Search NASA⌕ Search

Engineering topics

Liu, Fei

Publications and source records attributed to Liu, Fei.

At least 37 records · Page 2

Self-assembly of Janus Dumbbell Nanocrystals and Their Enhanced Surface Plasmon Resonance

Self-assembly is a critical process that can greatly expand the existing structures and lead to new functionality of nanoparticle systems. Multicomponent superstructures self-assembled from nanocrystals have shown promise as multifunctional materials for various applications. Despite recent progress in assembly of homogeneous nanocrystals, synthesis and self-assembly of Janus nanocrystals with contrasting surface chemistry remains a significant challenge. Herein, we designed a novel Janus nanocrystal platform to control the self-assembly of nanoparticles in aqueous solutions by balancing the hydrophobic and hydrophilic moieties. A series of superstructures have been assembled by systematically varying the Janus balance and assembly conditions. Janus Au–Fe 3 O 4 dumbbell nanocrystals (<20 nm) were synthesized with the hydrophobic ligands coated on the Au lobe and negatively charged hydrophilic ligands coated on the Fe 3 O 4 lobe. We systematically fine-tune the lobe size ratio, surface coating, external conditions, and even additional growth of Au nanocrystal domains on the Au lobe of dumbbell nanoparticles (Au–Au–Fe 3 O 4 ) to harvest self-assembly structures including clusters, chains, vesicles, and capsules. It was discovered that in all these assemblies the hydrophobic Au lobes preferred to stay together. In addition, these superstructures clearly demonstrated different levels of enhanced surface plasmon resonance that is directly correlated with the Au coupling in the assembly structure. The strong interparticle plasmonic coupling displayed a red-shift in surface plasmon resonance, with larger structures formed by Au–Au–Fe 3 O 4 assembly extending into the near-infrared region. Self-assembly of Janus dumbbell nanocrystals can also be reversible under different pH values. In conclusion, the biphasic Janus dumbbell nanocrystals offer a platform for studying the novel interparticle coupling and open up opportunities in applications including sensing, disease diagnoses, and therapy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Copolyesters developed from bio‐based 2,5‐furandicarboxylic acid: Synthesis, sequence distribution, mechanical, and barrier properties of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s

ABSTRACT A series of poly(propylene‐ co ‐1,4‐cyclohexanedimethylene 2,5‐furandicarboxylate)s (PPCFs) with different compositions were synthesized from bio‐based aromatic monomer 2,5‐furandicarboxylic acid and 1,3‐propanediol (PDO), along with 1,4‐cyclohexanedimethylene (CHDM). The chemical structure, composition, and sequence distribution of PPCFs were determined by nuclear magnetic resonance ( 1 H NMR and 13 C NMR). Results showed that the compositions of copolyesters depended on the feed molar ratio of PDO and CHDM, and all the obtained PPCFs copolyesters had triad component in a random sequential structure. With the addition of CHDM, the gas barrier properties of poly(propylene 2,5‐furandicarboxylate) (PPF) deteriorated. However, when the content of CHDM reached 79%, PPCF79 still showed the CO 2 and O 2 barrier improvement factor of 4.5 and 3.25, respectively, which were better than those of poly(ethylene naphthalate), a well‐known polymer with barrier property. Besides, PPCF79 showed good performance on tensile modulus, tensile strength, elongation at break, and the crystallization enthalpy was improved from 3.2 J g −1 for PPF to 30.7 J g −1 for PPCF79. It has the potential to serve as a promising bio‐based polymer with excellent comprehensive performance. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136 , 47291.

Jia, Zhen↗

A New Global Anthropogenic SO2 Emission Inventory for the Last Decade: A Mosaic of Satellite-Derived and Bottom-Up Emissions

