Search NASA⌕ Search

Engineering topics

Li, Wenbo

Publications and source records attributed to Li, Wenbo.

Designing electrolytes with high solubility of sulfides/disulfides for high-energy-density and low-cost K-Na/S batteries

Alkaline metal sulfur (AMS) batteries offer a promising solution for grid-level energy storage due to their low cost and long cycle life. However, the formation of solid compounds such as M 2 S 2 and M 2 S (M = Na, K) during cycling limits their performance. Here we unveil intermediate-temperature K-Na/S batteries utilizing advanced electrolytes that dissolve all polysulfides and sulfides (K 2 S x , x = 1–8), significantly enhancing reaction kinetics, specific capacity, and energy density. These batteries achieve near-theoretical capacity (1655 mAh g -1 sulfur) at 75 °C with a 1 M sulfur concentration. At a 4 M sulfur concentration, they deliver 830 mAh g -1 at 2 mA cm -2 , retaining 71% capacity after 1000 cycles. This new K-Na/S battery with specific energy of 150-250 Wh kg -1 only employs earth-abundant elements, making it attractive for long-duration energy storage.

36 MATERIALS SCIENCE↗

Trap characterization of high-growth-rate laser-assisted MOCVD GaN

A detailed study comparing defect incorporation between laser-assisted metal-organic chemical vapor deposition (MOCVD)-grown GaN and conventional low- and high-growth-rate MOCVD GaN was conducted. Using deep-level transient and optical spectroscopy, traps throughout the bandgap were characterized where traps were found at EC-0.25 eV, EC-0.57 eV, EC-0.72 eV, EC-0.9 eV, EC-1.35 eV, EC-2.6 eV, and EC-3.28 eV in all three samples. This indicates no new traps were observed in the laser-assisted MOCVD GaN sample. Overall, the trap concentrations in the laser-assisted MOCVD sample were ∼2× higher than the optimal low-growth-rate sample, but this is primarily due to the increase in gallium vacancy EC-2.6 eV and carbon-related EC-3.28 eV trap concentrations. The EC-0.9 eV trap concentration was ∼2× higher in the laser-assisted sample, so proton irradiation experiments were conducted to identify the physical source of this level. The results indicated this was a native point defect likely related to gallium interstitials. Overall, this study shows that the laser-assisted MOCVD growth method is promising for future thick, high-quality GaN epilayers after further growth optimizations.

Physics↗

Probing unintentional Fe impurity incorporation in MOCVD homoepitaxy GaN: Toward GaN vertical power devices

Unintentional impurity incorporation in GaN drift layers represents a challenging issue that can limit their potential performance in vertical power devices. In this paper, we focus on studying the origins of Fe impurity incorporation in metal-organic chemical vapor deposition (MOCVD) grown GaN materials. Acting as a compensator in n-type GaN drift layers, Fe impurities can reduce the electron mobility in GaN and limit the lowest controllable doping level. Two sources, the sample cleaning process and growth susceptor, were identified as the main mechanisms of Fe incorporation in the MOCVD GaN growth process. It was found that solvent cleaning of the wafer can introduce significant Fe contamination at the growth interface, which would slowly be incorporated into the GaN epilayer, thus causing background Fe impurity as high as 10 17 cm -3 level. Moreover, the Fe impurity in the coating material on the susceptor can introduce additional Fe impurity during the growth process. Our studies revealed that the Fe impurity level could be significantly suppressed by more than two orders when an alternative cleaning process was used and the susceptor surface was fully covered by substrates. Characterization of the Fe impurity concentrations was performed via secondary ion mass spectrometry. The trap level (E C - 0.57) eV from deep-level transient spectroscopy that had previously been attributed to Fe confirmed the carrier compensation effect from Fe. Room temperature Hall mobility as high as 1007 cm 2 /V s was achieved on the MOCVD grown low-Fe GaN. Results from this work will provide guidance for achieving high purity GaN toward high performance GaN vertical power devices.

