Search NASA⌕ Search

Engineering topics

Lignell, David O.

Publications and source records attributed to Lignell, David O..

At least 19 records

SootLib: A soot model library for combustion simulation

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and is available on GitHub. The library includes several models for soot chemistry and coagulation, and it represents the PSD using either a sectional model or the method of moments (MOM). Four closure approaches for the MOM are implemented allowing up to eight moments: monodispersed, an assumed-shape lognormal distribution, the quadrature method of moments, and the method of moments with interpolative closure. SootLib provides an interface for inclusion in other combustion packages including CFD or reacting flow solvers. The range of models allows comparisons and sensitivity studies, and the modularity facilitates extension to other soot models.

97 MATHEMATICS AND COMPUTING↗

Reduction of a detailed soot model for simulations of pyrolysing solid fuels

Here, we introduce a computationally inexpensive soot formation model for use in simulating large solid-complex fuel systems. The proposed model evaluates three variables: number density of tars, bulk mass density of soot particles, and particle number density. Each of these variables are influenced by soot formation phenomena, and this model evaluates the most common of these phenomena: soot nucleation, surface reactions, and coagulation. Two separate simulations were carried out using this model and results were compared against simulations using a more detailed and computationally expensive model. Findings are promising and show a meaningful reduction in model complexity and computational cost while still giving comparable results.

58 GEOSCIENCES↗

Modeling soot formation from solid complex fuels

A detailed model is proposed for predicting soot formation from complex solid fuels. The proposed model resolves two particle size distributions, one for soot precursors and another for soot particles. The precursor size distribution is represented with a sectional approach while the soot particle-size distribution is represented with the method of moments and an interpolative closure method is used to resolve fractional methods. Based on established mechanisms, this model includes submodels for precursor coagulation, growth, and consumption, as well as soot nucleation, surface growth, agglomeration, and consumption. The model is validated with comparisons to experimental data for two systems: coal combustion over a laminar flat-flame burner and biomass gasification. Results are presented for soot yield for three coals at three temperatures each, and for soot yield from three types of biomass at two temperatures each. These results represent a wide range of fuels and varying combustion environments, demonstrating the broad applicability of the model.

97 MATHEMATICS AND COMPUTING↗

Modeling Soot Oxidation and Gasification with Bayesian Statistics

This paper presents a statistical method for model calibration using data collected from literature. The method is used to calibrate parameters for global models of soot consumption in combustion systems. This consumption is broken into two different submodels: first for oxidation where soot particles are attacked by certain oxidizing agents; second for gasification where soot particles are attacked by H 2 O or CO 2 molecules. Rate data were collected from 19 studies in the literature and evaluated using Bayesian statistics to calibrate the model parameters. Bayesian statistics are valued in their ability to quantify uncertainty in modeling. The calibrated consumption model with quantified uncertainty is presented here along with a discussion of associated implications. The oxidation results are found to be consistent with previous studies. Significant variation is found in the CO 2 gasification rates.

01 COAL, LIGNITE, AND PEAT↗

Examination of the effect of differential molecular diffusion in DNS of turbulent non-premixed flames

Here, the effect of differential molecular diffusion (DMD) in turbulent non-premixed flames is studied by examining two previously reported DNS of temporally evolving planar jet flames, one with CO/H 2 as the fuel and the other with C 2 H 4 as the fuel. The effect of DMD in the CO/H 2 DNS flames in which H 2 is part of fuel is found to behave similar to laminar flamelet, while in the C 2 H 4 DNS flames in which H 2 is not present in the fuel it is similar to laminar flamelet in early stages but becomes different from laminar flamelet later. The scaling of the effect of DMD with respect to the Reynolds number Re is investigated in the CO/H 2 DNS flames, and an evident power law scaling (~Re –a with a a positive constant) is observed. The scaling of the effect of DMD with respect to the Damkohler number Da is explored in both laminar counter-flow jet C 2 H 4 diffusion flames and the C 2 H 4 DNS flames. A power law scaling (~ Da a with a a positive constant) is clearly demonstrated for C 2 H 4 nonpremixed flames.