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor have been used to detect emissions from large point sources. Emissions from over 400 sources have been quantified individually based on OMI observations, accounting for about a half of total reported anthropogenic SO2 emissions. Here we report a newly developed emission inventory, OMI-HTAP, by combining these OMI-based emission estimates and the conventional bottom-up inventory, HTAP, for smaller sources that OMI is not able to detect. OMI-HTAP includes emissions from OMI-detected sources that are not captured in previous leading bottom-up inventories, enabling more accurate emission estimates for regions with such missing sources. In addition, our approach offers the possibility of rapid updates to emissions from large point sources that can be detected by satellites. Our methodology applied to OMI-HTAP can also be used to merge improved satellite-derived estimates with other multi-year bottom-up inventories, which may further improve the accuracy of the emission trends. OMI-HTAP SO2 emissions estimates for Persian Gulf, Mexico, and Russia are 59%, 65%, and 56% larger than HTAP estimates, respectively, in year 2010. We have evaluated the OMI-HTAP inventory by performing simulations with the Goddard Earth Observing System version 5 (GEOS-5) model. The GEOS-5 simulated SO2 concentrations driven by both HTAP and OMI-HTAP were compared against in situ measurements. We focus for the validation on year 2010 for which HTAP is most valid and for which a relatively large number of in situ measurements are available. Results show that the OMI-HTAP inventory improves the agreement between the model and observations, in particular over the US, with the normalized mean bias decreasing from 0.41 (HTAP) to -0.03 (OMI-HTAP) for year 2010. Simulations with the OMI-HTAP inventory capture the worldwide major trends of large anthropogenic SO2 emissions that are observed with OMI. Correlation coefficients of the observed and modelled surface SO2 in 2014 increase from 0.16 (HTAP) to 0.59 (OMI-HTAP) and the normalized mean bias dropped from 0.29 (HTAP) to 0.05 (OMI-HTAP), when we updated 2010 HTAP emissions with 2014 OMI-HTAP emissions in the model.

Sulfur dioxide (SO2)↗

High glucose downregulates the effects of autophagy on osteoclastogenesis via the AMPK/mTOR/ULK1 pathway

Highlights: • High glucose downregulates AMPK/mTOR/ULK pathway in osteoclasts. • Inhibition of AMPK/mTOR/ULK pathway suppresses autophagy in glucose-mediated osteoclastogenesis. • Autophagy has a positive correlation with glucose-mediated osteoclastogenesis. Diabetes is a chronic disease that disrupts the balance between bone formation and bone desorption, which can lead to osteoporosis, increasing the risk of fracture. However, compared with osteoblasts, the biological effects of hyperglycemia on osteoclastogenesis remain to be elucidated. Therefore, we investigated the impact of glucose at different concentrations (5.5, 10.5, 15.5, 20.5, 25.5, and 30.5 mM) on osteoclastogenesis using RAW264.7 cells. Cell proliferation was measured with the cell counting kit-8 assay, and osteoclastogenesis was detected with tartrate-resistant acid phosphatase staining and bone resorption assays, as well as protein cathepsin K expression. Compound C, the AMP-activated protein kinase (AMPK) pathway inhibitor, was used to examine the relationship between the AMPK/mTOR/ULK1 signaling pathway and autophagy in osteoclasts. Autophagy was evaluated with transmission electron microscopy and immunofluorescence microscopy and associated proteins were detected with western blotting. The pharmacological autophagic reagents bafilomycin A1, 3-methyladenine, and rapamycin were used to determine the effect of autophagy on osteoclastogenesis. Our results showed that glucose negatively affected osteoclast formation and function but did not affect the proliferation of RAW264.7 cells. Suppression of the AMPK/mTOR/ULK1 signaling axis decreased autophagy in glucose-mediated osteoclast. Furthermore, High levels of glucose decreased autophagy level in osteoclasts. Additionally, interfering with autophagy affected osteoclast formation and function. These findings clarify the mechanisms underlying the effects of glucose-mediated osteoclastogenesis and will help identify novel therapeutic strategies for the protection of skeletal health in diabetic osteoporosis.

60 APPLIED LIFE SCIENCES↗

Top-Down NOx Emissions of European Cities Based on the Downwind Plume of Modelled and Space-Borne Tropospheric NO2 Columns

