Search NASA⌕ Search

Engineering topics

Liu, Haozhe

Publications and source records attributed to Liu, Haozhe.

At least 19 records

Engineering Active Surface Oxygen Sites of Cubic Perovskite Cobalt Oxides toward Catalytic Oxidation Reactions

Unraveling the role of surface oxygen sites in transition metal oxides during catalytic reactions has always been the focus of environmental and energy chemistry research. For this work, active surface oxygen sites of cubic perovskite cobalt oxide were engineered to comprehend their crucial role and catalytic mechanism at the molecular level. By removing those inert Sr/La–O termination layers, active oxygen sites were exposed on the Co terminated surface of Sr 0.6 La 0.4 CoO 3–δ that furnished the dominant catalytic process of CO oxidation via the Mars–van Krevelen (MvK) mechanism. The fabrication of five-coordinate cobalt ions and the enhanced covalency of Co–O bonds not only optimize the surface electronic structure of Co 3d–O 2p, but also supply active surface oxygen sites, which effectively oxidizes CO to CO 2 with a significantly improved oxidation performance and stability as evidenced by soft/hard XAS, XPS, and O 2 -TPD. Furthermore, online isotopic 18 O 2 mass spectrometry, in situ DRIFTS, and theoretical simulation demonstrate that the activity of surface oxygen sites enhances the kinetics of the MvK reaction, while unsaturated coordination sites from five-coordinate cobalt ions primarily contribute to the activated oxygen molecules and the stable catalytic cycle. The results reported here provide a deep insight into the comprehension of the relationships among active oxygen sites, surface electronic structure, and the reaction mechanism of transition metal oxides necessary for catalytic oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity above 200 K discovered in superhydrides of calcium

Searching for superconductivity with T c near room temperature is of great interest both for fundamental science & many potential applications. Here we report the experimental discovery of superconductivity with maximum critical temperature (T c ) above 210 K in calcium superhydrides, the new alkali earth hydrides experimentally showing superconductivity above 200 K in addition to sulfur hydride & rare-earth hydride system. The materials are synthesized at the synergetic conditions of 160~190 GPa and ~2000 K using diamond anvil cell combined with in-situ laser heating technique. The superconductivity was studied through in-situ high pressure electric conductance measurements in an applied magnetic field for the sample quenched from high temperature while maintained at high pressures. The upper critical field Hc(0) was estimated to be ~268 T while the GL coherent length is ~11 Å. The in-situ synchrotron X-ray diffraction measurements suggest that the synthesized calcium hydrides are primarily composed of CaH 6 while there may also exist other calcium hydrides with different hydrogen contents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗

Chemistry and P-V-T equation of state of FeO 2 H x at the base of Earth’s lower mantle and their geophysical implications

The hydrogen-absorbing ability of a mantle mineral in its structure determines the capacity of the water reservoirs hosted by the mineral. Water reservoirs at the base of Earth’s mantle directly influence the fate of water brought down by slab subduction and the seismic heterogeneity such as ultralow-velocity zones (ULVZs) at the core-mantle boundary. Pyrite-FeO 2 H x (0 ≤ x ≤ 1) presents a possibility of such reservoirs in the deep mantle. Ever since the discovery of this mineral phase, however, its chemistry at the lower mantle conditions has been debated. We conducted kinetics experiments of pyrite-FeO 2 H x dehydrogenation at 110 GPa/2100 K, 110 GPa/2300 K, and 120 GPa/2300 K and P-V-T equation of state analysis using in situ synchrotron X-ray diffraction. We found that x approaches 0.80, 0.75, and 0.79, respectively, at the above conditions. The collective P-V-T data yield K 0 = 241(13) GPa, K' = 4.2(4), dK/dT = –0.028(1) GPa/K, α 0 = 4.32(13) × 10 –5 K –1 , and α 1 = 0.31(10) × 10 –8 K –2 for the composition of x = 0.75 ± 0.04. Our first-principles calculations indicate that FeO 2 H 0.75 with a slightly distorted pyrite structure is stable at 100 GPa. These results indicate that this mineral is likely present in the deep mantle with rather a partially dehydrogenated composition than FeO 2 or FeOOH. Furthermore, the results also clarify the difference between the ULVZs originated from pyrite-FeO 2 H x and those from partial melting in terms of shear and compressional wave seismic velocity reduction ratio δlnV S /δlnV P .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlated High-Pressure Phase Sequence of VO 2 under Strong Compression