08 HYDROGEN↗

Evaluation of stochastic particle dispersion modeling in turbulent round jets

ODT (one-dimensional turbulence) simulations of particle-carrier gas interactions are performed in the jet flow configuration. Particles with different diameters are injected onto the centerline of a turbulent air jet. The particles are passive and do not impact the fluid phase. Their radial dispersion and axial velocities are obtained as functions of axial position. The time and length scales of the jet are varied through control of the jet exit velocity and nozzle diameter. Dispersion data at long times of flight for the nozzle diameter (7 mm), particle diameters (60 and 90 µm), and Reynolds numbers (10, 000–30, 000) are analyzed to obtain the Lagrangian particle dispersivity. Flow statistics of the ODT particle model are compared to experimental measurements. It is shown that the particle tracking method is capable of yielding Lagrangian prediction of the dispersive transport of particles in a round jet. In this study, three particle-eddy interaction models (Type-I, -C, and -IC) are presented to examine the details of particle dispersion and particle-eddy interaction in jet flow.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A numerical comparison of precipitating turbulent flows between large‐eddy simulation and one‐dimensional turbulence

This study presents the results of computational fluid dynamics simulations of a multiphase, reacting, turbulent mixing layer in an idealized geometry. The purpose is to compare large‐eddy simulation (LES) to one‐dimensional turbulence (ODT) and examine the trends of the flow under differing mixing conditions. Aqueous streams are mixed together to precipitate polymorphs of calcium carbonate. The polymorphs of calcium carbonate are tracked numerically using population balance equations (PBE). Each PBE contains all of the relevant physical models to track the particle evolution including nucleation, growth, and aggregation. A simple subgrid mixing model that is convenient for use with PBEs was implemented in the LES code. The higher spatial resolution achievable with ODT allowed an investigation on the effect of resolution on the mixing‐model error. The Reynolds number of the flow is varied and is shown to cause a decrease in average particle sizes with higher mixing rates. © 2015 American Institute of Chemical Engineers AIChE J , 61: 3185–3197, 2015

Abboud, Alex W.↗

Particle dispersion in homogeneous turbulence using the one-dimensional turbulence model

Lagrangian particle dispersion is studied using the one-dimensional turbulence (ODT) model in homogeneous decaying turbulence configurations. The ODT model has been widely and successfully applied to a number of reacting and nonreacting flow configurations, but only limited application has been made to multiphase flows. Here, we present a version of the particle implementation and interaction with the stochastic and instantaneous ODT eddy events. The model is characterized by comparison to experimental data of particle dispersion for a range of intrinsic particle time scales and body forces. Particle dispersion, velocity, and integral time scale results are presented. The particle implementation introduces a single model parameter β{sub p}, and sensitivity to this parameter and behavior of the model are discussed. Good agreement is found with experimental data and the ODT model is able to capture the particle inertial and trajectory crossing effects. These results serve as a validation case of the multiphase implementations of ODT for extensions to other flow configurations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Statistics of particle time-temperature histories

Particles in non-isothermal turbulent flow are subject to a stochastic environment that produces a distribution of particle time-temperature histories. This distribution is a function of the dispersion of the non-isothermal (continuous) gas phase and the distribution of particles relative to that gas phase. In this work we extend the one-dimensional turbulence (ODT) model to predict the joint dispersion of a dispersed particle phase and a continuous phase. The ODT model predicts the turbulent evolution of continuous scalar fields with a model for the cascade of fluctuations to smaller scales (the ‘triplet map’) at a rate that is a function of the fully resolved one-dimensional velocity field. Stochastic triplet maps also drive Lagrangian particle dispersion with finite Stokes numbers including inertial and eddy trajectory-crossing effects included. Two distinct approaches to this coupling between triplet maps and particle dispersion are developed and implemented along with a hybrid approach. An ‘instantaneous’ particle displacement model matches the tracer particle limit and provides an accurate description of particle dispersion. A ‘continuous’ particle displacement model translates triplet maps into a continuous velocity field to which particles respond. Particles can alter the turbulence, and modifications to the stochastic rate expression are developed for two-way coupling between particles and the continuous phase. Each aspect of model development is evaluated in canonical flows (homogeneous turbulence, free-shear flows and wall-bounded flows) for which quality measurements are available. ODT simulations of non-isothermal flows provide statistics for particle heating. These simulations show the significance of accurately predicting the joint statistics of particle and fluid dispersion. Inhomogeneous turbulence coupled with the influence of the mean flow fields on particles of varying properties alters particle dispersion. The joint particle-temperature dispersion leads to a distribution of temperature histories predicted by the ODT. Predictions are shown for the lower moments and the full distributions of the particle positions, particle-observed gas temperatures and particle temperatures. An analysis of the time scales affecting particle-temperature interactions covers Lagrangian integral time scales based on temperature autocorrelations, rates of temperature change associated with particle motion relative to the temperature field and rates of diffusional change of temperatures. These latter two time scales have not been investigated previously; they are shown to be strongly intermittent having peaked distributions with long tails. The logarithm of the absolute value of these time scales exhibits a distribution closer to normal.

