Search NASA⌕ Search

Engineering topics

Li, Yang

Publications and source records attributed to Li, Yang.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Seasonal stabilization effects slowed the greening of the Northern Hemisphere over the last two decades

Rising atmospheric CO₂ and warming spring temperatures increase vegetation growth and the terrestrial carbon sink. However, drought, heat stress, phenology, and resource limitations may stabilize or limit theses projected increases. We investigate the balance between these amplifying and stabilizing ecological factors by asking whether enhanced early-season growth leads to continued late-season growth. Using the Moderate Resolution Imaging Spectroradiometer (MODIS) leaf area index (LAI) dataset, we identify three seasonal growth patterns based on early- and peak-season positive LAI anomalies: (1) amplification, where late-season LAI anomalies exceed earlier ones; (2) weak stabilization, where late-season anomalies remain similar or slightly lower; and (3) strong stabilization, where late-season anomalies become negative. Weak and strong stabilization events dominate across 67% and 26% of Northern Hemisphere ecosystems above 30°N, respectively. The absence of any trend in amplifying or stabilizing events suggests stabilizing factors seasonally offset CO₂ and temperature-induced spring greening. Terrestrial biosphere models underestimate strong stabilization and overestimate amplification events. This inconsistency arises from the models’ underestimation late-season LAI sensitivity to precipitation in water-limited regions; overlook negative legacy effects of early enhanced LAI on late-season soil moisture via evapotranspiration losses in energy-limited regions. Our findings suggest water/heat stress and resource limitations limit greening and the land carbon sink.

Zhang, Wen↗
DOE OSTI2024

A spatially-resolved model of neutron-irradiated tungsten coupling stochastic cluster dynamics and finite deformation plasticity

Structural materials used in nuclear reactors face severe degradation in mechanical properties, such as hardening and embrittlement. At the microscopic scale, this occurs due to creation and accumulation of irradiation-induced defects and their interaction with system dislocations. Although techniques exist which can model evolution of irradiation defects, for instance kinetic transport theory-based models, their interaction with mechanical deformation of the bulk material has not been investigated extensively. In this work, we demonstrate a novel spatially-resolved multiscale coupling between microscopic irradiation defect evolution, modeled using Stochastic Cluster Dynamics (SCD) and macroscopic mechanical deformation modeled using a finite-deformation plasticity model. SCD is used to determine the statistically averaged defect cluster spacing, dependent on operating conditions such as irradiation dose and temperature. This acts as an initial condition that governs the critical resolved shear stress of dislocation glide in the macroscopic plasticity model. This framework is used to predict mechanical behavior in post-mortem test of irradiated Tungsten samples, which has found its importance as structural material used in nuclear reactors. The results obtained using the coupled approach are in good agreement with experimental data of uniaxial tension tests. The model is able to capture the effect of temperature and irradiation dose on the material hardening. Two methods are proposed to estimate hardness – using Tabor's Law relating uniaxial yield stress to hardness and from flat-punch simulations. The results are in reasonable agreement with hardness data from micro-indentation experiments of irradiated Tungsten samples. Finally, the model is also able to reveal microstructural details such as spatial variation in defect density and local stress.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries

Abstract Rechargeable solid‐state sodium metal batteries (SSMBs) experience growing attention owing to the increased energy density (vs Na‐ion batteries) and cost‐effective materials. Inorganic sulfide‐based Na‐ion conductors also possess significant potential as promising solid electrolytes (SEs) in SSMBs. Nevertheless, due to the highly reactive Na metal, poor interface compatibility is the biggest obstacle for inorganic sulfide solid electrolytes such as Na 3 SbS 4 to achieve high performance in SSMBs. To address such electrochemical instability at the interface, new design of sulfide SE nanostructures and interface engineering are highly essential. In this work, a facile and straightforward approach is reported to prepare 3D sulfide‐based solid composite electrolytes (SCEs), which utilize porous Na 3 SbS 4 (NSS) as a self‐templated framework and fill with a phase transition polymer. The 3D structured SCEs display obviously improved interface stability toward Na metal than pristine sulfide. The assembled SSMBs (with TiS 2 or FeS 2 as cathodes) deliver outstanding electrochemical cycling performance. Moreover, the cycling of high‐voltage oxide cathode Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) is also demonstrated in SSMBs using 3D sulfide‐based SCEs. This study presents a novel design on the self‐templated nanostructure of SCEs, paving the way for the advancement of high‐energy sodium metal batteries.

