Search NASA⌕ Search

Engineering topics

Li, Yutao

Publications and source records attributed to Li, Yutao.

At least 19 records

Electronic interactions in Dirac fluids visualized by nano-terahertz spacetime interference of electron-photon quasiparticles

Ultraclean graphene at charge neutrality hosts a quantum critical Dirac fluid of interacting electrons and holes. Interactions profoundly affect the charge dynamics of graphene, which is encoded in the properties of its electron-photon collective modes: surface plasmon polaritons (SPPs). Here, we show that polaritonic interference patterns are particularly well suited to unveil the interactions in Dirac fluids by tracking polaritonic interference in time at temporal scales commensurate with the electronic scattering. Spacetime SPP interference patterns recorded in terahertz (THz) frequency range provided unobstructed readouts of the group velocity and lifetime of polariton that can be directly mapped onto the electronic spectral weight and the relaxation rate. Our data uncovered prominent departures of the electron dynamics from the predictions of the conventional Fermi-liquid theory. The deviations are particularly strong when the densities of electrons and holes are approximately equal. The proposed spacetime imaging methodology can be broadly applied to probe the electrodynamics of quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

All-solid-state batteries with sulfide electrolytes and high-nickel layered oxide cathodes attract much interest due to their high specific energy. However, their cycling performance is primarily influenced by the interface between the sulfide electrolyte and the high-Ni layered oxide particles, which requires the use of composite cathodes with high ionic and electronic conductivities to achieve a kinetically stable interface inside the cathode. Here, we apply Ti 2 O 3 particles to the high-Ni cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), where Ti 2 O 3 not only acts as an electronic conductor to provide a fast diffusion path for electrons in the composite cathode, but also absorbs the lattice oxygen released from NCM811 cathode during cycling, stabilizing the Li 6 PS 5 Cl/NCM811 interface and suppressing electrolyte oxidation. The as-modified cathode exhibits an initial specific capacity of 192 mAh g -1 and retains 166 mAh g -1 after 140 cycles at 0.1C rate with a good capacity retention of 86.5%. Furthermore, the composite cathode displays high rate capability even at 1C rate. By contrast, the unmodified Li 6 PS 5 Cl/NCM811 cathode shows poor cycling performance with only 130 mAh g -1 remaining after 130 cycles. This work provides a new direction for the design of cathodes for all-solid-state batteries that can deliver high specific energy with long cycle life.

25 ENERGY STORAGE↗

Ultra‐Thin Single‐Particle‐Layer Sodium Beta‐Alumina‐Based Composite Polymer Electrolyte Membrane for Sodium‐Metal Batteries

Inorganic/organic composite polymer electrolytes (CPEs) with good flexibility and electrode contact have been pursued for solid-state sodium-metal batteries. However, the application of CPEs for high energy density solid-state sodium-metal batteries is still limited by the low Na + conductivity, large thickness, and low ion transference number. Herein, an ultra-thin single-particle-layer (UTSPL) composite polymer electrolyte membrane with a thickness of ≈20 µm straddled by a sodium beta-alumina ceramic electrolyte (SBACE) is presented. A ceramic Na + -ion electrolyte that bridges or percolates across an ultra-thin and flexible polymer membrane provides: 1) the strength and flexibility from the polymer membrane, 2) excellent electrolyte/electrode interfacial contact, and 3) a percolation path for Na + -ion transfer. Owing to this novel design, the obtained UTSPL-35SBACE membrane exhibits a high Na+-ion conductivity of 0.19 mS cm -1 and a transference number of 0.91 at room temperature, contributing to long-term cycling stability of symmetric sodium cells with a small overpotential. The assembled quasi-solid-state cell with the as-prepared UTSPL-35SBACE membrane displays superior cycling performance with a discharge capacity of 105 mAh g -1 at 0.5 °C rate after 100 cycles and excellent rate performance (82 mAh g -1 at 5 °C rate) at room temperature with the potassium manganese hexacyanoferrate (KMHCF)@CNTs/CNFs cathode, where KMHCF refers to potassium manganese hexacyanoferrate.

25 ENERGY STORAGE↗

Li 2 S 6 ‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries

Abstract The integration of Li 2 S 6 within a poly(ethylene oxide) (PEO)‐based polymer electrolyte is demonstrated to improve the polymer electrolyte's ionic conductivity because the strong interplay between O 2− (PEO) and Li + from Li 2 S 6 reduces the crystalline volume within the PEO. The Li/electrolyte interface is stabilized by the in situ formation of an ultra‐thin Li 2 S/Li 2 S 2 layer via the reaction between Li 2 S 6 and lithium metal, which increases the ionic transport at the interface and suppresses lithium dendrite growth. A symmetric Li/Li cell with the Li 2 S 6 ‐integrated composite electrolyte has excellent cyclability and a high critical current density of 0.9 mA cm −2 at 40 °C. Impressive electrochemical performance is demonstrated with all‐solid‐state Li/LiFePO 4 and high‐voltage Li/LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells at 40 °C.

