Search NASA⌕ Search

Engineering topics

Liu, Bing

Publications and source records attributed to Liu, Bing.

At least 37 records · Page 2

AUX1 acts upstream of PIN2 in regulating root gravitropism

Highlights: • AUX1 acts upstream of PIN2 in the control of root gravitropism by regulating the asymmetric auxin distribution. AUX1 and PIN2 auxin transporter are required for the asymmetric distribution of auxin for root gravitropic response. However, the relationship between AUX1 and PIN2 in root gravitropism is unclear. Here, we report that aux1-T mutant show stronger defects in root gravitropism than pin2-T, and aux1-T pin2-T double mutants display similar agravitropic phenotype to aux1-T. The gravity-induced asymmetric distribution of auxin responses could not be established in pin2-T, aux1-T and aux1-T pin2-T mutants; whereas aux1-T pin2-T double mutants showed similar auxin responses to aux1-T mutant. These findings support AUX1 plays a role in root gravitropism upstream of PIN2.

60 APPLIED LIFE SCIENCES↗

Intrinsic Quantum Anomalous Hall Effect with In-Plane Magnetization: Searching Rule and Material Prediction

So far, most theoretically predicted and experimentally confirmed quantum anomalous Hall effects (QAHEs) are limited in two-dimensional (2D) materials with out-of-plane magnetization. In this Letter, starting from 2D nodal-line semimetal, a general rule for searching QAHE with in-plane magnetization is mapped out. Because of spin-orbital coupling, we found that the magnetization will prefer an in-plane orientation if the orbital of degenerate nodal-line states at the Fermi level have the same absolute value of magnetic quantum number. Moreover, depending on the broken or conserved mirror symmetry, either a QAHE or 2D semimetal can be realized. Based on first principles calculations, we further predict a real material of monolayer LaCl to be an intrinsic QAHE with in-plane magnetization. By tuning the directions of in-plane magnetization, the QAHE in LaCl demonstrates a threefold rotational symmetry with a Chern number of either +1 or –1 , and the transition point is characterized by a 2D semimetal phase. All these features are quantitatively reproduced by tight-binding model calculations, revealing the underlying physics clearly. Here, our results greatly extend the scope for material classes of QAHE and hence stimulate immediate experimental interest.

2-dimensional systems↗

Climate Change Impact and Adaptation for Wheat Protein

Wheat grain protein concentration is an important determinant of wheat quality for human nutrition that is often overlooked in efforts to improve crop production. We tested and applied a 32‐multi‐model ensemble to simulate global wheat yield and quality in a changing climate. Potential benefits of elevated atmospheric CO2 concentration by 2050 on global wheat grain and protein yield are likely to be negated by impacts from rising temperature and changes in rainfall, but with considerable disparities between regions. Grain and protein yields are expected to be lower and more variable in most low‐rainfall regions, with nitrogen availability limiting growth stimulus from elevated CO2. Introducing genotypes adapted to warmer temperatures (and also considering changes in CO2 and rainfall) could boost global wheat yield by 7% and protein yield by 2%, but grain protein concentration would be reduced by −1.1 percentage points, representing a relative change of −8.6%. Climate change adaptations that benefit grain yield are not always positive for grain quality, putting additional pressure on global wheat production.

grain protein↗

Facile synthesis of interconnected mesoporous ZnMn2O4 nano-peanuts for Li-storage via distinct structure design

