrile (AN) is a well-known organic solvent for high anodic stability and high ionic conductivity, yet its application in LMBs is limited due to its poor compatibility with Li metal anode even at high salt concentration conditions. Here, we developed a highly concentrated AN-based electrolyte with vinylene carbonate (VC) additive to suppress Li+ depletion at high current densities. Addition of VC in the AN-based electrolyte leads to the formation of a polycarbonate-based solid electrolyte interphase which minimizes Li corrosion and leads to very high Li CE of up to 99.1% at a current density of 0.2 mA cm-2. Using such an electrolyte, fast charging of Li||NMC333 cells has been realized at a high current density of 3.6 mA cm-2, and stable cycling of Li||NMC622 cells with a high cathode loading of 4 mAh cm-2 has also been demonstrated.

Peng, Zhe↗

Enhanced Stability of Li Metal Anodes by Synergetic Control of Nucleation and the Solid Electrolyte Interphase

Use of a protective coating on a lithium (Li) metal anode (LMA) is an effective approach to enhance its coulombic efficiency and cycling stability. Here we report a facile approach to produce uniform silver (Ag) nanoparticle-decorated LMAs for high-performance Li metal batteries (LMBs). This effective treatment can lead to well controlled nucleation and the formation of a stable solid electrolyte interphase (SEI). Ag nanoparticles embedded in the surface of Li anodes induced uniform Li plating/stripping morphologies with reduced overpotential. More importantly, cross-linked lithium fluoride (LiF) networks formed during Ag+ reduction enabled a highly stable SEI layer. Based on the Ag-LiF decorated anodes, LMBs with LiNi1/3Mn1/3Co1/3O2 cathode (~1.8 mAh cm-2) can retain >80% capacity over 500 cycles. The similar results were also obtained when the same approach was applied to the design of stable sodium (Na) anodes. These results indicate that synergetic control of the nucleation and SEI is an efficient approach to stabilize rechargeable metal batteries.

anode↗

Polymer-in-"quasi-ionic liquid" electrolytes for high-voltage lithium metal batteries

Due to the limited oxidation stability (< 4 V) of ether oxygen, PEO-based polymer electrolytes are not compatible with high-voltage (> 4 V) cathodes, restricting the energy density of lithium (Li) metal batteries. Here, we design a new type of polymer in quasi-ionic liquid electrolyte (PQILE) that reduces the lone electron pairs of ether oxygens from PEO and ether solvent, induces the formation of stable interfacial layers on both surfaces of LiNi1/3Mn1/3Co1/3O2 cathode and Li metal anode, resulting in a capacity retention of 88.4%, 86.7% and 79.2% after 300 cycles with the charge cutoff voltage of 4.2, 4.3 and 4.4 V, respectively. It’s promising to use quasi-ionic liquids to design new polymer electrolytes for high-voltage and high-specific-energy Li metal batteries.

Wu, Haiping↗

High-performance silicon anodes enabled by nonflammable localized high-concentration electrolytes

Silicon (Si) anode is regarded as one of the most promising alternatives to graphite for high energy density lithium ion batteries (LIBs), but their practical applications have been hindered by high volume change, limited cycle life and safety concerns. In this work we developed nonflammable localized high concentration electrolytes (LHCEs) for Si-based anodes. The LHCEs enabled the Si anodes with significantly enhanced electrochemical performances comparing to the conventional carbonate electrolytes with high content of fluoroethylene carbonate (FEC). The LHCE with only 1.2 wt% FEC can further improve the long-term cycling stability of Si-based anodes. When coupled with a LiNi0.3Mn0.3Co0.3O2 cathode, the full cells using this nonflammable LHCE could maintain >90% capacity after 600 cycles at C/2 rate, demonstrate excellent rate capability and cycling stability at elevated temperatures and high loadings. This work casts new insights in electrolyte development from the perspective of in-situ Si/electrolyte interphase protection for high energy density LIBs with Si anodes.

Silicon anode, electrolyte, nonflammable, localize↗

High-energy lithium metal pouch cells with limited anode swelling and long stable cycles

Li metal anode has attracted wide attentions for high-energy cells, but there have been few reports of long term cycling and the degradation mechanism of realistic high-energy Li metal batteries (LMBs). A key issue inherent to high-energy LMBs is cell swelling due to continuous side reactions between Li and electrolyte. Herein, a prototypical 300 Wh kg-1 (1.0 Ah) pouch cell is developed by combining Li metal anode and LiNi0.6Mn0.2Co0.2O2 cathode. In a conventional carbonate electrolyte, the cell can only last 12 cycles because of the depletion of Li and electrolyte accompanied by a serious cell swelling of more than 110% thickening. Through the integration of a new compatible electrolyte and a uniform external pressure, over 200 stable cycles with 86% capacity retention and 83% energy retention have been demonstrated. Using this 300 Wh kg-1 pouch cell as a platform, two continuous but different Li anode structural evolution processes are revealed: (1) in the initial 50 cycles, flat Li foil converts into large Li particles entangled within the solid electrolyte interphase (SEI) layer, leading to a fast anode volume expansion and cell thickening. (2) As cycling continued, the external pressure maintains good contact between Li particles to ensure a percolation pathway for both ions and electrons thus the electrochemical reactions continue to occur through the entire anode. The individual solid Li particles evolve into a porous structure buffering the further anode volume expansion. Accordingly, Li anode thickening is significantly reduced with only 19% cell swelling in subsequent 150 cycles.

Niu, Chaojiang↗