A comparative study of pomegranate Sb@C yolk–shell microspheres as Li and Na-ion battery anodes
A high-packing density pomegranate Sb@C yolk–shell structure has been developed as high-performance anodes for lithium-ion and sodium-ion batteries.
Engineering topics
Publications and source records attributed to Lin, Yuehe.
A high-packing density pomegranate Sb@C yolk–shell structure has been developed as high-performance anodes for lithium-ion and sodium-ion batteries.
The design and synthesis of biocompatible nanomaterials as cargoes for the intracellular delivery of therapeutic proteins or genes have attracted intense attention because of their promise for use in therapeutics. Despite the advances in this area, very few nanomaterials can be efficiently delivered to the cytosol. To address these challenges, we designed and synthesized crystalline nanoflower-like particles from fluorinated sequence-defined peptoids; the crystallinity and fluorination of these particles enabled highly efficient cytosolic delivery with minimal cytotoxicity. We delivered these particles, 80% appear to diffuse in the cytosol. Furthermore, these nanocrystals can carry mRNA for instance and effectively delivered into cytosol for gene transfection, demonstrating the generality of our nanocrystals. Our results indicate that self-assembly of crystalline nanomaterials from fluorinated peptoids paves a new way toward development of nanocargoes with efficient cytosol gene delivery. Y. Song and M. Wang contributed equally to this work. This work was supported by start-up funds from Washington State University. Peptoid synthesis work was supported by the Materials Synthesis and Simulation Across Scales (MS3) Initiative through the LDRD fund at Pacific Northwest National Laboratory (PNNL). Assembly of peptoid particles and their structural characterizations were supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Biomolecular Materials Program at PNNL. XRD work was conducted at the Advanced Light Source with support from the Molecular Foundry, at Lawrence Berkeley National Laboratory, both of which are supported by the Office of Science, under Contrast No. DE-AC02-05CH11231. PNNL is multi-program national laboratory operated for Department of Energy by Battelle under Contract No. DE-AC05-76RL01830.
Ir-based nanomaterials are regarded as state-of-the-art cathode electrocatalysts in proton exchange membrane water electrolyzers (PEMWEs). Engineering the morphology of Ir-based three-dimensional architectures as electrocatalysts toward oxygen evolution reaction (OER) has been rarely studied. Here, we report the gelation of IrxCu metallic hydrogels self-assembled with ultrafine and nanovoid incorporated building blocks for enhancing the electrocatalytic performance toward OER. The composition-optimized Ir3Cu metallic aerogels exhibited improved catalytic activity and durability toward OER. The mesosized voids generated through the in situ galvanic replacement reaction and the macrosized porous systems make a great contribution to the increased number of active sites. First-principle calculations revealed the intrinsic optimized binding energy of Ir by alloying with Cu. The best catalytic performance necessities a balance of the adsorption and desorption energy. The well-defined morphology and enhanced OER electrochemical performances of nanovoid incorporated IrxCu metallic aerogels hold great promise in further applications in PEMWEs.
The great interest in fuel cells inspires a substantial amount of research on nonprecious metal catalysts as alternatives to Pt-based oxygen reduction reaction (ORR) electrocatalysts. In this work, bimodal template-based synthesis strategies are proposed for the scalable preparation of hierarchically porous M-N-C (M = Fe or Co) single-atom electrocatalysts featured with active and robust MN 2 active moieties. Multiscale tuning of M-N-C catalysts regarding increasing the number of active sites and boosting the intrinsic activity of each active site is realized simultaneously at a single-atom scale. In addition to the antipoisoning power and high affinity for O 2 , the optimized Fe-N-C catalysts with FeN 2 active site presents a superior electrocatalytic activity for ORR with a half-wave potential of 0.927 V (vs reversible hydrogen electrode (RHE)) in an alkaline medium, which is 49 and 55 mV higher than those of the Co-N-C counterpart and commercial Pt/C, respectively. Density functional theory calculations reveal that the FeN 2 site is more active than the CoN 2 site for ORR due to the lower energy barriers of the intermediates and products involved. In conclusion, the present work may help rational design of more robust ORR electrocatalysts at the atomic level, realizing the significant advances in electrochemical conversion and storage devices.