Highlights: • Interconnected mesoporous ZnMn{sub 2}O{sub 4} nano-peanuts were successfully synthesized. SS • Novel ZnMn{sub 2}O{sub 4} have three structural features: special mesoporous structure, high specific surface and interconnected walls. • The interconnected mesoporous structure can buffer volume change and avoid particle aggregation. • The ZnMn{sub 2}O{sub 4} nano-peanuts delivered high stable reversible lithium storage properties. - Abstract: The ZnMn{sub 2}O{sub 4} nano-peanuts with diameters of 16–25 nm have been successfully prepared through a simple one-step surfactant-assisted solvothermal process. The as-synthesized ZnMn{sub 2}O{sub 4} exhibits novel interconnected mesoporous hierarchical architecture, which possesses three advantages: special mesoporous structure, high specific surface and interconnected walls. On one hand, the interconnected structure can provide sufficient surface reaction sites to fully contact Li{sup +} with the electrolyte and improve Li{sup +} diffusion and electron transfer; On the other hand, the mesoporous hierarchical networks can buffer the volume change, accommodate or alleviate the strain during charge-discharge process, thus enhancing the conductivity and stability of the electrodes. Benefiting from the mesoporous design, the interconnected ZnMn{sub 2}O{sub 4} delivers a stable capacity (812 mA h g{sup −1} at 100 mA g{sup −1} after 200 cycles), and maintains a high capacity of 516 mA h g{sup −1} even at 2 A g{sup −1} after 200 cycles, which shows that the nanostructured ZnMn{sub 2}O{sub 4} has excellent cycling stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

α-Fe2O3/SnO2 heterostructure composites: A high stability anode for lithium-ion battery

Highlights: • α-Fe{sub 2}O{sub 3}/SnO{sub 2} composites decorated with SnO{sub 2} nanocrystals were successfully synthesized. • The composites show high stability lithium storage performance as anode material. • The SnO{sub 2} layer serves as an inactive matrix for Fe{sub 2}O{sub 3} particles to avoid agglomeration and keep structural integrity. - Abstract: α-Fe{sub 2}O{sub 3} microoval structure decorated with SnO{sub 2} nanocrystals are fabricated by hydro-thermal process. The composite heterostructure has a uniform size of 310 nm in length and 110 nm in width, and SnO{sub 2} shell thickness is ∼10 nm. The SnO{sub 2} shell acts as a conductive layer to offer fast pathways for transport of electrons and ions. What is more, the SnO{sub 2} layer serves as an inactive matrix for α-Fe{sub 2}O{sub 3} particles, avoiding agglomeration and keeping structural integrity. Benefiting from the smart design, the hierarchical α-Fe{sub 2}O{sub 3}/SnO{sub 2} composite as anode exhibits a higher specific capacity and a better rate performance than those of pristine α-Fe{sub 2}O{sub 3} structures. The stability electrochemical performance of the hierarchical composite can be put down to the core-shell architecture, which improves the conductivity and stability of the electrodes. The heterostructure design in our work provides a possible approach to synthesis high stability materials for electrochemical energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NATIONAL IMPACT OF ANSI/ASHRAE/IES STANDARD 90.1-2016

ANSI/ASHRAE/IES Standard 90.1 is the U.S. national commercial building model energy code and it has a significant impact on many programs and policies that impact energy savings across the United States and the world. Determining the energy savings from the latest edition of Standard 90.1 relative to previous editions is critical for beyond code programs and for others setting energy performance targets. Pacific Northwest National Laboratory developed prototype building models to determine the energy savings from 90.1-2016 standard. This paper presents the rigorous modeling and development process that PNNL has established and its applications. In addition, the energy savings results of Standard 90.1-2016 are described.

Standard 90.1-2016, energy efficency, energy codes↗

Coated particle fuel: Historical perspectives and current progress

We report that coated particle fuel concepts date back some 60 years, and have evolved significantly from the relatively primitive pyrocarbon-coated kernels envisioned by the first pioneers. Improvements in particle design, coating layer properties, and kernel composition have produced the modern tristructural isotropic (TRISO) particle, capable of low statistical coating failure fractions and good fission product retention under extremely severe conditions, including temperatures of 1600 °C for hundreds of hours. The fuel constitutes one of the key enabling technologies for high-temperature gas-cooled reactors, allowing coolant outlet temperatures approaching 1000 °C and contributing to enhanced reactor safety due to the hardiness of the particles. TRISO fuel development has taken place in a number of countries worldwide, and several fuel qualification programs are currently in progress. Here, we discuss the unique history of particle fuel development and some key technology advances, concluding with some of the latest progress in UO 2 and UCO TRISO fuel qualification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

National Impact of ANSI/ASHRAE/IES Standard 90.1-2016

ANSI/ASHRAE/IES Standard 90.1 is the U.S. national commercial building model energy code and it has a significant impact on many programs and policies that impact energy savings across the United States and the world. Determining the energy savings from the latest edition of Standard 90.1 relative to previous editions is critical for beyond code programs and for others setting energy performance targets. Pacific Northwest National Laboratory developed prototype building models to determine the energy savings from 90.1-2016 standard. This paper presents the rigorous modeling and development process that PNNL has established and its applications. In addition, the energy savings results of Standard 90.1-2016 are described.

