Search NASA⌕ Search

Engineering topics

Li, Yanan

Publications and source records attributed to Li, Yanan.

Inelastic Deformation in Methylammonium Lead Iodide Perovskite and Mitigation by Additives during Thermal Cycling

Metal halide perovskite thin films are promising materials for next-generation photovoltaic applications, but the thermomechanical instabilities of these materials are critical barriers to device longevity. In this study, we measure the evolution of stresses in methylammonium lead iodide (MAPbI3) films thermally cycled from 25 to 105 °C using a multibeam optical stress sensor (MOSS) system. We demonstrate that these films undergo residual stress buildup due to inelastic deformation as well as a simple mitigation strategy by incorporating low concentrations of 5-aminovaleric acid hydrochloride (5-AVACl) as an additive. Adding 5-AVACl increases the tensile stresses measured at room temperature but beneficially decreases the biaxial modulus from 9.60 ± 0.44 GPa to 7.95 ± 0.55 GPa, resulting in greater accommodation of thermal stresses. The hysteresis loop is ~63% smaller with the inclusion of 5-AVACl, and the stress relaxation at 50 °C decreases from 86.46 to 51.49 MPa. The larger stress relaxation in pristine MAPbI 3 is correlated with grain boundary opening after five cycles, while the inclusion of 5-AVACl mitigates this degradation. Furthermore, our findings underscore the importance of studying the dynamic response of perovskite films during thermal cycling and lay the foundation for further exploration into the mechanisms governing the thermomechanical behavior of perovskite thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous magnetothermoelectric behavior in massive Dirac materials

Extensive studies of electron transport in Dirac materials have shown positive magnetoresistance (MR) and positive magnetothermopower (MTP) in a magnetic field perpendicular to the excitation current or thermal gradient. In contrast, measurements of electron transport often show a negative longitudinal MR and negative MTP for a magnetic field oriented along the excitation current or thermal gradient; this is attributed to the chiral anomaly in Dirac materials. In this paper, we report a very different magnetothermoelectric transport behavior in the massive Dirac material ZrTe5. Although thin flakes show a commonly observed positive MR in a perpendicular magnetic field, distinct from other Dirac materials, we observe a sharp negative MTP. In a parallel magnetic field, we still observe a negative longitudinal MR, however, a remarkable positive MTP is observed for the fields parallel to the thermal gradients. Our theoretical calculations suggest that this anomalous magnetothermoelectric behavior can be attributed to the screened Coulomb scattering. This work demonstrates the significance of impurity scattering in the electron transport of topological materials and provides deep insight into the magnetotransport phenomena in Dirac materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Addressing Chemical and Thermomechanical Instabilities in Metal Halide Perovskites Across Length Scales

The chemical and thermomechanical instabilities of metal halide perovskites represent barriers to long operational lifetimes of perovskite-based devices. There is no single magic bullet to address these instabilities, and so multiple complementary strategies must be undertaken. I will discuss the work by our research group to address these instabilities at multiple length scales, including the effects of the molecular structure and functionality of additives on their interactions with perovskite surfaces, the enhancement of mechanical toughness of perovskite layers by compositing with polymeric nanofibers, and the use of confined volume printing to rapidly produce perovskite films with large grains and reduced surface area of grain boundaries detrimental to stability. Together, these approaches provide one possibly pathway toward significantly increasing the operational lifetimes of perovskite-based devices.

Printz, Adam↗

Scalable Approaches to Address Thermomechanical and Chemical Instabilities in Metal Halide Perovskites

We will discuss our group’s recent efforts to address the thermomechanical and chemical instabilities of metal halide perovskites through multiple approaches. These approaches cover several length scales and aim to provide better understanding of behavior in all stages of processing—i.e., precursor behavior in inks, growth behavior of films during printing, and resulting optoelectronic properties and robustness of perovskite films and devices. We will highlight our efforts toward scalable printing of high-quality perovskite using the method recently invented by our group restricted area printing by ink drawing (RAPID). Additionally, we will discuss how molecular additives in precursor inks can influence the stability of the inks and resultant films. Finally, we will also describe our recent progress in addressing the poor mechanical toughness of perovskite using multifunctional nanofiber reinforcements. Together, all of these concepts are complimentary and compatible with scalable printing of perovskites and a necessary step towards developing a viable technology with long operational lifetimes.

