Search NASA⌕ Search

Engineering topics

Liu, Chen

Publications and source records attributed to Liu, Chen.

At least 19 records

Reconfigurable spin current transmission and magnon–magnon coupling in hybrid ferrimagnetic insulators

Coherent spin waves possess immense potential in wave-based information computation, storage, and transmission with high fidelity and ultra-low energy consumption. However, despite their seminal importance for magnonic devices, there is a paucity of both structural prototypes and theoretical frameworks that regulate the spin current transmission and magnon hybridization mediated by coherent spin waves. Here, we demonstrate reconfigurable coherent spin current transmission, as well as magnon–magnon coupling, in a hybrid ferrimagnetic heterostructure comprising epitaxial Gd 3 Fe 5 O 12 and Y 3 Fe 5 O 12 insulators. By adjusting the compensated moment in Gd 3 Fe 5 O 12 , magnon–magnon coupling was achieved and engineered with pronounced anticrossings between two Kittel modes, accompanied by divergent dissipative coupling approaching the magnetic compensation temperature of Gd 3 Fe 5 O 12 (T M,GdIG ), which were modeled by coherent spin pumping. Remarkably, we further identified, both experimentally and theoretically, a drastic variation in the coherent spin wave-mediated spin current across T M,GdIG , which manifested as a strong dependence on the relative alignment of magnetic moments. Our findings provide significant fundamental insight into the reconfiguration of coherent spin waves and offer a new route towards constructing artificial magnonic architectures.

42 ENGINEERING↗

Sulfur-Enriched Nanoporous Carbon: A Novel Approach to CO 2 Adsorption

Carbon dioxide (CO 2 ) intake plays a vital role in sustaining the environmental balance by influencing global carbon dynamics and climatic stability. This work addresses the production of sulfur-doped porous nanocarbons (SDCs) as prospective sorbents for CO 2 capture. SDCs were fabricated by utilizing coconut shell as a carbon precursor and potassium persulfate as both a chemical activating agent and a sulfur dopant. The incorporation of sulfur functionalities into carbon matrices creates structural variability and active sites, boosting CO 2 absorption capabilities. Sulfur's peculiar electrical structure allows greater intermolecular interactions with CO 2 , enhancing adsorption affinities. According to the experimental data, the CO 2 uptake was best measured as 3.37 mmol/g at 0(degrees)C and 1 bar and 2.56 mmol/g at 25 C-degrees and 1 bar. The results show that the higher porosity of SDC materials adds to a large amplification in the CO 2 uptake capability. The work underlines the delicate interaction between sulfur doping, morphological porosity, and surface reactivity in enhancing the effectiveness of CO 2 sequestration. SDC materials hold considerable promise in tackling the present ecological concerns and developing CO 2 collection techniques. The suggested single-step synthesis technique described here provides a sustainable and environmentally friendly method for synthesizing SDCs for carbon capture applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable Skyrmionic Phase Transition between Néel Skyrmions and Bloch Skyrmionic Bubbles in van der Waals Ferromagnet Fe 3-δ GeTe 2

The van der Waals (vdW) ferromagnet Fe 3-δ GeTe 2 has garnered significant research interest as a platform for skyrmionic spin configurations, that is, skyrmions and skyrmionic bubbles. However, despite extensive efforts, the origin of the Dzyaloshinskii–Moriya interaction (DMI) in Fe 3-δ GeTe 2 remains elusive, making it challenging to acquire these skyrmionic phases in a controlled manner. In this study, it is demonstrated that the Fe content in Fe 3-δ GeTe 2 has a profound effect on the crystal structure, DMI, and skyrmionic phase. For the first time, a marked increase in Fe atom displacement with decreasing Fe content is observed, transforming the original centrosymmetric crystal structure into a non-centrosymmetric symmetry, leading to a considerable DMI. Additionally, by varying the Fe content and sample thickness, a controllable transition between Néel-type skyrmions and Bloch-type skyrmionic bubbles is achieved, governed by a delicate interplay between dipole–dipole interaction and the DMI. The findings offer novel insights into the variable skyrmionic phases in Fe 3-δ GeTe 2 and provide the impetus for developing vdW ferromagnet-based spintronic devices.