42 ENGINEERING↗

Uncovering the underlying physical mechanism for cancer-immunity of MHC class I diversity

The cancer cells are heterogeneous populated, which can be classified as MHC class I positive and MHC I class negative. They influence the immune system differently. In this work, we build a core cancer-immune circuit of MHC class I diversity including MHC class I positive cancer type, MHC I class I negative cancer type and 4 immune cell types to uncover the underlying mechanism of the cancer immunity based on the underlying landscape topography. We quantify four steady state attractors, normal state, two low cancer states and a high cancer state. The landscape topography changes upon changes in cancer self-activation and the related killing rate of the killer cells are illustrated. It demonstrates that the competition between the two cancer cell types. We simulate the tumorigenesis and development of cancer according to its biological process and classify these into 7 stages. This landscape framework provides a quantitative way to understand characteristics of these two cancer cell types under immune microenvironment and the underlying physical mechanisms of cancer cell evolution along cancer development.

60 APPLIED LIFE SCIENCES↗

Capacity Optimization of a Centralized Charging Station in Joint Operation with a Wind Farm

In the context of large-scale wind power integration and rapid development of electric vehicles (EVs), a joint operation pattern was proposed to use a centralized charging station (CCS) to address high uncertainties incurred by wind power integration. Additionally, this would directly remove the significant indeterminacy of wind power. Because the CCS is adjacent to a wind power gathering station, it could work jointly with wind farms to operate in power system as an independent enterprise. By combining the actual operational characteristics of the wind farm and the CCS, a multidimensional operating index evaluation system was created for the joint system. Based on the wind farm’s known capacity, a multi-target capacity planning model was established for CCS to maximize the probability of realizing diverse indices of the system based on dependent-chance goal programming. In this model, planning and dispatching are combined to improve the feasibility of results in the operational stage. This approach takes the effects of randomness into account for wind power and battery swapping. The model was solved through combining Monte Carlo simulation and a genetic algorithm (GA) based on segmented encoding. Finally, as shown in the simulation results, the proposed model could comprehensively include factors such as initial investment, wind power price, battery life, etc., to optimize CCS capacity and to ultimately improve the operating indices of the joint system.

17 WIND ENERGY↗

The Structure of the Necrosome RIPK1-RIPK3 Core, a Human Hetero-Amyloid Signaling Complex

The RIPK1-RIPK3 necrosome is an amyloid signaling complex that initiates TNF-induced necroptosis, serving in human immune defense, cancer, and neurodegenerative diseases. RIPK1 and RIPK3 associate through their RIP homotypic interaction motifs with consensus sequences IQIG (RIPK1) and VQVG (RIPK3). Using solid-state nuclear magnetic resonance, we determined the high-resolution structure of the RIPK1-RIPK3 core. RIPK1 and RIPK3 alternately stack (RIPK1, RIPK3, RIPK1, RIPK3, etc.) to form heterotypic β sheets. Two such β sheets bind together along a compact hydrophobic interface featuring an unusual ladder of alternating Ser (from RIPK1) and Cys (from RIPK3). The crystal structure of a four-residue RIPK3 consensus sequence is consistent with the architecture determined by NMR. In conclusion, the RIPK1-RIPK3 core is the first detailed structure of a hetero-amyloid and provides a potential explanation for the specificity of hetero- over homo-amyloid formation and a structural basis for understanding the mechanisms of signal transduction.

59 BASIC BIOLOGICAL SCIENCES↗

First 14-Layer Twinned Hexagonal Perovskite Ba 14 Mn 1.75 Ta 10.5 O 42 : Atomic-Scale Imaging of Cation Ordering