Guo, Xiaolin↗
DOE OSTI2024

Spin-dependent electron transfer in electrochemically transparent van der Waals heterostructures for oxygen evolution reaction

Spin selective catalysis is an emerging approach for improving the thermodynamics and kinetics of reactions. The role of electron spins has been scarcely studied in catalytic reactions. One exception is the oxygen evolution reaction (OER) where strongly correlated metals and oxides are used as catalysts. In OER, spin alignment facilitates the transition of singlet state of the reactant to the triplet state of O 2 . However, the influence of strong correlations on spin exchange mechanism and spin selective thermodynamics of most catalytic reactions remain unclear. Here we decouple the strongly correlated catalyst from the electrolyte to study spin exchange in two-dimensional (2D) magnetic iron germanium telluride (FGT) heterostructure. We demonstrate that transmission of spin and electrochemical information between the catalyst and the reactant can occur through quantum exchange interaction despite the catalyst of FGT being completely encapsulated by graphene or hexagonal boron nitride (hBN). The strong correlations in FGT that lead to enhanced spin exchange in OER are observed in graphene or hBN layers with thicknesses of up to 6 nm. We demonstrate that spin alignment in FGT leads to a lowering of thermodynamic barrier for adsorption of hydroxide ion and electron transfer to the catalyst. This results in up to fivefold enhancement in OER performance and improved kinetics. Our results provide clear evidence that transmission of both quantum mechanical and electrochemical information through quantum spin exchange interaction in FGT leads to an enhancement in catalytic performance.

2D materials↗
DOE OSTI2024

Strategically designed metal-free deep-ultraviolet birefringent crystals with superior optical properties

Finding new birefringent materials with deep-ultraviolet (DUV, λ < 200 nm) transparency is urgent, as current commercial materials cannot meet the rapidly growing demands in related application fields. Herein, three guanidinium-based compounds, C(NH 2 ) 3 CH 3 SO 3 , β-C(NH 2 ) 3 Cl, and γ-C(NH 2 ) 3 Cl, all featuring [C(NH 2 ) 3 ·X] ∞ (X = CH 3 SO 3 and Cl) pseudo layers, were designed through structural motif tailoring. Theoretical calculations indicate that these metal-free compounds all possess broad bandgaps (6.49–6.71 eV, HSE06) and remarkable birefringence (cal. 0.166–0.211 @ 1064 nm). Centimeter-sized C(NH 2 ) 3 CH 3 SO 3 crystals have been grown using a feasible aqua-solution method. Subsequently, to further optimize the properties, β/γ-C(NH 2 ) 3 Cl was remolded by further tailoring the [C(NH 2 ) 3 ] + cationic unit and the acceptor Cl - anion, and then the fourth compound NH 2 COF was theoretically constructed. Interestingly, NH 2 COF exhibits the desired coexistence of a wider bandgap (7.87 eV, HSE06) and giant birefringence (cal. 0.241 @ 1064 nm) attributed to its higher density of well-aligned birefringence-active groups (BAGs). Furthermore, among these four designed compounds, C(NH 2 ) 3 CH 3 SO 3 has been experimentally synthesized and exhibits a short UV cutoff edge. Centimeter-sized crystals have been grown using a feasible aqueous solution method. This study provides an effective strategy to optimize the density of BAGs for large birefringence and offers valuable insights into the strategic design of metal-free DUV birefringent crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Targeted protein degradation systems to enhance Wnt signaling

Molecules that facilitate targeted protein degradation (TPD) offer great promise as novel therapeutics. The human hepatic lectin asialoglycoprotein receptor (ASGR) is selectively expressed on hepatocytes. We have previously engineered an anti-ASGR1 antibody-mutant RSPO2 (RSPO2RA) fusion protein (called SWEETS) to drive tissue-specific degradation of ZNRF3/RNF43 E3 ubiquitin ligases, which achieved hepatocyte-specific enhanced Wnt signaling, proliferation, and restored liver function in mouse models, and an antibody–RSPO2RA fusion molecule is currently in human clinical trials. In the current study, we identified two new ASGR1- and ASGR1/2-specific antibodies, 8M24 and 8G8. High-resolution crystal structures of ASGR1:8M24 and ASGR2:8G8 complexes revealed that these antibodies bind to distinct epitopes on opposing sides of ASGR, away from the substrate-binding site. Both antibodies enhanced Wnt activity when assembled as SWEETS molecules with RSPO2RA through specific effects sequestering E3 ligases. In addition, 8M24-RSPO2RA and 8G8-RSPO2RA efficiently downregulate ASGR1 through TPD mechanisms. These results demonstrate the possibility of combining different therapeutic effects and degradation mechanisms in a single molecule.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Low-temperature Leidenfrost-like jumping of sessile droplets on microstructured surfaces