2D ferromagnet Fe3-δGeTe2↗

Ordered porous RGO/SnO 2 thin films for ultrasensitive humidity detection

In this work, ordered porous thin films of reduced graphene oxide and tin oxide (rGO/SnO 2 ) were synthesized by a polystyrene sphere monolayer colloidal crystal template method, and their gas-sensing properties were systematically studied. The formed amorphous SnO 2 and partially reduced graphene oxide were analyzed using several complementary material characterization techniques. Further, the results show that the incorporation of rGO significantly improved the humidity sensitivity and the electrical conductivity of the sensor relative to the pristine SnO 2 thin film. Fast response time and excellent selectivity towards humidity were also achieved for the rGO/SnO 2 composite film. The long-term stability of the rGO/SnO 2 sensor was confirmed by comparing its performance to a commercial humidity sensor. The enhanced sensor performance is attributed to the synergistic effects of the incorporation of rGO and the ordered porous structure of the composite film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonvolatile Magnetoelectric Switching of Magnetic Tunnel Junctions with Dipole Interaction

The magnetoelectric effect is technologically appealing because of its ability to manipulate magnetism using an electric field rather than magnetic field or current, thus providing a promising solution for the development of energy-efficient spintronics. Although 180° magnetization switching is vital to spintronic devices, the achievement of 180° magnetization switching via magnetoelectric coupling is still a fundamental challenge. Here, in this work, voltage-driven full resistance switching of a magnetic tunnel junction (MTJ) with dipole interaction on a ferroelectric substrate through switchable parallel/antiparallel magnetization alignment is demonstrated. Parallel magnetization alignment along the y direction is obtained under a bias magnetic field. By rotating the magnetic easy axis via strain-mediated magnetoelectric coupling, the parallel magnetizations in the MTJ reorient to the x axis with opposite paths because of dipole interaction, thus resulting in antiparallel alignment. Moreover, this voltage switching of MTJs is nonvolatile owing to variations in dipole interaction and can be well understood via phase field simulations. The results provide an avenue to realize electrical switching of MTJs and are significant for exploring energy-efficient spintronic devices.

36 MATERIALS SCIENCE↗

Synthesis and characterization of UiO-66-NH 2 incorporated graphene aerogel composites and their utilization for absorption of organic liquids

This work details the synthesis, materials characterization and absorption capacity of graphene aerogel (GA) loaded with UiO-66-NH 2 metal organic framework (MOF). Throughout the study, a series of density-tunable MOF/GA composites were synthesized by adjusting the MOF/graphene oxide (GO) mass ratio of the precursors before hydrothermal reduction and subsequent critical point drying to achieve MOF-x%/GA composites, with x, ranging from 0 to 100, denoting the weight percent ratio of MOF to GO in the starting solution. Scanning electron microscopy (SEM) images and Barrett-Joyner-Halenda (BJH) pore size calculations supported that MOF loading enlarged the macroporous (>50 nm) structure of the GA framework but had no influence on the mesoporous (2–50 nm) structure of GA. The degree of MOF loading first decreased and then increased the density of resulting composites, exhibiting a minimum for the 10–30% samples. Such behavior with respect to MOF loading has not been reported previously. MOF-x%/GA samples were further investigated for absorption capacity using various organic liquids. MOF-30%/GA proved to be the best absorbent sample for all solvents tested, achieving the highest capacity for chloroform at 147.0 ± 10.0 mg/mg. The behavior is attributed to the structural changes induced by the MOF incorporation as well as the interactions between the organic molecules and the MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High‐Efficiency Magnon‐Mediated Magnetization Switching in All‐Oxide Heterostructures with Perpendicular Magnetic Anisotropy

Abstract The search for efficient approaches to realize local switching of magnetic moments in spintronic devices has attracted extensive attention. One of the most promising approaches is the electrical manipulation of magnetization through electron‐mediated spin torque. However, the Joule heat generated via electron motion unavoidably causes substantial energy dissipation and potential damage to spintronic devices. Here, all‐oxide heterostructures of SrRuO 3 /NiO/SrIrO 3 are epitaxially grown on SrTiO 3 single‐crystal substrates following the order of the ferromagnetic transition metal oxide SrRuO 3 with perpendicular magnetic anisotropy, insulating and antiferromagnetic NiO, and metallic transition metal oxide SrIrO 3 with strong spin–orbit coupling. It is demonstrated that instead of the electron spin torques, the magnon torques present in the antiferromagnetic NiO layer can directly manipulate the perpendicular magnetization of the ferromagnetic layer. This magnon mechanism may significantly reduce the electron motion‐related energy dissipation from electron‐mediated spin currents. Interestingly, the threshold current density to generate a sufficient magnon current to manipulate the magnetization is one order of magnitude smaller than that in conventional metallic systems. These findings suggest a route for developing highly efficient all‐oxide spintronic devices operated by magnon current.