Hewson, John C.↗

A DNS evaluation of mixing models for transported PDF modelling of turbulent nonpremixed flames

Transported probability density function (TPDF) approaches are well suited to modelling turbulent, reacting, variable density flows. One of the main challenges to the successful deployment of TPDF methods is accurately modelling the unclosed molecular mixing term. This study examines three of the most widely used mixing models: the Interaction by Exchange with the Mean (IEM), Modified Curl (MC) and Euclidean Minimum Spanning Tree (EMST) models. Direct numerical simulation (DNS) data-sets were used to provide both initial conditions and inputs needed over the course of the runs, including the mean flow velocities, mixing frequency, and the turbulent diffusion coefficient. The same chemical mechanism and thermodynamic properties were used, allowing the study to focus on the mixing model. The simulation scenario was a one-dimensional, nonpremixed, turbulent jet flame burning either a syngas or ethylene fuel stream that featured extinction and reignition. This test scenario was selected because extinction and reignition phenomena are sensitive to the mixing model. Three DNS cases were considered for both the syngas and ethylene cases with a parametric variation of Reynolds and Damköhler numbers, respectively. Extinction events became more popular with increasing Reynolds number in the syngas cases and with decreasing Damköhler number in the ethylene cases. The model was first tested with the mixing frequency defined from the dissipation rate and variance of mixture fraction. With this definition, for the syngas cases this study finds that the TPDF method is successful at predicting flame extinction and reignition using all three mixing models for the relatively lower and intermediate Reynolds number cases, but that all models under-predict reignition in the relatively higher Reynolds number case. In the ethylene fuelled cases, only the EMST mixing model correctly predicts the reignition event for the two higher Damköhler number cases, yet, in the lowest Damköhler number case the EMST model over-predicts reignition and the IEM and MC models under-predict it. Mixing frequency was then modelled based on the turbulence frequency and a model constant $C_{\phi}$, the ratio of scalar to mechanical mixing rates. The DNS cases were reexamined with this definition and the findings suggested that the optimal value for $C_{\phi}$ is mixing model and case dependent. In particular, it was found in the ethylene case considered that reignition could be achieved with the IEM and MC models by adjusting the value of $C_{\phi}$.

42 ENGINEERING↗

Statistics of particle time-temperature histories :

Progress toward predictions of the statistics of particle time-temperature histories is presented. These predictions are to be made using Lagrangian particle models within the one-dimensional turbulence (ODT) model. In the present reporting period we have further characterized the performance, behavior and capabilities of the particle dispersion models that were added to the ODT model in the first period. We have also extended the capabilities in two manners. First we provide alternate implementations of the particle transport process within ODT; within this context the original implementation is referred to as the type-I and the new implementations are referred to as the type-C and type-IC interactions. Second we have developed and implemented models for two-way coupling between the particle and fluid phase. This allows us to predict the reduced rate of turbulent mixing associated with particle dissipation of energy and similar phenomena. Work in characterizing these capabilities has taken place in homogeneous decaying turbulence, in free shear layers, in jets and in channel flow with walls, and selected results are presented.

Hewson, John C.↗

Statistics of particle time-temperature histories: Progress report for August 2012

Progress toward predictions of the statistics of particle time-temperature histories is presented. The joint statistics of a scalar like the temperature and an exposure time scale are of interest. We have related these quantities to statistics of conserved scalars, their gradients and their diffusive time scales. Future work will apply the one-dimensional turbulence (ODT) model to evaluate the suitability of these statistics to predicting particle time-temperature histories. To that end, we have reported on past performance of the ODT model and have implemented a Lagrangian particle tracking capability into the ODT code. The results of ODT-driven particle dispersion have been compared with classical experimental data, and preliminary statistics of particle evolution in reacting flows are also reported.

Hewson, John C.↗