The Leidenfrost effect—the levitation and hovering of liquid droplets on hot solid surfaces—generally requires a sufficiently high substrate temperature to activate liquid vaporization. Here, in this paper, we report the modulation of Leidenfrost-like jumping of sessile water microdroplets on micropillared surfaces at a relatively low temperature. Compared to traditional Leidenfrost effect occurring above 230 °C, the fin-array-like micropillars enable water microdroplets to levitate and jump off the surface within milliseconds at a temperature of 130 °C by triggering the inertia-controlled growth of individual vapour bubbles at the droplet base. We demonstrate that droplet jumping, resulting from momentum interactions between the expanding vapour bubble and the droplet, can be modulated by tailoring of the thermal boundary layer thickness through pillar height. This enables regulation of the bubble expansion between the inertia-controlled mode and the heat-transfer-limited mode. The two bubble-growth modes give rise to distinct droplet jumping behaviours characterized by constant velocity and constant energy regimes, respectively. This heating strategy allows the straightforward purging of wetting liquid droplets on rough or structured surfaces in a controlled manner, with potential applications including the rapid removal of fouling media, even when located in surface cavities.

42 ENGINEERING↗
DOE OSTI2024

State-of-the-Art Medium- and High-Voltage Silicon Carbide Power Modules, Challenges and Mitigation Techniques: A Review

Silicon carbide (SiC) power modules have been demonstrated potential for improving power density and efficiency for low-voltage power electronics systems. This has resulted in a paradigm shift toward development of medium-voltage and high-voltage (MV/HV) SiC power modules to revolutionize the future power grid and transportation systems. However, designing MV/HV SiC power modules involves significant design challenges due to higher blocking voltage and exacerbation of side effects due to high switching dv/dt and di/dt of SiC devices-concerns that may not be as critical as in low-voltage module development. This article reviews the development of state-of-the-art MV/HV SiC power modules, ranging from 3.3 kV to 40 kV, from both industry and academia. First, a discussion on SiC modules based on voltage level is presented. This is followed by a discussion of challenges associated with designing and testing MV/HV modules- including parasitic controls, electromagnetic interference (EMI), partial discharge, and thermal management-and the corresponding mitigation approaches from various perspectives. We conclude with a summary of major findings and future directions for the development of MV/HV modules.

EMI↗
DOE OSTI2023

From electronic structure to model application of key reactions for gasoline/alcohol combustion: Hydrogen-atom abstraction by $CH_3O\dot{O}$ radicals

Hydrogen atom abstraction by methyl peroxy ($CH_3O\dot{O}$) radicals can play an important role in gasoline/ethanol interacting chemistry for fuels that produce high concentrations of methyl radicals. Detailed kinetic reactions for hydrogen atom abstraction by $CH_3O\dot{O}$ radicals from the components of FGF-LLNL (a gasoline surrogate) including cyclopentane, toluene, 1-hexene, n -heptane, and isooctane have been systematically studied in this work. Here, the M06-2X/6-311 ++ G(d,p) level of theory was used to obtain the optimized structure and vibrational frequency for all stationary points and the low-frequency torsional modes. The 1-D hindered rotor treatment for low-frequency torsional modes was treated at M06-2X/6-31G level of theory. The UCCSD(T)-F12a/cc-pVDZ-F12 and QCISD(T)/CBS level of theory were used to calculate single point energies for all species. High pressure limiting rate constants for all hydrogen atom abstraction channels were performed using conventional transition state theory with unsymmetric tunneling corrections. Individual rate constants are reported in the temperature range from 298.15 to 2000 K. Our computed results show that the abstraction of allylic hydrogen atoms from 1-hexene is the fastest at low temperatures. When the temperature increases, the hydrogen atom abstraction reaction channel at the primary alkyl site gradually becomes dominant. Thermodynamics properties for all stable species and high-pressure limiting rate constants for each reaction pathway obtained in this work were incorporated into the latest gasoline surrogate/ethanol model to investigate the influence of the rate constants calculated here on model predicted ignition delay times.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Bioadhesive polymer semiconductors and transistors for intimate biointerfaces