Zheng, Dongxing↗

Sierpinski Structure and Electronic Topology in Bi Thin Films on InSb(111)B Surfaces

Deposition of Bi on InSb(111)B reveals a striking Sierpinski-triangle (ST)-like structure in Bi thin films. Such a fractal geometric topology is further shown to turn off the intrinsic electronic topology in a thin film. Relaxation of a huge misfit strain of about 30 to 40% between Bi adlayer and substrate is revealed to drive the ST-like island formation. A Frenkel-Kontrova model is developed to illustrate the enhanced strain relief in the ST islands offsetting the additional step energy cost. Besides a sufficiently large tensile strain, forming ST-like structures also requires larger adlayer-substrate and intra-adlayer elastic stiffnesses, and weaker intra-adlayer interatomic interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Electrochemical Corrosion Behavior of Plasma Electrolytic Oxidation Coatings Fabricated on Aluminum in Silicate Electrolyte

Plasma electrolytic oxidation (PEO) coatings were fabricated on the aluminum in silicate electrolyte. Microstructures and elemental compositions of these PEO coatings were examined by scanning electron microscopy (SEM) equipped with an energy-dispersive x-ray spectroscopy (EDS). Corrosion resistances of the coated samples were evaluated using the measurements of open-circuit potential (OCP), repetitive polarization and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The results indicated that the PEO coatings not only act as a physical shield limiting the penetration of corrosive solution, but also establish an anodic location with high concentration of H{sup +} ions and other product ions as pitting corrosion begins. With the development of pitting corrosion, the accumulation of corrosion products inside the pits and pores of the coatings decreases the corrosion process effectively.

36 MATERIALS SCIENCE↗

Surgical Resection for Metastatic Tumors in the Pancreas: A Single-Center Experience and Systematic Review

Background: Metastatic lesion to the pancreas accounts for approximately 2% of pancreatic neoplasms. There is no prospective, randomized or case-controlled study evaluating the role of pancreatic metastasectomy. Methods: The PubMed, EMBASE, and Cochrane Library electronic databases were searched for studies published between January 1, 2001 and December 31, 2017. Studies with five or more patients who received pancreatic metastasectomy and data from our institution (29 patients) were included. The Kaplan–Meier method was used for survival analysis. Results: A total of 414 patients from 20 institutions who underwent pancreatic resections were included. Of the reported 31 kinds of primary neoplasms, renal-cell carcinoma (RCC) comprised the most (54.3%). At the time of diagnosis, although 40.3% patients were asymptomatic, abdominal pain (34.8%) and jaundice (20.6%) were relatively common. As for surgical type, pancreatoduodenectomy, total pancreatectomy, distal pancreatectomy, and enucleation took up 37.9%, 11.4%, 43.5%, and 7.2% respectively. The mortality and morbidity rates were 1.4% and 48.3% respectively. Patients with symptoms at the time of diagnosis had significantly shorter survival compared with asymptomatic patients (p = 0.017). Those with RCC as primary tumor had significantly longer survival compared with non-RCC patients (p < 0.001). Positive margin also predicts worse prognosis (p = 0.035). Conclusions: Pancreatic metastasectomy is safe and associated with acceptable short- and intermediate-term results. In the conditions of RCC as the primary tumor, being asymptomatic, or negative resection margin, a better prognosis after resection can be achieved.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

6-Amino-3-methylpyrimidinones as Potent, Selective, and Orally Efficacious SHP2 Inhibitors

