Search NASA⌕ Search

Engineering topics

Li, Z

Publications and source records attributed to Li, Z.

At least 127 records · Page 7

Progress with the Single-Sided Module Prototypes for the ATLAS Tracket Upgrade Stave

The ATLAS experiment is preparing for the planned luminosity upgrade of the LHC (the super-luminous LHC or sLHC) with a programme of development for tracking able to withstand an order of greater magnitude radiation fluence and much greater hit occupancy rates than the current detector. This has led to the concept of an all-silicon tracker with an enhanced performance pixel-based inner region and short-strips for much of the higher radii. Both sub-systems employ many common technologies, including the proposed 'stave' concept for integrated cooling and support. For the short-strip region, use of this integrated stave concept requires single-sided modules mounted on either side of a thin central lightweight support. Each sensor is divided into four rows of 23.82 mm length strips; within each row, there are 1280 strips of 74.5 {mu}m pitch. Well over a hundred prototype sensors are being delivered by Hamamatsu Photonics (HPK) to Japan, Europe and the US. We present results of the first 20 chip ABCN25 ASIC hybrids for these sensors, results of the first prototype 5120 strip module built with 40 ABCN25 read-out ASICs, and the status of the hybrids and modules being developed for the ATLAS tracker upgradestave programme.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Recoiled Proton Tagged Knockout Reaction for {sup 8}He

Recently recoiled proton tagged knockout reaction experiments were carried-out for {sup 8}He at 82 MeV/nucleon. The purpose of the experiment are: (1) Through the core knocked out technique, to study the correlation of the valence neutrons in the ground state of {sup 8}He. This should provide new experimental information to the neutron coupling and neutron matter, including the BCS pairing and BEC pairing. (2) Through the valence neutron knocked out technique, to study the resonant states {sup 7}He and the related single particle states. This will be complementary to the previous similar measurement but with better selection of the reaction mechanism.Some new recoiled proton telescopes and the forward neutron spectrometer was applied in the experiment. Performance of the detection system and very preliminary experimental results are shown here.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MULTI-SPACECRAFT OBSERVATIONS OF THE 2008 JANUARY 2 CME IN THE INNER HELIOSPHERE

We perform a detailed analysis of a coronal mass ejection (CME) on 2008 January 2. The combination of the Solar and Heliospheric Observatory and the twin STEREO spacecraft provides three-point observations of this CME. We track the CME in imaging observations and compare its morphology and kinematics viewed from different vantage points. The shape, angular width, distance, velocity, and acceleration of the CME front are different in the observations of these spacecraft. We also compare the efficiency of several methods, which convert the elongation angles of the CME front in images to radial distances. The results of our kinematic analysis demonstrate that this CME experiences a rapid acceleration at the early stage, which corresponds to the flash phase of the associated solar flare in time. Then, at a height of about 3.7 solar radius, the CME reaches a velocity of 790 km s{sup -1} and propagates outward without an obvious deceleration. Because of its propagation direction away from the observers, the CME is not detected in situ by either ACE or STEREO.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of the Bulk and Strip Characteristics of Large Area n-in-p Silicon Sensors Intended for a Very High Radiation Environment

The ATLAS collaboration R&D group 'Development of n-in-p Silicon Sensors for very high radiation environment' has developed single-sided p-type 9.75 cm x 9.75 cm sensors with an n-type readout strips having radiation tolerance against the 10{sup 15} 1-MeV neutron equivalent (n{sub eq})/cm{sup 2} fluence expected in the Super Large Hadron Collider. The compiled results of an evaluation of the bulk and strip parameter characteristics of 19 new non-irradiated sensors manufactured by Hamamatsu Photonics are presented in this paper. It was verified in detail that the sensors comply with the technical specifications required before irradiation. The reverse bias voltage dependence of various parameters, frequency dependence of tested capacitances, and strip scans of more than 23,000 strips as a test of parameter uniformity and strip quality over the whole sensor area have been carried out at Stony Brook University, Cambridge University, University of Geneva, and Academy of Sciences of CR and Charles University in Prague. No openings, shorts, or pinholes were observed on all tested strips, confirming the high quality of sensors made by Hamamatsu Photonics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of n-on-p Silicon Sensors for Very High Radiation Environments