Fang, Ruyi↗

Li 2 S 6 ‐Integrated PEO‐Based Polymer Electrolytes for All‐Solid‐State Lithium‐Metal Batteries

Abstract The integration of Li 2 S 6 within a poly(ethylene oxide) (PEO)‐based polymer electrolyte is demonstrated to improve the polymer electrolyte's ionic conductivity because the strong interplay between O 2− (PEO) and Li + from Li 2 S 6 reduces the crystalline volume within the PEO. The Li/electrolyte interface is stabilized by the in situ formation of an ultra‐thin Li 2 S/Li 2 S 2 layer via the reaction between Li 2 S 6 and lithium metal, which increases the ionic transport at the interface and suppresses lithium dendrite growth. A symmetric Li/Li cell with the Li 2 S 6 ‐integrated composite electrolyte has excellent cyclability and a high critical current density of 0.9 mA cm −2 at 40 °C. Impressive electrochemical performance is demonstrated with all‐solid‐state Li/LiFePO 4 and high‐voltage Li/LiNi 0.8 Mn 0.1 Co 0.1 O 2 cells at 40 °C.

Fang, Ruyi↗

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

By increasing the charging voltage, a cell specific energy of >400 Wh kg-1 is in principle achievable with LiNi0.8Mn0.1Co0.1O2 in lithium-metal batteries (LMBs). However, stable cycling of high-nickel cathodes at ultra-high voltages is extremely challenging. Here we report that a rationally designed sulfonamide-based electrolyte enables stable cycling of commercial LiNi0.8Co0.1Mn0.1O2 with a cut-off voltage up to 4.7 V in LMBs. In contrast to commercial carbonate electrolytes, the electrolyte not only suppresses side reactions, intergranular cracking, transition-metal dissolution, and impedance growth on the cathode side, but also enables highly reversible Li metal stripping and plating leading to compact morphology and low pulverization. Our LMB delivers a specific capacity >230 mAh g-1 and an average Coulombic efficiency >99.65% over 100 cycles. Even under harsh testing conditions, the 4.7 V LMB can retain >88% capacity for 90 cycles, demonstrating significant advances in practical LMBs.

36 MATERIALS SCIENCE↗

NASICON Li 1.2 Mg 0.1 Zr 1.9 (PO 4 ) 3 Solid Electrolyte for an All‐Solid‐State Li‐Metal Battery

Abstract A thin solid electrolyte with a high Li + conductivity is used to separate the metallic lithium anode and the cathode in an all‐solid‐state Li‐metal battery. However, most solid Li‐ion electrolytes have a small electrochemical stability window, large interfacial resistance, and cannot block lithium‐dendrite growth when lithium is plated on charging of the cell. Mg 2+ stabilizes a rhombohedral NASICON‐structured solid electrolyte of the formula Li 1.2 Mg 0.1 Zr 1.9 (PO 4 ) 3 (LMZP). This solid electrolyte has Li‐ion conductivity two orders of magnitude higher at 25 °C than that of the triclinic LiZr 2 (PO 4 ) 3 . 7 Li and 6 Li NMR confirm the Li‐ions in two different crystallographic sites of the NASICON framework with 85% of the Li‐ions having a relatively higher mobility than the other 15%. The anode–electrolyte interface is further investigated with symmetric Li/LMZP/Li cell testing, while the cathode–electrolyte interface is explored with an all‐solid‐state Li/LMZP/LiFePO 4 cell. The enhanced performance of these cells enabled by the Li 1.2 Mg 0.1 Zr 1.9 (PO 4 ) 3 solid electrolyte is stable upon repeated charge/discharge cycling.

Zhou, Qiongyu↗

In Situ Formation of Li 3 P Layer Enables Fast Li + Conduction across Li/Solid Polymer Electrolyte Interface

Abstract Solid‐state polymer electrolytes provide better flexibility and electrode contact than their ceramic counterparts, making them a worthwhile pursuit for all‐solid‐state lithium‐metal batteries. However, their large Li/solid state electrolyte interfacial resistance, small critical current density, and rapid lithium dendrite growth during cycling still limit their viability. Owing to these restrictions, all‐solid‐state cells with solid polymer electrolytes must be cycled above room‐temperature and with a small current density. These problems can be mitigated with an in situ formed artificial solid electrolyte interphase that rapidly conducts Li + ions. Herein, a Li 3 P layer formed in situ at the Li‐metal/solid polymer electrolyte interphase is reported that significantly reduces the electrode/electrolyte interfacial resistance. Additionally, this layer increases the wettability of the solid polymer by the metallic lithium anode, allowing for the critical current density of lithium symmetric cells to be doubled by homogenizing the current density at the interface. All‐solid‐state Li/Li symmetric cells and Li/LiFePO 4 cells with the Li 3 P layer show improved cycling performance with a high current density.

