Cytotoxicity and genotoxicity of cadmium oxide nanoparticles evaluated using in vitro assays
Not Available
Engineering topics
Publications and source records attributed to Li, Yan.
Not Available
Goethite is a major iron-bearing sedimentary mineral on Earth. In this study, we conducted in situ high-pressure x-ray diffraction, Raman, and electrical impedance spectroscopy measurements of goethite using a diamond anvil cell (DAC) at room temperature and high pressures up to 32 GPa. We observed feature changes in both the Raman spectra and electrical resistance at about 5 and 11 GPa. However, the x-ray diffraction patterns show no structural phase transition in the entire pressure range of the study. The derived pressure-volume (P-V) data show a smooth compression curve with no clear evidence of any second-order phase transition. Fitting the volumetric data to the second-order Birch–Murnaghan equation of state yields V 0 = 138.9 ± 0.5 Å 3 and K 0 = 126 ± 5 GPa.
Abstract Introduction Large longitudinal biomarkers database focusing on middle age is needed for Alzheimer's disease (AD) prevention. Methods Data for cerebrospinal fluid analytes, molecular imaging of cerebral fibrillar β‐amyloid with positron emission tomography, magnetic resonance imaging–based brain structures, and clinical/cognitive outcomes were harmonized across eight AD biomarker studies. Statistical power was estimated. Results The harmonized database included 7779 participants with clinical/cognitive data: 3542 were 18∼65 years at the baseline, 5865 had longitudinal cognitive data for a median of 4.7 years, 2473 participated in the cerebrospinal fluid studies (906 had longitudinal data), 2496 participated in the magnetic resonance imaging studies (1283 had longitudinal data), and 1498 participated in the positron emission tomography amyloid studies (849 had longitudinal data). The database provides adequate power for detecting early biomarker changes, and demonstrates the feasibility of AD prevention trials on middle‐aged individuals. Discussion The harmonized database is an optimum resource to design AD prevention trials decades before symptomatic onset.
The biodiversity of the mycobiome, an important component of the oral microbial community, and the roles of fungal–bacterial and fungal–immune system interactions in the pathogenesis of oral lichen planus (OLP) remain largely uncharacterized. In this study, we sequenced the salivary mycobiome and bacteriome associated with OLP. First, we described the dysbiosis of the microbiome in OLP patients, which exhibits lower levels of fungi and higher levels of bacteria. Significantly higher abundances of the fungi Candida and Aspergillus in patients with reticular OLP and of Alternaria and Sclerotiniaceae_unidentified in patients with erosive OLP were observed compared to the healthy controls. Aspergillus was identified as an “OLP-associated” fungus because of its detection at a higher frequency than in the healthy controls. Second, the co-occurrence patterns of the salivary mycobiome–bacteriome demonstrated negative associations between specific fungal and bacterial taxa identified in the healthy controls, which diminished in the reticular OLP group and even became positive in the erosive OLP group. Moreover, the oral cavities of OLP patients were colonized by dysbiotic oral flora with lower ecological network complexity and decreased fungal–Firmicutes and increased fungal–Bacteroidetes sub-networks. Third, several keystone fungal genera (Bovista, Erysiphe, Psathyrella, etc.) demonstrated significant correlations with clinical scores and IL-17 levels. Thus, we established that fungal dysbiosis is associated with the aggravation of OLP. Fungal dysbiosis could alter the salivary bacteriome or may reflect a direct effect of host immunity, which participates in OLP pathogenesis.