Understanding how the structures of a crystal behave under compression is a fundamental issue both for condensed matter physics and for geoscience. Traditional description of a crystal as the stacking of a unit cell with special symmetry has gained much success on the analysis of physical properties. Unfortunately, it is hard to reveal the relationship between the compressed phases. Taking the family of metal dioxides (MO 2 ) as an example, the structural evolution, subject to fixed chemical formula and highly confined space, often appears as a set of random and uncorrelated events. In this work, we provide an alternative way to treat the crystal as the stacking of the coordination polyhedron and then discover a unified structure transition pattern, in our case VO 2 . X-ray diffraction (XRD) experiments and first-principles calculations show that the coordination increase happens only at one apex of the V-centered octahedron in an orderly fashion, leaving the base plane and the other apex topologically intact. The polyhedron evolves toward increasing their sharing, indicating a general rule for the chemical bonds of MO 2 to give away the ionicity in exchange for covalency under pressure.

36 MATERIALS SCIENCE↗

Local structure of liquid gallium under pressure

In situ high energy X-ray pair distribution function (PDF) measurements, microtomography and reverse Monte Carlo simulations were used to characterize the local structure of liquid gallium up to 1.9 GPa. This pressure range includes the well-known solid-solid phase transition from Ga-I to Ga-II at low temperature. In term of previous research, the local structure of liquid gallium within this domain was suggested a mixture of two local structures, Ga I and Ga II, based on fitting experimental PDF to known crystal structure, with a controversy. However, our result shows a distinctly different result that the local structure of liquid gallium resembles the atomic arrangement of both gallium phase II and III (the high pressure crystalline phase). A melting mechanism is proposed for Ga, in which the atomic structure of phase Ι breaks up at the onset of melting, providing sufficient free volume for atoms to rearrange, to form the melt.

Science & Technology - Other Topics↗

Pressure‐induced polyamorphism in lanthanide‐solute metallic glasses

The electronic structure inheritance of lanthanide‐solvent atoms in lanthanide‐based metallic glasses has been proposed. Is a polyamorphism possible in lanthanide‐solute metallic glasses? So far, polyamorphic phase transitions in metallic glass containing lanthanide have been observed only in lanthanide‐solvent metallic glasses. Here, a pressure‐induced transition between two distinct amorphous states, accompanied by a 7% volume collapse at ambient pressure, was observed in La 43.4 Pr 18.6 Al 14 Cu 24 metallic glass, with low lanthanide content, by using in situ X‐ray total scattering method. The transformation also indicated by changes in short range and medium range order. Thus, it is proposed that the lanthanide‐solute metallic glasses also inherit 4 f electronic transition from pure lanthanide element in polyamorphic transition. This discovery offers a supplement to research on lanthanide‐based metallic glasses, which further provides a new perspective of the polyamorphic transformation in metallic glasses containing lanthanide element.

Li, Liangliang↗

Polyamorphism in Yb-based metallic glass induced by pressure

The Yb 62.5 Zn 15 Mg 17.5 Cu 5 metallic glass is investigated using synchrotron x-ray total scattering method up to 38.4 GPa. The polyamorphic transformation from low density to high density with a transition region between 14.1 and 25.2 GPa is observed, accompanying with a volume collapse reflected by a discontinuousness of isothermal bulk modulus. This collapse is caused by that distortional icosahedron short range order precedes to perfect icosahedron, which might link to Yb 4f electron delocalization upon compression, and match the result of in situ electrical resistance measurement under high pressure conditions. Furthermore, this discovery in Yb-based metallic glass, combined with the previous reports on other metallic glass systems, demonstrates that pressure induced polyamorphism is the general behavior for typical lanthanide based metallic glasses.

36 MATERIALS SCIENCE↗