Search NASA⌕ Search

Engineering topics

Liu, Bo

Publications and source records attributed to Liu, Bo.

153 records · Page 9

V-shaped resonators for addition of broad-area laser diode arrays

A system and method for addition of broad-area semiconductor laser diode arrays are described. The system can include an array of laser diodes, a V-shaped external cavity, and grating systems to provide feedback for phase-locking of the laser diode array. A V-shaped mirror used to couple the laser diode emissions along two optical paths can be a V-shaped prism mirror, a V-shaped stepped mirror or include multiple V-shaped micro-mirrors. The V-shaped external cavity can be a ring cavity. The system can include an external injection laser to further improve coherence and phase-locking.

47 OTHER INSTRUMENTATION↗

Migration of point defects and a defect pair in zinc oxide using the dimer method

The migration mechanism and the minimum energy path of vacancies, interstitials and an interstitial-vacancy pair in zinc oxide have been studied by the dimer method. The in-plane and out-of-plane migrations of zinc and oxygen vacancies are found to be anisotropic. The kick-out mechanism is energetically preferred to zinc and oxygen interstitials that can easily migrate through the ZnO crystal lattice. In addition, the migration process of an interstitial-vacancy pair as a complex of an octahedral oxygen interstitial and a zinc vacancy is dominated by an oxygen interstitial/zinc vacancy successive migration. The energy barriers indicate that the existence of oxygen interstitial in the defect pair can promote the mobility of zinc vacancy, whereas the migration of oxygen interstitial is slowed down due to the presence of zinc vacancy. In the end, we show a possible migration path of the interstitial-vacancy pair that can be dissociated through a set of displacement movements.

Computer simulations↗

Discovery and Characterization of Non-ATP Site Inhibitors of the Mitogen Activated Protein (MAP) Kinases

Inhibition of protein kinases has validated therapeutic utility for cancer, with at least seven kinase inhibitor drugs on the market. Protein kinase inhibition also has significant potential for a variety of other diseases, including diabetes, pain, cognition, and chronic inflammatory and immunologic diseases. However, as the vast majority of current approaches to kinase inhibition target the highly conserved ATP-binding site, the use of kinase inhibitors in treating nononcology diseases may require great selectivity for the target kinase. As protein kinases are signal transducers that are involved in binding to a variety of other proteins, targeting alternative, less conserved sites on the protein may provide an avenue for greater selectivity. Here we report an affinity-based, high-throughput screening technique that allows nonbiased interrogation of small molecule libraries for binding to all exposed sites on a protein surface. This approach was used to screen both the c-Jun N-terminal protein kinase Jnk-1 (involved in insulin signaling) and p38{alpha} (involved in the formation of TNF{alpha} and other cytokines). In addition to canonical ATP-site ligands, compounds were identified that bind to novel allosteric sites. The nature, biological relevance, and mode of binding of these ligands were extensively characterized using two-dimensional {sup 1}H/{sup 13}C NMR spectroscopy, protein X-ray crystallography, surface plasmon resonance, and direct enzymatic activity and activation cascade assays. Jnk-1 and p38{alpha} both belong to the MAP kinase family, and the allosteric ligands for both targets bind similarly on a ledge of the protein surface exposed by the MAP insertion present in the CMGC family of protein kinases and distant from the active site. Medicinal chemistry studies resulted in an improved Jnk-1 ligand able to increase adiponectin secretion in human adipocytes and increase insulin-induced protein kinase PKB phosphorylation in human hepatocytes, in similar fashion to Jnk-1 siRNA and to rosiglitazone treatment. Together, the data suggest that these new ligand series bind to a novel, allosteric, and physiologically relevant site and therefore represent a unique approach to identify kinase inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

Spectral Linewidth Narrowing and Tunable Two-Color Laser Operation of Two Diode Laser Arrays

We propose and implement a common external cavity to narrow spectral linewidth of two broad-area laser diode arrays (LDAs) and align their center wavelengths. The locked center wavelength of two LDAs can be tuned in the range of {approx}10 nm by tuning the tilted angle of the diffraction grating. The output beams of two LDAs are spatially overlapped through the polarization beam splitter of the common external cavity, and the total output power equals the power of two LDAs. The center wavelength of each LDA can be independently tuned by shifting the corresponding fast-axis collimation lens. As a result, the high-power two-color LDA operation is demonstrated with the tunable wavelength difference of up to 2 nm ({approx}1 THz).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Structural Transition Behavior of CdSe/ZnS Core/shell Quantum Dots under High Pressure