Liu, Bing↗

Cav-1 promotes atherosclerosis by activating JNK-associated signaling

Highlights: • Cav-1 expression is up-regulated in endothelial cells of atherosclerotic lesions. • Cav-1 deficiency inhibits HFD-induced inflammation in ApoE–/– mice. • Cav-1 deletion is able to suppress HFD-induced oxidative stress and dyslipidemia in ApoE–/– mice. • JNK signaling is involved in Cav-1-modulated atherosclerosis. The objective of the study is to calculate the role and underlying the molecular mechanisms of caveolin-1 (Cav-1) in atherosclerosis (AS). Cav-1 was mainly expressed in the endothelial cells of atherosclerotic lesions in both human patients and apolipoprotein E deficient (ApoE{sup –/–}) mice. Cav-1 deficiency (Cav-1{sup –/–}) attenuated high-fat diet (HFD)-induced atherosclerotic lesions in ApoE{sup –/–} mice, supported by the reduced aortic plaques. Cav-1{sup –/–} reduced the macrophage content and decreased the release of inflammation-related cytokines or chemokine in serum or abdominal aortas, accompanied with the inactivation of inhibitor κB kinase κ (IKKβ)/p65/IκBα signaling pathway. Also, the activity of mitogen-activated protein kinases 7/c-Jun-N-terminal kinase (MKK7/JNK) signaling was decreased by Cav-1{sup –/–}. In addition, oxidative stress induced by HFD in ApoE{sup –/–} mice was alleviated by Cav-1{sup –/–}. In response to HFD, Cav-1{sup –/–} markedly reduced triglyceride (TG), total cholesterol (TC), low-density lipoprotein-cholesterol (LDLC) and very low-density lipoprotein-cholesterol (VLDLC) in serum of HFD-fed ApoE{sup –/–} mice, whereas enhanced high-density lipoprotein-cholesterol (HDLC) contents. Consistent with these findings, haematoxylin and eosin (H&E) and Oil Red O staining showed fewer lipid droplets in the liver of Cav-1-deficient mice. Further, real time-quantitative PCR (RT-qPCR) analysis indicated that Cav-1{sup –/–} alleviated dyslipidemia both in liver and abdominal aortas of ApoE{sup −/-} mice fed with HFD. Cav-1 inhibition-induced attenuation of inflammatory response, oxidative stress and dyslipidemia were confirmed in vitro using mouse vascular smooth muscle cells (VSMCs) treated with ox-LDL. Surprisingly, the processes regulated by Cav-1-knockdown could be abolished through promoting JNK activation in ox-LDL-treated VSMCs. In conclusion, Cav-1 expression could promote HFD-induced AS in a JNK-dependent manner.

60 APPLIED LIFE SCIENCES↗

Let the Good Times Roll – Energy Code Savings into the Future

Long term benefits of energy codes provide valuable information for setting policies, for state adoption, and in evaluating the cost-benefits of energy codes. Pacific Northwest National Laboratory (PNNL) evaluated the long-term impacts associated with energy codes in residential and commercial buildings from 2010 through 2040. The analysis developed and implemented a new methodology that relied on available data and market trends. The study was heavily vetted with key stakeholders including, DOE, Regional Energy Efficiency Organization network (REEOs), ACEEE and others. Several complex streams of information were combined in the analysis, including results from hundreds of simulation models, codes field study data from DOE, floor space data from EIA's Annual Energy Outlook, and data on projected technology improvements from DOE’s Technology Roadmaps. This paper describes the methodology used for the assessment and presents the energy and economic impacts in terms of site energy savings, consumer energy cost savings, and reduced CO2 emissions at the state level and at aggregated national level. The assessment concluded that model energy codes will save $126 billion for consumers on their utility bills, reduce carbon emissions by 841 metric-million tons, and save 12.82 quads of primary energy on a cumulative basis from 2010 through 2040. The results are being used by DOE to underline their role in improving building energy efficiency, by REEOs and states for promoting state code adoption, and by ACEEE and others to perform their own analyses related to energy codes.

