Engineering topics

Lin, F. N.

Publications and source records attributed to Lin, F. N..

10 records

NASA NTRS1985

Heat transfer from a simulated shuttle external tank in the naturally turbulent outdoor environment

To estimate the local heat-transfer coefficients around an external-tank (ET) surface, a 9.8-m-high by 8.4-m-diameter ET simulator is constructed, instrumented, and tested in the naturally turbulent outdoor environment. Two different configurations under which the testing is conducted are described. The time-average, local values of Nusselt number at time-average Reynolds numbers of 2.2 x 10 to the 6th, 2.6 x 10 to the 6th, and 4.5 x 10 to the 6th are presented. It is shown that, at the same Reynolds numbers, the heat transfer coefficients due to the atmospheric airflow are higher than those due to airflow in a low-turbulent-intensity wind tunnel.

Lin, F. N.↗

NASA NTRS1985

Economics of liquid hydrogen from water electrolysis

An economical model for preliminary analysis of LH2 cost from water electrolysis is presented. The model is based on data from vendors and open literature, and is suitable for computer analysis of different scenarios for 'directional' purposes. Cost data associated with a production rate of 10,886 kg/day are presented. With minimum modification, the model can also be used to predict LH2 cost from any electrolyzer once the electrolyzer's cost data are available.

Lin, F. N.↗

NASA NTRS1981

Laminar free convection boundary layer heat transfer over non-isothermal surface

Accurate heat transfer results are provided for the case of nonisothermal objects. A steady, laminar, free convection boundary layer flow over two-dimensional or rotationally symmetrical bodies of nonuniform surface temperature situated in an ambient fluid of undisturbed temperature is considered analytically. The surface heat flux is given in terms of the Nusselt number and wall derivatives of universal functions for Prandtl numbers of 0.72 and 100 are provided. The method is shown to be valid up to a temperature/radius ratio of 130 deg.

Lin, F. N.↗

NASA NTRS1981

Torque characteristics of a 122-centimeter butterfly valve with a hydro/pneumatic actuator

Actuating torque data from field testing of a 122-centimeter (48 in.) butterfly valve with a hydro/pneumatic actuator is presented. The hydraulic cylinder functions as either a forward or a reverse brake. Its resistance torque increases when the valve speeds up and decreases when the valve slows down. A reduction of flow resistance in the hydraulic flow path from one end of the hydraulic cylinder to the other will effectively reduce the hydraulic resistance torque and hence increase the actuating torque. The sum of hydrodynamic and friction torques (combined resistance torque) of a butterfly valve is a function of valve opening time. An increase in the pneumatic actuating pressure will result in a decrease in both the combined resistance torque and the actuator opening torque; however, it does shorten the valve opening time. As the pneumatic pressure increases, the valve opening time for a given configuration approaches an asymptotical value.

Lin, F. N.↗

NASA NTRS1979

Laminar boundary-layer flow of non-Newtonian fluid

A solution for the two-dimensional and axisymmetric laminar boundary-layer momentum equation of power-law non-Newtonian fluid is presented. The analysis makes use of the Merk-Chao series solution method originally devised for the flow of Newtonian fluid. The universal functions for the leading term in the series are tabulated for n from 0.2 to 2. Equations governing the universal functions associated with the second and the third terms are provided. The solution together with either Lighthill's formula or Chao's formula constitutes a simple yet general procedure for the calculation of wall shear and surface heat transfer rate. The theory was applied to flows over a circular cylinder and a sphere and the results compared with published data.

Lin, F. N.↗

NASA NTRS1978

Thermal response behavior of boundary-layer flows

This paper presents an approximate, but general, analysis for the thermal response behavior of incompressible, constant property, laminar boundary layer flow over a smooth object of arbitrary shape. It encompasses the classic time-dependent Leveque problem as its special case. Comparisons with available data show that, for fluids with Prandtl number of the order of unity or larger, this analytical solution is able to provide reasonably accurate results for most engineering applications. Under certain restrictive conditions, it can also be used to predict the thermal response of a compressible boundary layer flow.

Lin, F. N.↗

NASA NTRS1978

Predictive capabilities of series solutions for laminar free convection boundary layer heat transfer

Various types of series solutions for predicting laminar, free-convection boundary-layer heat transfer over both isothermal and nonisothermal boundaries are reviewed. The methods include finite difference, Merk series, Blasius series, and Goertler series. Comparative results are presented for heat transfer over an isothermal, horizontal, elliptical cylinder in both slender and blunt configurations.

Lin, F. N.↗

NASA NTRS1976

Laminar free convection from a vertical cone with uniform surface heat flux

The laminar free convection flow from a right circular cone with prescribed uniform wall flux condition is studied. The governing boundary-layer equations are analyzed by the technique of similarity transformation. Numerical solutions to the transformed equations are given for Prandtl numbers 0.72, 1, 2, 4, 6, 8, 10, and 100. Expressions for both wall temperature distribution and wall skin friction distribution at Prandtl number tending to infinity are also presented.

Lin, F. N.↗

NASA NTRS1976

Laminar free convection over two-dimensional bodies with uniform surface heat flux

A general analysis is presented of the steady nondissipative constant-property laminar boundary layer flow over a two-dimensional body of uniform surface heat flux situated in an infinite ambient fluid of undisturbed temperature. The analysis is then applied to a long horizontal circular cylinder. Numerical solutions to the universal functions associated with the first two terms in the derived series are given for Prandtl numbers 0.7, 1, 3, 5, 7, and 10. The results are compared with those obtained by Koh (1964) whose method is patterned after the Blasius-Frossling procedure for forced convection flow. The study reveals that Wilks' (1972) analysis concerning the external natural convection about two-dimensional bodies with constant heat flux is in error.

Lin, F. N.↗

NASA NTRS1975

Space processing convection evaluation - G-jitter convection of confined fluids in low gravity

G-jitter convection, caused by time-varying accelerations imparted on a heated container of fluid in low gravity, is investigated analytically. The mathematical model used is constructed from the Navier-Stokes equations which are solved with a finite-difference method on a digital computer. Results are presented for typical space processing configurations and anticipated g-jitter levels, with emphasis on sounding rocket applications. The calculations indicate that g-jitter can cause significant temperature oscillations, increase or decrease local heat transfer and produce oscillatory convective flow patterns. These factors can have significant effects on important processes such as crystal growth (banding, for example) and separation techniques.

Spradley, L. W.↗