Top-down estimates of surface NOX emissions were derived for 23 European cities based on the downwind plume decay of tropospheric nitrogen dioxide (NO2) columns from the LOTOS-EUROS (Long Term Ozone Simulation-European Ozone Simulation) chemistry transport model (CTM) and from Ozone Monitoring Instrument (OMI) satellite retrievals, averaged for the summertime period (April-September) during 2013. Here we show that the top-down NOX emissions derived from LOTOS-EUROS for European urban areas agree well with the bottom-up NOX emissions from the MACC-III inventory data (R(exp 2) = 0.88) driving the CTM demonstrating the potential of this method. OMI top-down NOX emissions over the 23 European cities are generally lower compared with the MACC-III emissions and their correlation is slightly lower (R(exp 2) = 0.79). The uncertainty on the derived NO2 lifetimes and NOX emissions are on average ~55% for OMI and ~63% for LOTOS-EUROS data. The downwind NO2 plume method applied on both LOTOS-EUROS and OMI tropospheric NO2 columns allows to estimate NOX emissions from urban areas, demonstrating that this is a useful method for real-time updates of urban NOX emissions with reasonable accuracy.

NOx emissions↗

Magnetic Domain Evolution in Sintered Nd–Fe–B Magnet during Magnetization Process

In the present study, the magnetic domains and their evolution during magnetization process have been investigated for sintered Nd–Fe–B permanent magnets with Kerr microscopy. Observation of the magnetic domain evolution process during magnetization process shows that some domain walls were pinned at the grain boundary area under magnetic field up to 5 kOe. It is suggested that magnetic interaction between individual Nd{sub 2}Fe{sub 14}B grains contacting to each other leads to appearance of small closed domains near the grain boundary area, which are responsible for the pinning effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CRL4BRBBP7 targets HUWE1 for ubiquitination and proteasomal degradation

The E3 ubiquitin ligase HUWE1/Mule/ARF-BP1 plays an important role in diverse biological processes including DNA damage repair and apoptosis. Our previous study has shown that in response to DNA damage HUWE1 was downregulated in CUL4B-mediated ubiquitination and subsequent proteasomal degradation, and CUL4B-mediated regulation of HUWE1 was important for cell survival upon DNA damage. CUL4B is a core component of the CUL4B Ring ligase complexes containing ROC1, DDB1 and a DDB1-Cullin Associated Factors (DCAFs), the latter of which are DDB1-binding WD40 adaptors critical for substrate recognition and recruitment. However, the identity of DCAF in CRL4B that mediates degradation of HUWE1 remains elusive. Here we report that RBBP7 is the DCAF in the CRL4B complex bridging the DDB1-CUL4B-ROC1 to HUWE1. Loading of HUWE1 to the E3 ubiquitin ligase complex resulted in its polyubiquitination, and consequently its proteasome mediated degradation. Overexpression of RBBP7 promoted HUWE1 protein degradation, while depletion of RBBP7 stabilized HUWE1, and hence accelerated the degradation of MCL-1 and BRCA1, two substrates of HUWE1 that are critical in apoptosis and DNA damage repair. Taken together, these data reveal CRL4B{sup RBBP7} is the E3 ligase responsible for the proteasomal degradation of HUWE1, and further provide a potential strategy for cancer therapy by targeting HUWE1 and the CUL4B E3 ligase complex.

60 APPLIED LIFE SCIENCES↗

Evaluation of Modeling NO2 Concentrations Driven by Satellite-Derived and Bottom-Up Emission Inventories Using In-Situ Measurements Over China

Chemical transport models together with emission inventories are widely used to simulate NO2 concentrations over China, but validation of the simulations with in situ measurements has been extremely limited. Here we use ground measurements obtained from the air quality monitoring network recently developed by the Ministry of Environmental Protection of China to validate modeling surface NO2 concentrations from the CHIMERE regional chemical transport model driven by the satellite-derived DECSO and the bottom-up MIX emission inventories. We applied a correction factor to the observations to account for the interferences of other oxidized nitrogen compounds (NOz), based on the modeled ratio of NO2 to NOz. The model accurately reproduces the spatial variability in NO2 from in situ measurements, with a spatial correlation coefficient of over 0.7 for simulations based on both inventories. A negative and positive bias is found for the simulation with the DECSO (slopeD0.74 and 0.64 for the daily mean and daytime only) and the MIX (slopeD1.3 and 1.1) inventories, respectively, suggesting an underestimation and overestimation of NOx emissions from corresponding inventories. The bias between observed and modeled concentrations is reduced, with the slope dropping from 1.3 to 1.0 when the spatial distribution of NOx emissions in the DECSO inventory is applied as the spatial proxy for the MIX inventory, which suggests an improvement of the distribution of emissions between urban and suburban or rural areas in the DECSO inventory compared to that used in the bottom-up inventory. A rough estimate indicates that the observed concentrations, from sites predominantly placed in the populated urban areas, may be 10-40% higher than the corresponding model grid cell mean. This reduces the estimate of the negative bias of the DECSO-based simulation to the range of -30 to 0% on average and more firmly establishes that the MIX inventory is biased high over major cities. The performance of the model is comparable over seasons, with a slightly worse spatial correlation in summer due to the difficulties in resolving the more active NOx photochemistry and larger concentration gradients in summer by the model. In addition, the model well captures the daytime diurnal cycle but shows more significant disagreement between simulations and measurements during nighttime, which likely produces a positive model bias of about 15% in the daily mean concentrations. This is most likely related to the uncertainty in vertical mixing in the model at night.

