Search NASA⌕ Search

Engineering topics

Li, W. H.

Publications and source records attributed to Li, W. H..

Multi-scale time-resolved electron diffraction: A case study in moiré materials

Ultrafast-optical-pump — structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. Here we deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe 2 /MoSe 2 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector’s high frame rate, we show that a chopping technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe 2 /MoSe 2 and resolves distinct diffusion mechanisms in space and time.

36 MATERIALS SCIENCE↗

Coupled nonlinear elasticity, plastic slip, twinning, and phase transformation in single crystal titanium for plate impact loading

High purity single crystal titanium (Ti) under shockwave loading in plate impact experiment is modelled and simulated, with help of the finite element. A thermodynamically consistent system of equations is formulated in the frame of large deformation to consider material anisotropy, rate dependence, and multi-physics including nonlinear elasticity, dislocation based plastic slip, deformation twinning, and phase transformation. A novel kinematics is proposed to consider phase transformation in the α twin variants and also to consider the dislocation based slip in all of components of parent material, primary twins and the ω phase. The thermodynamically consistent driving forces for plastic slip, twinning, and phase transformation are developed based upon the second law of thermodynamics. For nonlinear elasticity, the stiffness matrix is dependent on the volume fractions of all components, and the volumetric part of Cauchy stress is obtained from the nonlinear equation of state. Dislocation based plastic slip in multi-variant and multiphase heterogeneous materials is developed and interactions of dislocations among all slip modes are taken into account. A mechanism for dislocation density evolution during twinning and phase transformation is proposed. The shock loading along the [0001] and [10$\bar{1}1$ directions of single crystal high purity Ti is investigated computationally. Very good correspondence between simulation and experiment is obtained, which includes pole figures, volume fractions of components, free surface velocity, peak pressure, and phase transformation pressure. Multiple experimental phenomena are interpreted based upon the progression of dislocation slip, deformation twinning, and phase transformation. In compression with the [10$\bar{1}1$ crystal, a higher volume fraction in the primary twins but a lower secondary twin volume fraction in the [0001] crystal in experiment was observed. Finally, the higher propensity for phase transformation occurs in the [0001] crystal is reproduced. In addition to material texture, distributions of temperature, stresses, and plastic strains dependent on the impact loading directions are revealed.

36 MATERIALS SCIENCE↗

Revealing the pseudogap in Sr 3 (Ru 0.985 Fe 0.015 ) 2 O 7 by optical spectroscopy

We report resistivity, magnetization, and optical spectroscopy study on single-crystal sample of Sr 3 (Ru 0.985 Fe 0.015 ) 2 O 7 . An upturn is observed in resistivity at about 30 K. Below 30 K, the dip in resistivity R(ω), the suppression in scattering rate 1/τ(ω), the peaklike feature in optical conductivity σ 1 (ω), and the remainder of spectral weight all suggest the formation of a pseudogap. In addition, one phonon peak at about 600cm –1 is distinguished at all temperatures, which has asymmetric line shape. Such asymmetric line shape can be fit by a Fano function, and the resulting Fano factor 1/q 2 and linewidth γ show significant increases below 30 K, giving further evidence for the formation of a pseudogap, which might originate from the partial k-space gap opening due to density wave instability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Establishment and experimental verification of the photoresist model considering interface slip between photoresist and concave spherical substrate

A thickness distribution model of photoresist spin-coating on concave spherical substrate (CSS) has been developed via both theoretical studies and experimental verification. The stress of photoresist on rotating CSS is analyzed and the boundary conditions of hydrodynamic equation are presented under the non-lubricating condition. Moreover, a multivariable polynomial equation of photoresist-layer thickness distribution is derived by analyzing and deducing the flow equation where the evaporation rate, substrate topography, interface slip between liquid and CSS, and the variation of rotational speed and photoresist parameters are considered in detail. Importantly, the photoresist-layer thickness at various CSS rotational speeds and liquid concentrations can be obtained according to the theoretical equation. The required photoresist viscosity and concentration parameters of different photoresist coating thickness under a certain coating speeds can be also solved through this equation. It is noted that the calculated theoretical values are well consistent with the experimental results which were measured with various CSS rotational speeds and liquid concentrations at steady state. Therefore, both our experimental results and theoretical analysis provide the guidance for photoresist dilution and pave the way for potential improvements and microfabrication applications in the future.

36 MATERIALS SCIENCE↗

Research of a boundary condition quantifiable correction method in the assembly homogenization

The methods and codes currently used in assembly homogenization calculation mostly adopt the reflection boundary conditions. The influences of real boundary conditions on the assembly homogenized parameters were analyzed. They were summarized into four quantifiable effects, and then the mathematical expressions could be got by linearization hypothesis. Through the calculation of a test model, it had been found that the result was close to transport calculation result when considering four boundary quantifiable effects. This method would greatly improve the precision of a core design code which using the assembly homogenization methods, but without much increase of the computing time. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