Search NASA⌕ Search

Engineering topics

Liao, Wenjie

Publications and source records attributed to Liao, Wenjie.

Using ethanol and isopropanol as biomass model compounds for understanding bond scission mechanisms over Cu/Mo 2 N catalysts

The conversion of biomass compounds into fuels and chemicals is an important step towards a more sustainable future. This work combines results from model surfaces and powder catalysts to demonstrate Cu-modified mo- lybdenum nitride (Cu/Mo 2 N) as a selective catalyst for dehydrogenation of the biomass model compounds, ethanol and isopropanol. Results from model surfaces showed that while Mo2N led to unselective decomposition via both dehydrogenation and dehydration, the addition of Cu increased the dehydrogenation activity and selectivity. DFT calculations showed how Cu influenced the structures of active sites, adsorbate interactions, and thus the product selectivity. Batch reactor studies on corresponding powder catalysts confirmed the trend that Cu modification increased dehydrogenation activity, and in situ X-ray absorption spectroscopy elucidated the Cu oxidation state under reaction conditions. Further, this work demonstrates a strategy for promoting dehydrogenation over Mo 2 N-based catalysts, as well as the feasibility of using model surfaces to guide the design of industrially relevant catalysts.

09 BIOMASS FUELS↗

Controlling Bond Scission Pathways of Isopropanol on Fe- and Pt-Modified Mo 2 N Model Surfaces and Powder Catalysts

Biomass valorization can be used to produce value-added chemicals and fuels from renewable biomass resources by upgrading them via selective bond scission while retaining certain functional groups. Specifically, upgrading biomass through the dehydrogenation of alcohols to carbonyl compounds has gained interest as a method of utilizing biomass-derived alcohols while additionally producing H 2 . In this work, isopropanol was used as a probe molecule to control bond scission selectivity over Fe- and Pt-modified molybdenum nitride (Mo 2 N) model surfaces and powder catalysts. Trends in the selectivity toward dehydration and dehydrogenation were dependent on both the type and coverage of the metal overlayer on model surfaces. These results were then extended to the corresponding powder catalysts to demonstrate how model surface studies can inform the design of supported catalysts. Density functional theory calculations provided insights into controlling the dehydration and dehydrogenation pathways. In conclusion, this work shows that a fundamental understanding of the reactivity and intermediates on Mo 2 N-based model surfaces can be applied to understand the catalytic performance of metal-modified Mo 2 N powder catalysts, and also demonstrates that Mo 2 N-based catalysts are potentially promising materials for upgrading biomass-derived oxygenates.

09 BIOMASS FUELS↗

Morphology Dependent Reactivity of CsO $x$ Nanostructures on Au(111): Binding and Hydrogenation of CO 2 to HCOOH

Cesium oxide (CsO $x$ ) nanostructures grown on Au(111) behave as active centers for CO 2 binding and hydrogenation reactions. The morphology and reactivity of these CsO $x$ systems were investigated as a function of alkali coverage using scanning tunnelling microscopy (STM), ambient pressure X-ray photoelectron spectroscopy (AP-XPS), and density functional theory (DFT) calculations. STM results show that initially (0.05 - 0.10 ML) cesium oxide clusters (Cs 2 O 2 ) grow at the elbow sites of the herringbone of Au(111), subsequently transforming into two-dimensional islands with increasing cesium coverage (> 0.15 ML). XPS measurements reveal the presence of suboxidic (Cs $y$ O; $y$ ≥ 2) species for the island structures. The higher coverages of cesium oxide nanostructures contain a lower O/Cs ratio resulting in a stronger binding of CO 2 . Moreover, the O atoms in the Cs $y$ O structure undergo a rearrangement upon the adsorption of CO 2 which is a reversible phenomenon. Under CO 2 hydrogenation conditions, the small Cs 2 O 2 clusters are hydroxylated, thereby preventing the adsorption of CO 2 . However, the hydroxylation of the higher coverages of Cs $y$ O did not prevent CO 2 adsorption, and the adsorbed CO 2 transformed to HCOO species that eventually yield HCOOH. DFT calculations further confirm that the dissociated H 2 attacks the C in the adsorbate to produce formate, which is both thermodynamically and kinetically favored during the CO 2 reaction with hydroxylated Cs $y$ O. These results demonstrate that cesium oxide by itself is an excellent catalyst for CO 2 hydrogenation that could produce formate, an important intermediate for the generation of value-added species. The role of the alkali oxide nanostructures as active centers, not merely as promoters, may have broad implications wherein the alkali oxides can be considered in the design of materials tuned for specific applications in heterogeneous catalysis.

03 NATURAL GAS↗

Correlating Experimentally Determined Hydrogen Binding Energy with Hydrogen Evolution Activity over Metal Monolayers on Molybdenum Nitride

It is well established that hydrogen binding energy (HBE) is a key descriptor for hydrogen evolution reaction (HER) activity, and such a relationship is a useful tool for searching efficient and cost-effective HER catalysts. However, in almost all cases, the HBE values are obtained from density functional theory (DFT) calculations. Here in this study, temperature programmed desorption (TPD) was used to experimentally determine the HBE values of metal monolayers supported on molybdenum nitride (Mo 2 N), and electrochemical measurements were performed on the same surfaces. Combined DFT and kinetic Monte Carlo (kMC) simulations were used to validate the trend observed with TPD and the electrochemical HER activity. Depositing one monolayer of Pt on Mo 2 N led to similar HBE values seen for bulk Pt, and electrochemical measurements showed that monolayer Pt on Mo 2 N had similar HER activity to that of bulk Pt. Similar studies were also performed for monolayer Pd on Mo 2 N to confirm the correlation. This work also demonstrates that Mo 2 N is a promising support to reduce precious metal loading in HER catalysts.

08 HYDROGEN↗