Search NASA⌕ Search

Engineering topics

Liang, X

Publications and source records attributed to Liang, X.

32 records · Page 2

SU-E-T-398: Feasibility of Automated Tools for Robustness Evaluation of Advanced Photon and Proton Techniques in Oropharyngeal Cancer

Purpose: Advanced radiotherapy (RT) techniques such as proton pencil beam scanning (PBS) and photon-based volumetric modulated arc therapy (VMAT) have dosimetric advantages in the treatment of head and neck malignancies. However, anatomic or alignment changes during treatment may limit robustness of PBS and VMAT plans. We assess the feasibility of automated deformable registration tools for robustness evaluation in adaptive PBS and VMAT RT of oropharyngeal cancer (OPC). Methods: We treated 10 patients with bilateral OPC with advanced RT techniques and obtained verification CT scans with physician-reviewed target and OAR contours. We generated 3 advanced RT plans for each patient: proton PBS plan using 2 posterior oblique fields (2F), proton PBS plan using an additional third low-anterior field (3F), and a photon VMAT plan using 2 arcs (Arc). For each of the planning techniques, we forward calculated initial (Ini) plans on the verification scans to create verification (V) plans. We extracted DVH indicators based on physician-generated contours for 2 target and 14 OAR structures to investigate the feasibility of two automated tools (contour propagation (CP) and dose deformation (DD)) as surrogates for routine clinical plan robustness evaluation. For each verification scan, we compared DVH indicators of V, CP and DD plans in a head-to-head fashion using Student's t-test. Results: We performed 39 verification scans; each patient underwent 3 to 6 verification scan. We found no differences in doses to target or OAR structures between V and CP, V and DD, and CP and DD plans across all patients (p > 0.05). Conclusions: Automated robustness evaluation tools, CP and DD, accurately predicted dose distributions of verification (V) plans using physician-generated contours. These tools may be further developed as a potential robustness screening tool in the workflow for adaptive treatment of OPC using advanced RT techniques, reducing the need for physician-generated contours.

60 APPLIED LIFE SCIENCES↗

SU-E-T-430: Modeling MLC Leaf End in 2D for Sliding Window IMRT and Arc Therapy

Purpose: To develop a 2D geometric model for MLC accounting for leaf end dose leakage for dynamic IMRT and Rapidarc therapy. Methods: Leaf-end dose leakage is one of the problems for MLC dose calculation and modeling. Dosimetric leaf gap used to model the MLC and to count for leakage in dose calculation, but may not be accurate for smaller leaf gaps. We propose another geometric modeling method to compensate for the MLC round-shape leaf ends dose leakage, and improve the accuracy of dose calculation and dose verification. A triangular function is used to geometrically model the MLC leaf end leakage in the leaf motion direction, and a step function is used in the perpendicular direction. Dose measurements with different leaf gap, different window width, and different window height were conducted, and the results were used to fit the analytical model to get the model parameters. Results: Analytical models have been obtained for stop-and-shoot and dynamic modes for MLC motion. Parameters a=0.4, lw'=5.0 mm for 6X and a=0.54, lw'=4.1 mm for 15x were obtained from the fitting process. The proposed MLC leaf end model improves the dose profile at the two ends of the sliding window opening. This improvement is especially significant for smaller sliding window openings, which are commonly used for highly modulated IMRT plans and arc therapy plans. Conclusion: This work models the MLC round leaf end shape and movement pattern for IMRT dose calculation. The theory, as well as the results in this work provides a useful tool for photon beam IMRT dose calculation and verification.

60 APPLIED LIFE SCIENCES↗

Simulations of multipacting in the cathode stalk and FPC of 112 MHz superconducting electron gun

A 112 MHz superconducting quarter-wave resonator electron gun will be used as the injector of the Coherent Electron Cooling (CEC) proof-of-principle experiment at BNL. Furthermore, this electron gun can be used for testing of the performance of various high quantum efficiency photocathodes. In a previous paper, we presented the design of the cathode stalks and a Fundamental Power Coupler (FPC). In this paper we present updated designs of the cathode stalk and FPC. Multipacting in the cathode stalk and FPC was simulated using three different codes. All simulation results show no serious multipacting in the cathode stalk and FPC.

43 PARTICLE ACCELERATORS↗

High Efficiency Visible Photocathode Development

The alkali antimonides are of significant interest to the accelerator community, as they have a high quantum efficiency (QE) under illumination by green light. These cathodes are attractive for high-average-current photoinjector applications and understanding their fundamental properties are critical to the production of long lived, reliable cathodes. We report on ongoing work to characterize cathode formation during growth. In-situ X-ray Diffraction (XRD) has been used to compare grain size and texture in antimony layers, and X-ray Photoelectron Spectroscopy (XPS) has been used to investigate the solid-state chemistry of cathode formation.

36 MATERIALS SCIENCE↗

Design of the fundamental power coupler and photocathode inserts for the 112MHz superconducting electron gun

A 112 MHz superconducting quarter-wave resonator electron gun will be used as the injector of the Coherent Electron Cooling (CEC) proof-of-principle experiment at BNL. Furthermore, this electron gun can be the testing cavity for various photocathodes. In this paper, we present the design of the cathode stalks and a Fundamental Power Coupler (FPC) designated to the future experiments. Two types of cathode stalks are discussed. Special shape of the stalk is applied in order to minimize the RF power loss. The location of cathode plane is also optimized to enable the extraction of low emittance beam. The coaxial waveguide structure FPC has the properties of tunable coupling factor and small interference to the electron beam output. The optimization of the coupling factor and the location of the FPC are discussed in detail. Based on the transmission line theory, we designed a half wavelength cathode stalk which significantly brings down the voltage drop between the cavity and the stalk from more than 5.6 kV to 0.1 kV. The transverse field distribution on cathode has been optimized by carefully choosing the position of cathode stalk inside the cavity. Moreover, in order to decrease the RF power loss, a variable diameter design of cathode stalk has been applied. Compared to the uniform shape of stalk, this design gives us much smaller power losses in important locations. Besides that, we also proposed a fundamental power coupler based on the designed beam parameters for the future proof-of-principle CEC experiment. This FPC should give a strong enough coupling which has the Q external range from 1.5e7 to 2.6e8.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Collectivity in {sup 41}S