We have developed a novel and highly radiation-tolerant n-in-p silicon microstrip sensor for very high radiation environments such as in the Super Large Hadron Collider. The sensors are designed for a fluence of 1 x 10{sup 15} neq/cm{sup 2} and are fabricated from p-type, FZ, 6 in. (150 mm) wafers onto which we lay out a single 9.75 cm x 9.75 cm large-area sensor and several 1 cm x 1 cm miniature sensors with various n-strip isolation structures. By evaluating the sensors both pre- and post-irradiation by protons and neutrons, we find that the full depletion voltage evolves to approximately 800 V and that the n-strip isolation depends on the p{sup +} concentration. In addition, we characterize the interstrip resistance, interstrip capacitance and the punch-through-protection (PTP) voltage. The first fabrication batch allowed us to identify the weak spots in the PTP and the stereo strip layouts. By understanding the source of the weakness, the mask was modified accordingly. After modification, the follow-up fabrication batches and the latest fabrication of about 30 main sensors and associated miniature sensors have shown good performance, with no sign of microdischarge up to 1000 V.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Testing of Bulk Radiation Damage of n-in-p Silicon Sensors for Very High Radiation Environments

We are developing n{sup +}-in-p, p-bulk and n-readout, microstrip sensors, fabricated by Hamamatsu Photonics, as a non-inverting radiation hard silicon detector for the ATLAS tracker upgrade at the super-LHC (sLHC) proposed facility. The bulkradiationdamage after neutron and proton irradiations is characterized with the leakage current, charge collection and full depletion voltage. The detectors should provide acceptable signal, signal-to-noise ratio exceeding 15, after the integrated luminosity of 6000 fb{sup -1}, which is twice the sLHC integrated luminosity goal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

X-RAY EMISSION FROM HESS J1731-347/SNR G353.6-0.7 AND CENTRAL COMPACT SOURCE XMMS J173203-344518

We present new results of the HESS J1731-347/SNR G353.6-0.7 system from XMM-Newton and Suzaku X-ray observations and Delinha CO observations. We discover extended hard X-rays coincident with the bright, extended TeV source HESS J1731-347 and the shell of the radio supernova remnant (SNR). We find that spatially resolved X-ray spectra can generally be characterized by an absorbed power-law model, with a photon index of {approx}2, typical of non-thermal emission. A bright X-ray compact source, XMMS J173203-344518, is also detected near the center of the SNR. We find no evidence of a radio counterpart or an extended X-ray morphology for this source, making it unlikely to be a pulsar wind nebular (PWN). The spectrum of the source can be well fitted by an absorbed blackbody with a temperature of {approx}0.5 keV plus a power-law tail with a photon index of {approx}5, reminiscent of the X-ray emission of a magnetar. CO observations toward the inner part of the High Energy Stereoscopic System (HESS) source reveal a bright cloud component at -20 +- 4 km s{sup -1}, which is likely located at the same distance of {approx}3.2 kpc as the SNR. Based on the probable association between the X-ray and gamma-ray emissions and likely association between the CO cloud and the SNR, we argue that the extended TeV emission originates from the interaction between the SNR shock and the adjacent CO clouds rather than from a PWN.

79 ASTRONOMY AND ASTROPHYSICS↗

Test Beam Results of a Heavily Irradiated Current Injected Detector (CID)

A heavily irradiated (3 x 10{sup 15} 1 MeV n{sub eq}/cm{sup 2}) Current Injected Detector (CID) was tested with 225 GeV muon beam at CERN H2 beam line. In the CID concept the current is limited by the space charge. The injected carriers will be trapped by the deep levels and this induces a stable electric field through the entire bulk regardless of the irradiation fluence the detector has been exposed to. The steady-state density of the trapped charge is defined by the balance between the trapping and the emission rates of charge carriers (detrapping). Thus, the amount of charge injection needed for the electric field stabilization depends on the temperature. AC-coupled 16 cm{sup 2} detector was processed on high resistivity n-type magnetic Czochralski silicon, and it had 768 strips, 50 {mu}m pitch, 10 {mu}m strip width and 3.9 cm strip length. The beam test was carried out using a silicon beam telescope that is based on the CMS detector readout prototype components, APV25 readout chips, and eight strip sensors made by Hamamatsu having 60 {mu}m pitch and intermediate strips. The tested CID detector was bonded to the APV25 readout, and it was operated at temperatures ranging from -40 to -53 C. The CID detector irradiated at 3 x 10{sup 15} 1 MeV n{sub eq}/cm{sup 2} fluence shows about 40% relative Charge Collection Efficiency with respect to the non-irradiated reference plane sensors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