buidling energy codes, Impacts of Energy Codes↗

Understanding the U.S. Commercial Building Stock: Building Envelope and HVAC Systems Characteristics Using 2012 CBECS Data Analysis

The U.S. Department of Energy (DOE) and its national labs developed a series of commercial reference building models in 2007. Over the past decade, the Pacific Northwest National Laboratory, in support of DOE’s Building Energy Codes Program, expanded these prototype building models to comply with multiple editions of national model codes and standards, including both ASHRAE Standard 90.1 and International Energy Conservation Code. The prototype building models established a credible foundation to develop new requirements in building codes and standards, track progress of codes and standards, and evaluate the energy saving potential of new technologies or systems in the commercial building sector. The 2003 Commercial Building Energy Consumption Survey (CBECS) was the primary data source used to develop the original models. Given the recent release of 2012 CBECS data, this paper characterizes the most representative design choices for building envelope and HVAC systems in recently-constructed commercial buildings. The results from this analysis provide actionable insight for future commercial building research in reflection of recent construction practices.

energy efficiency, building energy codes, CBECS, b↗

Structural and molecular dynamics studies of a C1-oxidizing lytic polysaccharide monooxygenase from Heterobasidion irregulare reveal amino acids important for substrate recognition

Lytic polysaccharide monooxygenases (LPMOs) are a group of recently discovered enzymes that play important roles in the decomposition of recalcitrant polysaccharides. Here, we report the biochemical, structural, and computational characterization of an LPMO from the white-rot fungus Heterobasidion irregulare (HiLPMO9B). This enzyme oxidizes cellulose at the C1 carbon of glycosidic linkages. The crystal structure of HiLPMO9B was determined at 2.1 A resolution using X-ray crystallography. Unlike the majority of the currently available C1-specific LPMO structures, the HiLPMO9B structure contains an extended L2 loop, connecting ..beta..-strands ..beta..2 and ..beta..3 of the ..beta..-sandwich structure. Molecular dynamics (MD) simulations suggest roles for both aromatic and acidic residues in the substrate binding of HiLPMO9B, with the main contribution from the residues located on the extended region of the L2 loop (Tyr20) and the LC loop (Asp205, Tyr207, and Glu210). Asp205 and Glu210 were found to be involved in the hydrogen bonding with the hydroxyl group of the C6 carbon of glucose moieties directly or via a water molecule. Two different binding orientations were observed over the course of the MD simulations. In each orientation, the active-site copper of this LPMO preferentially skewed toward the pyranose C1 of the glycosidic linkage over the targeted glycosidic bond. This study provides additional insight into cellulose binding by C1-specific LPMOs, giving a molecular-level picture of active site substrate interactions.

09 BIOMASS FUELS↗

Synergistic effect of hierarchical SnO2 nanorods/Fe2O3 hexahedrons with enhanced performance as lithium ion battery anodes

Highlights: • SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites were fabricated by a two-step hydrothermal method. • SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites show high capacity and excellent cycling stability. • The enhanced performances benefit from the synergistic effect of SnO{sub 2} and Fe{sub 2}O{sub 3}. • The reduced Fe nanoparticles facilitate the fully conversion reaction of SnO{sub 2}. - Abstract: Hierarchical SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites composed of SnO{sub 2} nanorods and Fe{sub 2}O{sub 3} hexahedrons are successfully prepared by a two-step hydrothermal method. The lithium ion batteries (LIBs) based on as-synthesized products are fabricated to investigate their electrochemical performance. As an anode material for LIBs, SnO{sub 2}-Fe{sub 2}O{sub 3} nanocomposites deliver a high capacity of 1022 mAh g{sup −1} at 100 mA g{sup −1} after 100 cycles. The cycling stability and rate performance of the nanocomposites are significantly improved. The enhanced performances benefit from the synergistic effect of SnO{sub 2} nanorods and Fe{sub 2}O{sub 3} hexahedrons. The iron (Fe) nanoparticles reduced from Fe{sub 2}O{sub 3} not only facilitate the conversion reaction of SnO{sub 2}, resulting in the high capacity, but also increase the conductivity of the material. In addition, SnO{sub 2} serves as a matrix to protect Fe{sub 2}O{sub 3} from agglomeration, and the hierarchical structure effectively buffers volume changes, thus enhancing the cycling life of LIBs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Paracrine signaling by VEGF-C promotes non-small cell lung cancer cell metastasis via recruitment of tumor-associated macrophages

