Search NASA⌕ Search

Engineering topics

Liu, J

Publications and source records attributed to Liu, J.

At least 91 records · Page 5

New optical technology for low mass intelligent trigger and readout.

New optical devices offer the potential for reductions in mass, power, and cost of data paths for on-board trigger and readout of tracking detectors. We give examples of optical modulators, MEMS beam steering devices, and optical coupling. We also present results on radiation hardness of materials as well as different approaches to using optics in triggering.

99 GENERAL AND MISCELLANEOUS↗

Strain-mediated metal-insulator transition in epitaxial ultra-thin films of NdNiO{sub 3}.

We have synthesized epitaxial NdNiO3 ultrathin films in a layer-by-layer growth mode under tensile and compressive strain on SrTiO3 (001) and LaAlO3 (001), respectively. A combination of x-ray diffraction, temperature dependent resistivity, and soft x-ray absorption spectroscopy has been applied to elucidate electronic and structural properties of the samples. In contrast to the bulk NdNiO3, the metal-insulator transition under compressive strain is found to be completely quenched, while the transition remains under the tensile strain albeit modified from the bulk behavior.

36 MATERIALS SCIENCE↗

Berry phase in nonlinear systems

The Berry phase acquired by an eigenstate that experienced a nonlinear adiabatic evolution is investigated thoroughly. The circuit integral of the Berry connection of the instantaneous eigenstate cannot account for the adiabatic geometric phase, while the Bogoliubov excitations around the eigenstates are found to be accumulated during the nonlinear adiabatic evolution and contribute a finite phase of geometric nature. A two-mode model is used to illustrate our theory. Our theory is applicable to Bose-Einstein condensate, nonlinear light propagation, and Ginzburg-Landau equations for complex order parameters in condensed-matter physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong-field double ionization at the transition to below the recollision threshold

We investigate the strong-field double ionization using a semiclassical model, in which the recollision-induced excitation-tunneling (RIET) effect has been taken into account with the Wentzel-Kramers-Brillouin (WKB) approach. When the laser intensity is below the recollision threshold, we find that both RIET and multiple recollisions become significant and can produce the anticorrelated (back-to-back) electron pair. Distinct footprints left by these two mechanisms on the correlated momentum spectra have been identified. As another signature of the transition to below the recollision threshold regime, we find that the V-shaped (or fingerlike) structure in the correlated momentum spectra fades away. Our model calculations have been compared with a recent experiment on argon atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Recent results from the G 0 experiment

We have measured parity violating asymmetries in elastic electron-proton and quasi-elastic electron-deuteron scattering at backward electron angle. These measurements have been done at two momentum transfers : Q 2 = 0.22 and 0.63 (GeV/c) 2 . Together with our previous forward angle measurement [1], we can extract strange quark contributions to the electromagnetic form factors of the nucleon, as well as nucleon axial form factor coming from the neutral weak interaction. The results indicate a strange quark magnetic contribution close to zero at these Q 2 , and a possible non zero strange quark electric contribution for the high Q 2 . The first Q 2 behavior measurement of the nucleon axial form factor in elastic electron scattering shows a good agreement with radiative corrections calculated at Q 2 = 0 and with a dipole form using the axial mass determined in neutrino scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Prevention of nanoscale wear in atomic force microscopy through the use of monolithic ultrananocrystaline diamond probes.

Nanoscale wear is a key limitation of conventional atomic force microscopy (AFM) probes that results in decreased resolution, accuracy, and reproducibility in probe-based imaging, writing, measurement, and nanomanufacturing applications. Diamond is potentially an ideal probe material due to its unrivaled hardness and stiffness, its low friction and wear, and its chemical inertness. However, the manufacture of monolithic diamond probes with consistently shaped small-radius tips has not been previously achieved. The first wafer-level fabrication of monolithic ultrananocrystalline diamond (UNCD) probes with <5-nm grain sizes and smooth tips with radii of 30-40 nm is reported, which are obtained through a combination of microfabrication and hot-filament chemical vapor deposition. Their nanoscale wear resistance under contact-mode scanning conditions is compared with that of conventional silicon nitride (SiN{sub x}) probes of similar geometry at two different relative humidity levels ({approx}15 and {approx}70%). While SiN{sub x} probes exhibit significant wear that further increases with humidity, UNCD probes show little measurable wear. The only significant degradation of the UNCD probes observed in one case is associated with removal of the initial seed layer of the UNCD film. The results show the potential of a new material for AFM probes and demonstrate a systematic approach to studying wear at the nanoscale.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Structural Analysis of Rtt106p Reveals a DNA Binding Role Required for Heterochromatin Silencing

Rtt106p is a Saccharomyces cerevisiae histone chaperone with roles in heterochromatin silencing and nucleosome assembly. The molecular mechanism by which Rtt106p engages in chromatin dynamics remains unclear. Here, we report the 2.5 {angstrom} crystal structure of the core domain of Rtt106p, which adopts an unusual 'double pleckstrin homology' domain architecture that represents a novel structural mode for histone chaperones. A histone H3-H4-binding region and a novel double-stranded DNA-binding region have been identified. Mutagenesis studies reveal that the histone and DNA binding activities of Rtt106p are involved in Sir protein-mediated heterochromatin formation. Our results uncover the structural basis of the diverse functions of Rtt106p and provide new insights into its cellular roles.