3D Simulations of Irradiated One-Sided Dual-Column 3D Silicon Detector

We undertook, at Brookhaven National Laboratory (BNL), full 3D simulations of one-sided dual-type column 3D Si detectors (p-type substrate) after irradiation levels up to 1 x 10{sup 16} n{sub eq}/cm{sup 2}. Etching does not extend all the way through the substrate, so that all electrodes are on the front side; the backside was neither supported nor processed, covered only with a layer of silicon dioxide. Hence, BNL's one-sided dual-type column 3D detectors are true one-sided detectors. Our simulations of the electric fields at various fluences will add to our knowledge about the practicable applicability of these detectors in the high-radiation environment of future colliders. Simulations show that the full depletion voltage, V{sub fd}, for a dual-column 3D detector is about 1.4 times higher than that of a 2D (planar) pad detector with a thickness d, the same as the column spacing, L{sub p}, in the 3D detector. Moreover, the highest E-field is near the n{sup +} column, while the high E-field mainly is distributed between the n{sup +} and p{sup +} columns. The low E-field is between the two p{sup +} columns, with its lowest point in the center of the unit cell with two p{sup +} columns and two n{sup +} columns. To fully deplete a dual-column 3D detector at 1 x 10{sup 16} n{sub eq}/cm{sup 2} with a reasonable bias ({le} 200 V) necessitates reducing the column spacing, L{sub p}, to 30 {mu}m. The volume under the columns (10% of the total volume) can be depleted with a modest bias ({le}200 V); this underlying volume is not a dead volume. In addition, this depletion volume can support detection sensitivity directly under the columns, thereby lowering the effective dead volume in a 3D Si detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Crystal Structure of the Mycoplasma arthritidis-Derived Mitogen in Apo Form Reveals a 3D Domain-Swapped Dimer

Mycoplasma arthritidis-derived mitogen (MAM) is a superantigen that can activate large fractions of T cells bearing particular V{beta} elements of T cell receptor. Here, we report the crystal structure of a MAM mutant K201A in apo form (unliganded) at 2.8-{angstrom} resolutions. We also partially refined the crystal structures of the MAM wild type and another MAM mutant L50A in apo forms at low resolutions. Unexpectedly, the structures of these apo MAM molecules display a three-dimensional domain-swapped dimer. The entire C-terminal domains of these MAM molecules are involved in the domain swapping. Functional analyses demonstrated that the K201A and L50A mutants do not show altered ability to bind to their host receptors and that they stimulate the activation of T cells as efficiently as does the wild type. Structural comparisons indicated that the 'reconstituted' MAM monomer from the domain-swapped dimer displays large differences at the hinge regions from the MAM{sub wt} molecule in the receptor-bound form. Further comparison indicated that MAM has a flexible N-terminal loop, implying that conformational changes could occur upon receptor binding.

59 BASIC BIOLOGICAL SCIENCES↗

Spatial Distribution of -Crystals in Metallocene-Made Isotactic Polypropylene Crystallized under Combined Thermal and Flow Fields

