Search NASA⌕ Search

Engineering topics

Lin, Zhiqun

Publications and source records attributed to Lin, Zhiqun.

Investigation into the crystal structure–dielectric property correlation in barium titanate nanocrystals of different sizes

For high capacitance multilayer ceramic capacitors, high dielectric constant and lead-free ceramic nanoparticles are highly desired. However, as the particle size decreases to a few tens of nanometers, their dielectric constant significantly decreases, and the underlying mechanism has yet to be fully elucidated. Herein, we report a systematic investigation into the crystal structure–dielectric property relationship of combustion-made BaTiO 3 (BTO) nanocrystals. When the nanocrystal size was 100 nm and below, a metastable paraelectric cubic phase was found in the as-received BTO (denoted as arBTO) nanocrystals based on an X-ray diffraction (XRD) study. A stable ferroelectric tetragonal phase was present when the nanocrystal size was above 200 nm. Notably, the cubic arBTO (particle size ≤100 nm) exhibited tetragonal fluctuations as revealed by Raman spectroscopy, whereas the tetragonal arBTO (particle size ≥200 nm) contained ~10% cubic fraction according to the Rietveld fitting of the XRD profiles. Thermal annealing of the multi-grain tetragonal arBTO at 950 °C yielded single crystals of annealed BTO (denoted as anBTO), whose dielectric constants were higher than those of arBTO. However, the single crystalline anBTO prevented the formation of 90° domains; therefore, they exhibited a low dielectric constant of ~300. Although X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy could not identify the exact structural defects, our study revealed that surface and bulk defects formed during synthesis affect the final crystal structures and thus the dielectric properties of BTO nanocrystals with different sizes. Finally, the understanding obtained from this study will help us design high dielectric constant perovskite nanocrystals for next-generation multilayer ceramic capacitor applications.

36 MATERIALS SCIENCE↗

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control

Significance The ability to scrutinize the correlation of dimension, composition, and dopant to electrocatalytic performance renders the development of highly active electrocatalysts. This work reports a general and robust strategy for crafting uniform perovskite oxide nanoparticles (i.e., BaTiO 3 and La- and Co-doped BaTiO 3 ) with controlled sizes and dopant compositions by employing amphiphilic star-like diblock copolymers as nanoreactors. Their size- and dopant-dependent oxygen reduction reaction (ORR) performances are unveiled. Particularly, La- and Co-doped BaTiO 3 nanoparticles exhibit markedly improved ORR activities over the pristine counterparts due to reduced free energy barrier of ORR and increased conductivity as substantiated by density functional theory. The nanoreactor strategy could be conveniently extended to yield various functional nanomaterials of interest with tailored sizes and compositions for electrocatalysis.

36 MATERIALS SCIENCE↗

Unconventional route to dual-shelled organolead halide perovskite nanocrystals with controlled dimensions, surface chemistry, and stabilities

The past few years have witnessed rapid advances in the synthesis of high-quality perovskite nanocrystals (PNCs). However, despite the impressive developments, the stability of PNCs remains a substantial challenge. The ability to reliably improve stability of PNCs while retaining their individual nanometer size represents a critical step that underpins future advances in optoelectronic applications. Here, we report an unconventional strategy for crafting dual-shelled PNCs (i.e., polymer-ligated perovskite/SiO 2 core/shell NCs) with exquisite control over dimensions, surface chemistry, and stabilities. In stark contrast to conventional methods, our strategy relies on capitalizing on judiciously designed star-like copolymers as nanoreactors to render the growth of core/shell NCs with controlled yet tunable perovskite core diameter, SiO 2 shell thickness, and surface chemistry. Consequently, the resulting polymer-tethered perovskite/SiO 2 core/shell NCs display concurrently a stellar set of substantially improved stabilities (i.e., colloidal stability, chemical composition stability, photostability, water stability), while having appealing solution processability, which are unattainable by conventional methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling Tailorable Optical Properties and Markedly Enhanced Stability of Perovskite Quantum Dots by Permanently Ligating with Polymer Hairs

