Search NASA⌕ Search

Engineering topics

Liu, Feng

Publications and source records attributed to Liu, Feng.

At least 145 records · Page 8

Surpassing the 10% efficiency milestone for 1-cm 2 all-polymer solar cells

Naphthalenediimide-based n-type polymeric semiconductors are extensively used for constructing high-performance all-polymer solar cells (all-PSCs). For such all-polymer systems, charge recombination can be reduced by using thinner active layers, yet suffering insufficient near-infrared light harvesting from the polymeric acceptor. Conversely, increasing the layer thickness overcomes the light harvesting issue, but at the cost of severe charge recombination effects. Here we demonstrate that to manage light propagation within all-PSCs, a thick bulk-heterojunction film of approximately 350 nm is needed to effectively enhance photo-harvesting in the near-infrared region. To overcome the severe charge recombination in such a thick film, a non-halogenic additive is used to induce a well-ordered micro-structure that inherently suppresses recombination loss. The combined strategies of light management and delicate morphology optimization lead to a promising efficiency over 10% for thick-film all-PSCs with active area of 1 cm 2 , showing great promise for future large-scale production and application of all-PSCs.

14 SOLAR ENERGY↗

Aggregation‐Induced Multilength Scaled Morphology Enabling 11.76% Efficiency in All‐Polymer Solar Cells Using Printing Fabrication

Abstract All‐polymer solar cells (all‐PSCs) exhibit excellent stability and readily tunable ink viscosity, and are therefore especially suitable for printing preparation of large‐scale devices. At present, the efficiency of state‐of‐the‐art all‐PSCs fabricated by the spin‐coating method has exceeded 11%, laying the foundation for the preparation and practical utilization of printed devices. A high power conversion efficiency (PCE) of 11.76% is achieved based on PTzBI‐Si:N2200 all‐PSCs processing with 2‐methyltetrahydrofuran (MTHF, an environmentally friendly solvent) and preparation of active layers by slot die printing, which is the top efficient for all‐PSCs. Conversely, the PCE of devices processed by high‐boiling point chlorobenzene is less than 2%. Through the study of film formation kinetics, volatile solvents can freeze the morphology in a short time, and a more rigid conformation with strong intermolecular interaction combined with the solubility limit of PTzBI‐Si and N2200 in MTHF results in the formation of a fibril network in the bulk heterojunction. The multilength scaled morphology ensures fast transfer of carriers and facilitates exciton separation, which boosts carrier mobility and current density, thus improving the device performance. These results are of great significance for large‐scale printing fabrication of high‐efficiency all‐PSCs in the future.

Zhu, Lei↗

Comparison of quantum spin Hall states in quasicrystals and crystals

We theoretically review the quantum spin Hall states in an Ammann-Beenker-type octagonal quasicrystal and a periodic snub-square crystal, both sharing the same basic building blocks. While the bulk states show significant differences in localization and transport properties, the topological phases manifest similarly in the two systems. This suggests the robustness of the topological properties regardless of symmetry and periodicity. We characterize the topological nature of the two systems with a nonzero topological invariant (spin Bott index Bs and Z2 invariant), robust metallic edge states, and quantized conductance. In spite of some quantitative differences, the topological phase diagram of the two systems also exhibits similar behaviors, indicating that the topological phase transition is mainly determined by similar interactions in the two systems regardless of their structural difference. This is also reflected by the observation that the transition point between the normal insulator and the quantum spin Hall state in both systems follows a universal linear scaling relation for topological phase transitions.

