Search NASA⌕ Search

Engineering topics

Li, Xiaoqiang

Publications and source records attributed to Li, Xiaoqiang.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Establishing the accuracy of position–specific carbon isotope analysis of propane by GC–pyrolysis–GC–IRMS

Rationale: Position-specific (PS) δ 13 C values of propane have proven their ability to provide valuable information on the evolution history of natural gases. Two major approaches to measure PS δ 13 C values of propane are isotopic 13 C nuclear magnetic resonance (NMR) and gas chromatography-pyrolysis-gas chromatography-isotope ratio mass spectrometry (GC-Py-GC-IRMS). Measurement accuracy of the isotopic 13 C NMR has been verified, but the requirements of large sample size and long experimental time limit its applications. GC-Py-GC-IRMS is a more versatile method with a small sample size, but its accuracy has not been demonstrated. Methods: We measured the PS δ 13 C values of propane from nine natural gases using both 13 C NMR and GC-Py-GC-IRMS, then evaluated the accuracy of the GC-Py-GC-IRMS method. Results: The results show that large carbon isotope fractionations occurred for both terminal and central carbons within propane during pyrolysis. The isotope fractionations during the pyrolysis are reproducible at optimum conditions, but vary between the two GC-Py-GC-IRMS systems tested, affected by experimental conditions (e.g., pyrolysis temperature, flow rate, and reactor conditions). Conclusions: It is necessary to evaluate and calibrate each GC-Py-GC-IRMS system using propane gases with accurately determined PS δ 13 C values. Finally, this study also highlights a need for PS isotope standards for propane and other molecules (e.g., butane and acetic acid).

03 NATURAL GAS↗
DOE OSTI2023

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Here, steam methane reforming (SMR) generates about 95% of hydrogen (H 2 ) in the U.S. using natural gas as a main feedstock. However, this technology also generates a large amount of carbon dioxide (CO 2 ), a major greenhouse gas causing global warming. Carbon capture and storage (CCS) technique is required, but the cost and safety of storing CO 2 underground are a concern. Here we propose a new approach using microwave/electromagnetic irradiation to produce clean hydrogen from unrecovered hydrocarbons within petroleum reservoirs. Solid carbon or CO 2 produced during this process will be simultaneously sequestrated underground without involving CCS. In this paper, we perform a series of experiments to investigate the in-situ hydrogen production from shale gas (methane) conversion by passing a methane stream through a packed shale rock sample heated by microwave. We found that methane conversion was significantly enhanced in the presence of Fe and Fe 3 O 4 particles as catalysts, with a conversion of 40.5% and 100% at reaction temperature of 500 °C and 600 °C, respectively. Methane conversion is promoted at a lower reaction temperature by the catalytic effect of minerals in shale. Additionally, the influences of catalysts, shale rock, and methane flow rate are characterized.

08 HYDROGEN↗
DOE OSTI2022

Kinetic and equilibrium reactions on natural and laboratory generation of thermogenic gases from Type II marine shale

The phenomenon that laboratory pyrolysis experiments produce much wetter gases than those in natural reservoirs is a long-recognized and debated problem in the investigation of natural gases in sedimentary basins. In this study, we explore the discrepancy by pyrolyzing a type II kerogen from the Woodford Shale in Oklahoma, compared with the previous results on the produced natural gases from the Arkoma Basin generated from the same source rock (Liu et al., 2019) with the discussion of gas and isotopic compositions at bulk and position-specific (PS) levels. An improved GC-pyrolysis-GC IRMS method is applied for the determination of PS δ 13 C of propane produced in the pyrolysis of the Woodford Shale at Easy %R o from 0.76 to 3.27. Kinetic and thermodynamic considerations of the chemical and isotopic compositions of the natural and laboratory pyrolysis gases suggest that the generation of light hydrocarbons involves uni-directional cracking reactions, exchange reactions with water, and likely reversible reactions among light hydrocarbons and other H-containing volatiles. After the gas generation in the unconventional Woodford Shale reservoirs, the C 1 -C 4 gases might have approached close to chemical equilibrium of C 1 -C 3 and isotope equilibrium of C 2 -C 1 and C 3 -C 1 pairs at their peak temperatures. The capping H for the generation of C 1 -C 4 in the Woodford Shale gases appears to have experienced at least partial exchange with the water, while that in the pyrolysis gases is only originated from organic-bound compounds with large kinetic isotope effects (KIE). Our findings indicate that elevated compound-specific and PS δ 13 C values of propane in the wet-gas cracking stage are significantly influenced by the breakdown of the thermally stable compounds (e.g., remaining kerogen, residues). A first synthesis of PS δ 13 C and δ 2 H isotopic compositions of propane from this study and the literature data suggests relatively similar isotopic structures of propane precursors in kerogens. Finally, this study demonstrates that PS isotope analysis of propane can contribute to identifying various geological (e.g., maturation, wet-gas cracking, H exchange, diffusion) and biodegradation processes.