59 BASIC BIOLOGICAL SCIENCES↗

Role of a Putative gp41 Dimerization Domain in Human Immunodeficiency Virus Type 1 Membrane Fusion

The entry of human immunodeficiency virus type 1 (HIV-1) into a target cell entails a series of conformational changes in the gp41 transmembrane glycoprotein that mediates the fusion of the viral and target cell membranes. A trimer-of-hairpins structure formed by the association of two heptad repeat (HR) regions of the gp41 ectodomain has been implicated in a late step of the fusion pathway. Earlier native and intermediate states of the protein are postulated to mediate the antiviral activity of the fusion inhibitor enfuvirtide and of broadly neutralizing monoclonal antibodies (NAbs), but the details of these structures remain unknown. Here, we report the identification and crystal structure of a dimerization domain in the C-terminal ectodomain of gp41 (residues 630 to 683, or C54). Two C54 monomers associate to form an asymmetric, antiparallel coiled coil with two distinct C-terminal {alpha}-helical overhangs. This dimer structure is conferred largely by interactions within a central core that corresponds to the sequence of enfuvirtide. The mutagenic alteration of the dimer interface severely impairs the infectivity of Env-pseudotyped viruses. Moreover, the C54 structure binds tightly to both the 2F5 and 4E10 NAbs and likely represents a potential intermediate conformation of gp41. These results should enhance our understanding of the molecular basis of the gp41 fusogenic structural transitions and thereby guide rational, structure-based efforts to design new fusion inhibitors and vaccine candidates intended to induce broadly neutralizing antibodies.

59 BASIC BIOLOGICAL SCIENCES↗

Lithium tetrafluoro oxalato phosphate as electrolyte additive for lithium-ion cells.

Lithium tetrafluoro oxalato phosphate (LTFOP) was investigated as an electrolyte additive to improve the life of mesocarbon microbead (MCMB)/Li{sub 1.1}[Ni{sub 1/3}Co{sub 1/3}Mn{sub 1/3}]{sub 0.9}O{sub 2} (NCM) cells for high power applications. With the addition of 1-3 wt % LTFOP to MCMB/NCM cells, the capacity retention after 200 cycles at 55 C significantly improved. Electrochemical impedance spectroscopy showed that the LTFOP addition in the electrolyte increased the initial impedance but lowered the impedance growth rate during cycling. Aging tests at 55 C indicated that the capacity retention of the negative electrode significantly benefited as a result of the LTFOP addition. Differential scanning calorimetry showed that the safety of the lithiated MCMB is significantly improved with the LTFOP addition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium borate cluster salts as novel redox shuttles for overcharge protection of lithium-ion cells.

Redox shuttle is a promising mechanism for intrinsic overcharge protection in lithium-ion cells and batteries. Two lithium borate cluster salts are reported to function as both the main salt for a nonaqueous electrolyte and the redox shuttle for overcharge protection. Lithium borate cluster salts with a tunable redox potential are promising candidates for overcharge protection for most positive electrodes in state-of-the-art lithium-ion cells.

25 ENERGY STORAGE↗

Structures of SPOP-Substrate Complexes: Insights into Molecular Architectures of BTB-Cul3 Ubiquitin Ligases

In the largest E3 ligase subfamily, Cul3 binds a BTB domain, and an associated protein-interaction domain such as MATH recruits substrates for ubiquitination. Here, we present biochemical and structural analyses of the MATH-BTB protein, SPOP. We define a SPOP-binding consensus (SBC) and determine structures revealing recognition of SBCs from the phosphatase Puc, the transcriptional regulator Ci, and the chromatin component MacroH2A. We identify a dimeric SPOP-Cul3 assembly involving a conserved helical structure C-terminal of BTB domains, which we call '3-box' due to its facilitating Cul3 binding and its resemblance to F-/SOCS-boxes in other cullin-based E3s. Structural flexibility between the substrate-binding MATH and Cul3-binding BTB/3-box domains potentially allows a SPOP dimer to engage multiple SBCs found within a single substrate, such as Puc. These studies provide a molecular understanding of how MATH-BTB proteins recruit substrates to Cul3 and how their dimerization and conformational variability may facilitate avid interactions with diverse substrates.

