Search NASA⌕ Search

Engineering topics

Li, Xiaowen

Publications and source records attributed to Li, Xiaowen.

At least 19 records

Windsonde Atmospheric Profile during CoURAGE 2024-2025 at Baltimore.

This is the atmospheric sounding data using Sparv Windsond S1 lower-atmosphere profiling instruments ( https://sparv.io/products/windsond-s1) . These data are taken weekly (twice weekly and twice daily during the two CoURAGE IOPs in February and July 2025). Lower-atmosphere conditions, generally between the surface and 5km altitude, are recorded. The variables include pressure, height, temperature, dew-point temperature, wind speed, and wind direction.

air_temperature↗

Windsonde Atmospheric Profile during CoURAGE 2024-2025 at Kent Island.

This is the atmospheric sounding data using Sparv Windsond S1 lower-atmosphere profiling instruments ( https://sparv.io/products/windsond-s1) . These data are taken weekly (twice weekly and twice daily during the two CoURAGE IOPs in February and July 2025). Lower-atmosphere conditions, generally between the surface and 5km altitude, are recorded. The variables include pressure, height, temperature, dew-point temperature, wind speed, and wind direction.

air_temperature↗

Coastal-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) Science Plan

Understanding the mechanisms governing the urban atmospheric environment is critical for informing urban populations regarding the impacts of climate change and associated mitigation and adaptation measures. Earth system (climate and weather) models have not yet been adapted to provide accurate predictions of climate and weather variability within cities, nor do they provide well-tested representations of the impacts of urban systems on the atmospheric environment. These limitations are largely due to limited field data available for testing and development of these models. We will deploy the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s first Mobile Facility (AMF1) to the mid-Atlantic region surrounding the city of Baltimore for the Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE). This deployment will create a four-node regional atmospheric observatory network including Baltimore and its three primary surrounding environments – rural, urban, and bay. CoURAGE investigators will study the interactions among the Earth’s surface, the atmospheric boundary layer, aerosols and atmospheric composition, clouds, radiation, and precipitation at each site, and examine how the spatial gradients across the region interact to create the climate conditions in Baltimore. This study will determine the degree to which Baltimore’s atmospheric environment depends on interactive feedbacks in the atmospheric system and the degree to which conditions in Baltimore depend on the surrounding environment. Some topics of interest include how urban land management exacerbates heat waves, the impact of regional mesoscale winds (nocturnal jet, bay breeze) on urban air pollution and cloud cover, and the impact of the urban heat island and aerosol production on heavy precipitation events. Understanding this integrated coast-urban-rural system quantitatively and with good accuracy and precision is critical to informing climate adaptation and mitigation efforts in the city of Baltimore. The understanding gained should be applicable to many similar coastal, mid-latitude urban centers. Another important objective of CoURAGE is to improve the representation of the climate of coastal cities in Earth systems models (ESMs). CoURAGE investigators will use the observations to test current ESMs, identify weaknesses and work towards improved simulations of this complex environment. The ARM core facility will be deployed in the city of Baltimore, complementing the Baltimore Social-Environmental Collaborative (BSEC), a DOE urban integrated field laboratory (UIFL). Ancillary sites will be deployed to rural Maryland northwest of Baltimore, and to the southern end of Kent Island within Chesapeake Bay. The fourth node will be a long-term atmospheric observatory operated in Beltsville, Maryland by Howard University and the Maryland Department of the Environment. Measurements will be conducted for one year, starting in December of 2024. There will be two intensive operational periods (IOPs), one in summer and one in winter, when the ancillary sites will be enhanced with additional balloon launches, tethered balloon system (TBS) operation, and added atmospheric composition measurements.

54 ENVIRONMENTAL SCIENCES↗

PSU-BSEC Doppler Lidar Processed Scans

This data repository includes the processed vertically staring measurements (stare files) and the angled scans (profile files) necessary to calculate horizontal winds retrieved by the Pennsylvania State University (PSU) Doppler Lidar as a part of the Baltimore Social-Environmental Collaborative Urban Integrated Field Laboratory (BSEC UIFL). The PSU Doppler Lidar measures aerosol backscatter intensity (m-1 sr-1), signal-to-noise ratio, and radial velocity (i.e., vertical velocity in the case of stare files, units: m/s) at approximately 1 Hz temporal resolution and 30 m spatial resolution. Within the "stare_data" subdirectory there exist example figures of all retrieved data. For further information, please email Nicholas Prince, nec5299@psu.edu.

