Engineering topics
Liu, J
Publications and source records attributed to Liu, J.
SrRietveld: a program for automating Rietveld refinements for high-throughput powder diffraction studies
Abstract not provided
Factors governing Yb magnetism in Yb{sub 0.95}PtIn{sub 2} and other MgCuAl{sub 2}-type structures
The ternary compound 'YbPtIn{sub 2}' has been synthesized and its crystal structure determined using single crystal X-ray diffraction techniques. The compound crystallizes in the MgCuAl{sub 2} structure, a ternary structure type often formed when rare earth metals, Group 10 transition metals, and indium are present in a 1:1:2 ratio. The unit cell is C-centered orthorhombic, space group Cmcm (no. 63) with lattice parameters of a=4.3410(1) A, b=10.3230(2) A, and c=7.8510(2) A. Evidence is found for a substantial non-stoichiometry on the Yb site, in contrast to the Pt and In sites which behave as expected, and it is believed that the stoichiometry of this compound is more properly described as Yb{sub 0.95}PtIn{sub 2}. Magnetic and resistivity measurements reveal that 'YbPtIn{sub 2}' is a weakly interacting, non-magnetic metal exclusively containing Yb{sup 2+}, and with a resistivity ({rho}) varying from 34 {mu}{Omega} cm at room temperature to a residual resistivity {rho}{sub 0} of 23 {mu}{Omega} cm at 1.8 K. Density functional theory calculations suggest that the observed diamagnetic Yb behavior is expected for this compound, but that certain substitutions on the Pt or In site could help stabilize magnetic Yb{sup 3+} and potentially induce heavy fermion behavior. - Graphical abstract: The crystal structure, magnetic behavior, and temperature-dependent resistivity of the new ternary compound Yb{sub 0.95}PtIn{sub 2.} Highlights: Black-Right-Pointing-Pointer Flux growth method used to produce Yb{sub 0.95}PtIn{sub 2} single crystals. Black-Right-Pointing-Pointer Found rare example of non-stoichiometry in a MgCuAl{sub 2}-type structure. Black-Right-Pointing-Pointer The resistivity and diamagnetic response of Yb{sub 0.95}PtIn{sub 2} were modeled. Black-Right-Pointing-Pointer DFT correctly predicts presence of Yb{sup 2+} in Yb{sub 0.95}PtIn{sub 2}. Black-Right-Pointing-Pointer COHP results suggest other MgCuAl{sub 2}-type indides that may contain paramagnetic Yb{sup 3+}.
Enhanced critical currents in (Gd,Y)Ba2Cu3Ox superconducting tapes with high levels of Zr addition
The critical current and structural properties of (Gd,Y)BaCuO tapes made by metal organic chemical vapor deposition (MOCVD) with Zr addition levels up to 30 at.% have been investigated. The reduction in critical current beyond the previously optimized Zr addition level of 7.5 at.% was found to be due to structural deterioration of the (Gd,Y)Ba2Cu3Ox film. By a modified MOCVD process,enhanced critical current densities have been achieved with high levels of Zr addition,including 3.83 MA cm(-2) in 15 at.% Zr- added 1.1 mu m thick film at 77 K in zero magnetic field. Critical currents as high as 1072 A/ 12 mm have been reached in (Gd,Y) BaCuO tapes with 15 at.% Zr addition at 30 K in a field of 3 T applied perpendicular to the tape,corresponding to a pinning force value of 268 GN m(-3). The enhanced critical currents achievable with a high density of nanoscale defects by employing high levels of second- phase additions enable the performance targets needed for the use of HTS tapes in coil applications involving high magnetic fields at temperatures below 50 K to be met.