Not Available
Sunlight drives photosynthesis and associated biological processes, and also influences inorganic processes that shape Earth’s climate and geochemistry. Bacterial solar-to-chemical energy conversion on this planet evolved to use an intricate intracellular process of phototrophy. However, a natural nonbiological counterpart to phototrophy has yet to be recognized. In this work, we reveal the inherent “phototrophic-like” behavior of vast expanses of natural rock/soil surfaces from deserts, red soils and karst environments, all of which can drive photon-to-electron conversions. Using scanning electron microscopy, transmission electron microscopy, micro-Raman spectroscopy and X-ray absorption spectroscopy, Fe and Mn (oxyhydr)oxide-rich coatings were found in rock varnishes, as were Fe (oxyhydr)oxides on red soil surfaces and minute amounts of Mn oxides on karst rock surfaces. By directly fabricating a photoelectric detection device on the thin section of a rock varnish sample, we have recorded the first in situ photocurrent micromapping of the coatings, which behave as highly sensitive and stable photoelectric systems. Additional measurements of red soil and powder separated from the outermost surface of karst rocks yielded photocurrents that are also sensitive to irradiation. The prominent solar-responsive capability of the phototrophic-like rocks/soils is ascribed to the semiconducting Fe and Mn (oxyhydr)oxide mineral coatings. The native semiconducting Fe/Mn-rich coatings may play a role similar in part to photosynthetic systems and thus provide a distinctive driving force for redox (bio)geochemistry on Earth’s surfaces.
Not Available
Updated on 2021/07/01 Add python codes for data processing of the NASS yield data, PRISM climate data, RMA insurance data, agmip yield simulation data, and related geospatial analysis-------------------This repository is for the datasets and codes for “Excessive rainfall leads to maize yield loss of a comparable magnitude to extreme drought in the United States” (Li et al. 2019 GCB). The datasets include maize yield, climate data, maize yield loss from crop insurance data in the US, etc. The datasets can reproduce the results of the paper and they can also be reused to explore other topics. Please cite Li et al (2019) or acknowledge this dataset (DOI: 10.6084/m9.figshare.7581473) when using it.
A bottleneck for the large-scale application of today’s batteries is low lithium storage capacity, largely due to the use of intercalation-type electrodes that allow one or less electron transfer per redox center. An appealing alternative is multi-electron transfer electrodes, offering excess capacity through conversion reaction; however, such type of electrodes suffer from low cyclability, which has been mostly attributed to the collapse of the host upon conversion.
Fused deposition modeling (FDM) has become one of the most extensively used additive manufacturing technologies in recent years because of its wide adaptability, simple mechanism and low cost. It is difficult, however, to achieve an equitable trade-off among mechanical properties, surface finish quality and production time, which is an area seldom explored. This paper concentrates on the optimization of the parameters to achieve higher tensile strength and lower surface roughness with less build time during the FDM process based on central composite design for the tensile specimen forming process. The effects of five extrusion parameters (nozzle diameter, liquefier temperature, extrusion velocity, filling velocity and layer thickness) on the three outputs of tensile strength (TS), surface roughness (SR) and build time (BT) are investigated. Response surface methodology combined with nondominated sorting genetic algorithm II is developed to optimize the process parameters to achieve the maximum TS, minimum SR and BT, as verified by subsequent experiments. The predicted results are found to be very close to the experimental data, illustrating that the presented approach in this paper is effective for improving mechanical properties, surface finish and efficiency of the FDM process.
Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN–TM, x = 1–4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of –0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the OER with a low computed overpotential of –0.39 V, which are comparable to those of noble metal catalysts, indicating superior HER and OER performance of N–Co co-doped graphenes. The results shed light on the potential applications of TM and N co-doped graphenes as efficient single-atom bifunctional catalysts for water splitting, thereby functioning as promising candidates for hydrogen/oxygen production.
Compounds, powders, and cathode active materials that can be used in lithium ion batteries are described herein. Methods of making such compounds, powders, and cathode active materials are described.
Compounds, powders, and cathode active materials that can be used in lithium ion batteries are described herein. Methods of making such compounds, powders, and cathode active materials are described.
The electrochemical performance of SiO-SnCoC composite anode for high-energy lithium-ion batteries was evaluated with particular emphasis on the impact of Alginate as a polymeric binder, as well as fluoroethylene carbonate (FEC) as electrolyte additive. It was found that the presence of FEC and the use of alginate pH3 as binder help to improve the electrochemical stability of the composite anode, showing the best electrochemical performance with a high specific capacity, great capacity retention, and excellent coulombic efficiency. Specifically, the high precision self-discharge current study revealed that the alginate binder slowed down the parasitic reactions between the lithiated anode and the non-aqueous electrolyte.