Search NASA⌕ Search

Engineering topics

Liu, Feng

Publications and source records attributed to Liu, Feng.

At least 19 records

Properties of the QCD matter: review of selected results from the relativistic heavy ion collider beam energy scan (RHIC BES) program

In the paper, we discuss the development of the multigap resistive plate chamber time-of-flight (TOF) technology and the production of the solenoidal tracker at RHIC (STAR) TOF detector in China at the beginning of the twenty-first century. Subsequently, recent experimental results from the first beam energy scan program (BES-I) at the Relativistic Heavy Ion Collider (RHIC) pertaining to measurements of collectivity, chirality, criticality, global polarization, strangeness, heavy flavor, dilepton and light nuclei productions are reviewed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Hard Ferromagnetism in FePS 3 Induced by Non‐Magnetic Molecular Intercalation

Abstract Manipulating the magnetic ground states of 2D magnets is a focal point of recent research efforts. Various methods have demonstrated efficacy in modulating the magnetic properties inherent to van der Waals (vdW) magnetic systems. Herein, the emergence of robust anisotropic ferromagnetism within antiferromagnetic FePS 3 is unveiled via intercalation with non‐magnetic pyridinium ions. A one‐step ion exchange reaction facilitates the formation of energetically favorable B‐phase and metastable P‐phase. Notably, both B‐ and P‐phases manifest hard ferromagnetic behavior, featuring substantial unsaturated coercive fields (>7 T) and high Curie temperatures (72–87 K). First‐principles calculations elucidate the pivotal role of electron transfer from pyridinium ions to FePS 3 in engineering magnetic exchange interactions. Calculated effective spin Hamiltonian corroborates the observed hard ferromagnetism in intercalated FePS 3 . This study offers crucial insights into hard magnetism in intercalated vdW materials, thereby presenting promising avenues for 2D vdW magnet‐based magnetic devices.

Ou, Yunbo↗

Transport–Friendly Microstructure in SSC–MEA: Unveiling the SSC Ionomer–Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

The significant role of the cathodic binder in modulating mass transport within the catalyst layer (CL) of fuel cells is essential for optimizing cell performance. This investigation focuses on enhancing the membrane electrode assembly (MEA) through the utilization of a short-side-chain perfluoro-sulfonic acid (SSC-PFSA) ionomer as the cathode binder, referred to as SSC-MEA. This study meticulously visualizes the distinctive interpenetrating networks of ionomers and catalysts, and explicitly clarifies the triple-phase interface, unveiling the transport-friendly microstructure and transport mechanisms inherent in SSC-MEA. The SSC-MEA exhibits advantageous microstructural features, including a better-connected ionomer network and well-organized hierarchical porous structure, culminating in superior mass transfer properties. Relative to the MEA bonded by long-side-chain perfluoro-sulfonic acid (LSC-PFSA) ionomer, noted as LSC-MEA, SSC-MEA exhibits a notable peak power density (1.23 W cm –2 ), efficient O 2 transport, and remarkable proton conductivity (65% improvement) at 65 °C and 70% relativity humidity (RH). These findings establish crucial insights into the intricate morphology-transport-performance relationship in the CL, thereby providing strategic guidance for developing highly efficient MEA.

25 ENERGY STORAGE↗

Large-scale 2D heterostructures from hydrogen-bonded organic frameworks and graphene with distinct Dirac and flat bands

The current strategies for building 2D organic-inorganic heterojunctions involve mostly wet-chemistry processes or exfoliation and transfer, leading to interface contaminations, poor crystallizing, or limited size. Here we show a bottom-up procedure to fabricate 2D large-scale heterostructure with clean interface and highly-crystalline sheets. As a prototypical example, a well-ordered hydrogen-bonded organic framework is self-assembled on the highly-oriented-pyrolytic-graphite substrate. The organic framework adopts a honeycomb lattice with faulted/unfaulted halves in a unit cell, resemble to molecular “graphene”. Interestingly, the topmost layer of substrate is self-lifted by organic framework via strong interlayer coupling, to form effectively a floating organic framework/graphene heterostructure. The individual layer of heterostructure inherits its intrinsic property, exhibiting distinct Dirac bands of graphene and narrow bands of organic framework. Our results demonstrate a promising approach to fabricate 2D organic-inorganic heterostructure with large-scale uniformity and highly-crystalline via the self-lifting effect, which is generally applicable to most of van der Waals materials.