Formation of hexagonal perovskite with mixed cubic and hexagonal stacking of AO 3 layers becomes more and more difficult when the number of layers in the stacking repeating unit increases. So far, the highest number of layers reported for twinned hexagonal perovskite is 12, with alternative 5 consecutive cubic layers and one hexagonal layer in the (ccccch) 2 sequence. Here, we present the unexpected formation of a 14-layer twinned hexagonal perovskite with a stacking sequence (cccccch) 2 for the BaO 3 layers on the Ba 14 Mn 1.75 Ta 10.5 O 42 (Ba 8 MnTa 6 O 24 ) composition, the first example of twinned hexagonal perovskite with a periodicity exceeding 12-layers. The B-cation and vacancy distributions are characterized by multiple efficient and complementary techniques including neutron and synchrotron powder diffraction, scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging, and electron energy loss spectroscopy (EELS) and X-ray energy dispersive spectroscopy (EDS) elemental mapping. Atomic-resolution STEM-HAADF imaging and EELS/EDS elemental mapping enables direct observation of high-spin d 5 Mn 2+ cation ordering in the d 0 Ta 5+ host, thus demonstrating the great potential of this technique for probing cation ordering and performing structure determination. Moreover, atomic mapping allows for the observation of local defect structure variants, which can be a powerful tool for future new material design. The large high-spin Mn 2+ cation and Ta-vacancy pair formation in face-sharing octahedral sites play key roles on both the stabilization of this 14-layer twinned hexagonal perovskite structure and the Mn 2+ ordering in the central corner-sharing octahedral (CSO) positions within the five-consecutive CSO layers. Here, compared with the 8-layer twinned Ba 8 ZnTa 6 O 24 material, the low quality factor in microwave frequency and enhanced ultraviolet and visible light absorption of Ba 14 Mn 1.75 Ta 10.5 O 42 as well as the photocatalytic activity on water splitting are discussed in terms of the presence of high-spin Mn 2+ cations in the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced structural changes in NH{sub 4}Br

We report angle dispersive X-ray diffraction (XRD) measurements and Raman spectroscopy on NH{sub 4}Br up to 70.0 GPa at room temperature. Three thermodynamically stable phases (phases II, IV, and V) are confirmed and a new possible phase (phase VI) of P2{sub 1}/m symmetry is proposed whose structure was established from Rietveld refinement of synchrotron XRD data for the first time. The phase sequence observed in NH{sub 4}Br is in accordance with phase II → IV → V → VI. Phase V transforms into phase VI at about 57.8 GPa with a huge volume reduction of 30%. Still, the intramolecular distances are analyzed to better understand the nature of structures. The H–H interactions become markedly more important as the N–Br distances are compacted, which is probably the reason of the kink of symmetric stretching band (ν{sub 1}) at the transition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electronic properties of the transition layer at the SiO{sub 2}/4H-SiC interface

Using first-principles methods, we generate an amorphous SiO{sub 2}/4H-SiC interface with a transition layer. Based this interface model, we investigate the structural and electronic properties of the interfacial transition layer. The calculated Si 2p core-level shifts for this interface are comparable to the experimental data, indicating that various SiC{sub x}O{sub y} species should be present in this interface transition layer. The analysis of the electronic structures reveals that the tetrahedral SiC{sub x}O{sub y} structures cannot introduce any of the defect states at the interface. Interestingly, our transition layer also includes a C-C=C trimer and SiO{sub 5} configurations, which lead to the generation of interface states. The accurate positions of Kohn-Sham energy levels associated with these defects are further calculated within the hybrid functional scheme. The Kohn-Sham energy levels of the carbon trimer and SiO{sub 5} configurations are located near the conduction and valence band of bulk 4H-SiC, respectively. The result indicates that the carbon trimer occurred in the transition layer may be a possible origin of near interface traps. These findings provide novel insight into the structural and electronic properties of the realistic SiO{sub 2}/SiC interface.

36 MATERIALS SCIENCE↗

Effect of pressure on heterocyclic compounds: Pyrimidine and s-triazine

We have examined the high-pressure behaviors of six-membered heterocyclic compounds of pyrimidine and s-triazine up to 26 and 26.5 GPa, respectively. Pyrimidine crystallizes in Pna2{sub 1} symmetry (phase I) with the freezing pressure of 0.3 GPa, and transforms to another phase (phase II) at 1.1 GPa. Raman spectra of several compression-decompression cycles demonstrate there is a critical pressure of 15.5 GPa for pyrimidine. Pyrimidine returns back to its original liquid state as long as the highest pressure is below 15.1 GPa. Rupture of the aromatic ring is observed once pressure exceeds 15.5 GPa during a compression-decompression cycle, evidenced by the amorphous characteristics of the recovered sample. As for s-triazine, the phase transition from R-3c to C2/c is well reproduced at 0.6 GPa, in comparison with previous Raman data. Detailed Raman scattering experiments corroborate the critical pressure for s-triazine may locate at 14.5 GPa. That is, the compression is reversible below 14.3 GPa, whereas chemical reaction with ring opening is detected when the final pressure is above 14.5 GPa. During compression, the complete amorphization pressure for pyrimidine and s-triazine is identified as 22.4 and 15.2 GPa, respectively, based on disappearance of Raman lattice modes. Synchrotron X-ray diffraction patterns and Fourier transform infrared spectra of recovered samples indicate the products in two cases comprise of extended nitrogen-rich amorphous hydrogenated carbon (a-C:H:N)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental verification of the high pressure crystal structures in NH{sub 3}BH{sub 3}