Printz, Adam↗

Induced anomalous Hall effect of massive Dirac fermionsin ZrTe 5 and HfTe 5 thin flakes

Research on the anomalous Hall effect (AHE) has been lasting for a century to make clear the underlying physical mechanism. Generally, the AHE appears in magnetic materials, in which the extrinsic process related to scattering effects and intrinsic contribution connected with Berry curvature are crucial. Recently, AHE has been counterintuitively observed in nonmagnetic topological materials and attributed to the existence of Weyl points. However, the Weyl point scenario would lead to unsaturated AHE even in large magnetic fields and contradicts the saturation of AHE in several tesla (T) in experiments. In this work, we investigate the Hall effect of ZrTe 5 and HfTe 5 thin flakes in static ultrahigh magnetic fields up to 33 T. We find the AHE saturates to 55(70)Ω 1 cm 1 for ZrTe 5 (HfTe 5 ) thin flakes above ~10T. Combining detailed magnetotransport experiments and Berry curvature calculations, we clarify that the splitting of massive Dirac bands without Weyl points can be responsible for AHE in nonmagnetic topological materials ZrTe 5 and HfTe 5 thin flakes. This model can identify our thin flake samples to be weak topological insulators and serve as a tool to probe the band structure topology in topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Capping layer influence and isotropic in-plane upper critical field of the superconductivity at the FeSe / SrTiO 3 interface

Understanding the superconductivity at the interface of FeSe/SrTiO 3 is a problem of great contemporary interest due to the significant increase in critical temperature (T c ) compared to that of bulk FeSe, as well as the possibility of an unconventional pairing mechanism and topological superconductivity. We report a study of the influence of a capping layer on superconductivity in thin films of FeSe grown on SrTiO 3 using molecular beam epitaxy. We used in vacuo four-probe electrical resistance measurements and ex situ magnetotransport measurements to examine the effect of three capping layers that provide distinct charge transfer into FeSe: insulating FeTe, nonmetallic Te, and metallic Zr. Our results show that FeTe provides an optimal cap that barely influences the inherent T c found in pristine FeSe/SrTiO 3 , while the transfer of holes from a nonmetallic Te cap completely suppresses superconductivity and leads to insulating behavior. Finally, we used ex situ magnetoresistance measurements in FeTe capped FeSe films to extract the angular dependence of the in-plane upper critical magnetic field. Our observations reveal an almost isotropic in-plane upper critical field, providing insight into the symmetry and pairing mechanism of high-temperature superconductivity in FeSe.

36 MATERIALS SCIENCE↗

Tunable discrete scale invariance in transition-metal pentatelluride flakes

Log-periodic quantum oscillations discovered in transition-metal pentatelluride give a clear demonstration of discrete scale invariance (DSI) in solid-state materials. The peculiar phenomenon is convincingly interpreted as the presence of two-body quasi-bound states in a Coulomb potential. However, the modifications of the Coulomb interactions in many-body systems having a Dirac-like spectrum are not fully understood. Here, we report the observation of tunable log-periodic oscillations and DSI in ZrTe 5 and HfTe 5 flakes. By reducing the flakes thickness, the characteristic scale factor is tuned to a much smaller value due to the reduction of the vacuum polarization effect. The decreasing of the scale factor demonstrates the many-body effect on the DSI, which has rarely been discussed hitherto. Furthermore, the cut-offs of oscillations are quantitatively explained by considering the Thomas-Fermi screening effect. Finally, our work clarifies the many-body effect on DSI and paves a way to tune the DSI in quantum materials.

36 MATERIALS SCIENCE↗

Unconventional Hall effect induced by Berry curvature

Berry phase and Berry curvature play a key role in the development of topology in physics and do contribute to the transport properties in solid state systems. In this paper, we report the finding of novel nonzero Hall effect in topological material ZrTe 5 flakes when the in-plane magnetic field is parallel and perpendicular to the current. Surprisingly, both symmetric and antisymmetric components with respect to magnetic field are detected in the in-plane Hall resistivity. Further theoretical analysis suggests that the magnetotransport properties originate from the anomalous velocity induced by Berry curvature in a tilted Weyl semimetal. Our work not only enriches the Hall family but also provides new insights into the Berry phase effect in topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