36 MATERIALS SCIENCE↗

Stabilizing Liquids Using Interfacial Supramolecular Polymerization

The strong electrostatic interactions at the oil–water interface between a small molecule, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin, H 6 TPPS, dissolved in water, and an amine terminated hydrophobic polymer dissolved in oil are shown to produce a supramolecular polymer surfactant (SPS) of H 6 TPPS at the interface with a binding energy that is sufficiently strong to allow an intermolecular aggregation of the supramolecular polymers. SPSs at the oil–water interface are confirmed by in situ real-space atomic force microcopy imaging. The assemblies of these aggregates can jam at the interface, opening a novel route to kinetically trap the liquids in non-equilibrium shapes. The elastic film, comprised of SPSs, wrinkles upon compression, providing a strategy to stabilize liquids in non-equilibrium shapes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic Effects of Side-Chain Engineering and Fluorination on Small Molecule Acceptors to Simultaneously Broaden Spectral Response and Minimize Voltage Loss for 13.8% Efficiency Organic Solar Cells

In this paper, three small molecule (SM)-acceptors (POIT-IC, POIT-IC2F, and POIT-IC4F) are developed by combining the side-chain engineering located on the sp 3 -hybridized carbon atoms of the fused-ring core and the fluorination of end groups. From ITIC to POIT-IC, POIT-IC2F, and then to POIT-IC4F, the SM-acceptors show gradually broadened absorption spectra, increased maximum extinction coefficient, crystallinity, and electron mobilities due to the synergistic effects of side-chain engineering and fluorination. Compared with nonfluorinated ITIC and POIT-IC, as fluorination broadens the molecular spectra, POIT-IC2F and POIT-IC4F with alkoxyphenyl side chains show less decreased LUMO levels than IT-IC2F and IT-IC4F with alkylphenyl side chains, which are conducive to both higher V oc and J sc for organic solar cells (OSCs). Combined with polymer donor PM6, the POIT-IC4F-based OSCs achieve a device efficiency of up to 13.8% with a high V oc of 0.91 V and J sc of 20.9 mA cm –2 , which are significantly higher than that of the control OSCs based on ITIC (8.9%), POIT-IC (10.1%), or IT-IC4F (12.2%). An efficiency of 13.8% is one of the highest PCEs reported for the annealing-free OSCs. Our results show that the synergistic effects of side-chain engineering and fluorination on SM-acceptor can simultaneously broaden spectral response and minimize voltage loss of OSCs and ultimately achieve high device efficiency.

14 SOLAR ENERGY↗

Data-driven subtraction of anisotropic flows in jet-like correlation studies in heavy-ion collisions

Measurements of two-particle azimuthal angle correlations are a useful tool to study the distribution of jet energy loss; however, they are complicated because of the significant anisotropic flow background. We devise a data-driven method for subtracting anisotropic flow background in jet-like correlation analysis. We first require a large recoil momentum (P x ) within a given pseudorapidity (η) range from a high-transverse momentum particle to enhance in-acceptance population of away-side jet-like correlations. Then we take the difference of two-particle correlations in the close region and far region with respect to the η region of P x to subtract the anisotropic flow background. Here, we use a toy model which contains only anisotropic flow and pythia8 which has jets, to demonstrate the validity of our data-driven method. The results indicate that the data-driven method can subtract anisotropic flow effectively.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identification and Characterization of Herbicide Penoxsulam Transformation Products in Aqueous Media by UPLC-QTOF-MS

Photodegradation is an important non-biodegradation process of pesticide degradation in aquatic environments. In this study, the effect of different forms of nitrogen on the photodegradation kinetics of penoxsulam was investigated. The photodegradation of penoxsulam was accelerated by NO{sup 3−} and NO{sup 2−} but was not affected by NH{sup 4+}. Ultra-high-performance liquid chromatography coupled with time-of-flight mass spectrometry was used to separate and identify the transformation products (TPs)converted by photodegradation of penoxsulam in an aqueous solution under UV–Vis (290–800 nm) irradiation. Seven major transformation products were identified based on mass spectral data. The structure was determined by elemental composition calculations, comparison of structural analogs, and existing literature. The main pathways of photodegradation were found to be sulfonamide bond cleavage, rearrangement, triazole ring cleavage, and hydroxylation. These findings are critical to elucidate the environmental fate of penoxsulam in aquatic ecosystems and provide a basis for further environmental risk assessment.