The present Article reports the relationships between molecular orientation, formation, and spatial distribution of {gamma}-crystals in metallocene-made isotactic polypropylene (m-iPP) samples prepared by two industrial processes: conventional injection molding (CIM) and oscillatory shear injection molding (OSIM), in which combined thermal and flow fields typically exist. In particular, spatial distributions of crystallinity, fraction of {gamma}-crystal (f{gamma}) with respect to {alpha}-crystal, and lamella-branched shish-kebab structure in the shaped samples were characterized by synchrotron two-dimensional (2D) wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. The results showed that the crystallinity in any given region of OSIM samples was always higher than that of CIM samples. The value of f{gamma} increased monotonously from skin to core in CIM samples, whereas the corresponding f{gamma} increased nonmonotonically in OSIM samples. The spatial distribution of {gamma}-crystal in OSIM samples can be explained by the epitaxial arrangement between {gamma}- and {alpha}-crystal in a lamella-branched shish-kebab structure. In the proposed model, the parent lamellae of {alpha}-crystal provide secondary nucleation sites for daughter lamellae of {alpha}-crystal and {gamma}-crystal, and the different content of parent lamellae results in varying amounts of {gamma}-crystal. In OSIM samples, the smallest parent-daughter ratio ([R] = 1.38) in the core region led to the lowest fraction of {gamma}-crystal (0.57), but relatively higher {gamma}-crystal content (0.69) at 600 and 1200 {micro}m depth of the samples (corresponding to [R] of 4.5 and 5.8, respectively). This is consistent with the proposed model where more parent lamellae provide more nucleation sites for crystallization, thus resulting in higher content of {gamma}-crystal. The melting behavior of CIM and OSIM samples was studied by differential scanning calorimetery (DSC). The observed double-melting peaks could be explained by the melting of {gamma}- and {alpha}-crystal of the shaped samples. The f{gamma} distribution calculated from the relative areas of the peaks in the DSC scans was also consistent with the WAXD results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isothermal Crystallization of Poly(L-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative Study

Low-dimensional nanoparticles have a strong ability to induce the crystallization of polymer matrices. One-dimensional carbon nanotubes (CNTs) and two-dimensional graphene nanosheets (GNSs), both of which are both carbon-based nanoparticles, provide a good opportunity to investigate the effects of differently dimensional nanoparticles on the crystallization behavior of a polymer. For this purpose, respective nanocomposites of CNTs and GNSs with poly(L-lactide) (PLLA) as matrix were prepared by solution coagulation. Time-resolved Fourier-transform infrared spectroscopy (FTIR) and synchrotron wide-angle X-ray diffraction (WAXD) were performed to probe chain conformational changes and to determine the crystallization kinetics during the isothermal crystallization of the PLLA nanocomposites and neat PLLA, especially in the early stages. Both CNTs and GNSs could serve as nucleating agents in accelerating the crystallization kinetics of PLLA; however, the ability of CNTs to induce crystallization was stronger than that of GNSs. On increasing the content of CNTs from 0.05 to 0.1 wt %, the induction period was shortened and the crystallization rate was enhanced, but the reverse situation was found for GNSs nanocomposites. In the case of neat PLLA, -CH{sub 3} interchain interactions preceded -(COC + CH{sub 3}) interchain interactions during the crystallization. Conversely, in the CNTs and GNSs nanocomposites, the conformational ordering began with -(COC + CH{sub 3}) interchain interactions, which resulted directly in a reduced induction period. Interchain interactions of this type could be explained in terms of surface-induced conformational order (SICO). Finally, the effect of the dimensionality of the nanoparticles on the crystallization behavior of PLLA is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Competitive Growth of - -Crystals in -Nucleated Isotactic Polypropylene under Shear Flow

It has been well established that, although both shear flow and {beta}-nucleating agent could separately induce {beta}-crystals in isotactic polypropylene (iPP) in an efficient manner, their combination in fact depressed the content of {beta}-crystals when compared with quiescently crystallized {beta}-nucleated iPP. In the current study, in-situ synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) measurements were performed to investigate this behavior. The WAXD data obtained were quantitatively analyzed to determine the independent contributions of applied shear flow and added {beta}-nucleating agent in terms of nucleation stage and subsequent {alpha}- and {beta}-crystal growth stage. In the nucleation stage, the addition of {beta}-nucleating agent increased the amount of {beta}-nuclei, while the application of shear flow and the interactions between shear and {beta}-nucleating agent enhanced the amount of {alpha}-nuclei (the amounts of {alpha}- and {beta}-nuclei were in the same order of magnitude). As a result, in the initial crystallization, {alpha}- and {beta}-crystals grew competitively, causing simultaneously increments of {alpha}- and {beta}-crystals. However, in the growth stage, the growth rate of {beta}-crystals was faster than that of {alpha}-crystals where the epitaxial growth of {beta}-crystals on {alpha}-crystals also occurred (due to more favorable isothermal crystallization temperature for {beta}-crystal growth). Consequently, the content of {beta}-crystals became dominant in the limited growth space; however, it was still less than that formed from the quiescent isothermal crystallization of {beta}-nucleated iPP. As the shear rate increased, more shear-induced {alpha}-nuclei were formed, further decreasing the amount of {beta}-crystals. Nevertheless, when shear and {beta}-nucleating agent coexisted, {beta}-crystals emerged earlier than {alpha}-crystals. The SAXS results indicated that the combination of shear and {beta}-nucleating agent changed the stacking manner of molecular chains, so that the long period of sheared, {beta}-nucleated iPP was comparable to that of quiescently crystallized iPP.