Highlights: • VEGF-C exerts a novel function that induces macrophage migration and recruitment. • Tumoral VEGF-C induces macrophage migration via VEGFR/Src/p38 axis in macrophages. • Paracrine VEGF-C-mediated macrophage infiltration promotes NSCLC cell metastasis. High expression of tumoral vascular endothelial growth factor C (VEGF-C) is correlated with clinical non-small cell lung cancer (NSCLC) metastasis and patient survival. Nevertheless, the comprehensive mechanisms accounting for VEGF-C-mediated cancer progression remain largely unclear. The present study found that VEGF-C expression was upregulated in various NSCLC cell lines. By utilizing transwell migration assay, we found that both recombinant VEGF-C protein and overexpression of VEGF-C in NSCLC cells (A549 and H441 cell lines) could efficiently enhance RAW264.7 cell (murine macrophages) migration. However, recombinant VEGF-C treatment had no effects on both CD206 (an M2 macrophage marker) expression and M1/M2 cytokine profiles of macrophages. Furthermore, additional treatment of recombinant Flt-4/Fc, the specific VEGFR-3 inhibitor or the specific VEGFR-2 inhibitor significantly suppressed macrophage migration compared with A549-CM (conditioned medium) or H441-CM alone group, confirming that NSCLC cells-derived VEGF-C is sufficient to promote macrophage migration. Interestingly, VEGF-C could stimulate the Src/p38 signaling via VEGFR-2/3 axis in macrophages, and inhibition of Src/p38 signaling obviously reversed the enhancement effect of VEGF-C on macrophage migration. Finally, the functional importance of macrophage infiltration induced by tumoral VEGF-C in promoting metastasis was established in a mouse model. In conclusion, our results highlight a novel function of tumoral VEGF-C that paracrinely induces macrophage recruitment, and resultantly promotes NSCLC cell metastasis. Therefore, VEGF-C/VEGFR-2/3 axis may be a promising microenvironmental target against progression of NSCLC.

60 APPLIED LIFE SCIENCES↗

Energy Savings Analysis of the Proposed NYStretch-Energy Code 2018

This study was conducted by the Pacific Northwest National Laboratory (PNNL) in support of the stretch energy code development led by the New York State Energy Research and Development Authority (NYSERDA). In 2017 NYSERDA developed its 2016 Stretch Code Supplement to the 2016 New York State Energy Conservation Construction Code (hereinafter referred to as “NYStretch-Energy”). NYStretch-Energy is intended as a model energy code for statewide voluntary adoption that anticipates other code advancements culminating in the goal of a statewide Net Zero Energy Code by 2028. Since then, NYSERDA continues to develop the NYStretch-Energy Code 2018 edition. To support the effort, PNNL conducted energy simulation analysis to quantify the energy savings of proposed commercial provisions of the NYStretch-Energy Code (2018) in New York. The focus of this project is the 20% improvement over existing commercial model energy codes. A key requirement of the proposed stretch code is that it be ‘adoptable’ as an energy code, meaning that it must align with current code scope and limitations, and primarily impact building components that are currently regulated by local building departments. It is largely limited to prescriptive measures, which are what most building departments and design projects are most familiar with. This report describes a set of energy-efficiency measures (EEMs) that demonstrate 20% energy savings over ANSI/ASHRAE/IES Standard 90.1-2013 (ASHRAE 2013) across a broad range of commercial building types and all three climate zones in New York. In collaboration with New Building Institute, the EEMs were developed from national model codes and standards, high-performance building codes and standards, regional energy codes, and measures being proposed as part of the on-going code development process. PNNL analyzed these measures using whole building energy models for selected prototype commercial buildings and multifamily buildings representing buildings in New York. Section 2 of this report describes the analysis methodology, including the building types and construction area weights update for this analysis, the baseline, and the method to conduct the energy saving analysis. Section 3 provides detailed specifications of the EEMs and bundles. Section 4 summarizes the results of individual EEMs and EEM bundles by building type, energy end-use and climate zone. Appendix A documents detailed descriptions of the selected prototype buildings. Appendix B provides energy end-use breakdown results by building type for both the baseline code and stretch code in all climate zones.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Osteopontin promotes collagen I synthesis in hepatic stellate cells by miRNA-129-5p inhibition

