Engineering topics

Ling, Xufeng

Publications and source records attributed to Ling, Xufeng.

6 records

DOE OSTI2021

Combined Precursor Engineering and Grain Anchoring Leading to MA‐Free, Phase‐Pure, and Stable α‐Formamidinium Lead Iodide Perovskites for Efficient Solar Cells

Abstract α‐Formamidinium lead iodide (α‐FAPbI 3 ) is one of the most promising candidate materials for high‐efficiency and thermally stable perovskite solar cells (PSCs) owing to its outstanding optoelectrical properties and high thermal stability. However, achieving a stable form of α‐FAPbI 3 where both the composition and the phase are pure is very challenging. Herein, we report on a combined strategy of precursor engineering and grain anchoring to successfully prepare methylammonium (MA)‐free and phase‐pure stable α‐FAPbI 3 films. The incorporation of volatile FA‐based additives in the precursor solutions completely suppresses the formation of non‐perovskite δ‐FAPbI 3 during film crystallization. Grains of the desired α‐phase are anchored together and stabilized when 4‐ tert ‐butylbenzylammonium iodide is permeated into the α‐FAPbI 3 film interior via grain boundaries. This cooperative scheme leads to a significantly increased efficiency close to 21 % for FAPbI 3 perovskite solar cells. Moreover, the stabilized PSCs exhibit improved thermal stability and maintained ≈90 % of their initial efficiency after storage at 50 °C for over 1600 hours.

Ling, Xufeng↗

DOE OSTI2021

Combined Precursor Engineering and Grain Anchoring Leading to MA-Free, Phase-Pure, and Stable α-Formamidinium Lead Iodide Perovskites for Efficient Solar Cells

a-Formamidinium lead iodide (a-FAPbI 3 ) is one of the most promising candidate materials for high-efficiency and thermally stable perovskite solar cells (PSCs) owing to its outstanding optoelectrical properties and high thermal stability. However, achieving a stable form of a-FAPbI 3 where both the composition and the phase are pure is very challenging. In this work, we report on a combined strategy of precursor engineering and grain anchoring to successfully prepare methylammonium (MA)-free and phase-pure stable a-FAPbI 3 films. The incorporation of volatile FA-based additives in the precursor solutions completely suppresses the formation of non-perovskite d-FAPbI 3 during film crystallization. Grains of the desired a-phase are anchored together and stabilized when 4-tert-butylbenzylammonium iodide is permeated into the a-FAPbI 3 film interior via grain boundaries. This cooperative scheme leads to a significantly increased efficiency close to 21% for FAPbI 3 perovskite solar cells. Moreover, the stabilized PSCs exhibit improved thermal stability and maintained ~90 % of their initial efficiency after storage at 50 degrees C for over 1600 hours.

14 SOLAR ENERGY↗

DOE OSTI2021

The effect of water on colloidal quantum dot solar cells

Almost all surfaces sensitive to the ambient environment are covered by water, whereas the impacts of water on surface-dominated colloidal quantum dot (CQD) semiconductor electronics have rarely been explored. Here, strongly hydrogen-bonded water on hydroxylated lead sulfide (PbS) CQD is identified. The water could pilot the thermally induced evolution of surface chemical environment, which significantly influences the nanostructures, carrier dynamics, and trap behaviors in CQD solar cells. The aggravation of surface hydroxylation and water adsorption triggers epitaxial CQD fusion during device fabrication under humid ambient, giving rise to the inter-band traps and deficiency in solar cells. To address this problem, meniscus-guided-coating technique is introduced to achieve dense-packed CQD solids and extrude ambient water, improving device performance and thermal stability. Our works not only elucidate the water involved PbS CQD surface chemistry, but may also achieve a comprehensive understanding of the impact of ambient water on CQD based electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Surface Ligand Management Aided by a Secondary Amine Enables Increased Synthesis Yield of CsPbI 3 Perovskite Quantum Dots and High Photovoltaic Performance

Lead-halide perovskite quantum dots (PQDs) or more broadly, nanocrystals possess advantageous features for solution-processed photovoltaic devices. The nanocrystal surface ligands play a crucial role in the transport of photogenerated carriers and ultimately affect the overall performance of PQD solar cells. Here, significantly improved CsPbI 3 PQD synthetic yield and solar-cell performance through surface ligand management are demonstrated. The treatment of a secondary amine, di- n -propylamine (DPA), provides a mild and efficient approach to control the surface ligand density of PQDs, which has an apparently different working mechanism compared to previously reported surface treatments. Using an optimal DPA concentration, the treatment can simultaneously remove both long-chain insulating surface ligands of oleic acid and oleylamine, even for unpurified PQDs with high ligand density. As a result, the electrical coupling between PQDs is enhanced, leading to improved charge transport, reduced carrier recombination, and a high power conversion efficiency approaching 15% for CsPbI 3 -PQD-based solar cells. In addition, the production yield of CsPbI 3 PQDs can be increased by a factor of 8. These results highlight the importance of developing new ligand-management strategies, specifically for emerging PQDs to achieve scalable and high-performance perovskite-based optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Guanidinium-Assisted Surface Matrix Engineering for Highly Efficient Perovskite Quantum Dot Photovoltaics

Metal halide perovskite quantum dots (Pe-QDs) are of great interest in new-generation photovoltaics (PVs). However, it remains challenging in the construction of conductive and intact Pe-QD films to maximize their functionality. Herein, a ligand-assisted surface matrix strategy to engineer the surface and packing states of Pe-QD solids is demonstrated by a mild thermal annealing treatment after ligand exchange processing (referred to as “LE-TA”) triggered by guanidinium thiocyanate. The “LE-TA” method induces the formation of surface matrix on CsPbI 3 QDs, which is dominated by the cationic guanidinium (GA+) rather than the SCN-, maintaining the intact cubic structure and facilitating interparticle electrical interaction of QD solids. Consequently, the GA-matrix-confined CsPbI 3 QDs exhibit remarkably enhanced charge mobility and carrier diffusion length compared to control ones, leading to a champion power conversion efficiency of 15.21% when assembled in PVs, which is one of the highest among all Pe-QD solar cells. Additionally, the “LE-TA” method shows similar effects when applied to other Pe-QD PV systems like CsPbBr 3 and FAPbI 3 (FA = formamidinium), indicating its versatility in regulating the surfaces of various Pe-QDs. This work may afford new guidelines to construct electrically conductive and structurally intact Pe-QD solids for efficient optoelectronic devices.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects

“Go big or go home” could never be a truer statement, especially when it comes to energy. The world population is increasing, the energy use per person is growing more rapidly, and the total electricity use per person is growing even more quickly than that. To handle this demand, energy production must be increased, and it is vital for renewable sources to be used. Currently three quarters of a terawatt of power generated from photovoltaics (PVs) has been installed. At a somewhat optimistic average power-conversion efficiency of 18%, the distributed surface area of high purity optoelectronic grade semiconductor photovoltaic panels pointed at the sun is substantially larger than the area of the whole state of Rhode Island or nearly double the land mass of Luxembourg. While photovoltaic production continues to ramp to immense proportions, perovskite semiconductors are poised to greatly complement existing technology. On the other end of the size spectrum, the study of semiconductor nanocrystals or quantum dots (QDs) has led to advanced structures and deeper understanding within halide perovskite semiconductors. In this article, we show how the development of nanoscale metal halide perovskite semiconductors have gained prominence surpassing all other QD materials in terms of efficiency, and are becoming a platform for further improving technology to solve big energy challenges.

14 SOLAR ENERGY↗