36 MATERIALS SCIENCE↗

Formation of Nickel Silicide from Direct-liquid-injection Chemical-vapor-deposited Nickel Nitride Films

Smooth, continuous, and highly conformal nickel nitride (NiN{sub x}) films were deposited by direct liquid injection (DLI)-chemical vapor deposition (CVD) using a solution of bis(N,N{prime}-di-tert-butylacetamidinato)nickel(II) in tetrahydronaphthalene as the nickel (Ni) source and ammonia (NH{sub 3}) as the coreactant gas. The DLI-CVD NiNx films grown on HF-last (100) silicon and on highly doped polysilicon substrates served as the intermediate for subsequent conversion into nickel silicide (NiSi), which is a key material for source, drain, and gate contacts in microelectronic devices. Rapid thermal annealing in the forming gas of DLI-CVD NiNx films formed continuous NiSi films at temperatures above 400 C. The resistivity of the NiSi films was 15{mu}{Omega} cm, close to the value for bulk crystals. The NiSi films have remarkably smooth and sharp interfaces with underlying Si substrates, thereby producing contacts for transistors with a higher drive current and a lower junction leakage. Resistivity and synchrotron X-ray diffraction in real-time during annealing of NiNx films showed the formation of a NiSi film at about 440 C, which is morphologically stable up to about 650 C. These NiSi films could find applications in future nanoscale complementary metal oxide semiconductor devices or three-dimensional metal-oxide-semiconductor devices such as Fin-type field effect transistors for the 22 nm technology node and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and diffusion of carbon dioxide on metal-organic framework (MOF-5)

Adsorption equilibrium and diffusion of CO{sub 2} on microporous metal-organic frameworks (MOF-5, or IRMOF-1) crystals were experimentally studied by the gravimetric method in the pressure range up to 1 atm. The MOF-5 crystal cubes of about 40-60 {mu} m in sizes were synthesized by the solvothermal method. Freundlich adsorption isotherm equation can fit well CO{sub 2} adsorption isotherms on MOF-5, with isosteric heat of adsorption of about 34 kJ/mol. Diffusion coefficient of CO{sub 2} in the MOF-5 is in the range of 8.1-11.5 x 10{sup -9} cm{sup 2}/s in 295-331K with activation energy of 7.61 kJ/mol. MOF-5 offers attractive adsorption properties as an adsorbent for separation of CO{sub 2} from flue gas.

01 COAL, LIGNITE, AND PEAT↗

Modeling, Simulation and Data Fitting of the Charge Injected Diodes (CID) for SLHC Tracking Applications

Modeling and simulations have been performed for the charge injected diodes (CID) for the application in SLHC. MIP-induced current and charges have been calculated for segmented detectors with various radiation fluences, up to the highest SLHC fluence of 1 x 10{sup 16} n{sub eq}/cm{sup 2}. Although the main advantage of CID detectors is their virtual full depletion at any radiation fluence at a modest bias voltage (<600 V), the simulation of CID and fitting to the existing data have shown that the CID operation mode also reduces the free carrier trapping, resulting in a much higher charge collection at the SLHC fluence than that in a standard Si detector. The reduction in free carrier trapping by almost one order of magnitude is due to the fact that the CID mode also pre-fills the traps, making them neutral and not active in trapping. It has been found that, electron traps can be pre-filled by injection of electrons from the n{sup +} contact, and hole traps can be pre-filled by injection of holes from the p{sup +} contact. The CID mode of detector operation can be achieved by a modestly low temperature of around -40 C, achievable by the proposed CO{sub 2} cooling for detector upgrades in SLHC. High charge collection comparable to the 3D electrode Si detectors makes the CID Si detector a valuable alternative for SLHC detectors for its much easier fabrication process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