The low-temperature, high-magnetic-field critical current characteristics of Zr-added (Gd, Y)Ba2Cu3Ox superconducting tapes
Critical current performances of state-of-the-art Zr-added (Gd, Y)BaCuO tapes have been investigated over a temperature range of 20-77 K, in magnetic fields up to 9 T and over a wide angular range of magnetic field orientations. The peak in critical current that is commonly observed in the field orientation perpendicular to the tape in BaZrO3 (BZO) containing superconducting tapes is found to vanish at 30 K in magnetic fields at 1-9 T. While the critical current of 15% Zr-added tapes was about 40% lower than that of 7.5% Zr-added tapes at 77 K, the pinning force values of the former were found to be 18-23% higher than those of the latter in the temperature range of 20-40 K and in magnetic fields of 3-5 T. The results from this study emphasize the importance of optimization of coated conductor fabrication processes for optimum performance not just in low magnetic fields at 77 K but also at the operating conditions of low temperatures and high magnetic fields that are of interest, especially for rotating superconducting machinery applications.
THE BLANCO COSMOLOGY SURVEY: DATA ACQUISITION, PROCESSING, CALIBRATION, QUALITY DIAGNOSTICS, AND DATA RELEASE
The Blanco Cosmology Survey (BCS) is a 60 night imaging survey of {approx}80 deg{sup 2} of the southern sky located in two fields: ({alpha}, {delta}) = (5 hr, -55 Degree-Sign ) and (23 hr, -55 Degree-Sign ). The survey was carried out between 2005 and 2008 in griz bands with the Mosaic2 imager on the Blanco 4 m telescope. The primary aim of the BCS survey is to provide the data required to optically confirm and measure photometric redshifts for Sunyaev-Zel'dovich effect selected galaxy clusters from the South Pole Telescope and the Atacama Cosmology Telescope. We process and calibrate the BCS data, carrying out point-spread function-corrected model-fitting photometry for all detected objects. The median 10{sigma} galaxy (point-source) depths over the survey in griz are approximately 23.3 (23.9), 23.4 (24.0), 23.0 (23.6), and 21.3 (22.1), respectively. The astrometric accuracy relative to the USNO-B survey is {approx}45 mas. We calibrate our absolute photometry using the stellar locus in grizJ bands, and thus our absolute photometric scale derives from the Two Micron All Sky Survey, which has {approx}2% accuracy. The scatter of stars about the stellar locus indicates a systematic floor in the relative stellar photometric scatter in griz that is {approx}1.9%, {approx}2.2%, {approx}2.7%, and {approx}2.7%, respectively. A simple cut in the AstrOmatic star-galaxy classifier spread{sub m}odel produces a star sample with good spatial uniformity. We use the resulting photometric catalogs to calibrate photometric redshifts for the survey and demonstrate scatter {delta}z/(1 + z) = 0.054 with an outlier fraction {eta} < 5% to z {approx} 1. We highlight some selected science results to date and provide a full description of the released data products.
Status of the Short-Pulse X-ray Project at the Advanced Photon Source
The Advanced Photon Source Upgrade (APS-U) Project at Argonne will include generation of short-pulse x-rays based on Zholents deflecting cavity scheme. We have chosen superconducting (SC) cavities in order to have a continuous train of crabbed bunches and flexibility of operating modes. In collaboration with Jefferson Laboratory, we are prototyping and testing a number of single-cell deflecting cavities and associated auxiliary systems with promising initial results. In collaboration with Lawrence Berkeley National Laboratory, we are working to develop state-of-the-art timing, synchronization, and differential rf phase stability systems that are required for SPX. Collaboration with Advanced Computations Department at Stanford Linear Accelerator Center is looking into simulations of complex, multi-cavity geometries with lower- and higher-order modes waveguide dampers using ACE3P. This contribution provides the current R&D status of the SPX project.
High-power Waveguide Dampers for the Short-Pulse X-Ray Project at the Advanced Photon Source
High-power waveguide dampers have been designed and prototyped for the Short-Pulse X-ray (SPX) cavities at the Advanced Photon Source. The cavities will operate at 2.815 GHz and utilize the TM110 dipole mode. As a result, higher-order (HOM) and lower-order mode (LOM) in-vacuum dampers have been designed to satisfy the demanding broadband damping requirements in the APS storage ring. The SPX single-cell cavity consists of two WR284 waveguides for damping the HOMs and one WR284 waveguide for primarily damping the LOM where up to 2kW will be dissipated in the damping material. The damper designs and high-power experimental results will be discussed in this paper.