36 MATERIALS SCIENCE↗

Achieving 19% efficiency in non-fused ring electron acceptor solar cells via solubility control of donor and acceptor crystallization

Non-fused ring electron acceptors (NFREAs) potentially have lower synthetic costs than their fused counterparts. However, the low backbone planarity and the presence of bulky substituents adversely affect the crystallinity of NFREAs, impeding charge transport and the formation of bicontinuous morphology in organic solar cells. Here we show that a binary solvent system can individually control the crystallization and phase separation of the donor polymer (for example, D18) and the NFREA (for example, 2BTh-2F-C 2 ). We select solvents such as chloroform and o -xylene that evaporate at different temperatures and rates and have different solubility for D18. Upon evaporation of chloroform, D18 starts to assemble into fibrils. Then, the evaporation of o-xylene induces the rapid formation of a fibril network that phase segregates 2BTh-2F-C 2 into pure domains and leads to a bicontinuous morphology. In conclusion, the well-defined interpenetrating network morphology affords an efficiency of 19.02% on small-area cells and 17.28% on 1 cm 2 devices.

14 SOLAR ENERGY↗

Molecular Precision Engineering for Efficient Binary Organic Photovoltaics through Energy Level and Fibrillar Structure Modulation

Adjusting the energy levels and fibrillar morphology is paramount to enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). In the present study, an increase in the open-circuit voltage (VOC) is facilitated through the elongation of the alkyl chain within AQx (namely AQx-8), aiming to decrease the free volume ratio (FVR). This reduction in FVR attenuates electron-phonon coupling, thereby augmenting emission efficiency and diminishing the non-radiative energy loss (ΔEnr). To further refine the energy levels and morphological characteristics, the external undecyl chain of AQx-8 is substituted with a shorter carbon chain and cyclohexane noted for its considerable steric hindrance (AQx-H). Additionally, this alteration significantly mitigates intermolecular aggregation, expands the bandgap, and elevates the lowest unoccupied molecular orbital (LUMO) energy level, culminating in an elevated VOC of 0.923 V in devices based on AQx-H. Morphological analysis reveals that blends based on AQx-H exhibit an enhanced multi-length-scale fibrillar structure, which is conducive to exciton dissociation and charge transport, thereby contributing to a high fill factor (FF) nearing 80%. Consequently, this study reports one of the highest binary PCEs documented, standing at 19.5% (with certification at 19.0%).

14 SOLAR ENERGY↗

Osmosensor-mediated control of Ca 2+ spiking in pollen germination

Higher plants survive terrestrial water deficiency and fluctuation by arresting cellular activities (dehydration) and resuscitating processes (rehydration). However, how plants monitor water availability during rehydration is unknown. Although increases in hypo-osmolarity-induced cytosolic Ca 2+ concentration (HOSCA) have long been postulated to be the mechanism for sensing hypo-osmolarity in rehydration, the molecular basis remains unknown. Because osmolarity triggers membrane tension and the osmosensing specificity of osmosensing channels can only be determined in vivo, these channels have been classified as a subtype of mechanosensors. Here we identify bona fide cell surface hypo-osmosensors in Arabidopsis and find that pollen Ca 2+ spiking is controlled directly by water through these hypo-osmosensors—that is, Ca 2+ spiking is the second messenger for water status. We developed a functional expression screen in Escherichia coli for hypo-osmosensitive channels and identified OSCA2.1, a member of the hyperosmolarity-gated calcium-permeable channel (OSCA) family of proteins. We screened single and high-order OSCA mutants, and observed that the osca2.1/osca2.2 double-knockout mutant was impaired in pollen germination and HOSCA. OSCA2.1 and OSCA2.2 function as hypo-osmosensitive Ca 2+ -permeable channels in planta and in HEK293 cells. Decreasing osmolarity of the medium enhanced pollen Ca 2+ oscillations, which were mediated by OSCA2.1 and OSCA2.2 and required for germination. OSCA2.1 and OSCA2.2 convert extracellular water status into Ca 2+ spiking in pollen and may serve as essential hypo-osmosensors for tracking rehydration in plants.