Modification of the noble metal-based aerogels from the atomic scale is rarely being investigated despite the rapid development of various metallic aerogels. Recent studies have verified that Pd ensembles are more effective than isolated Pd atoms toward electrooxidation of ethanol. However, the electrocatalytic efficiency is still insufficient. Here, for the first time, we successfully anchored Pd-ensembles on the surface of Au 2 Cu metallic hydrogels via kinetically controlled galvanic displacement reaction. The atomic configuration optimized Au 2 Cu@Pd metallic aerogels exhibited significantly enhanced mass activity ~11.6 times of commercial Pd and excellent stability with remained 90 % of mass activity after 300 potential cycle test. The ligand effect and geometric effect generated by the finely tailored atomic configurations including Pd ensembles and core-shell structure are critical for enhancing electrocatalytic efficiencies. Furthermore, the Pd ensembles anchored-Au 2 Cu aerogels hold a great promise for being potentially applied in devices such as direct alcohol fuel cells, biosensors and electronics.
Sodium-ion batteries (SIBs) as economical high energy alternatives to lithium-ion batteries (LIBs) have received significant attention for large-scale energy storage in the last few years. While the efforts of developing SIBs have benefited from the knowledge learned in LIBs, thanks to the apparent proximity between Na-ion and Li-ion, the unique physical and chemical properties of Na-ion also distinctly differ itself from Li-ion. It is expected SIBs have drastically different electrode material structure, solvation-de-solvation behavior, electrode-electrolyte interphase stability, ion transfer property, and hence electrochemical performance of batteries. In this review, we comprehensively summarize the current understanding of the anode solid-electrolyte-interphase (SEI) and cathode cathode-electrolyte-interphase (CEI) in SIBs, with an emphasis on how the tuning of the stability and ion transfer properties of interphases fundamentally determines the reversibility and efficiency of electrochemical reactions. Through these carefully screened references, we intend to reveal the intrinsic correlation between the properties/functionalities of the interphases and the electrochemical performances of batteries.
Delicately engineering well-defined noble metal aerogels with favorable structural and compositional features is of vital importance for wide applications. Here, we reported a one-pot and facile method for synthesizing core–shell PdPb@Pd hydrogels/aerogels with multiply-twinned grains and an ordered intermetallic phase using sodium hypophosphite as a multifunctional reducing agent. Due to the accelerated gelation kinetics induced by increased reaction temperature and the specific function of sodium hypophosphite, the formation of hydrogels can be completed within 4 h. As a result, owing to their unique porous structure and favorable geometric and electronic effects, the optimized PdPb@Pd aerogels exhibit enhanced electrochemical performance towards ethylene glycol oxidation with a mass activity of 5.8 times higher than Pd black.
The shape control of Ir-based nanostructured materials, which are considered as the state-of-the-art anode electrocatalyst candidates toward the oxygen evolution reaction (OER), has been rarely reported. In this study, we reported an efficient synthesis of ultrathin dendritic IrTe nanotubes (NTs) via a galvanic replacement reaction using Te nanowires as the template at 190 °C for 1 h. The as-obtained IrTe NTs exhibited improved electrocatalytic activity and stability toward the OER with a much smaller overpotential of 290 mV and Tafel slope of 60.3 mV dec –1 to attain a current density of 10 mA cm –2 in acidic medium, compared with commercial IrO 2 nanoparticles. Moreover, IrTe NTs also demonstrated enhanced electrocatalytic performances in neutral and alkaline media. The outstanding electrochemical properties of IrTe NTs in a wide pH range hold great promise in energy storage and conversion devices.
A self-supporting and flexible activated carbon/carbon nanotube/reduced graphene oxide (AC/CNT/RGO) film has been rationally designed for constructing high- performance supercapacitor. The AC/CNT/RGO film is prepared by anchoring the AC particles with a 3D and porous framework built by hierarchically weaving the 1 D CNT and 2D RGO using their intrinsic van der Waals force. The CNT network is beneficial for improving the electronic conductivity of the electrode, while the AC particles could effectively suppress the aggregation of RGO and CNT due to their blocking effect. The synergistic effects among the AC, CNT and RGO validate the AC/CNT/RGO as a promising electrode for supercapacitor, exhibiting greatly enhanced electrochemical performances in comparison with the pure RGO film, pure CNT film and AC electrode. The AC/CNT/RGO electrode delivers a high specific capacitance of 101 F g-1 at the current density of 0.2 A g-1, offering a maximum energy density of 30.0 W h kg-1 in organic electrolyte at the cut-off voltage range of 0.001~3.0 V. The findings of this work open a new avenue for the design of self-supporting electrodes for the development of flexible and light weight energy storage supercapacitor.