Yrast states in the neutron-rich {sup 41}S nucleus have been studied using binary grazing reactions produced by the interaction of a 215-MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. The magnetic spectrometer, PRISMA, and the {gamma}-ray array, CLARA, were used in the measurements. {gamma}-ray transitions of energy 449 and 638 keV were observed. Results from published intermediate-energy Coulomb excitation measurements in combination with those from the present work have led to the construction of a new {sup 41}S level scheme. Proposed J{sup {pi}} values are based on experimental observation and on model-dependent arguments. The level scheme and published electromagnetic transition probabilities are discussed within the context of state-of-art shell-model calculations using the SDPF-U effective interaction. In contrast with the excellent agreement observed in earlier published work, here there are significant discrepancies between experiment and the results of shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intruder negative-parity states of neutron-rich {sup 33}Si

Yrast states in the neutron-rich {sub 14}{sup 33}Si{sub 19} nucleus have been studied using binary grazing reactions produced by the interaction of a 215-MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. An experimental setup that combines the large-acceptance magnetic spectrometer PRISMA and the high-efficiency gamma-ray detection array CLARA was used in the experiment. Four new gamma-ray photopeaks at energies of 971, 1724, 1772, and 2655 keV were observed and assigned to the {sup 33}Si level scheme. The experimental level scheme is compared with the results of 1(Planck constant/2pi)omega p-sd-pf large-scale shell-model calculations using the recently developed PSDPFB effective interaction; good agreement is obtained. The structure of the populated states of {sup 33}Si is discussed within the context of an odd neutron coupled to states of the {sup 32}Si core.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

gamma-ray spectroscopy of neutron-rich {sup 40}S

Yrast states up to (6{sup +}) in the neutron-rich {sup 40}S nucleus have been studied using binary grazing reactions produced by the interaction of a 215 MeV beam of {sup 36}S ions with a thin {sup 208}Pb target. The novel experimental setup that combines the large acceptance magnetic spectrometer, PRISMA, and the high-efficiency gamma-ray detection array, CLARA, was used. A new gamma-ray transition at an energy of 1572 keV was observed and tentatively assigned to the (6{sup +})->(4{sup +}) transition. A comparison of experimental observations and the results of large-scale 0(Planck constant/2pi)omega sd-pf shell-model calculations indicates that one- and two-proton excitations from the 2s{sub 1/2} to the 1d{sub 3/2} orbitals play an important role in reproducing the {sup 40}S yrast level structure and the published B(E2;0{sub g.s.}{sup +}->2{sub 1}{sup +}) value. The structure of the yrast states of the even-A isotopes of sulfur is interpreted in terms of the configurations of valence protons and neutrons within the context of large-scale 0(Planck constant/2pi)omega sd-pf shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Migration of Nuclear Shell Gaps Studied in the d({sup 24}Ne,p{gamma}){sup 25}Ne Reaction

The transfer of neutrons onto {sup 24}Ne has been measured using a reaccelerated radioactive beam of {sup 24}Ne to study the (d,p) reaction in inverse kinematics. The unusual raising of the first 3/2{sup +} level in {sup 25}Ne and its significance in terms of the migration of the neutron magic number from N=20 to N=16 is put on a firm footing by confirmation of this state's identity. The raised 3/2{sup +} level is observed simultaneously with the intruder negative parity 7/2{sup -} and 3/2{sup -} levels, providing evidence for the reduction in the N=20 gap. The coincident gamma-ray decays allowed the assignment of spins as well as the transferred orbital angular momentum. The excitation energy of the 3/2{sup +} state shows that the established USD shell model breaks down well within the sd model space and requires a revised treatment of the proton-neutron monopole interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

{gamma}-ray spectroscopy of {sub 17}{sup 38}Cl using grazing reactions

Excited states of {sub 17}{sup 38}Cl{sub 21} were populated in binary grazing reactions during the interaction of a beam of {sub 16}{sup 36}S{sub 20} ions of energy 215 MeV with a {sub 82}{sup 208}Pb{sub 126} target. The combination of the PRISMA magnetic spectrometer and the CLARA {gamma}-ray detector array was used to identify the reaction fragments and to detect their decay via {gamma}-ray emission. A level scheme for {sup 38}Cl is presented and discussed within the context of the systematics of neighboring nuclei and is compared with the results of state-of-the-art shell-model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Microstructural characterization of transformable Fe-Mn alloys at different length scales

The as-annealed and deformed Microstructure of transformable Fe-Mn alloys were, comprehensively, characterized over a wide range of length scales. Differential interference contrast optical metallography, combined with a tinting etching method, was employed to examine the grain morphology. A new specimen preparation method, involving electro-polishing and electro-etching, was developed for scanning electron microscopy and electron back-scattered diffraction analysis. This method leads to a very good imaging contrast and thus bridges the length scale gap between optical metallography and transmission electron microscopy. Moreover, it enables simultaneous scanning electron microscopy and electron backscatter diffraction analysis which allows correlations among morphology, crystal orientation and phase analysis in the length scale of microns. Transmission electron microscopy investigations were also made to evaluate the thermal and mechanical transformation products as well as defect structures.

36 MATERIALS SCIENCE↗