The structural phase transition of CdSe/ZnS core/shell quantum dots (QDs) has been studied by in situ angle-dispersive X-ray diffraction under high pressure up to 53.6?GPa. The CdSe core transforms from wurtzite to rock-salt structure near 6.3?GPa and then to Cmcm or distorted Cmcm structure probably occurs at 45.1?GPa which has not been observed in CdSe nanomaterials before. The critical pressure from wurtzite to rock-salt and the bulk modulus of rock-salt phase are much higher than those for bulky and uncapped nanoparticle CdSe. The released sample can be kept in rock-salt phase for a certain time, verified by photoluminescence (PL) spectra, quite different from the reversible transition for pure CdSe. A reasonable interpretation of the experimental phenomena is given by comparing the bulk modulus of the core and shell and studying the stress sate of the core after decompression. Our study suggests that capping a hard shell is an effective approach to quench the high pressure phase of nanomaterial with a reversible phase transition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Foam, a promising vehicle to deliver nanoparticles for vadose zone remediation

Foam delivery of remedial amendments for in-situ immobilization of deep vadose zone contaminants can overcome the intrinsic problems associated with solution-based delivery, such as preferential flow and contaminant mobilization. In this work, the feasibility of using foam to deliver nanoparticles in unsaturated porous media was investigated. Carboxyl-modified polystyrene latex microspheres were used as surrogates for nanoparticles of remediation purposes. Foams generated from the solutions of six commonly available surfactants all had excellent abilities to carry the microspheres. The presence of the microspheres did not reduce the stabilities of the foams. When microsphere-laden foam was injected through the unsaturated columns, the fractions of microspheres exiting the column were much higher than that when the microsphere water suspensions were injected through the columns. The enhanced microsphere transport implies that foam delivery could significantly increase the radius of influence of injected nanoparticles of remediation purposes. Reduced tension at air-water interfaces by the surfactant and increased driving forces imparted on the microspheres at the interfaces by the flowing foam bubbles may have both contributed to the enhanced transport. Preliminary tests also demonstrated that foam can carry significant fractions of zero valent iron nanoparticles at concentrations relevant to field remediation conditions (up to 5.3 g L-1). As such, this study demonstrates that surfactant foam is potentially a promising vehicle to deliver nanoparticles for vadose zone remediation.

54 ENVIRONMENTAL SCIENCES↗

Crystal growth and characterization of CuI single crystals by solvent evaporation technique

Cuprous iodide (CuI) crystals are grown by slow evaporation technique in three different solvents. Large CuI single crystals with dimensions of 7.5 mm x 5 mm x 3 mm are obtained in pure acetonitrile solvent at 40 {sup o}C. The as-grown crystals are analyzed by X-ray diffraction, energy-dispersive X-ray analysis, differential scanning calorimetry, current-voltage characteristic and photoluminescence spectrum. The results show that the CuI crystal has the zinc-blende structure with no secondary phase. The elemental Cu/I ratio is 1.09:1. The melting point of the crystal is 875 K and two phase transitions occur from room temperature to its melting point. The electrical conductivity of CuI platelet crystal is in the range of 1.11-2.38 {Omega}{sup -1} cm{sup -1}. Under ultraviolet excitation, the CuI crystals exhibit three emission bands with peak positions at 426, 529 and 671 nm. The nature of the luminescence is discussed.

36 MATERIALS SCIENCE↗

Coherent Beam Combining of High Power Broad-Area Laser Diode Array with a Closed-V-shape External Talbot Cavity

We have coherently combined a high-power broad-area laser diode array by using a feedback loop closed off-axis external Talbot cavity. The off-axis feedback from two gratings provides transverse-mode control of broad-area lasers. The Talbot configuration of the external cavity implements diffractive coupling among laser diodes. Feedback from two gratings increases external cavity quality factor and spectrum selection capability. As a result, spatial coherence was improved and spectral linewidth was narrowed down. The high visibility of the far-field profile indicates that high spatial coherence was achieved. We also observed symmetric far-field profiles indicating that laser array was phase locked to in-phase and out-of-phase super-modes, respectively. Transition between these super-modes was observed by tuning one grating's tilted angle.

42 ENGINEERING↗

Coherent Beam Combining of High-Power Broad-Area Laser Diode Array in CW and Pulsed Modes

We present experimental results on coherent beam combining from large arrays of high power broad-area semiconductor lasers. Our laser array consists of 47 high-power anti-reflection coated broad-area semiconductor lasers and each laser emitter is capable of emitting 1.8 W when uncoated with a maximum array output power of 80W. The total available power from the AR coated array is approximately 40W. By using an external V-shape cavity design, we experimentally demonstrated a coherently combined beam at the output power of {approx}13 W with the 0.07 nm FWHM spectrum linewidth that is limited by the sensitivity of the optical spectrum analyzer. We also discuss coherent beam combining of high power broad area laser diode array in current driver pulse mode operation.

42 ENGINEERING↗