Search NASA⌕ Search

Engineering topics

Libera, Joseph A.

Publications and source records attributed to Libera, Joseph A..

At least 19 records

Tunable Solid Acid Catalyst Thin Films Prepared by Atomic Layer Deposition

Solid acid catalysts, including zeolites and amorphous silica-aluminas (ASAs), are industrially important materials widely used in the fuel and petrochemical industries. The versatility of zeolites is due to the Brønsted acidity of the bridging hydroxyl and shape selectivity that can be tailored during and after synthesis. This is in contrast to amorphous silica-alumina, where tailoring acidity is a major challenge as the Brønsted acid structure in ASA is still debated. In both cases, however, the pore size and acidity cannot be tuned independently, and this is particularly limiting in the application of biomass conversion, where zeolite pores are too small for the molecules of interest. Herein, we present a method using atomic layer deposition (ALD) to prepare thin films of solid acid materials where the ratio of Brønsted to Lewis acid sites can be tuned precisely. This capability, combined with the sub-nm pore size control afforded by ALD yields a powerful and flexible method for synthesizing solid acid catalysts inside virtually any mesoporous host. We demonstrate the utility of these materials in two acid-catalyzed reactions relevant to biomass conversion: (1) Meerwein–Ponndorf–Verley–Oppenauer (MPVO) reaction and dehydration of fructose and (2) cascade reaction of glucose to 5-hydroxymethylfurfural. Finally, we propose a plausible structure for the Brønsted acid sites in our materials based on infrared spectroscopy and solid-state nuclear magnetic resonance measurements and density functional theory calculations and argue that this same structure might apply to conventional ASAs as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refractory solar selective coatings

Selective receiver coatings provide high performance for concentrated solar power applications. The solar selective coating provides high solar absorptivity (90% or greater) with low IR emissivity (0.1 or less) while maintaining stability at temperatures greater than 700° C. The coating comprises a composite of a mesoporous photonic matrix with a conformal optical coating. One example composite coating includes a mesoporous photonic coating comprising a plurality of particles having sizes between 100 nm and 2000 nm, and a conformal optical coating formed by Atomic Layer Deposition (ALD) that infiltrates the mesoporous structure of the photonic coating and comprises metal nanoparticles and an amorphous dielectric matrix.

14 SOLAR ENERGY↗

Reactor scale simulations of ALD and ALE: Ideal and non-ideal self-limited processes in a cylindrical and a 300 mm wafer cross-flow reactor

Here, we have developed a simulation tool to model self-limited processes such as atomic layer deposition (ALD) and atomic layer etching inside reactors of arbitrary geometry as well the output of in situ quartz crystal microbalance and mass spectrometry. We have applied this model to two standard types of cross-flow reactors: a cylindrical tube reactor and a model 300 mm wafer reactor, and explored both ideal and nonideal self-limited kinetics. The model results are in agreement with experimental results and analytic expressions obtained using a simple plug-flow model for the cylindrical tube reactor. We also extended the simulations to consider two nonideal self-limited processes: soft-saturating processes characterized by a slow reaction pathway and processes where surface by-products can compete with the precursor for the same pool of adsorption sites. Our results show that it is possible to have a self-limited process with saturated yet inhomogeneous growth profiles due to the competition of reactor by-products. This is in agreement with experimental observations for titanium dioxide ALD from titanium tetraisopropoxide and titanium tetrachloride precursors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Flame stability analysis of flame spray pyrolysis by artificial intelligence

Flame spray pyrolysis (FSP) is a process used to synthesize nanoparticles through the combustion of an atomized precursor solution; this process has applications in catalysts, battery materials, and pigments. Current limitations revolve around understanding how to consistently achieve a stable flame and the reliable production of nanoparticles. Machine learning and artificial intelligence algorithms that detect unstable flame conditions in real time may be a means of streamlining the synthesis process and improving FSP efficiency. In this study, the FSP flame stability is first quantified by analyzing the brightness of the flame's anchor point. This analysis is then used to label data for both unsupervised and supervised machine learning approaches. The unsupervised learning approach allows for autonomous labeling and classification of new data by representing data in a reduced dimensional space and identifying combinations of features that most effectively cluster it. The supervised learning approach, on the other hand, requires human labeling of training and test data but is able to classify multiple objects of interest (such as the burner and pilot flames) within the video feed. The accuracy of each of these techniques is compared against the evaluations of human experts. Both the unsupervised and supervised approaches can track and classify FSP flame conditions in real time to alert users of unstable flame conditions. This research has the potential to autonomously track and manage flame spray pyrolysis as well as other flame technologies by monitoring and classifying the flame stability.