Air Quality↗

PSU-BSEC Doppler Lidar Processed Scans

This data repository includes the processed vertically staring measurements (stare files) made by the Pennsylvania State University (PSU) Doppler Lidar as a part of the Baltimore Social-Environmental Collaborative Urban Integrated Field Laboratory (BSEC UIFL). The PSU Doppler Lidar measures aerosol backscatter intensity (m-1 sr-1), signal-to-noise ratio, and radial velocity (i.e., vertical velocity in the case of stare files, units: m/s) at approximately 1 Hz temporal resolution and 30 m spatial resolution. Future updates will include angled scans, sky cam images, example figures, and the original .hpl files. For further information, please email Nicholas Prince, nec5299@psu.edu.

Air Quality↗

Comparison of Surface Fluxes Derived from CYGNSS and Simulated by WRF Model: An MJO Case Study

This study focuses on ocean surface fluxes, mainly the latent heat flux, and their impact on MJO propagation and associated precipitation structures over the Indian Ocean and Maritime Continent. The Coupled-Ocean-Atmosphere-Wave-Sediment Transport (COAWST) model is used to simulate two MJO events during the 2017-2018 season: the December 10 - January 20, 2017 case, which maintained its strong precipitation signal over the Maritime Continent, and the March 1 - 20, 2018 case, which was weaker and did not propagate through the Maritime Continent. Both simulated MJO events show positive biases in surface rainfall compared with GPM IMERG data. During the MJO suppressed phase, the simulations rain more often than the observations. During the active phase, the westward propagating precipitation structures are more organized and much stronger compared with the observations, sometimes forming westward propagating cyclones that weakened the eastward precipitation signals. Two aspects of the surface flux interactions are investigated: the impact of the domain mean surface fluxes, and the impact of storm scale circulations and their interactions with local surface fluxes. Both aspects affect water vapor budget, atmosphere instability and mean flow, through which convection initiation, organization, and propagation are influenced. Model sensitivity tests with different radiation, microphysics, PBL schemes and nudging schemes indicate that in the control simulations, higher SST and surface fluxes, especially during the suppressed period, are the main reason of rainfall overestimation compared with IMERG data. The strong westward propagating signals are caused by both increased atmosphere instability and reduced mean wind shear. Unfortunately, the small differences in mean SST and surface fluxes between different model sensitivity tests are all within the satellite observation error margin, and cannot be directly corroborated by observations. One of the advantages of CYGNSS satellites is that they observe ocean surface wind and heat fluxes underneath strong rainfall events such as the convective systems associated with MJO active phases. Currently we are comparing CYGNSS level 2 surface fluxes retrievals and the model simulations in order to better understand the second aspect of the MJO and surface fluxes interactions, and how this affects MJO strengths and propagations. The interactive atmosphere-ocean-wave model also provides cases that directly comparing satellite observables (the bistatic radar cross section) and the model simulations (through CYGNSS satellite simulator). These discrepancies are more prominent in coupled ocean simulations, mainly due to higher SST and enhanced surface fluxes.

Li, Xiaowen↗

Evaluating Precipitation Features and Rainfall Characteristics in a Multi-scale Modeling Framework

Cloud and precipitation systems over the tropics and subtropics are simulated with a multi-scale modeling framework (MMF) and compared against the TRMM radar precipitation features (RPFs) product. A methodology, in close analogy to the TRMM RPFs, is developed to analyze simulated cloud precipitating structures from the embedded two-dimensional cloud-resolving models (CRMs) within an MMF. Despite the two-dimensionality of the CRMs, the simulated RPFs population distribution, and horizontal and vertical structure are in good agreement with TRMM observations. However, some deficits are also found in the model simulations. The model tends to overestimate mean convective precipitation rates for RPFs with a size less than 100 km, contributing to the excessive precipitation biases in the warm pool and western Pacific, western and northern India Ocean, and eastern Pacific commonly found in most MMFs. For large features with a size greater than 150 km, both convective and stratiform rain rates are underestimated. The distribution of maximum radar echo top heights as a function of RPF size is well simulated except the model tends to underestimate the occurrence frequency of maximum heights greater than 15 km. The maximum echo top heights for convective cells embedded within large RPFs with a size greater than 150 km are also underestimated. The cyclic lateral boundary with a limited model domain generates artificial occurrences for RPFs with a size close to the model domain size, producing a significant contribution to the total rainfall due to their sizes. This cyclic lateral boundary effect can be easily identified and quantified in both probability and cumulative distribution functions of RPFs. The geophysical distribution of the population of the largest RPFs in the control experiment shows they are mainly located in the Subtropics but also partially contribute to the common MMF biases of excessive precipitation in the Tropics. Sensitivity experiments using CRMs with different domain sizes and different grid spacings show larger domains (higher resolution) tend to shift the RPFs distribution to large (small) sizes. The cyclic lateral boundary biases increase as CRM domain size decreases. The impacts of model horizontal and vertical resolution on simulated convective systems are also investigated.