58 GEOSCIENCES↗
DOE OSTI2022

Gas generation and intramolecular isotope study in laboratory pyrolysis of the Springfield coal from the Illinois Basin

Position-specific (PS) isotopes of propane have been proposed as a potential geochemical tool to decipher various geological processes (e.g., thermal cracking, biodegradation, H exchange) in natural reservoirs. The limited studies have been conducted on the PS isotopes of propane from the pyrolysis gases from marine shales, and natural gases sourced from lacustrine and marine kerogens, but little is known on gases produced from the humic kerogen. Here, this study investigated the PS δ 13 C of propane in the closed-system pyrolysis of the Springfield coal, Illinois Basin, Indiana, at 310 to 470 °C (Easy %Ro: 0.76 to 3.07). The C kinetic isotope effect (KIE) of CH 4 produced in both this study and previous low-temperature pyrolysis of the same coal indicates the cleavage of C—O bonds is the main generation pathway at the early kerogen cracking stage, followed by the breakdown of alkyl groups. At the wet-gas cracking stage, C 3 H 8 production from thermally stable compounds has a significant influence on the bulk and position-specific C KIE in the pyrolysis of marine Woodford kerogen and Springfield coal. According to the PS δ 13 C of propane, the central site is likely more enriched in 13 C and the δ 13 C of the terminal site is relatively heterogeneous within the propyl group attached to different functional groups of the gas-prone kerogen. Our findings based on the pyrolysis experiments and natural gas samples indicate thermal cracking and biodegradation appear to alter the δ 13 C cen values more significantly than the δ 13 C ter values of propane. The larger magnitude of ΔC c-t in the kMC simulations (Peterson et al., 2018) compared with those from the marine shale and coal possibly implies the non-random distributions of 13 C of propane precursors in the kerogens. As a new dimension of intramolecular isotopic information of propane, the PS δ 13 C values can contribute to fingerprinting the gas origins and identifying the various geological processes (e.g., kerogen cracking, wet-gas cracking, microbial activities) in sedimentary basins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Position-specific isotope effects during alkaline hydrolysis of 2,4-dinitroanisole resolved by compound-specific isotope analysis, 13 C NMR, and density-functional theory

Compound-specific isotope analysis (CSIA), position-specific isotope analysis (PSIA), and computational modeling (e.g., quantum mechanical models; reactive-transport models) are increasingly being used to monitor and predict biotic and abiotic transformations of organic contaminants in the field. However, identifying the isotope effect(s) associated with a specific transformation remains challenging in many cases. We describe and interpret the position-specific isotope effects of C and N associated with a SN 2 Ar reaction mechanism by a combination of CSIA and PSIA using quantitative 13 C nuclear magnetic resonance spectrometry, and density-functional theory, using 2,4-dinitroanisole (DNAN) as a model compound. The position-specific 13 C enrichment factor of O–C 1 bond at the methoxy group attachment site (ε C1 ) was found to be approximately -41‰, a diagnostic value for transformation of DNAN to its reaction products 2,4-dinitrophenol and methanol. Theoretical kinetic isotope effects calculated for DNAN isotopologues agreed well with the position-specific isotope effects measured by CSIA and PSIA. This combination of measurements and theoretical predictions demonstrates a useful tool for evaluating degradation efficiencies and/or mechanisms of organic contaminants and may promote new and improved applications of isotope analysis in laboratory and field investigations.

13C NMR↗