42 ENGINEERING↗

Polycaprolactone: A Promising Addition to the Sequential Infiltration Synthesis Polymer Family Identified through In Situ Infrared Spectroscopy

Infiltration of inorganic oxides inside polymers using sequential infiltration synthesis (SIS) is an effective method for creating materials for a broad range of applications. The reactions between various polymer functional groups and organometallic/inorganic precursors are unique, which makes it essential to understand the specific interactions for a range of precursors and polymers to enable predictive process design and to extend the utility of SIS to applications. In this paper, in situ Fourier transform infrared spectroscopy (FTIR) measurements have been performed during Al 2 O 3 and TiO 2 SIS in three different homopolymers: poly(methyl methacrylate) (PMMA), poly(epsilon-caprolactone) (PCL), and poly(2-vinylpyridine) (P2VP). From the FTIR intensity changes after precursor exposure and during the subsequent purge times, it is demonstrated quantitatively that the interaction dynamics and the stability of the intermediate complexes of these polymers with the metal precursors are substantially different. A key finding from this comparative study is that PCL interacts far more strongly with metal precursors, even though its carbonyl (C=O) and ester (C-O-R) functional groups are similar to those of the more weakly interacting PMMA. This behavior suggests that additional factors beyond the identity of the functional groups dictate how polymers interact with metal compounds in SIS. PCL, which has not previously been reported in SIS processes, may be an attractive polymeric template for implementing SIS with improved uniformity and cost-effectiveness.

36 MATERIALS SCIENCE↗

High-capacity rotary drum for atomic layer deposition onto powders and small mechanical parts in a hot-walled viscous flow reactor

Atomic layer deposition (ALD) is uniquely capable of providing uniform thin-film coatings on powder substrates, but powder processing has historically required an ALD reactor designed specifically for powders-e.g., a fluidized bed. Tubular hot-walled viscous-flow reactors commonly employed in laboratory-scale ALD research for coating planar substrates such as silicon have been employed previously to coat gram quantities of powder spread out in a thin layer on a tray, but larger quantities of powder introduce long diffusion pathways where reactants are unable to percolate to the bottom of the powder bed to provide uniform coating in reasonable time periods. In this work, we report a rotary drum with a capacity of 100s of grams that is compatible with conventional tubular hot-walled ALD reactors and provides uniform coatings on powders in viscous flow operation. We benchmark this system using Al 2 O 3 ALD with trimethylaluminum and water. We examine the effect of rotation speed and powder quantity on saturation time via in situ quadrupole mass spectroscopy measurements and gravimetric analysis. Finally, the rotary drum we report is able to provide homogenous coating of up to 75g of silica gel powder with a total surface area of similar to 1500m 2 in viscous flow operation with precursor utilization as high as 70%.

47 OTHER INSTRUMENTATION↗

Hydrophilic, light active coating for membranes

A porous membrane provides enhanced filtration of pollutants and particles by coating the membrane with conformal thin films of doped titanium dioxide via atomic layer deposition or, alternatively, sequential infiltration synthesis. The membrane can either be organic or inorganic, and the doping of the membrane, usually with nitrogen, is an important feature that shifts the optical absorption of the TiO2 from the UV range into the visible-light range. This enables the use of lower energy light, including sunlight, to activate the photocatalytic function of the film. The coating described in the present invention is compatible with virtually any porous membrane and allows for precise tuning of the pore size with molecular precision. The present invention presents a new coating process and chemical structure that provides catalytic activity, strongly enhanced by light, to both mitigate fouling and break down various organic pollutants in the process stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Manufacturing Data and Machine Learning Platform: Enabling Real-time Monitoring and Control of Scientific Experiments via IoT