Protein tyrosine phosphatase SHP2 is an oncoprotein associated with cancer as well as a potential immune modulator because of its role in the programmed cell death PD-L1/PD-1 pathway. In the preceding manuscript, we described the optimization of a fused, bicyclic screening hit for potency, selectivity, and physicochemical properties in order to further expand the chemical diversity of allosteric SHP2 inhibitors. In this manuscript, we describe the further expansion of our approach, morphing the fused, bicyclic system into a novel monocyclic pyrimidinone scaffold through our understanding of SAR and use of structure-based design. These studies led to the identification of SHP394 (1), an orally efficacious inhibitor of SHP2, with high lipophilic efficiency, improved potency, and enhanced pharmacokinetic properties. We also report other pyrimidinone analogues with favorable pharmacokinetic and potency profiles. Overall, this work improves upon our previously described allosteric inhibitors and exemplifies and extends the range of permissible chemical templates that inhibit SHP2 via the allosteric mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ANGPTL2 deletion inhibits osteoclast generation by modulating NF-κB/MAPKs/Cyclin pathways

Highlights: • ANGPTL2 is associated with the osteoclast development. • Inhibition of ANGPTL2 reduces the proliferation of osteoclast precursors. • ANGPTL2 deficiency alleviates ovariectomy (OVX)-induced bone loss. Osteoclasts are multinucleated cells essential for bone-resorption. Successful repair of bone defciencies still remains a great challenge worldwide. The signaling factor angiopoietin-like protein 2 (ANGPTL2), one of eight ANGPTL proteins, functions in maintenance of tissue homeostasis partly through regulating inflammation. In the study, ANGPTL2 expression was promoted during osteoclast development and that suppressing ANGPTL2 alleviated osteoclast production regulated by macrophage colony-stimulating factor (M-CSF) and receptor activator of NF-κB ligand (RANKL). The results suggested that ANGPTL2 knockdown inhibited M-CSF-caused proliferation of osteoclast precursor cells. Further, ANGPTL2 silence reduced nuclear factor of activated T cell c 1 (NFATC1) and NFATC4 expressions in M-CSF-treated cells, along with decreased Runx2, OPN and Colla1. Moreover, silencing ANGPTL2 down-regulated M-CSF-promoted expressions of pro-inflammatory cytokines, including tumor necrosis factor-α (TNF-α), interleukin (IL)-1β, IL-6, and chemoattractant protein-1 (CCL-2). Consistently, ANGPTL2 knockdown reduced M-CSF-enhanced activation of IKKα, IκBα and nuclear factor κB (NF-κB) and mitogen-activated protein kinases (MAPKs) (p38 MAPK, ERK1/2 MAPK and JNK MAPK). Additionally, knockdown of ANGPTL2 inhibited the induction of Cyclin D1, Cyclin D2 and Cyclin E1 due to M-CSF exposure. In vivo, we confirmed that ANGPTL2 knockout (KO) mice were protected against osteoporosis induced by ovariectomy (OVX), as proved by the improved bone loss and bone mineral density (BMD). Decreased expression of NFATCs was also observed in OVX-induced mice in the absence of ANGPTL2. Elevated release of pro-inflammatory cytokines was abrogated by ANGPTL2 knockout in femoral heads of mice with OVX operation, accompanied with a significant reduction of phosphorylated NF-κB and MAPKs signaling pathways. And down-regulated expression of Cyclin D1, Cyclin D2 and Cyclin E1 was observed in OVX-operated mice with ANGPTL2 knockout. Therefore, our study indicated that ANGPTL2 played an essential role in osteoclast generation through regulating the proliferation and inflammation of osteoclast lineage cells, providing new insights into the therapeutic strategy to alleviate bone loss.

60 APPLIED LIFE SCIENCES↗

Role of Active Phase in Fischer–Tropsch Synthesis: Experimental Evidence of CO Activation over Single-Phase Cobalt Catalysts

In order to understand the role of Co catalysts with different phases on Fischer-Tropsch synthesis, single-phase face-centered cubic (fcc) and hexagonal close-packed (hcp) Co were synthesized via a two-step approach, involving the formation of single-phase CoO materials followed by reduction in H2. The physicochemical properties of Co catalysts were thoroughly characterized by XRD, SEM, TEM, TPR and H2 chemisorption. It was found that hcp-Co exhibits higher activity on hydrocarbon formation than fcc-Co in Fischer-Tropsch synthesis. For both catalysts, CO dissociation was suggested as the rate determining step, on which hcp-Co presents ca. 40 kJ mol-1 lower activation energy than fcc-Co, in agreement of reported computational study. As a result, hcp-Co is concluded as a preferable phase for rational catalyst design.

Lyu, Shuai↗