The use of bioelectronic devices relies on direct contact with soft biotissues. For transistor-type bioelectronic devices, the semiconductors that need to have direct interfacing with biotissues for effective signal transduction do not adhere well with wet tissues, thereby limiting the stability and conformability at the interface. Here we report a bioadhesive polymer semiconductor through a double-network structure formed by a bioadhesive brush polymer and a redox-active semiconducting polymer. The resulting semiconducting film can form rapid and strong adhesion with wet tissue surfaces together with high charge-carrier mobility of ~1 square centimeter per volt per second, high stretchability, and good biocompatibility. Further fabrication of a fully bioadhesive transistor sensor enabled us to produce high-quality and stable electrophysiological recordings on an isolated rat heart and in vivo rat muscles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Achieving tissue-level softness on stretchable electronics through a generalizable soft interlayer design

Soft and stretchable electronics have emerged as highly promising tools for biomedical diagnosis and biological studies, as they interface intimately with the human body and other biological systems. Most stretchable electronic materials and devices, however, still have Young’s moduli orders of magnitude higher than soft bio-tissues, which limit their conformability and long-term biocompatibility. Here, we present a design strategy of soft interlayer for allowing the use of existing stretchable materials of relatively high moduli to versatilely realize stretchable devices with ultralow tissue-level moduli. We have demonstrated stretchable transistor arrays and active-matrix circuits with moduli below 10 kPa—over two orders of magnitude lower than the current state of the art. Benefiting from the increased conformability to irregular and dynamic surfaces, the ultrasoft device created with the soft interlayer design realizes electrophysiological recording on an isolated heart with high adaptability, spatial stability, and minimal influence on ventricle pressure. In vivo biocompatibility tests also demonstrate the benefit of suppressing foreign-body responses for long-term implantation. With its general applicability to diverse materials and devices, this soft-interlayer design overcomes the material-level limitation for imparting tissue-level softness to a variety of bioelectronic devices.

42 ENGINEERING↗
DOE OSTI2023

Extend an innovative HPC-Compatible Multiple Temporal-spatial Resolution Concurrent Finite Element Modeling Approach to Guide Laser Powder Bed Fusion Additive

Laser power bed fusing (PBF) additive manufacturing is a key enabling technology to manufacture highly complex and integrated automotive structures. However, the geometric complexity of PBF-AM technique also leads to highly non-uniform heating and cooling rate in the manufactured part, which may cause flaw formation and produce excessive and nonuniform residual stresses, which increase quality uncertainties and manufacture issues, leading to increases in cost and energy consumption in the form of rejected parts. In this research project, we developed an innovative Multi-Spatial-Temporal-Resolution Finite Element (MUST-FE) method and completed the corresponding high performance computation (HPC) platform-based in-house code, which enables high accuracy prediction of temperature and residual stress fields for component-scale PBF-AM manufacture in efficient computation time. The MUST-FE model is calibrated and validated with a “2D pad” AlSi10Mg experiments by matching the melt pool shape and dimension, and with a “XY-cross” AlSi10Mg experiment by matching the thermal distortion and residual stress. The innovative multi-resolution and concurrent modeling approach adopted in this code ensures accuracy and computational efficiency, which will enable energy-efficient and high-yield, low-cost manufacturing of optimized, qualifiable automotive structures and contribute towards reaching technical targets outlined in AMO’s Program Plan to develop additive manufacturing systems that deliver consistently reliable parts with predictable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A guide to the BRAIN Initiative Cell Census Network data ecosystem

Characterizing cellular diversity at different levels of biological organization and across data modalities is a prerequisite to understanding the function of cell types in the brain. Classification of neurons is also essential to manipulate cell types in controlled ways and to understand their variation and vulnerability in brain disorders. The BRAIN Initiative Cell Census Network (BICCN) is an integrated network of data-generating centers, data archives, and data standards developers, with the goal of systematic multimodal brain cell type profiling and characterization. Emphasis of the BICCN is on the whole mouse brain with demonstration of prototype feasibility for human and nonhuman primate (NHP) brains. Here, we provide a guide to the cellular and spatial approaches employed by the BICCN, and to accessing and using these data and extensive resources, including the BRAIN Cell Data Center (BCDC), which serves to manage and integrate data across the ecosystem. We illustrate the power of the BICCN data ecosystem through vignettes highlighting several BICCN analysis and visualization tools. Finally, we present emerging standards that have been developed or adopted toward Findable, Accessible, Interoperable, and Reusable (FAIR) neuroscience. The combined BICCN ecosystem provides a comprehensive resource for the exploration and analysis of cell types in the brain.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Highly Conductive Iodine and Fluorine Dual-Doped Argyrodite Solid Electrolyte for Lithium Metal Batteries