IoT devices and sensor networks present new opportunities for measuring, monitoring, and guiding scientific experiments. Sensors, cameras, and instruments can be combined to provide previously unachievable insights into the state of ongoing experiments. However, IoT devices can vary greatly in the type, volume, and velocity of data they generate, making it challenging to fully realize this potential. Indeed, synergizing diverse IoT data streams in near-real time can require the use of machine learning (ML). In addition, new tools and technologies are required to facilitate the collection, aggregation, and manipulation of sensor data in order to simplify the application of ML models and in turn, fully realize the utility of IoT devices in laboratories. Here we will demonstrate how the use of the Argonne-developed Manufacturing Data and Machine Learning (MDML) platform can analyze and use IoT devices in a manufacturing experiment. MDML is designed to standardize the research and operational environment for advanced data analytics and AI-enabled automated process optimization by providing the infrastructure to integrate AI in cyber-physical systems for in situ analysis. We will show that MDML is capable of processing diverse IoT data streams, using multiple computing resources, and integrating ML models to guide an experiment.

Machine Learning↗

Method for depositing transparent conducting oxides

A method of preparing light transmitting conducting metal oxide (TCO) films using atomic layer deposition (ALD) of a metal precursor multiple oxidizing reactants. The multiple metal oxidizing reactants may be selected to enhance growth of the TCO film. In a particular embodiment, an indium oxide TCO film is prepared using a cyclopentadienyl indium precursor and a combination of water and oxygen.

36 MATERIALS SCIENCE↗

Hydrothermal performance of catalyst supports

A high surface area catalyst with a mesoporous support structure and a thin conformal coating over the surface of the support structure. The high surface area catalyst support is adapted for carrying out a reaction in a reaction environment where the thin conformal coating protects the support structure within the reaction environment. In various embodiments, the support structure is a mesoporous silica catalytic support and the thin conformal coating comprises a layer of metal oxide resistant to the reaction environment which may be a hydrothermal environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micro-balance sensor integrated with atomic layer deposition chamber

The invention is directed to QCM measurements in monitoring ALD processes. Previously, significant barriers remain in the ALD processes and accurate execution. To turn this exclusively dedicated in situ technique into a routine characterization method, an integral QCM fixture was developed. This new design is easily implemented on a variety of ALD tools, allows rapid sample exchange, prevents backside deposition, and minimizes both the footprint and flow disturbance. Unlike previous QCM designs, the fast thermal equilibration enables tasks such as temperature-dependent studies and ex situ sample exchange, further highlighting the feasibility of this QCM design for day-to-day use. Finally, the in situ mapping of thin film growth rates across the ALD reactor was demonstrated in a popular commercial tool operating in both continuous and quasi-static ALD modes.

42 ENGINEERING↗

Atomic layer deposition of molybdenum disulfide films using MoF 6 and H 2 S

Molybdenum sulfide films were grown by atomic layer deposition on silicon and fused silica substrates using molybdenum hexafluoride (MoF6) and hydrogen sulfide at 200 degrees C. In situ quartz crystal microbalance (QCM) measurements confirmed linear growth at 0.46 angstrom/cycle and self-limiting chemistry for both precursors. Analysis of the QCM step shapes indicated that MoS2 is the reaction product, and this finding is supported by x-ray photoelectron spectroscopy measurements showing that Mo is predominantly in the Mo(IV) state. However, Raman spectroscopy and x-ray diffraction measurements failed to identify crystalline MoS2 in the as-deposited films, and this might result from unreacted MoFx residues in the films. Annealing the films at 350 degrees C in a hydrogen rich environment yielded crystalline MoS2 and reduced the F concentration in the films. Optical transmission measurements yielded a bandgap of 1.3 eV. Finally, the authors observed that the MoS2 growth per cycle was accelerated when a fraction of the MoF6 pulses were substituted with diethyl zinc. Published by the AVS

Mane, Anil U.↗