Manganese dioxide nanoflowers (MnO2 NFs) were synthesized and utilized as a dual readout probe to develop a novel immunochromatographic test strip (ITS) for detecting pesticide residues using chlorpyrifos as the model analyte. MnO2 NFs-labeled antibody for chlorpyrifos was employed as the signal tracer for conducting the ITS. After 10-min competitive immunoreaction, the tracer antibody was captured by the immobilized immunogen on test line in the test strip, resulting in the accumulation of MnO2 NFs. The accumulation of MnO2 NFs led to the appearance of brown color on the test line, which could be easily observed by the naked eye as a qualitative readout. Moreover, MnO2 NFs showed a remarkably enhancing effect on the luminol-H2O2 chemiluminescent (CL) system. Unlike peroxidase-like nanomaterials, the enhancing mechanism of MnO2 NFs was based on its oxidant activity to decompose H2O2 for forming reactive oxygen species. After initiating the CL system in the test zone, strong CL signal was collected as a quantitative readout to sensitively detect chlorpyrifos. Under optimal conditions, the linear range of chlorpyrifos was 0.1–50 ng/mL with a low detection limit of 0.033 ng/mL (S/N = 3). The reliability of the dual-readout ITS was successfully demonstrated by the application on traditional Chinese medicine and environmental water samples. Due to the simultaneous rapid-qualitative and sensitive-quantitative detection, the dual-readout protocol provides a promising strategy for rapid screening and field assay on various areas such as environmental monitoring, food safety and point-of-care testing.
As one of the alternatives to replace precious metal catalysts, transition-metal–nitrogen–carbon (M–N–C) electrocatalysts have attracted great research interest due to their low cost and good catalytic activities. Despite nanostructured M–N–C catalysts can achieve good electrochemical perfor-mances, they are vulnerable to aggregation and insufficient catalytic sites upon continuous catalytic reaction. In this work, metal–organic frameworks derived porous single-atom electrocatalysts (SAEs) were successfully prepared by simple pyrolysis procedure without any further posttreatment. Combining the X-ray absorption near-edge spectroscopy and electrochemical measure-ments, the SAEs have been identified with superior oxygen reduction reaction (ORR) activity and stability compared with Pt/C catalysts in alkaline condition. More impressively, the SAEs also show excellent ORR electrocatalytic perfor-mance in both acid and neutral media. This study of nonprecious catalysts provides new insights on nanoengineering catalytically active sites and porous structures for nonprecious metal ORR catalysis in a wide range of pH.
Despite recent advances in assembly of organic nanotubes, conferral of sequence-defined engineering and dynamic response characteristics to the tubules remains a challenge. Here we report a new family of highly-designable and dynamic single-walled nanotubes assembled from sequence-defined peptoids through a unique “rolling-up and closure of nanosheet” mechanism. During the assembly process, amorphous spherical particles of amphiphilic peptoid oligomers (APOs) crystallized to form well-defined nanosheets which were then folded to form single-walled peptoid nanotubes (SW-PNTs). These SW-PNTs undergo a pH-triggered, reversible contraction-expansion motion. By varying the number of hydrophobic residues of APOs, we demonstrate the tuning of PNT wall thickness and diameter, and mechanical properties. AFM-based mechanical measurements indicate that PNTs are highly stiff (Young’s Modulus ~13-17 GPa), comparable to the stiffest known biological materials. We further demonstrate that the precise incorporation of functional groups within PNTs and the application of functional PNTs in water decontamination. We believe these SW-PNTs can provide a robust platform for development of biomimetic materials tailored to specific applications.
Intermetallic nanocrystals are currently receiving extensive attentions due to their well- defined crystal structures, highly ordered atomic distribution and superior structural stability that endow them with optimized catalytic activities, stabilities and high selectivity as electrocatalysts for fuel cells. Here, for the first time, we reported the facile synthesis of intermetallic Pd3Pb nanowire networks (IM-Pd3Pb NNs) with a one-step wet-chemical strategy at a relatively low temperature (i.e. 170 °C) in 1 h. The as-prepared IM-Pd3Pb NNs exhibited superior bifunctional catalytic performances toward oxygen reduction reaction (ORR) and ethanol oxidation reaction (EtOR) compared to commercial Pt/C and Pd black, respectively. Significantly, IM-Pd3Pb NNs also showed excellent methanol- and CO-tolerant ability as ORR cathode and EtOR anode electrocatalysts, respectively. The electrochemical active surface area and mass activity of IM-Pd3Pb NNs are about 3.4 times and 2 times higher than Pd black toward EtOR, respectively. As the Pt-free bifunctional electrocatalysts, 3D IM-Pd3Pb architectures with exceptional catalytic performances hold great promise in various applica-tions of energy conversion and storage devices, sensors, electronics, optics and so on.