Sulfide-type argyrodite solid electrolytes (SEs) with halide doping have attracted serious interest. Although other halides such as Cl and Br have been found to enhance Li-ion transport in argyrodites, the direct synthesis of efficiently conductive Li 6 PS 5 I without postprocessing has rarely been investigated. In this work, we report the one-step synthesis of highly conductive Li 6 PS 5 I with an impressive ionic conductivity of 2.5 × 10 –4 S cm –1 at room temperature through a solvent-based method. Moreover, by introducing F – to partially replace I – , hybrid-doped argyrodites Li 6 PS 5 F x I 1–x (x = 0.25, 0.5, 0.75) have been synthesized. Li 6 PS 5 F 0.25 I 0.75 achieves the highest conductivity of 3.5 × 10 –4 S cm –1 due to the energetic preference for anion-disordering among F – /I – and S 2– , which facilitate faster Li transport as supported by density functional theory (DFT) calculations. With higher F content in argyrodites, Li 6 PS 5 F 0.75 I 0.25 displays the best electrochemical stability toward Li metal, as evidenced by long-term stable cycling in Li symmetric cells up to 1100 h. Solid-state Li metal batteries with an active cathode of Li 4 Ti 5 O 12 (LTO) display an initial specific capacity of 140 mAh g –1 and remain at 105 mAh g –1 after 200 cycles, suggesting great battery cycling performance. Furthermore, this research has developed new compositions in the argyrodite SE family which could lead to advancements in the development of solid-state Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Solvent-free and low temperature synthesis of chalcogenide Na superionic conductors for solid-state batteries

Sodium chalcogenide ionic conductors are attractive candidates as solid electrolytes (SEs) in solid-state Na metal batteries. They show the advantages of high ionic conductivity of 10 –4 –10 –2 S cm –1 at room temperature and great chemical stability in air. However, simple, efficient, and scalable approaches for the synthesis of chalcogenide solid electrolytes (SEs) are required. In this work, we report a solvent-free mixing to form dry intermediate products, which are subjected to different treatments (electron-beam assisted method or low temperature heating (≤150 °C)) to produce pure phase of Na 3 SbS 4-y Se y (0 ≤ y < 2) chalcogenides. Heavy Se-doping in Na 3 SbS 4 results in the tetragonal-to-cubic phase transition as well as a significant change of Sb-S bonding in Raman spectra. Among all chalcogenide SEs, Na 3 SbS 3 Se showed the highest ionic conductivity of 3.75 × 10 –4 S cm –1 at room temperature, 47% higher than that of pristine Na 3 SbS 4 . Moreover, the Se-dopant also enhanced the electrochemical stability towards Na metal in solid-state batteries. The solid-state Na||FeS 2 battery with Na 3 SbS 3 Se SE displayed long-term cycling ability up to 1,000 cycles within the voltage window of 1.0–2.7 V and retained a specific capacity of 105 mAh g –1 after 600 cycles. As a result, this technique promotes the practical applications of chalcogenide SEs in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

High-efficiency stretchable light-emitting polymers from thermally activated delayed fluorescence

Stretchable light-emitting materials are the key components for realizing skin-like displays and optical biostimulation. All the stretchable emitters reported to date, to the best of our knowledge, have been based on electroluminescent polymers that only harness singlet excitons, limiting their theoretical quantum yield to 25%. Here we present a design concept for imparting stretchability onto electroluminescent polymers that can harness all the excitons through thermally activated delayed fluorescence, thereby reaching a near-unity theoretical quantum yield. We show that our design strategy of inserting flexible, linear units into a polymer backbone can substantially increase the mechanical stretchability without affecting the underlying electroluminescent processes. As a result, our synthesized polymer achieves a stretchability of 125%, with an external quantum efficiency of 10%. Additionally, we demonstrate a fully stretchable organic light-emitting diode, confirming that the proposed stretchable thermally activated delayed fluorescence polymers provide a path towards simultaneously achieving desirable electroluminescent and mechanical characteristics, including high efficiency, brightness, switching speed and stretchability as well as low driving voltage.

36 MATERIALS SCIENCE↗