Chern, Jiun-Dar↗

Versatile and Highly Efficient Controls of Reversible Topotactic Metal–Insulator Transitions through Proton Intercalation

The ability to tailor a new crystalline structure and associated functionalities with a variety of stimuli is one of the key issues in material design. Developing synthetic routes to functional materials with partially absorbed nonmetallic elements (i.e., hydrogen and nitrogen) can open up more possibilities for preparing novel families of electronically active oxide compounds. Here, fast and reversible uptake and release of hydrogen in epitaxial ABO 3 manganite films through an adapted low-frequency inductively coupled plasma technology is introduced. Compared with traditional dopants of metallic cations, the plasma-assisted hydrogen implantations not only produce reversibly structural transformations from pristine perovskite (PV) phase to a newly found protonation-driven brownmillerite one but also regulate remarkably different electronic properties driving the material from a ferromagnetic metal to a weakly ferromagnetic insulator for a range of manganite (La 1–x Sr x MnO 3 ) thin films. Moreover, a reversible perovskite-brownmillerite-perovskite transition is achieved at a relatively low temperature (T ≤ 350 °C), enabling multifunctional modulations for integrated electronic systems. The fast, low-temperature control of structural and electronic properties by the facile hydrogenation/dehydrogenation treatment substantially widens the space for exploring new possibilities of novel properties in proton-based multifunctional materials.

36 MATERIALS SCIENCE↗

Active and Passive Radiative Transfer Simulations for GPM-Related Field Campaigns

Radiative transfer modeling is an important tool for interpreting remote sensing observations. It allows us to determine how sensor characteristics will impact observations, and it gives us a framework for us to test assumptions about the phenomena we are attempting to observe. In this work, we use cloud simulations for precipitation events observed during various GPM-related field campaigns. The simulations show how various properties of clouds and precipitation affect the measurements.

Adams, Ian S.↗

Use of polarimetric radar measurements to constrain simulated convective cell evolution: a pilot study with Lagrangian tracking

Abstract. To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase ( K DP ) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of K DP and radar differential reflectivity ( Z DR ) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K DP and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ~  150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

54 ENVIRONMENTAL SCIENCES↗

Use of Polarimetric Radar Measurements to Constrain Simulated Convective Cell Evolution: A Pilot Study with Lagrangian Tracking

To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase (K(sub DP)) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of KDP and radar differential reflectivity (Z(sub DR)) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K(sub DP) and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ∼ 150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

Fridlind, Ann M.↗

Evolution of Precipitation Structure During the November DYNAMO MJO Event: Cloud-Resolving Model Intercomparison and Cross Validation Using Radar Observations

Evolution of precipitation structures are simulated and compared with radar observations for the November Madden-Julian Oscillation (MJO) event during the DYNAmics of the MJO (DYNAMO) field campaign. Three ground-based, ship-borne, and spaceborne precipitation radars and three cloud-resolving models (CRMs) driven by observed large-scale forcing are used to study precipitation structures at different locations over the central equatorial Indian Ocean. Convective strength is represented by 0-dBZ echo-top heights, and convective organization by contiguous 17-dBZ areas. The multi-radar and multi-model framework allows for more stringent model validations. The emphasis is on testing models' ability to simulate subtle differences observed at different radar sites when the MJO event passed through. The results show that CRMs forced by site-specific large-scale forcing can reproduce not only common features in cloud populations but also subtle variations observed by different radars. The comparisons also revealed common deficiencies in CRM simulations where they underestimate radar echo-top heights for the strongest convection within large, organized precipitation features. Cross validations with multiple radars and models also enable quantitative comparisons in CRM sensitivity studies using different large-scale forcing, microphysical schemes and parameters, resolutions, and domain sizes. In terms of radar echo-top height temporal variations, many model sensitivity tests have better correlations than radar/model comparisons, indicating robustness in model performance on this aspect. It is further shown that well-validated model simulations could be used to constrain uncertainties in observed echo-top heights when the low-resolution surveillance scanning strategy is used.