Activation of hepatic stellate cells (HSCs) is an essential event in the initiation and progression of liver fibrosis. HSCs are believed to be the major source of collagen-producing myofibroblasts in fibrotic livers. A key feature in the pathogenesis of liver fibrosis is fibrillar Collagen I (Col 1) deposition. Osteopontin (OPN), an extracellular matrix (ECM) cytokine expressed in HSCs, could drive fibrogenesis by modulating the HSC pro-fibrogenic phenotype and Col 1 expression. Here, we aimed to investigate the molecular mechanism of OPN regulating the activation of HSCs. Our results showed that hepatic expression of OPN was increased in patients with liver fibrosis. In addition, hepatic OPN was positively correlated with Col 1 and α-SMA. Recombinant OPN (rOPN) upregulated Col 1 and α-SMA expression in LX-2 cells. However, OPN knockdown downregulated Col 1 expression. The 3′-UTR of the collagen 1 (Col 1) was identified to bind miR-129-5p. Transfection of miR-129-5p mimic in HSC resulted in a marked reduction of Col 1 expression. Conversely, a decrease in miR-129-5p in HSCs transfected by anti-sense miR-129-5p (AS-miR-129-5p) caused Col 1 upregulation. Furthermore, luciferase reporter assay showed that miR-129-5p directly target the 3′-UTR of Col1α1 mRNA via repressing its post-transcriptional activities. Finally, miR-129-5p level was decreased in fibrotic liver of human, and reduced by rOPN treatment. In contrast, miR-129-5p was induced in HSCs transfected by OPN siRNA. These data suggested that OPN induces Col 1 expression via suppression of miR-129-5p in HSCs.

60 APPLIED LIFE SCIENCES↗

Lattice dynamics of ultrathin FeSe films on SrTiO 3

Charge transfer and electron-phonon coupling (EPC) are proposed to be two important constituents associated with enhanced superconductivity in the single unit cell FeSe films on oxide surfaces. Using high-resolution electron energy loss spectroscopy combined with first-principles calculations, we have explored here the lattice dynamics of ultrathin FeSe films grown on ${\mathrm{SrTiO}}_{3}$. We show that, despite the significant effect from the substrate on the electronic structure and superconductivity of the system, the FeSe phonons in the films are unaffected. The energy dispersion and linewidth associated with the Fe- and Se-derived vibrational modes are thickness and temperature independent. Theoretical calculations indicate the crucial role of antiferromagnetic correlation in FeSe to reproduce the experimental phonon dispersion. Importantly, the only detectable change due to the growth of FeSe films is the broadening of the Fuchs-Kliewer (F-K) phonons associated with the lattice vibrations of ${\mathrm{SrTiO}}_{3}$(001) substrate. Finally, if EPC plays any role in the enhancement of film superconductivity, it must be the interfacial coupling between the electrons in FeSe film and the F-K phonons from substrate rather than the phonons of FeSe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

City Reach Code Technical Support Document

This report describes and analyzes a set of energy efficiency measures that will save 20% energy over ASHRAE Standard 90.1-2013. The measures will be used to formulate a Reach Code for cities aiming to go beyond national model energy codes. A coalition of U.S. cities together with other stakeholders wanted to facilitate the development of voluntary guidelines and standards that can be implemented in stages at the city level to improve building energy efficiency. The coalition's efforts are being supported by the U.S. Department of Energy via Pacific Northwest National Laboratory (PNNL) and in collaboration with the New Buildings Institute.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