NO2 modelling↗

Crystal structure and dielectric properties of a new Na2O-Nd2O3-CeO2 ceramic system at microwave frequencies

Highlights: • A large amount of Na evaporation can make τ{sub f} more negative in present ceramics. • Na-excess evaporation results in the formation of Ce{sub 1-x}Nd{sub x}O{sub 2-x/2} solid solution. • Ce{sub 1-x}Nd{sub x}O{sub 2-x/2} (x = 0.25 and 0.5) solid solutions belong to the same fluorite-type. - Abstract: Na{sub 2}O-Nd{sub 2}O{sub 3}-CeO{sub 2} ceramic systems of the form Na{sub 3x−1}Nd{sub 1−x}CeO{sub 3} (x = 0.4, 0.5, and 0.6) were prepared via a solid-state reaction method. X-ray diffraction analyses indicated that the samples with x = 0.4, 0.6 and those with x = 0.5 formed Nd{sub 0.25}Ce{sub 0.75}O{sub 1.875} and Nd{sub 0.5}Ce{sub 0.5}O{sub 1.75} solid solutions, respectively, which resulted from a large degree of Na{sup +} ion evaporation. Both the Nd{sub 0.25}Ce{sub 0.75}O{sub 1.875} and Nd{sub 0.5}Ce{sub 0.5}O{sub 1.75} phases belonged to the same cubic structure with an Fm-3m (225) space group. Additionally, the microstructures, sintering behaviors, and microwave dielectric properties were considered to be strongly related to the Na content in the Na{sub 3x−1}Nd{sub 1−x}CeO{sub 3} ceramics. A relatively large degree of Na{sup +} ion evaporation could increase the negative temperature coefficient of the resonant frequency (τ{sub f}) for these ceramic systems. Moreover, after sintering at 1380 °C for 2 h, the x = 0.6 specimen possessed a low permittivity (ε{sub r}) of approximately 9.13, a moderate quality factor (Q × f) of approximately 23,800 GHz (at 9.14 GHz) and a negative τ{sub f} value of approximately −61.7 ppm/°C. As a result, it could be a promising microwave dielectric material for achieving a near-zero τ{sub f} value by solidifying one or more microwave dielectric ceramics with a high positive τ{sub f} value.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Targeted emission reductions from global super-polluting power plant units

There are more than 30,000 biomass- and fossil-fuel-burning power plants now operating worldwide, reflecting a tremendously diverse infrastructure, which ranges in capacity from less than a megawatt to more than a gigawatt. In 2010, 68.7% of electricity generated globally came from these power plants, compared with 64.2% in 1990. Although the electricity generated by this infrastructure is vital to economic activity worldwide, it also produces more CO2 and air pollutant emissions than infrastructure from any other industrial sector. Here, we assess fuel- and region-specific opportunities for reducing undesirable air pollutant emissions using a newly developed emission dataset at the level of individual generating units. For example, we find that retiring or installing emission control technologies on units representing 0.8% of the global coal-fired power plant capacity could reduce levels of PM2.5 emissions by 7.7–14.2%. In India and China, retiring coal-fired plants representing 1.8% and 0.8% of total capacity can reduce total PM2.5 emissions from coal-fired plants by 13.2% and 16.0%, respectively. Our results therefore suggest that policies targeting a relatively small number of ‘super-polluting’ units could substantially reduce pollutant emissions and thus the related impacts on both human health and global climate.