59 BASIC BIOLOGICAL SCIENCES↗

Phase Constituents of Al-rich U-Mo-Al Alloys Examined by Transmission Electron Microscopy

To supplement the understanding of diffusional interactions involving Al-rich region of the U-Mo-Al system, alloys with composition 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo in at.%, were examined to determine the equilibrium phase constituents at 500?C. These alloys were triple arc-melted, homogenized at 500?C for 200 hours, and water-quenched to preserve the high temperature microstructure. X-ray diffraction, scanning electron microscopy (SEM) with energy dispersive x-ray spectroscopy (XEDS), and transmission electron microscopy (TEM) with high angle annular dark field (HAADF) imaging via scanning transmission electron microscopy (STEM) were employed for the characterization. Alloy specimens for TEM/STEM were prepared using site-specific focused ion beam (FIB) in-situ lift-out (INLO) technique. Despite the homogenization time and temperature, five different phases, namely fcc-Al solid solution, cubic-UAl3, orthorhombic-UAl4, hexagonal-U6Mo4Al43 and diamond cubic-UMo2Al20, were observed. Based on U-Al, U-Mo and Al-Mo binary phase diagrams, previously proposed U-Mo-Al isotherms, and the solidification microstructure of these alloys, the Al-rich region of the equilibrium ternary isotherm at 500?C was constructed. The fcc-Al solid solution, orthorhombic-UAl4, and diamond cubic-UMo2Al20, which were determined to be the equilibrium phases in 85.7Al-11.44U-2.86Mo and 87.5Al-10U-2.5Mo alloys.

99 GENERAL AND MISCELLANEOUS↗

Temporal and spatial resolved optical emission behaviors of a cold atmospheric pressure plasma jet

The propagation behavior of cold atmospheric pressure plasma jets has recently attracted lots of attention. In this paper, a cold He plasma jet generated by a single plasma electrode jet device is studied. The spatial-temporal resolved optical emission spectroscopy measurements are presented. It is found that the emission intensity of the He 706.5 nm line of the plasma behaves similarly both inside the syringe and in the surrounding air (plasma plume). It decreases monotonously, which is different from the emission lines, such as N{sub 2} 337.1 nm line, N{sub 2}{sup +} 391.4 nm line, and O 777.3 nm line. For the discharge inside the syringe, the emission intensity of the He 706.5 nm line decays more rapidly than that of the other three spectral lines mentioned above. The N{sub 2} 337.1 nm line behaves a similar time evolution with the discharge current. For the N{sub 2}{sup +} 391.4 nm line and the atomic O 777.3 nm line, both of them decay slower than that of the He 706.5 nm and the N{sub 2} 337.1 nm. When the plasma plume propagates further away from the nozzle, the temporal behaviors of the emission intensities of the four lines tend to be similar gradually. Besides, it is found that, when the size of the plasma bullet appears biggest, the propagation velocity of the bullet achieves its highest value while the emission intensity of the N{sub 2}{sup +} 391.4 nm line reaches its maximum. Detailed analysis shows that the Penning effect between the metastable state He{sub m} and the air molecules may play a significant role in the propagation of the plasma bullet in the open air.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Classical Aspects in Above-Threshold Ionization with a Midinfrared Strong Laser Field

We present high resolution photoelectron energy spectra of noble gas atoms from high intensity above-threshold ionization (ATI) at midinfrared wavelengths. An unexpected structure at the very low-energy portion of the spectra, in striking contrast to the prediction of the simple-man theory, has been revealed. A semiclassical model calculation is able to reproduce the experimental feature and suggests the prominent role of the Coulomb interaction of the outgoing electron with the parent ion in producing the peculiar structure in long wavelength ATI spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Perspectives of a mid-rapidity dimuon program at the RHIC: a novel and compact muon telescope detector

We propose a large-area, cost-effective Muon Telescope Detector (MTD) at mid-rapidity for the Solenoidal Tracker at RHIC (STAR) and for the next generation of detectors at a possible electron-ion collider. We utilize large Multi-gap Resistive Plate Chambers with long readout strips (long-MRPC) in the detector design. The results from cosmic ray and beam tests show the intrinsic timing and spatial resolution for a long-MRPC are 60-70 ps and {approx} 1 cm, respectively. The performance of the prototype muon telescope detector at STAR indicates that muon identification at a transverse momentum of a few GeV/c can be achieved by combining information from track matching with the MTD, ionization energy loss in the Time Projection Chamber, and time-of-flight measurements. A primary muon over secondary muon ratio of better than 1/3 can be achieved. This provides a promising device for future quarkonium programs and primordial dilepton measurements at RHIC. Simulations of the muon efficiency, the signal-to-background ratio of J/{psi}, the separation of {Upsilon} 1S from 2S+3S states, and the electron-muon correlation from charm pair production in the RHIC environment are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanostructures and Lithium Electrochemical Reactivity of Lithium Titanites and Titanium Oxides: A Review

Being inherently safe and chemically compatible with the electrolyte, titanium oxidebased materials, including both Li-titanites and various TiO2-polymorphs, are considered alternatives to carbonaceous anodes in Li-ion batteries. Given the commercial success of the spinel lithium titanites, TiO2-polymorphs, in particular in nanostructured forms, have been fabricated and investigated for the applications. Nanostructuring leads to increased reaction areas, shortened Li+ diffusion and potentially enhanced solubility/capacity. Integration with an electron conductive second phase into the TiO2-based nanostructures eases the electron transport, resulting in further improved lithium electrochemical activity and the overall electrochemical performance. This paper reviews structural characteristics and Li-electrochemical reactivity, along with synthetic approaches, of nanostructures and nano-composites based on lithium titanites and TiO2-polymorphs that include rutile, anatase, bronze and brookite.

Li-ion battery, anode, TiO2↗