54 ENVIRONMENTAL SCIENCES↗

Evolution of Precipitation Structure During the November DYNAMO MJO Event: Cloud-Resolving Model Inter-comparison and Cross-Validation using Radar Observations

Evolution of precipitation structures are simulated and compared with radar observations for the November Madden-Julian Oscillation (MJO) event during the DYNAmics of the MJO (DYNAMO) field campaign. Three ground-based, ship-borne, and space-borne precipitation radars and three Cloud-Resolving Models (CRMs) driven by observed large-scale forcing are used to study precipitation structures at different locations over the central equatorial Indian Ocean. Convective strength is represented by 0-dBZ echo-top heights, and convective organization by contiguous 17-dBZ areas. The multi-radar and multi-model framework allows for more stringent model validations. The emphasis is on testing models’ ability to simulate subtle differences observed at different radar sites when the MJO event passed through. The results show that CRMs forced by site-specific large-scale forcing can reproduce not only common features in cloud populations, but also subtle variations observed by different radars. The comparisons also revealed common deficiencies in CRM simulations where they underestimate radar echo-top heights for the strongest convection within large, organized precipitation features. Cross-validations with multiple radars and models also enable quantitative comparisons in CRM sensitivity studies using different large-scale forcing, microphysical schemes and parameters, resolutions, and domain sizes. In terms of radar echo-top height temporal variations, many model sensitivity tests have better correlations than radar/model comparisons, indicating robustness in model performance on this aspect. It is further shown that well-validated model simulations could be used to constrain uncertainties in observed echo-top heights when the low-resolution surveillance scanning strategy is used.

54 ENVIRONMENTAL SCIENCES↗

Derivation of aerosol profiles for MC3E convection studies and use in simulations of the 20 May squall line case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between -11 and -23 °C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near ~400 µm in randomly oriented maximum dimension ( D max ). The ice mass at -23 °C is primarily in a closely collocated mode, whereas a mass mode near D max ~1000 µm becomes dominant with decreasing elevation to the -11 °C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak D max by a factor of 3–5 and underpredict ice number concentration by a factor of 4–10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

54 ENVIRONMENTAL SCIENCES↗

Derivation of Aerosol Profiles for MC3E Convection Studies and Use in Simulations of the 20 May Squall Line Case

Advancing understanding of deep convection microphysics via mesoscale modeling studies of well-observed case studies requires observation-based aerosol inputs. Here, we derive hygroscopic aerosol size distribution input profiles from ground-based and airborne measurements for six convection case studies observed during the Midlatitude Continental Convective Cloud Experiment (MC3E) over Oklahoma. We demonstrate use of an input profile in simulations of the only well-observed case study that produced extensive stratiform outflow on 20 May 2011. At well-sampled elevations between −11 and −23 C over widespread stratiform rain, ice crystal number concentrations are consistently dominated by a single mode near approx. 400 microm in randomly oriented maximum dimension (Dmax). The ice mass at −23 C is primarily in a closely collocated mode, whereas a mass mode near Dmax approx. 1000 microns becomes dominant with decreasing elevation to the −11 C level, consistent with possible aggregation during sedimentation. However, simulations with and without observation-based aerosol inputs systematically overpredict mass peak Dmax by a factor of 3-5 and underpredict ice number concentration by a factor of 4-10. Previously reported simulations with both two-moment and size-resolved microphysics have shown biases of a similar nature. The observed ice properties are notably similar to those reported from recent tropical measurements. Based on several lines of evidence, we speculate that updraft microphysical pathways determining outflow properties in the 20 May case are similar to a tropical regime, likely associated with warm-temperature ice multiplication that is not well understood or well represented in models.