A detailed high-pressure study on NH{sub 3}BH{sub 3} has been carried out using in situ synchrotron X-ray diffraction (XRD) and Raman scattering with a diamond anvil cell up to 20 and 33 GPa, respectively. The Rietveld refinement based on the XRD pattern and analysis of Raman data indicate two first-order phase transitions from the ambient pressure I4 mm structure (α-NH{sub 3}BH{sub 3}) to a high pressure Cmc2{sub 1} phase (β-NH{sub 3}BH{sub 3}) at 2.14 GPa, and further into a monoclinic P2{sub 1} (Z = 2) phase (γ-NH{sub 3}BH{sub 3}) at 9.67 GPa. Fitting the measured volumetric compression data to the third order Birch-Murnaghan equation of state reveals a bulk modulus of B{sub 0} = 9.9 ± 0.5 and 17.0 ± 3.0 GPa (with fixed B{sub 0}{sup ′} = 4) for the β-NH{sub 3}BH{sub 3} below and above 5 GPa, respectively. Still, with the splitting of the NBH rock mode in Raman experiment, it is concluded that a second-order isostructural phase transition occurs at 5 GPa. By analyzing the dihydrogen bonding framework, the origin of the isostructural phase transition is attributed to the number of dihydrogen bondings per molecule in the Cmc2{sub 1} phase increasing from 12 to 14 at 5 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of step edges on vicinal 4H-SiC(0001) surfaces

The oxidation processes of stepped SiC(0001) surfaces are studied within the ab initio atomistic thermodynamics approach. Our calculations show that a one-dimensional -Si-O- chain structure as a precursor for oxide growth on stepped SiC surfaces is formed along the step edge, promoting further oxidation of the step edges. Following the modified Deal-Grove oxidation model, we also find that the oxidation rate at steps is higher than that at terraces by three orders of magnitude. These findings give a reasonable explanation for the oxide thickness fluctuation between the step and the terrace observed in the previous experiments.

36 MATERIALS SCIENCE↗

Constraints on kinematic model from recent cosmic observations: SN Ia, BAO and observational Hubble data

In this paper, linear first order expansion of deceleration parameter q(z) = q{sub 0}+q{sub 1}(1−a) (M{sub 1}), constant jerk j = j{sub 0} (M{sub 2}) and third order expansion of luminosity distance (M{sub 3}) are confronted with cosmic observations: SCP 307 SN Ia, BAO and observational Hubble data (OHD). Likelihood is implemented to find the best fit model parameters. All these models give the same prediction of the evolution of the universe which is undergoing accelerated expansion currently and experiences a transition from decelerated expansion to accelerated expansion. But, the transition redshift depends on the concrete parameterized form of the model assumed. M{sub 1} and M{sub 2} give value of transition redshift about z{sub t} ∼ 0.6. M{sub 3} gives a larger one, say z{sub t} ∼ 1. The χ{sup 2}/dof implies almost the same goodness of the models. But, for its badness of evolution of deceleration parameter at high redshift z > 1, M{sub 3} can not be reliable. M{sub 1} and M{sub 2} are compatible with ΛCDM model at the 2σ and 1σ confidence levels respectively. M{sub 3} is not compatible with ΛCDM model at 2σ confidence level. From M{sub 1} and M{sub 2} models, one can conclude that the cosmic data favor a cosmological model having j{sub 0} < −1.

79 ASTRONOMY AND ASTROPHYSICS↗