59 BASIC BIOLOGICAL SCIENCES↗

Quantum Dots on Silicon-on-Insulator (QD/SOI): Nanoscale Strain and Band Structure Engineering (Final Report)

As the project titles indicate, the work focused on Group IV nanomembranes (NMs), thin functional layers, and interfaces, all with one or more dimensions at the nanoscale. The primary focus was discovery driven fundamental science. This approach led to surprising new, unexpected results that ended up being patentable and creating commercial value, but that were also high-impact science. Our effort divided into several overlapping thrusts: 1) strain engineering of NMs, via both lattice strain and externally applied strain, 2) interfaces between crystalline semiconductor NMs and other 2D sheets that are stacked or grown on each other, and 3) charge transport (electronics and optoelectronics) in thin layers, sheets, and surfaces. We accomplish these goals via 1) fabrication of new or higher-quality materials using NM approaches, 2) growth of new combinations, or 3) transfer and stacking to create new composites. The range of materials included combinations of Si, Ge, graphene, and several III-V compounds. The work has foundations in both nano- and mesoscale science.

36 MATERIALS SCIENCE↗

Anomalous bilayer quantum Hall effect

In parallel to the condensed-matter realization of quantum Hall (Chern insulators), quantum spin Hall (topological insulators), and fractional quantum Hall (fractional Chern insulators) effects, we propose that bilayer flat band (FB) lattices with one FB in each layer constitute solid-state analogs of bilayer quantum Hall (BQH) system, leading to anomalous BQH effect without a magnetic field. By exact diagonalization of a bilayer kagome lattice Hamiltonian, as a prototypical example, we demonstrate the stabilization of excitonic condensate Halperin's (1,1,1) state at the total filling v T = 1 of the two FBs. Furthermore, by tuning the interlayer tunneling and distance between the kagome layers at v T = 2/3, we show phase transitions among Halperin's (3,3,0), spin-singlet (1,1,2), and particle-hole conjugate of Laughlin's 1/3 states, as previously observed in conventional BQH systems. Furthermore, our work opens a new direction in the field of FB physics by demonstrating bilayer FB materials as an attractive avenue for realizing exotic anomalous BQH states including non-Abelian anyons.

74 ATOMIC AND MOLECULAR PHYSICS↗

Rational Materials and Structure Design for Improving the Performance and Durability of High Temperature Proton Exchange Membranes (HT-PEMs)

Hydrogen energy as the next-generation clean energy carrier has attracted the attention of both academic and industrial fields. A key limit in the current stage is the operation temperature of hydrogen fuel cells, which lies in the slow development of high-temperature and high-efficiency proton exchange membranes. Currently, much research effort has been devoted to this field, and very innovative material systems have been developed. The authors think it is the right time to make a short summary of the high-temperature proton exchange membranes (HT-PEMs), the fundamentals, and developments, which can help the researchers to clearly and efficiently gain the key information. In this paper, the development of key materials and optimization strategies, the degradation mechanism and possible solutions, and the most common morphology characterization techniques as well as correlations between morphology and overall properties have been systematically summarized.