Chemical Convention in the Lunar Core from Melting Experiments on the Ironsulfur System
By reanalyzing Apollo lunar seismograms using array-processing methods, a recent study suggests that the Moon has a solid inner core and a fluid outer core, much like the Earth. The volume fraction of the lunar inner core is 38%, compared with 4% for the Earth. The pressure at the Moon's core-mantle boundary is 4.8 GPa, and that at the ICB is 5.2 GPa. The partially molten state of the lunar core provides constraints on the thermal and chemical states of the Moon: The temperature at the inner core boundary (ICB) corresponds to the liquidus of the outer core composition, and the mass fraction of the solid core allows us to infer the bulk composition of the core from an estimated thermal profile. Moreover, knowledge on the extent of core solidification can be used to evaluate the role of chemical convection in the origin of early lunar core dynamo. Sulfur is considered an antifreeze component in the lunar core. Here we investigate the melting behavior of the Fe-S system at the pressure conditions of the lunar core, using the multi-anvil apparatus and synchrotron and laboratory-based analytical methods. Our goal is to understand compositionally driven convection in the lunar core and assess its role in generating an internal magnetic field in the early history of the Moon.
A Poised Chromatin Platform for TGF-[beta] Access to Master Regulators
Specific chromatin marks keep master regulators of differentiation silent yet poised for activation by extracellular signals. We report that nodal TGF-{beta} signals use the poised histone mark H3K9me3 to trigger differentiation of mammalian embryonic stem cells. Nodal receptors induce the formation of companion Smad4-Smad2/3 and TRIM33-Smad2/3 complexes. The PHD-Bromo cassette of TRIM33 facilitates binding of TRIM33-Smad2/3 to H3K9me3 and H3K18ac on the promoters of mesendoderm regulators Gsc and Mixl1. The crystal structure of this cassette, bound to histone H3 peptides, illustrates that PHD recognizes K9me3, and Bromo binds an adjacent K18ac. The interaction between TRIM33-Smad2/3 and H3K9me3 displaces the chromatin-compacting factor HP1, making nodal response elements accessible to Smad4-Smad2/3 for Pol II recruitment. In turn, Smad4 increases K18 acetylation to augment TRIM33-Smad2/3 binding. Thus, nodal effectors use the H3K9me3 mark as a platform to switch master regulators of stem cell differentiation from the poised to the active state.
Plasmonic graphene transparent conductors.
Plasmonic graphene is fabricated using thermally assisted self-assembly of silver nanoparticles on graphene. The localized surface-plasmonic effect is demonstrated with the resonance frequency shifting from 446 to 495 nm when the lateral dimension of the Ag nanoparticles increases from about 50 to 150 nm. Finite-difference time-domain simulations are employed to confirm the experimentally observed light-scattering enhancement in the solar spectrum in plasmonic graphene and the decrease of both the plasmonic resonance frequency and amplitude with increasing graphene thickness. In addition, plasmonic graphene shows much-improved electrical conductance by a factor of 2-4 as compared to the original graphene, making the plasmonic graphene a promising advanced transparent conductor with enhanced light scattering for thin-film optoelectronic devices.
X-ray Diffraction of Cubic Gd2)3/Er under High Pressure
In this paper, we report the in situ high pressure X-ray diffraction studies on Er{sup 3+} doped Gd{sub 2}O{sub 3} in a diamond anvil cell up to 39.8 GPa at room temperature. Several phase transitions have been identified in our studies. The structural transformation from a starting cubic phase to a hexagonal phase occurred during the sample compression process, at 8.57 GPa. And the hexagonal phase was stable from 12.5 GPa up to the highest pressure in this study but was not quenchable and transformed to a monoclinic phase after pressure release. An anomalous high pressure behavior in the hexagonal type Gd{sub 2}O{sub 3} phase was observed, which might be caused by an electron transition influenced by Er{sup 3+} ions doping. By fitting the compression data to the Birch-Murnaghan equation of state, the bulk moduli of the cubic and two hexagonal (at p < 19.9 GPa and p > 27.0 GPa) Gd{sub 2}O{sub 3} phases were determined to be 164 {+-} 3, 185 {+-} 7, and 150 {+-} 10 GPa with B'{sub 0} = 4, respectively.