Tong, Dan↗

The Microstructure and Pitting Resistance of Weld Joints of 2205 Duplex Stainless Steel

2205 duplex stainless steel (DSS) was welded by submerged arc welding. The effects of both heat input and groove type on the ferrite/austenite ratio and elemental diffusion of weld joints were investigated. The relationships among welding joint preparation, ferrite/austenite ratio, elemental diffusion, and pitting corrosion resistance of weld joints were analyzed. When the Ni content of the weld wire deposit was at minimum 2–4% higher than that of 2205 DSS base metal, the desired ratio of ferrite/austenite and elemental partitioning between the austenite and ferrite phases were obtained. While the pitting sensitivity of weld metal was higher than that of base metal, the self-healing capability of the passive film of weld metal was better than that of the base metal when a single V-type groove was used. Furthermore, the heat input should be carefully controlled since pitting corrosion occurred readily in the coarse-grained heat-affected zone near the fusion line of welded joints.

36 MATERIALS SCIENCE↗

Construction of EGFR peptide gefitinib/quantum dots long circulating polymeric liposomes for treatment and detection of nasopharyngeal carcinoma

Gefitinib/Quantum dots (QDs) loaded peptide long circulating liposomes (G/QDs-P-LCPL) were successfully prepared for treatment and detection by fluorescence labeling for nasopharyngeal carcinoma. Gefitinib was found to have marked inhibition which is dose- and time-dependent. Hoechst 33258 florescence staining and wound-healing assay indicated that as G/QDs-P-LCPL concentration increased, HONE1 staining cells decreased, while the amount of nucleus pyknosis and karyorrhexis grew. Florescence tracing result shows that the drug mainly distributed through tumors. G-P-LCPL target the HONE1 cells and significantly increase the drug uptake efficiency so as to improve the cells inhibit rate compared with the non-targeting group. The EGFR peptide LCPL are potentially useful for drug and fluorescence labeled delivery applications. - Highlights: • Gefitinib/QDs-EGFR peptide liposomes (G/QDs-P-LCPL) were prepared for nasopharyngeal carcinoma treatment and detection. • G-P-LCPL can effectively increase the drug uptake efficiency so as to improve the cells inhibit rate compared with LCPL. • The EGFR peptide LCPL are potentially useful for drug and fluorescence labeled delivery applications.

60 APPLIED LIFE SCIENCES↗

MIX: a mosaic Asian anthropogenic emission inventory under the international collaboration framework of the MICS-Asia and HTAP

Here, the MIX inventory is developed for the years 2008 and 2010 to support the Model Inter-Comparison Study for Asia (MICS-Asia) and the Task Force on Hemispheric Transport of Air Pollution (TF HTAP) by a mosaic of up-to-date regional emission inventories. Emissions are estimated for all major anthropogenic sources in 29 countries and regions in Asia. We conducted detailed comparisons of different regional emission inventories and incorporated the best available ones for each region into the mosaic inventory at a uniform spatial and temporal resolution. Emissions are aggregated to five anthropogenic sectors: power, industry, residential, transportation, and agriculture. We estimate the total Asian emissions of 10 species in 2010 as follows: 51.3 Tg SO 2 , 52.1 Tg NO x , 336.6 Tg CO, 67.0 Tg NMVOC (non-methane volatile organic compounds), 28.8 Tg NH 3 , 31.7 Tg PM 10 , 22.7 Tg PM 2.5 , 3.5 Tg BC, 8.3 Tg OC, and 17.3 Pg CO 2 . Emissions from China and India dominate the emissions of Asia for most of the species. We also estimated Asian emissions in 2006 using the same methodology of MIX. The relative change rates of Asian emissions for the period of 2006–2010 are estimated as follows: –8.1 % for SO 2 , +19.2 % for NO x , +3.9 % for CO, +15.5 % for NMVOC, +1.7 % for NH 3 , –3.4 % for PM 10 , –1.6 % for PM 2.5 , +5.5 % for BC, +1.8 % for OC, and +19.9 % for CO 2 . Model-ready speciated NMVOC emissions for SAPRC-99 and CB05 mechanisms were developed following a profile-assignment approach.

54 ENVIRONMENTAL SCIENCES↗