54 ENVIRONMENTAL SCIENCES↗

In-situ synchrotron high energy X-ray diffraction study of phase transformation of intermetallic Ti 3 Sn

Ti 3 Sn has received increasing attention as high damping metallic material. However, information of solid state transformation and crystal structure of Ti 3 Sn were still incomplete. Here, in-situ synchrotron high energy XRD during heating/cooling and during uniaxial compressive loading were used to study the phase transformation of Ti 3 Sn. Thermal-induced reversible phase transformation of Ti 3 Sn was demonstrated, and it was found that such transformation could also be stress (strain) induced. Crystal structure, lattice parameters and atomic Wyckoff positions of new base-centered orthorhombic phase of Ti 3 Sn were suggested based on Rietveld refinement of XRD profiles. Lastly, the phase contents of Ti 3 Sn during heating/cooling processes were also discussed

36 MATERIALS SCIENCE↗

A Lieb-like lattice in a covalent-organic framework and its Stoner ferromagnetism

Abstract Lieb lattice has been extensively studied to realize ferromagnetism due to its exotic flat band. However, its material realization has remained elusive; so far only artificial Lieb lattices have been made experimentally. Here, based on first-principles and tight-binding calculations, we discover that a recently synthesized two-dimensional sp 2 carbon-conjugated covalent-organic framework ( sp 2 c-COF) represents a material realization of a Lieb-like lattice. The observed ferromagnetism upon doping arises from a Dirac (valence) band in a non-ideal Lieb lattice with strong electronic inhomogeneity (EI) rather than the topological flat band in an ideal Lieb lattice. The EI, as characterized with a large on-site energy difference and a strong dimerization interaction between the corner and edge-center ligands, quenches the kinetic energy of the usual dispersive Dirac band, subjecting to an instability against spin polarization. We predict an even higher spin density for monolayer sp 2 c-COF to accommodate a higher doping concentration with reduced interlayer interaction.

36 MATERIALS SCIENCE↗

Proposal of a Nomogram for Predicting Survival in Patients with Siewert Type II Adenocarcinoma of the Esophagogastric Junction After Preoperative Radiation

Background: Preoperative radiotherapy tends to be more frequently used for patients with adenocarcinoma of the esophagogastric junction (AEG); however, the prognostic values of postoperative pathologic characteristics in these patients remain unclear. This study aimed to examine the outcomes in Siewert type II AEG patients receiving preoperative radiotherapy to identify the predictive factors for overall survival (OS). Methods and Results: A total of 1818 AEG patients undergoing preoperative radiotherapy were reviewed. Univariate analyses showed that age, sex, histology, tumor grade, positive lymph node (PLN), lymph node ratio, and log odds of positive lymph nodes (LODDS) were significantly correlated with OS; however, only age, grade, PLN, and LODDS were identified as independent risk factors in a multivariate regression model. Subsequently, patients were randomly grouped into training and validation cohorts (1:1 ratio), and the beta coefficients of these variables in the training set were used to generate the nomogram. The composite nomogram showed improved prognostic accuracy in the training, validation, and entire cohorts compared with that of TNM stage alone. Conclusions: In conclusion, our proposed nomogram represents a promising tool for estimating OS in Siewert type II AEG patients after preoperative radiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Weyl points created by a three-dimensional flat band

Following the discovery of topological insulators (TIs), topological Dirac/Weyl semimetal has attracted much recent interest. A prevailing mechanism for the formation of Weyl points is by breaking time-reversal symmetry (TRS) or spatial inversion symmetry of a Dirac point. Here we demonstrate a generic formation mechanism for Weyl points by breaking TRS of a three-dimensional (3D) TI featured with highly degenerate 3D flat bands (FBs). It is in direct contrast to the conventional view that breaking TRS of a 2D/3D TI leads to a Chern insulator exhibiting quantum anomalous Hall effect. Based on a tight-binding model of pyrochlore lattice, we show that this unusual 3D-FB-enabled Weyl state may contain only a minimum of two Weyl points. Furthermore, using first-principles calculations, we identify this Weyl state in a real material Sn 2 Nb 2 O 7 . The main features of the resulting Weyl points are analyzed with respect to symmetry, topological invariant and surface state. Finally, our finding sheds new light on our fundamental understanding of topological physics and significantly extends the scope of Weyl semimetals to attract immediate experimental interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