08 HYDROGEN↗

Topological quantum devices: a review

The introduction of the concept of topology into condensed matter physics has greatly deepened our fundamental understanding of transport properties of electrons as well as all other forms of quasi particles in solid materials. It has also fostered a paradigm shift from conventional electronic/optoelectronic devices to novel quantum devices based on topology-enabled quantum device functionalities that transfer energy and information with unprecedented precision, robustness, and efficiency. In this article, the recent research progress in topological quantum devices is reviewed. We first outline the topological spintronic devices underlined by the spin-momentum locking property of topology. We then highlight the topological electronic devices based on quantized electron and dissipationless spin conductivity protected by topology. Finally, we discuss quantum optoelectronic devices with topology-redefined photoexcitation and emission. The field of topological quantum devices is only in its infancy, we envision many significant advances in the near future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

All-polymer organic solar cells with nano-to-micron hierarchical morphology and large light receiving angle

Distributed photovoltaics in living environment harvest the sunlight in different incident angles throughout the day. The development of planer solar cells with large light-receiving angle can reduce the requirements in installation form factor and is therefore urgently required. Here, thin film organic photovoltaics with nano-sized phase separation integrated in micro-sized surface topology is demonstrated as an ideal solution to proposed applications. All-polymer solar cells, by means of a newly developed sequential processing, show large magnitude hierarchical morphology with facilitated exciton-to-carrier conversion. The nano fibrilar donor-acceptor network and micron-scale optical field trapping structure in combination contributes to an efficiency of 19.06% (certified 18.59%), which is the highest value to date for all-polymer solar cells. Furthermore, the micron-sized surface topology also contributes to a large light-receiving angle. A 30% improvement of power gain is achieved for the hierarchical morphology comparing to the flat-morphology devices. These inspiring results show that all-polymer solar cell with hierarchical features are particularly suitable for the commercial applications of distributed photovoltaics due to its low installation requirement.

14 SOLAR ENERGY↗

Realization of flat bands by lattice intercalation in kagome metals

Recently there has been intense interest in kagome metals, which are expected to host flat bands (FBs). However, the observed “FBs” are not flat over the whole two-dimensional Brillouin zone and overlap strongly with other bands. In fact, the FB does not truly exist in a default d-orbital kagome lattice, and the conditions for its existence in kagome metals are unknown. Here, based on tight-binding model analyses of the interplay between orbital and lattice symmetry, we establish such conditions. Additionally, we show that for a single d-orbital kagome lattice assuming large crystal field splitting (CFS), only the d z 2 orbital gives rise to a FB, while d xy , d x 2 -y 2 , d x⁢z , and d yz orbitals can only produce a FB with a rotated d-orbital basis so that they conform with the underlying kagome lattice symmetry. Most importantly, we demonstrate that both conditions of d-orbital rotation and large CFS can be ideally satisfied by intercalating the kagome lattice with a hexagonal sublattice without disrupting the destructive interference of FB wave function. Furthermore, we propose layered metalorganic frameworks as promising candidate kagome metals to realize FBs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mastering morphology of non-fullerene acceptors towards long-term stable organic solar cells

Despite the rapid progress of organic solar cells based on non-fullerene acceptors, simultaneously achieving high power conversion efficiency and long-term stability for commercialization requires sustainable research effort. Here, we demonstrate stable devices by integrating a wide bandgap electron-donating polymer (namely PTzBI-dF) and two acceptors (namely L8BO and Y6) that feature similar structures yet different thermal and morphological properties. The organic solar cell based on PTzBI-dF:L8BO:Y6 could achieve a promising efficiency of 18.26% in the conventional device structure. In the inverted structure, excellent long-term thermal stability over 1400 h under 85 °C continuous heating is obtained. The improved performance can be ascribed to suppressed charge recombination along with appropriate charge transport. We find that the morphological features in terms of crystalline coherence length of fresh and aged films can be gradually regulated by the weight ratio of L8BO:Y6. Additionally, the occurrence of melting point decrease and reduced enthalpy in PTzBI-dF:L8BO:Y6 films could prohibit the amorphous phase to cluster, and consequently overcome the energetic traps accumulation aroused by thermal stress, which is a critical issue in high efficiency non-fullerene acceptors-based devices. This work provides insight into understanding non-fullerene acceptors-based organic solar cells for improved efficiency and stability.

14 SOLAR ENERGY↗