Abstract Instability of perovskite quantum dots (QDs) toward humidity remains one of the major obstacles for their long‐term use in optoelectronic devices. Herein, a general amphiphilic star‐like block copolymer nanoreactor strategy for in situ crafting a set of hairy perovskite QDs with precisely tunable size and exceptionally high water and colloidal stabilities is presented. The selective partition of precursors within the compartment occupied by inner hydrophilic blocks of star‐like diblock copolymers imparts in situ formation of robust hairy perovskite QDs permanently ligated by outer hydrophobic blocks via coprecipitation in nonpolar solvent. These size‐ and composition‐tunable perovskite QDs reveal impressive water and colloidal stabilities as the surface of QDs is intimately and permanently ligated by a layer of outer hydrophobic polymer hairs. More intriguingly, the readily alterable length of outer hydrophobic polymers renders the remarkable control over the stability enhancement of hairy perovskite QDs.

Yoon, Young Jun↗

Stable Perovskite Core-Shell Nanocrystals as Down-Converting Phosphors for Solid State Lighting

Colloidal perovskite quantum dots (QDs) or nanocrystals (NCs) with structure of CsPbX 3 (X = Cl, Br, I) are promising materials as down-converting phosphors due to their high quantum yield up to >90%, extremely narrow emission band ~15-30 nm, and tunable emission wavelengths of ~410-700 nm via size or composition control. Compared to other QD materials, the optical and electronic properties of perovskite NCs are much more tolerant to defects so highly efficient light-emitting NCs can be easily prepared without carefully removing surface defects. Also, precision size control is not required for obtaining perovskite NCs with narrow emission <30 nm and can greatly enhance the reproducibility and yield rate during mass production. The challenges in using perovskite NCs as LED phosphors are their hygroscopic nature and self-absorption as observed from other QDs. We propose to synthesize core-shell structure perovskite NCs to improve their stability by over-coating a SiO 2 layer, followed by further sol-gel processing into stable micro-sized glass beads. To increase Stokes shift and avoid self-absorption, core/graded-shell/shell structure such as CsSnBr 3 /CsSn 1-x Pb x Br 3 /CsPbBr 3 NCs will be prepared, similar to a concept we demonstrated before in CdSe/Cd 1-x ZnxSe 1-y S y /ZnS structure with significantly separated absorption and emission bands. These NC materials will be integrated into films and used as remote or on-chip downconverters for high efficiency, high CRI and warm white LED. To achieve this goal, PhosphorTech Corporation (PTC) has teamed with Georgia Tech (GT) to develop this unique perovskite system for pcLEDs that offers the promise of high luminous efficacy over a broad temperature and optical flux range.

36 MATERIALS SCIENCE↗

Robust lasing modes in coupled colloidal quantum dot microdisk pairs using a non-Hermitian exceptional point

Evanescently coupled pairs of microdisk lasers have emerged as a useful platform for studying the non-Hermitian physics of exceptional points. It remains an open question how scalable and versatile such phenomena can be when carried over to other designs. Here we have studied the effect of gain/loss modulation in an evanescently coupled pair of microdisk optical resonators fabricated from solution-processed colloidal quantum dots. The emission spectra of these structures are sensitive to small imperfections, which cause frequency-splitting of the whispering gallery modes. Despite this inherent disorder, we found that when spatially modulating the optical pump to vary the gain differential between the coupled microdisks, the coupling drives the split parasitic intra-cavity modes into coalescence at an exceptional point of the resulting three-mode system. This unusual behavior is rationalized via a Hamiltonian that incorporates the intra-cavity coupling as well as the anisotropic inter-cavity coupling between modes in the microdisk pair.