Lithium sulfur (LiS) batteries are promising alternatives to conventional Li-ion batteries in terms of specific capacity and energy. But, the technical challenges raised from the soluble polysulfide (PS) in organic electrolyte deter their implementation in practical applications. Nanoengineered structure and chemical adsorptive materials hold great promise in mitigating the PS migration problem. We develop a tubular titanium oxide (TiO 2 )/reduced graphene oxide (rGO) composite structure (TG) as a sulfur hosting material for constructing better performed LiS batteries. The TG/sulfur cathode (TG/S) is able to deliver ~1200 mAh g -1 specific capacity with stable operation for over 550 cycles. Moreover, the TG/S composite cathode shows stable Coulombic efficiencies of over ~95% at various C rates, which are ~10% higher than those of the rGO/sulfur (G/S) counterparts. The superior electrochemical performances of TG/S could be ascribed to the synergistic effects between the conductive rGO support and the physically/chemically absorptive TiO 2 , that is, the spatial tubular structure of TiO 2 provides intimate contact and physical confinement for sulfur, while the polar TiO 2 in TG/S shows strong chemical interaction towards the sulfur species.
Investigation of highly active and cost-efficient electrocatalysts for oxygen reduction reaction is of great importance in a wide range of clean energy devices, including fuel cells and metal-air batteries. Herein, the simultaneous formation of Co9S8 and N,S-codoped carbon was achieved in a dual templates system. First, Co(OH)2 nanosheets and tetraethyl orthosilicate were utilized to direct the formation of two-dimensional carbon precursors, which were then dispersed into thiourea solution. After subsequent pyrolysis and templates removal, N/S-codoped porous carbon sheets confined Co9S8 catalysts (Co9S8/NSC) were obtained. Owing to the morphological and compositional advantages as well as the synergistic effects, the resultant Co9S8/NSC catalysts with modified doping level and pyrolysis degree exhibit superior ORR catalytic activity and long-term stability compared with the state-of-the-art Pt/C catalyst in alkaline media. Remarkably, the as-prepared carbon composites also reveal exceptional tolerance of methanol, indicating their potential applications in fuel cells.
Despite great advances in sodium-ion battery developments, the search for high energy and stable anode materials remains a challenge. Alloy or conversion-typed anode materials are attractive candidates of high specific capacity and low voltage potential, yet their applications are hampered by the large volume expansion and hence poor electrochemical reversibility and fast capacity fade. Here, we use antimony (Sb) as an example to demonstrate the use of yolk-shell structured anodes for high energy Na-ion batteries. The Sb@C yolk-shell structure prepared by controlled reduction and selective removal of Sb2O3 from carbon coated Sb2O3 nanoparticles can accommodate the Sb swelling upon sodiation and improve the structural/electrical integrity against pulverization. It delivers a high specific capacity of ~554 mAh•g-1, good rate capability (315 mhA•g-1 at 10C rate) and long cyclability (92% capacity retention over 200 cycles). Full-cells of O3-Na0.9[Cu0.22Fe0.30Mn0.48]O2 cathodes and Sb@C-hard carbon composite anodes demonstrate a high specific energy of ~130 Wh•kg-1 (based on the total mass of cathode and anode) in the voltage range of 2.0-4.0 V, ~1.5 times energy of full-cells with similar design using hard carbon anodes.
Simultaneous detection and imaging of multiple intracellular messenger RNA (mRNAs) hold great significant for early cancer diagnostics and preventive medicine development. Herein, we propose a multiple-targeted graphene oxide (GO) nanocarrier that can simultaneously detect and image different type mRNAs in living cells. First of all, in vitro detection of multiple targets have been realized successfully based on the multiple-targeted GO nanocarrier with linear relationship ranging from 3 nM to 200 nM, as well as sensitive detection limit of 1.84 nM for manganese superoxide dismutase (Mn-SOD) mRNA and 2.45 nM for β-actin mRNA. Additionally, this nanosensing platform composed of fluorescent labeled single strand DNA probes and GO nanocarrier can identify Mn-SOD mRNA and endogenous mRNA of β-actin in living cancer cells, showing rapid response, high specificity, nuclease stability, and good biocompatibility during the cell imaging. Thirdly, changes of the expression levels of mRNA in living cells before or after the drug treatment can be monitored successfully. By using multiple ssDNA as probes and GO nanocarrier as the cellular delivery cargo, the proposed simultaneous multiple-targeted sensing platform will be of great potential as a powerful tool for intracellular trafficking process from basic research to clinical diagnosis.