Engineering topics

Liebeskind, John G.

Publications and source records attributed to Liebeskind, John G..

4 records

NASA NTRS1993

Plume characteristics of an arcjet thruster

An experimental investigation is conducted of the plume of a 1.5 kW hydrogen-fueled arcjet thruster. The velocity and translational temperature are measured by laser induced fluorescence of excited-state atomic hydrogen at a variety of locations and operating conditions. The peak velocity and temperature at the center of the exit plane of 14.7 km/s and 5000 K lead to a Mach number of 1.9. Evidence is presented which demonstrates the extent to which viscous forces dominate the flow, such as the exit plane Reynolds number of 18. Data taken in the plume suggest a transition from supersonic to subsonic flow via viscous dissipation. In addition, the results suggest that high tank pressures (0.4 to 1.5 Torr) limit the ability to simulate space environments for different portions of the plume.

Liebeskind, John G.↗

NASA NTRS1992

Flow diagnostics of an arcjet using laser-induced fluorescence

A diagnostic has been developed to measure velocity and translational temperature in the plume of an arcjet thruster. Laser induced fluorescence with a narrowband CW laser is used to probe the Balmer alpha transition of excited atomic hydrogen. The velocity is determined from the Doppler shift of the fluorescence excitation spectrum while temperature is inferred from its shape. Analysis shows that while Doppler broadening is the only significant broadening mechanism, the fine structure of the transition must be accounted for. Near the exit plane, axial velocities vary from 4 to 14 km/s; radial velocities vary from 0 to 4 km/s; and swirl velocities are shown to be relatively small. Temperatures from 1000 to 5000 K indicate high dissociation fractions.

Liebeskind, John G.↗

NASA NTRS1992

Laser-induced fluorescence of atomic hydrogen in an arcjet thruster

A diagnostic has been developed to measure gas kinetic temperature and velocity in a 1 kW hydrogen fueled arcjet thruster. The technique is based on laser-induced fluorescence of the Balmer alpha transition (656 nm) in atomic hydrogen. A narrowband CW ring dye laser scans the excitation spectrum, permitting accurate determination of the atomic line shape and position. The velocity is inferred from the Doppler shift of the transition while the temperature is obtained from the shape. Near the exit plane, measured axial velocity varies between 4 and 14 km/s; measured radial velocity varies from 0 to 4 km/s. Temperatures were measured in the range from 1000 K near the edge of the plume to 5000 K at the centerline. Relevant broadening mechanisms are discussed.

Liebeskind, John G.↗

NASA NTRS1991

Velocity measurements in a hydrogen arcjet using LIF

A new diagnostic developed to measure the axial velocity of atomic hydrogen in a 1-kW hydrogen-fueled arcjet thruster is reported. The technique is based on laser-induced fluorescence of the Balmer alpha transition (656 nm) in atomic hydrogen. A narrow-band CW ring dye laser scans the excitation spectrum permitting accurate determination of the absorption line shape and position. The velocity is derived from the Doppler-shifted line position. A spatially resolved velocity profile is presented with a peak velocity of 12.8 km/s at the arcjet centerline near the exit plane.

Liebeskind, John G.↗