Wu, Nan↗

Enhanced Surface Interactions Enable Fast Li + Conduction in Oxide/Polymer Composite Electrolyte

Abstract Li + ‐conducting oxides are considered better ceramic fillers than Li + ‐insulating oxides for improving Li + conductivity in composite polymer electrolytes owing to their ability to conduct Li + through the ceramic oxide as well as across the oxide/polymer interface. Here we use two Li + ‐insulating oxides (fluorite Gd 0.1 Ce 0.9 O 1.95 and perovskite La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 2.55 ) with a high concentration of oxygen vacancies to demonstrate two oxide/poly(ethylene oxide) (PEO)‐based polymer composite electrolytes, each with a Li + conductivity above 10 −4 S cm −1 at 30 °C. Li solid‐state NMR results show an increase in Li + ions (>10 %) occupying the more mobile A2 environment in the composite electrolytes. This increase in A2‐site occupancy originates from the strong interaction between the O 2− of Li‐salt anion and the surface oxygen vacancies of each oxide and contributes to the more facile Li + transport. All‐solid‐state Li‐metal cells with these composite electrolytes demonstrate a small interfacial resistance with good cycling performance at 35 °C.

Wu, Nan↗

Short O–O separation in layered oxide Na 0.67 CoO 2 enables an ultrafast oxygen evolution reaction

The layered oxide Na 0.67 CoO 2 with Na + occupying trigonal prismatic sites between CoO 2 layers exhibits a remarkably high room temperature oxygen evolution reaction (OER) activity in alkaline solution. The high activity is attributed to an unusually short O–O separation that favors formation of peroxide ions by O - –O – interactions followed by O 2 evolution in preference to the conventional route through surface O–OH – species. The dependence of the onset potential on the pH of the alkaline solution was found to be consistent with the loss of H + ions from the surface oxygen to provide surface O - that may either be attacked by solution OH - or react with another O - ; a short O–O separation favors the latter route. The role of a strong hybridization of the O-2 p and low-spin Co III /Co IV π-bonding d states is also important; the OER on other Co III /Co IV oxides is compared with that on Na 0.67 CoO 2 as well as that on IrO 2 .

Wang, Hao↗

Polar polymer–solvent interaction derived favorable interphase for stable lithium metal batteries

Lithium metal has long been regarded as one of the most promising anode materials for future rechargeable batteries. However, the severe reaction of Li with carbonate electrolytes and the rapid growth of Li-dendrites at high current densities hinder its practical application in Li-metal batteries. In this work, we report a polar polymer protective layer to suppress highly corrosive cyclic carbonates by tuning polymer–solvent interactions. The C≡N groups of polyacrylonitrile (PAN) polymer chains in the polar polymer network can effectively reduce high reactivity of the C=O groups of carbonate solvents leading to a stable solid electrolyte interphase (SEI) layer with higher inorganic components. In situ optical and electron microscopes demonstrate that the polar polymer network effectively restrained the formation and growth of Li-dendrites, which helps to stabilize the plating/stripping behavior of Li in a symmetric Li|Li cell and a Li|LiNi 1/3 Co 1/3 Mn 1/3 O 2 cell. This study provides a useful perspective of controlling electrolyte coordination to form a stable SEI layer in carbonate electrolytes for Li-metal batteries.

25 ENERGY STORAGE↗

High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide)

Flexible and low-cost poly(ethylene oxide) (PEO)-based electrolytes are promising for all-solid-state Li-metal batteries because of their compatibility with a metallic lithium anode. However, the low room-temperature Li-ion conductivity of PEO solid electrolytes and severe lithium-dendrite growth limit their application in high-energy Li-metal batteries. Here we prepared a PEO/perovskite Li 3/8 Sr 7/16 Ta 3/4 Zr 1/4 O 3 composite electrolyte with a Li-ion conductivity of 5.4 × 10 −5 and 3.5 × 10 −4 S cm −1 at 25 and 45 °C, respectively; the strong interaction between the F − of TFSI − (bis-trifluoromethanesulfonimide) and the surface Ta 5+ of the perovskite improves the Li-ion transport at the PEO/perovskite interface. A symmetric Li/composite electrolyte/Li cell shows an excellent cyclability at a high current density up to 0.6 mA cm −2 . A solid electrolyte interphase layer formed in situ between the metallic lithium anode and the composite electrolyte suppresses lithium-dendrite formation and growth. All-solid-state Li|LiFePO 4 and high-voltage Li|LiNi 0.8 Mn 0.1 Co 0.1 O 2 batteries with the composite electrolyte have an impressive performance with high Coulombic efficiencies, small overpotentials, and good cycling stability.

25 ENERGY STORAGE↗