Fridlind, Ann M.↗

Benefits of a 4th Ice Class in the Simulated Radar Reflectivities of Convective Systems Using a Bulk Microphysics Scheme

Numerous cloud microphysical schemes designed for cloud and mesoscale models are currently in use, ranging from simple bulk to multi-moment, multi-class to explicit bin schemes. This study details the benefits of adding a 4th ice class (hail) to an already improved 3-class ice bulk microphysics scheme developed for the Goddard Cumulus Ensemble model based on Rutledge and Hobbs (1983,1984). Besides the addition and modification of several hail processes from Lin et al. (1983), further modifications were made to the 3-ice processes, including allowing greater ice super saturation and mitigating spurious evaporationsublimation in the saturation adjustment scheme, allowing graupelhail to become snow via vapor growth and hail to become graupel via riming, and the inclusion of a rain evaporation correction and vapor diffusivity factor. The improved 3-ice snowgraupel size-mapping schemes were adjusted to be more stable at higher mixing rations and to increase the aggregation effect for snow. A snow density mapping was also added. The new scheme was applied to an intense continental squall line and a weaker, loosely-organized continental case using three different hail intercepts. Peak simulated reflectivities agree well with radar for both the intense and weaker case and were better than earlier 3-ice versions when using a moderate and large intercept for hail, respectively. Simulated reflectivity distributions versus height were also improved versus radar in both cases compared to earlier 3-ice versions. The bin-based rain evaporation correction affected the squall line case more but did not change the overall agreement in reflectivity distributions.

bulk microphysics schemes↗

Precipitation and Air Pollution at Mountain and Plain Stations in Northern China: Insights Gained from Observations and Modeling

We analyzed 40 year data sets of daily average visibility (a proxy for surface aerosol concentration) and hourly precipitation at seven weather stations, including three stations located on the Taihang Mountains, during the summertime in northern China. There was no significant trend in summertime total precipitation at almost all stations. However, light rain decreased, whereas heavy rain increased as visibility decreased over the period studied. The decrease in light rain was seen in both orographic-forced shallow clouds and mesoscale stratiform clouds. The consistent trends in observed changes in visibility, precipitation, and orographic factor appear to be a testimony to the effects of aerosols. The potential impact of large-scale environmental factors, such as precipitable water, convective available potential energy, and vertical wind shear, on precipitation was investigated. No direct links were found. To validate our observational hypothesis about aerosol effects, Weather Research and Forecasting model simulations with spectral-bin microphysics at the cloud-resolving scale were conducted. Model results confirmed the role of aerosol indirect effects in reducing the light rain amount and frequency in the mountainous area for both orographic-forced shallow clouds and mesoscale stratiform clouds and in eliciting a different response in the neighboring plains. The opposite response of light rain to the increase in pollution when there is no terrain included in the model suggests that orography is likely a significant factor contributing to the opposite trends in light rain seen in mountainous and plain areas.

air pollution↗

The Goddard Cumulus Ensemble Model (GCE): Improvements and Applications for Studying Precipitation Processes

Convection is the primary transport process in the Earth's atmosphere. About two-thirds of the Earth's rainfall and severe floods derive from convection. In addition, two-thirds of the global rain falls in the tropics, while the associated latent heat release accounts for three-fourths of the total heat energy for the Earth's atmosphere. Cloud-resolving models (CRMs) have been used to improve our understanding of cloud and precipitation processes and phenomena from micro-scale to cloud-scale and mesoscale as well as their interactions with radiation and surface processes. CRMs use sophisticated and realistic representations of cloud microphysical processes and can reasonably well resolve the time evolution, structure, and life cycles of clouds and cloud systems. CRMs also allow for explicit interaction between clouds, outgoing longwave (cooling) and incoming solar (heating) radiation, and ocean and land surface processes. Observations are required to initialize CRMs and to validate their results. The Goddard Cumulus Ensemble model (GCE) has been developed and improved at NASA/Goddard Space Flight Center over the past three decades. It is amulti-dimensional non-hydrostatic CRM that can simulate clouds and cloud systems in different environments. Early improvements and testing were presented in Tao and Simpson (1993) and Tao et al. (2003a). A review on the application of the GCE to the understanding of precipitation processes can be found in Simpson and Tao (1993) and Tao (2003). In this paper, recent model improvements (microphysics, radiation and land surface processes) are described along with their impact and performance on cloud and precipitation events in different geographic locations via comparisons with observations. In addition, recent advanced applications of the GCE are presented that include understanding the physical processes responsible for diurnal variation, examining the impact of aerosols (cloud condensation nuclei or CCN and ice nuclei or IN) on precipitation processes, utilizing a satellite simulator to improve the microphysics, providing better simulations for satellite-derived latent heating retrieval, and coupling with a general circulation model to improve the representation of precipitation processes.

GCE↗