36 MATERIALS SCIENCE↗

Heteroatom-Doped Porous Carbon Materials with Unprecedented High Volumetric Capacitive Performance

The design of carbon-based materials with a high mass density and large porosity has always been a challenging goal, since they fulfill the demands of next-generation supercapacitors and other electrochemical devices. We report a new class of high-density heteroatom-doped porous carbon that can be used as an aqueous-based supercapacitor material. The material was synthesized by an in situ dehalogenation reaction between a halogenated conjugated diene and nitrogen-containing nucleophiles. Under the given conditions, pyridinium salts can only continue to perform the dehalogenation if there is residue water remaining from the starting materials. The obtained carbon materials are highly doped by various heteroatoms, leading to high densities, abundant multimodal pores, and an excellent volumetric capacitive performance. Porous carbon tri-doped with nitrogen, phosphorous, and oxygen exhibits a high packing density (2.13 g cm -3 ) and an exceptional volumetric energy density (36.8 Wh L -1 ) in alkaline electrolytes, making it competitive to even some Ni-MH cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis of hollow SnO{sub 2} spheres with excellent electrochemical performance for anodes in lithium ion batteries

Highlights: • Hollow SnO{sub 2} spheres were synthesized by NaF via employing hydrothermal method. • The microstructure of hollow spheres can be judiciously controlled by adjusting the amount of NaF. • Their high capacity reversibility and long-term cycling stability were demonstrated. • Their excellent rate performance was also exhibited. - Abstract: Hollow SnO{sub 2} spheres with oriented cone-like SnO{sub 2} nanoparticle shells were synthesized by a one-step hydrothermal process using NaF as the morphology controlling agent. The resulting hollow SnO{sub 2} sphere electrode exhibits high reversible capacity (initial charge and discharge capacities of 1342.9 and 1947.6 mAh/g at 0.1 C and 1235.4 and 1741.3 mAh/g at 1 C) and good cycling stability (discharge capacities maintained 758.1 and 449.6 mAh/g after 100 cycles at 0.1 C and 1 C, respectively). Good rate performance was also obtained (1234.5 mAh/g at 0.1 C, 884.2 mAh/g at 0.2 C, 692.4 mAh/g at 0.5 C, 497.6 mAh/g at 1 C, 315.8 mAh/g at 2 C and 80.6 mAh/g at 5 C, and more importantly, when the current density returns to 0.1 C, a capacity of 869.6 mAh/g can be recovered. The observed electrochemical performance can attributed to the hollow structure, the use of NaF for morphology control and the unique oriented cone-like shell of the particles.

36 MATERIALS SCIENCE↗

Ab Initio Simulation of Charge Transfer at the Semiconductor Quantum Dot/TiO 2 Interface in Quantum Dot-Sensitized Solar Cells

Quantum dot-sensitized solar cells (QDSSCs) have emerged as a promising solar architecture for next-generation solar cells. The QDSSCs exhibit a remarkably fast electron transfer from the quantum dot (QD) donor to the TiO 2 acceptor with size quantization properties of QDs that allows for the modulation of band energies to control photoresponse and photoconversion efficiency of solar cells. In order to understand the mechanisms that underpin this rapid charge transfer, the electronic properties of CdSe and PbSe QDs with different sizes on the TiO 2 substrate are simulated using a rigorous ab initio density functional method. Our method capitalizes on localized orbital basis set, which is computationally less intensive. Quite intriguingly, a remarkable set of electron bridging states between QDs and TiO 2 occurring via the strong bonding between the conduction bands of QDs and TiO 2 is revealed. Such bridging states account for the fast adiabatic charge transfer from the QD donor to the TiO 2 acceptor, and may be a general feature for strongly coupled donor/acceptor systems. All the QDs/TiO 2 systems exhibit type II band alignments, with conduction band offsets that increase with the decrease in QD size. This facilitates the charge transfer from QDs donors to TiO 2 acceptors and explains the dependence of the increased charge transfer rate with the decreased QD size.

14 SOLAR ENERGY↗